מעגלים משולבים

תת-קטגוריות

📁 ADC/DAC 3,100+ מוצרים 📁 מעגלי מגבר 1,900+ מוצרים 📁 קודקי שמע 18 מוצרים 📁 רכיבי IC לאודיו 2 מוצרים 📁 שעון ותזמון 670+ מוצרים 📁 Comparator ICs 1 מוצרים 📁 DSP 1,100+ מוצרים 📁 מעגלי רכישת נתונים 2 מוצרים 📁 פוטנציומטרים דיגיטליים 4 מוצרים 📁 דרייברים ובקרים לתצוגה 1 מוצרים 📁 FPGA & CPLD 7,300+ מוצרים 📁 מעגלי ממשק 3,400+ מוצרים 📁 דרייברים ל-LED 1 מוצרים 📁 מעגלים לוגיים 460+ מוצרים 📁 מעגלי זיכרון 870+ מוצרים 📁 מיקרו-בקרים 20,000+ מוצרים 📁 מיקרו-מעבדים 4 מוצרים 📁 דרייברי מנוע 1 מוצרים 📁 אחר 1 מוצרים 📁 ממשקי חיישנים וגלאים 1 מוצרים 📁 מעגלים משולבים מתמחים 15 מוצרים 📁 מעגלי משולבים לווידאו 14 מוצרים

מוצרים (39,000+)

EFM32TG225F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs
EFM32TG225F8-BGA48

EFM32TG225F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs

The Silicon Labs EFM32TG225F8-BGA48 is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory and 2 KB of RAM, in a 48-BGA (4x4 mm) surface-mount package. Its supply-voltage range is 1.85 V to 3.8 V. The device belongs to the Tiny Gecko family and is designed for energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. In the EFM32 family hierarchy, this MCU combines an ARM Cortex-M3 processor with embedded Flash and SRAM, while configurable peripherals allow designers to route functions through a shared I/O matrix. This supports compact PCB designs and efficient peripheral sharing in embedded products. The EFM32TG225F8-BGA48 features a single-core 32-bit architecture, 8 KB of Flash, 2 KB of RAM, AES capability, and three operational amplifiers according to the verified distributor data. The 32 MHz Cortex-M3 core provides substantially more processing capability than an 8-bit controller while retaining a simple embedded design. The 48-BGA package reduces board area compared with larger leaded packages but requires careful PCB layout and inspection. Silicon Labs markets the Tiny Gecko platform around low-power operation, fast wake-up behavior, and energy-saving modes. Those characteristics suit battery-operated equipment and compact industrial products where average current consumption matters between active tasks. Exact sleep currents, wake-up timing, GPIO count, and analog performance must be confirmed in the manufacturer datasheet because those values were not included in the supplied verified excerpts. Typical uses include compact sensor nodes, low-power instrumentation, connected maintenance equipment, energy-aware embedded controls, and portable products requiring an efficient 32-bit processor. Three operational amplifiers can support analog signal conditioning when their electrical limits and routing constraints match the application. AES capability can serve secure firmware, authenticated communication, or data-protection routines when used as part of a properly designed security architecture. For PCB design, use a BGA-layout-qualified stackup and route all 48 package balls or pads to the required power, ground, signal, and programming interfaces. Provide clean supplies within 1.85 V to 3.8 V and follow the manufacturer’s decoupling and exposed-pad guidance. Because the complete pin map was not present in the verified data, this page does not infer individual pin functions. This page consolidates verified distributor specifications, package details, sourcing links, comparison data, and practical integration guidance. It separates confirmed facts from unavailable parameters so engineers can make an evidence-based choice without assuming missing flash, memory, pinout, or compliance details.

RFQ צור קשר
EFM32TG225F8-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG225F8-BGA48T

EFM32TG225F8-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG225F8-BGA48T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 KB of Flash memory and 2 KB of RAM, in a 48-BGA (4 x 4 mm) package. Its supply-voltage range is 1.85 V to 3.8 V, while integrated AES encryption and three operational amplifiers support compact, security-conscious analog and control designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. Within the embedded-control hierarchy, the EFM32TG225F8-BGA48T is a 32-bit microcontroller based on the ARM Cortex-M3 RISC architecture. It belongs to the Tiny Gecko family and combines general-purpose embedded processing with energy-saving operating modes, making it suitable for battery-operated and portable products. The principal features include a 32 MHz Cortex-M3 core, 8 KB of Flash program memory, 2 KB of SRAM, AES hardware acceleration, and three integrated operational amplifiers. Silicon Labs specifies run-mode consumption as 150 uA/MHz and stop-mode consumption as low as 0.6 uA. These characteristics allow the MCU to balance responsive processing against low standby demand when an application spends substantial time sleeping between measurements or control actions. The Tiny Gecko architecture also emphasizes autonomous peripherals and broad analog integration. Peripheral activity can reduce the need for continuous central-processor intervention, while the operational amplifiers can handle low-level signal conditioning close to the sensing or drive circuit. This integration helps reduce board size, external component count, and the energy required to move analog signals through a larger external signal chain. Typical uses include battery-powered sensing nodes, compact industrial monitors, low-power wireless-control endpoints, automated test equipment, and embedded instrumentation. The device is particularly appropriate when a design needs a 32-bit control core, short energy-saving-mode transitions, local analog amplification, and hardware-assisted AES without allocating a large external memory subsystem. PCB design should account for the 48-BGA footprint, exposed-pad thermal requirements, and the small 4 x 4 mm body. Keep high-speed traces short, provide a continuous ground reference, route sensitive analog inputs away from switching nodes, and follow the manufacturer pin-description and land-pattern tables when assigning BGA balls and power planes. This product page combines the EFM32TG225F8-BGA48T electrical characteristics, package information, low-power use cases, drop-in family alternatives, and practical implementation guidance. The result supports faster MCU selection, more accurate PCB planning, and clearer decisions between flash-memory configurations and related Tiny Gecko devices.

RFQ צור קשר
EFM32TG225F8-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG225F8-D-BGA48

EFM32TG225F8-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG225F8-D-BGA48 is a 32-bit ARM Cortex-M3 microcontroller in a 48-BGA 4 x 4 mm package. It operates at up to 32 MHz, provides 8 KB of flash memory and 2 KB of RAM, and accepts a 1.98 V to 3.8 V supply. The device also includes AES encryption, three operational amplifiers, and configurable peripheral I/O for compact embedded control designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32TG series belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M3 microcontroller, and energy-conscious embedded processor. Silicon Labs designed the Tiny Gecko family around low-power operation, autonomous peripherals, and extensive analog integration, making it useful for battery-powered equipment and compact industrial systems. The principal features include a 32 MHz ARM Cortex-M3 core, 8 KB flash, 2 KB RAM, AES hardware acceleration, three op-amps, and a 1.98 V to 3.8 V operating range. The 48-BGA package supports dense PCB layouts where external flash, additional analog circuitry, or a larger package would be undesirable. Configurable peripheral I/O allows designers to assign functions such as communication, timers, and serial interfaces to available pins. Power efficiency is a central architecture feature. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 microamp in Stop mode and 150 microamp per MHz in Run mode. These figures make average-current budgeting important: application code, interrupt frequency, peripheral activity, and sleep-mode entry strategy can change total consumption more than the headline CPU frequency alone. Typical uses include low-power sensor nodes, industrial monitoring modules, portable measurement instruments, connected accessories, and compact control boards. The integrated analog resources can reduce the number of external components in low-voltage signal-conditioning systems, while AES support can protect stored or transmitted data without requiring a separate cryptographic accelerator. When designing around this MCU, place decoupling capacitors close to the supply pins and use the package data in the Silicon Labs EFM32TG datasheet for the complete land pattern. Confirm all pin multiplexing, analog limits, and exposed-pad connections in the manufacturer pinout and hardware-design guidance before routing a PCB. This product overview combines the verified device identity, package, memory, clock, voltage, and low-power characteristics with practical guidance for firmware, analog, and PCB implementation. It also distinguishes the available same-family upgrade paths by memory configuration and emphasizes the need to verify pin compatibility before substitution.

RFQ צור קשר
EFM32TG230F16-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG230F16-QFN64

EFM32TG230F16-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG230F16-QFN64 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a 32 MHz operating frequency, 16 KB of flash memory, 4 KB of RAM, AES hardware acceleration, three operational amplifiers, and a 64-QFN 9 x 9 mm package. Its operating supply range is 1.85 V to 3.8 V, making it suitable for low-voltage embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. The EFM32 Tiny Gecko family combines ARM Cortex-M3 processing with energy-conscious peripherals and low-power operating modes. This places it within the hierarchy of microcontroller, embedded processor, 32-bit MCU, and energy-efficient embedded controller. The EFM32TG230F16-QFN64 provides 16 KB of flash for firmware and 4 KB of SRAM for working data. It operates at up to 32 MHz and includes AES encryption, three operational amplifiers, and a range of low-power peripherals. These resources support responsive control, signal conditioning, secure communication, and connected-product designs without requiring a separate host processor. Its Tiny Gecko architecture is designed for energy-sensitive applications by combining fast processing with multiple sleep and shutdown states. The 16 KB flash capacity suits compact control tasks, sensor nodes, battery-powered accessories, and equipment controllers. The operational amplifiers can reduce external signal-conditioning component count, while AES supports hardware-assisted protection for data transferred through connected interfaces. Typical uses include IoT sensor nodes, industrial monitoring devices, low-power consumer accessories, building-control equipment, and portable instruments. Designers can use the Cortex-M3 ecosystem for firmware development, peripheral configuration, debugging, and production programming. The 64-QFN format also supports compact PCB layouts, although exposed-pad thermal management and careful high-speed layout remain important. The main design consideration is memory planning: 16 KB of flash and 4 KB of SRAM suit compact applications but constrain large protocol stacks, graphics buffers, or extensive local data storage. Confirm the final firmware image size, interrupt requirements, peripheral mix, and pin multiplexing before releasing a PCB layout. This product page combines the manufacturer-level device identity with verified package, memory, voltage, frequency, security, and analog features, plus practical design guidance for MCU selection, firmware planning, thermal design, and drop-in replacement assessment.

RFQ צור קשר
EFM32TG230F32-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG230F32-QFN64

EFM32TG230F32-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG230F32-QFN64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB Flash memory, 4 KB RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. The device combines general-purpose embedded processing with energy-saving modes and fast wake-up behavior for energy-sensitive applications. An MCU is a compact semiconductor system containing a processor core, program memory, data memory, peripherals, and communication interfaces. The EFM32TG230 belongs to the Tiny Gecko family, a low-power platform within the broader embedded microcontroller and semiconductor hierarchy. Its Cortex-M3 architecture provides a 32-bit RISC processing environment suitable for control logic, monitoring, and connected embedded products. Key features include a maximum clock frequency of 32 MHz, 32 KB of Flash, 4 KB of RAM, and two 16-bit timers. The manufacturer describes 56 digital I/O pins, giving the 64-QFN device a comparatively dense interface count for its 9 x 9 mm footprint. An operating supply range of 1.85 V to 3.8 V supports both 2.5 V and 3.3 V system designs identified in the verified distributor data. The Tiny Gecko platform emphasizes low-energy operation, including energy-saving modes and fast wake-up times. These characteristics are particularly useful when the controller must alternate between active measurement or control and extended low-power states. The Cortex-M3 core also includes a Memory Protection Unit supporting as many as eight memory segments and a Wake-up Interrupt Controller for servicing interrupts while the CPU is asleep, according to the linked EFM32TG230 datasheet. Typical applications include energy-harvesting equipment, industrial sensing, building automation, environmental monitoring, portable instruments, and connected embedded products. In these systems, the device can execute control logic locally while using its low-power operating modes to reduce average energy consumption. Its 32 KB Flash capacity is suitable for moderate firmware images, while the 4 KB RAM supports working data, stacks, and peripheral buffers. PCB design should account for the exposed thermal pad, supply decoupling, and exposed-pad soldering requirements of the 64-QFN package. Place input and output capacitors close to their associated supply pins, maintain the manufacturer’s land pattern, and provide a low-impedance ground reference. Firmware and hardware revisions should also be checked before replacing this device with another EFM32 member because memory density and temperature-grade suffixes can change functionality or qualification. This page consolidates the verified manufacturer and distributor specifications, separates confirmed facts from unavailable pricing and lifecycle details, and identifies same-family migration candidates for engineering review. It also highlights the package, memory, clock, and low-power constraints that matter when selecting or replacing the EFM32TG230F32-QFN64.

RFQ צור קשר
EFM32TG230F8-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG230F8-D-QFN64

EFM32TG230F8-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG230F8-D-QFN64 is an ARM Cortex-M3 32-bit microcontroller rated for operation up to 32 MHz, with 8 kB Flash memory, 2 kB RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. Its 1.98 V to 3.8 V supply range supports compact, low-energy embedded systems that require efficient processing and broad peripheral integration. A microcontroller, or MCU, is a semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32 Tiny Gecko family belongs to the 32-bit embedded-microcontroller hierarchy, combining an ARM Cortex-M3 core with low-power operating techniques, energy-saving modes, and fast wake-up behavior. These characteristics make the device particularly relevant to battery-powered sensors, compact industrial controls, portable instruments, and wearable systems where energy consumption affects service intervals. The EFM32TG230F8-D-QFN64 includes 8 kB Flash for firmware and 2 kB RAM for working data. Its peripheral set includes two 16-bit timers and 56 digital I/O pins, providing resources for timing, signal acquisition, control outputs, and communication peripherals. The 32 MHz Cortex-M3 processor supports deterministic embedded workloads while the device’s low-power platform helps minimize active energy use between system events. The Tiny Gecko architecture is designed around energy-sensitive operation rather than maximum processor throughput. Fast wake-up from low-energy states can reduce the time the MCU spends at higher power levels in intermittently active systems. Designers can therefore balance processing capability against duty cycle, peripheral activity, and battery capacity when establishing a system-level power budget. Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, compact motor-control interfaces, building-automation nodes, and portable measurement products. The combination of 56 digital I/O pins and two 16-bit timers is useful in designs that connect discrete sensors, indicators, switches, or actuators while avoiding a larger package. A critical design consideration is software and firmware footprint. The 8 kB Flash and 2 kB RAM constrain the available code and data space, so applications should use a compact real-time operating system or bare-metal framework, minimize dynamic allocation, and remove unused peripheral initialization code. Firmware must also respect the device’s documented electrical and clock limits. This product page combines manufacturer specifications, package and sourcing information, drop-in alternatives, comparison criteria, and practical design guidance. It is intended to help engineers evaluate the EFM32TG230F8-D-QFN64 against memory-graded Tiny Gecko options and plan firmware, board-layout, and power-management work before committing the device to a production design.

RFQ צור קשר
EFM32TG230F8-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG230F8-QFN64

EFM32TG230F8-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG230F8-QFN64 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory, 2 KB of RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. It combines a 32-bit RISC core with low-power energy-management techniques, fast wake-up behavior, and energy-saving modes for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and I/O into one device. The EFM32TG230 belongs to the Tiny Gecko family and is positioned between simple 8-bit controllers and higher-resource 32-bit embedded processors. Its Cortex-M3 architecture supports interrupt-driven control, while the integrated Flash, RAM, timers, communication interfaces, and analog peripherals reduce the need for external components. Verified manufacturer and distributor data identifies a 32-bit ARM Cortex-M3 core, 32 MHz maximum speed, 8 KB Flash, 2 KB RAM, 56 digital I/O pins, and two 16-bit timers. The device is suited to energy-sensitive applications that require compact embedded control, low-power operation, and moderate processing performance. Its 64-QFN package also provides a dense land pattern for space-constrained PCB designs. The manufacturer describes the Tiny Gecko platform as using innovative low-energy techniques, fast wake-up times, and energy-saving modes. These characteristics matter in systems that spend substantial time sleeping, such as portable instruments, connected sensors, industrial monitoring nodes, and low-power embedded products. The exact current, voltage, memory, peripheral, environmental, and compliance values not present in the supplied verified data are not inferred here. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact control systems, connected embedded products, and battery-operated devices. Firmware can use the Cortex-M3 interrupt architecture and timers for deterministic control, while low-power modes help reduce energy use between measurement or communication events. Designers should verify the complete electrical limits, pin multiplexing, exposed-pad requirements, decoupling requirements, and firmware-support status against the official Silicon Labs documentation before layout or production release. The supplied sources provide a manufacturer product page, manufacturer-linked technical documentation, and distributor records, but do not provide a complete verified pinout or lifecycle statement. This page consolidates the supplied manufacturer and distributor records, separates verified facts from unavailable data, and adds practical selection and sourcing guidance for engineers evaluating the EFM32TG230F8-QFN64.

RFQ צור קשר
EFM32TG230F8-QFN64T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG230F8-QFN64T

EFM32TG230F8-QFN64T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG230F8-QFN64T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 KB Flash, 2 KB RAM, 56 digital I/O pins, and a 64-QFN 9x9 mm package. It is designed for energy-sensitive applications that require fast wake-up times, low-power operating modes, and a compact surface-mount footprint. The supplied manufacturer information identifies 2 x 16-bit timers and emphasizes the EFM32 low-energy platform. The device also appears with AES and 3 operational amplifiers in distributor listings. An MCU is a semiconductor that integrates a processor core, memory, peripherals, and I/O into one component. The ARM Cortex-M3 class provides a 32-bit processing architecture for embedded control, while the EFM32 family adds energy-management techniques that are useful in battery-operated products. In the product hierarchy, the EFM32TG230F8-QFN64T is an ARM Cortex-M3 microcontroller, an embedded processor, and a semiconductor component. Key verified characteristics include a 32 MHz maximum clock speed, 8 KB Flash memory, 2 KB RAM, 56 digital I/O pins, two 16-bit timers, and a 64-QFN package measuring 9 x 9 mm. The ordering suffix T indicates the tray packaging supplied by the distributor, while the family part number identifies the base EFM32TG230F8-QFN64 device. These specifications suit compact sensor nodes, industrial monitoring, wearable accessories, and portable measurement products. The EFM32TG230 platform supports energy-saving operation and rapid wake-up behavior, making it appropriate when standby current and responsiveness are more important than maximum compute throughput. Its 32 MHz Cortex-M3 core and timer resources are sufficient for protocol handling, digital control, sampling, and supervisory tasks. AES availability can also support secure data handling in connected or battery-powered products, subject to the complete device configuration confirmed in the manufacturer documentation. Designers should allocate the 8 KB Flash and 2 KB RAM carefully, especially when downloading firmware, storing calibration data, or buffering samples. The 64-QFN footprint also requires a land pattern designed for fine-pitch assembly, so exposed-pad soldering and board-layout recommendations should follow the manufacturer package drawing. The verified search data does not provide a complete, pin-by-pin electrical pinout or confirmed operating-temperature details. This product record combines manufacturer-family specifications, distributor package and memory data, available pricing information, and same-package replacement analysis. It is intended to help engineers evaluate the EFM32TG230F8-QFN64T for embedded designs while clearly separating verified facts from parameters that still require confirmation.

RFQ צור קשר
EFM32TG232F16-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG232F16-QFP64

EFM32TG232F16-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG232F16-QFP64 is a 32-bit ARM Cortex-M3 microcontroller rated for operation up to 32 MHz, with 16 kB of embedded Flash memory, 4 kB of RAM, and 53 digital I/O pins in a 64-pin TQFP package. The device belongs to the Tiny Gecko family of low-power microcontrollers and combines energy-saving operating modes with fast wake-up behavior for embedded designs that spend substantial time in sleep. A microcontroller is the central programmable element of an embedded system, integrating a CPU core, nonvolatile program memory, volatile data memory, peripherals, and I/O into one semiconductor package. The ARM Cortex-M3 provides a 32-bit RISC processing architecture, while the Tiny Gecko platform adds low-energy features suited to battery-powered sensors, industrial equipment, consumer controls, and connected products. This device operates from a 1.85 V to 3.8 V supply range. The EFM32TG232F16-QFP64 combines 16 kB Flash, 4 kB RAM, 53 digital I/O pins, and two 16-bit timers in one package. Its 32 MHz maximum CPU speed provides adequate processing performance for protocol handling, data acquisition, local control, and low-complexity user interfaces. The 10 mm by 10 mm TQFP package also exposes 53 digital I/O pins, supporting simultaneous peripheral connections while remaining compatible with conventional surface-mount assembly. Its energy-conscious architecture is the principal technical advantage. The Tiny Gecko family supports energy-saving modes and fast wake-up times, allowing firmware to remain responsive without continuously running the CPU at full clock speed. Applications can therefore balance computational throughput against standby consumption according to the duty cycle of the product. Typical uses include low-power sensor nodes, compact industrial controllers, wearable accessories, meter-management electronics, battery-operated monitoring equipment, and embedded control modules. The combination of Cortex-M3 processing, flexible GPIO, and low-power operation is particularly useful when a design must fit multiple digital interfaces into a limited board area without adding a separate low-power controller. Designers should plan the PCB for the 64-pin TQFP footprint, preserve adequate clearance around adjacent leads, and route high-frequency or sensitive analog signals away from switching nodes. Firmware should use the low-energy modes only after validating wake-up sources, clock transitions, and peripheral states. Component compatibility requires checking the complete Silicon Labs pinout and peripheral table before substituting another EFM32 device. This product page consolidates the key electrical, memory, package, and low-power characteristics with practical implementation guidance. It also distinguishes verified same-footprint alternatives from functionally similar devices, helping engineers evaluate replacement options without treating a different microcontroller family as a true drop-in substitute.

RFQ צור קשר
EFM32TG232F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG232F32-QFP64

EFM32TG232F32-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG232F32-QFP64 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, 53 digital I/O pins, and a 64-pin TQFP package. It combines deterministic microcontroller operation with energy-saving modes and fast wake-up behavior for embedded systems that must balance responsiveness, processing performance, and power consumption. A microcontroller is a programmable semiconductor containing a processor core, memory, peripherals, and I/O in one integrated device. The EFM32TG232F32-QFP64 belongs to the Tiny Gecko family and provides a compact platform for low-power embedded control. Its architecture supports connected sensors, industrial monitoring, portable instruments, and embedded control products where low standby consumption is valuable. The principal device ratings include a 32 MHz Cortex-M3 core, 32 kB Flash, 4 kB RAM, and 53 digital I/O pins. Two 16-bit timers are included for periodic events, timing measurements, and control-loop tasks. The 64-pin TQFP package exposes substantially more I/O than smaller MCU packages and is suitable for boards requiring mixed analog, digital, serial, and external-memory connections. Its low-power platform includes energy-saving modes and fast wake-up operation, making it appropriate for systems that spend most of their operating life asleep. The 32 MHz Cortex-M3 core provides useful control and response performance without requiring a more complex processor architecture. Flash retains firmware without volatile memory, while 4 kB of SRAM supports working state, stack operations, buffers, and peripheral data handling. Typical applications include industrial sensor nodes, portable measurement equipment, building controls, low-power consumer accessories, and compact control boards. The larger I/O count can simplify designs that otherwise require an I/O expander. Two timers are particularly useful for pulse measurement, motor or actuator timing, periodic sampling, and real-time control tasks. PCB design should preserve the device power rails and decoupling requirements stated in the manufacturer datasheet. Place the required input and output capacitors close to their associated pins, route sensitive signals away from fast-switching nodes, and confirm every exposed signal assignment against the official 64-pin pinout before fabrication. This page combines manufacturer specifications, same-package replacement analysis, application guidance, and design considerations to support faster MCU selection and board planning. Verify temperature limits, peripherals, electrical limits, and package details in the manufacturer documentation before releasing production hardware.

RFQ צור קשר
EFM32TG232F8-D-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG232F8-D-QFP64

EFM32TG232F8-D-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG232F8-D-QFP64 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, and 53 digital I/O pins in a 64-TQFP 10 x 10 mm package. The -D suffix identifies the device configuration within the EFM32 Tiny Gecko family. Its combination of a 32 MHz Cortex-M3 core, energy-saving modes, fast wake-up behavior, and compact 64-pin package makes it suitable for embedded control, sensor monitoring, communications, and low-power consumer equipment. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor integrated with memory, peripherals, and interrupt-driven control hardware in one semiconductor package. The Cortex-M3 core belongs to the ARM processor hierarchy and is designed for compact embedded systems. Within the broader semiconductor category, the EFM32TG232F8-D-QFP64 is a microcontroller IC, while its platform includes timers, GPIO, communications peripherals, analog functions, and multiple low-power operating modes that support battery-operated and energy-conscious designs. The device provides 8 kB of Flash for firmware, 2 kB of RAM for working data, and 53 digital I/O pins for external interfaces. Two 16-bit timers support periodic timing, input capture, output compare, and other embedded control functions. Its operating supply range of 1.98 V to 3.8 V allows use from a regulated 3 V rail, while the 32 MHz maximum CPU speed provides sufficient processing capability for protocol handling, state machines, sampling, and supervisory control. The Tiny Gecko architecture emphasizes energy efficiency rather than only maximum clock speed. Silicon Labs identifies low-energy techniques, fast wake-up times, and energy-saving modes as defining characteristics of the device. These features are relevant in systems that spend most of their operating cycle asleep and must respond promptly to external events. The 53 GPIO count also allows a compact design to connect sensors, indicators, user inputs, communications devices, and actuators without immediately requiring an external GPIO expander. Typical applications include battery-powered sensor nodes, industrial monitoring terminals, compact access controls, environmental measurement instruments, wearable accessories, and connected embedded products. The 10 x 10 mm TQFP package provides enough I/O and perimeter area for mixed-signal and communication-oriented designs while remaining manageable for cost-controlled manufacturing. Firmware should use the low-power modes when the product specification calls for long standby intervals and minimized average energy consumption. Designers should verify clock, peripheral, and pin assignments against the manufacturer pinout table before laying out the PCB. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and preserve the ground-return path required by each communication interface. The 1.98 V to 3.8 V supply range also means that level-shifting or rail-sequencing decisions must match the voltage tolerance of every attached peripheral. This product page combines the manufacturer’s core device specifications, package details, application guidance, practical design notes, and qualified same-family replacement analysis. It is intended to help engineers evaluate the EFM32TG232F8-D-QFP64 for embedded designs, identify the limits of drop-in substitution, and move from component selection to a reliable PCB implementation.

RFQ צור קשר
EFM32TG232F8-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG232F8-QFP64

EFM32TG232F8-QFP64 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG232F8-QFP64 is a 32 MHz ARM Cortex-M3 Tiny Gecko microcontroller with 8 kB Flash, 2 kB RAM, 53 digital I/O pins, and a 64-TQFP 10 x 10 mm package. It operates from a 1.85 V to 3.8 V supply and is designed for energy-sensitive embedded systems. The device provides two 16-bit timers and a hardware AES engine, while its low-power architecture supports fast wake-up and energy-saving modes for battery-operated equipment. A microcontroller is an embedded-system semiconductor that integrates a processor core, program memory, data memory, peripherals, and I/O into one device. The EFM32TG232F8-QFP64 belongs to the Tiny Gecko family and uses the ARM Cortex-M3 processor. In the product hierarchy, it is a 32-bit microcontroller, a general-purpose processor-based IC, and ultimately a semiconductor intended to control sensors, communications, user interfaces, and other embedded-system functions. Key features include a maximum 32 MHz operating speed, 8 kB of Flash organized as 8K x 8, 2 kB of SRAM, 53 digital I/O pins, and hardware AES capability. Its 1.85 V to 3.8 V operating range accommodates low-voltage portable systems. The combination of 53 I/O pins and two 16-bit timers is useful in designs that need multiple peripheral connections without moving to a larger package. Technically, the Cortex-M3 core provides a compact 32-bit architecture suitable for real-time control. Silicon Labs' Tiny Gecko platform adds low-energy operating techniques intended to reduce both active and idle consumption. The 2 kB SRAM and 8 kB Flash limits determine the code and working-data budget, making this MCU most appropriate for compact control tasks rather than graphics-intensive, high-bandwidth, or large protocol-stack applications. Typical applications include low-power sensor nodes, compact industrial controllers, energy-monitoring instruments, connected accessories, and portable accessories. The 53 digital I/O pins support peripheral interconnection, while two timers provide timing for pulse generation, input capture, or periodic control tasks. AES hardware can offload supported encryption operations when application security requirements justify it. Designers should account for the small 8 kB Flash and 2 kB RAM budgets, verify every peripheral pin against the 64-TQFP pinout, and use the manufacturer reference configuration for decoupling and programming. A PCB change to another MCU should not be attempted without a complete peripheral, timing, memory, and pin-level migration review.

RFQ צור קשר
EFM32TG232F8-QFP64T - 32MHz Cortex-M3 MCU, 8KB Flash, 64-TQFP | Silicon Labs
EFM32TG232F8-QFP64T

EFM32TG232F8-QFP64T - 32MHz Cortex-M3 MCU, 8KB Flash, 64-TQFP | Silicon Labs

The Silicon Labs EFM32TG232F8-QFP64T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz with 8 kB of Flash, 2 kB of SRAM and 53 digital I/O pins, housed in a 64-pin TQFP (10 x 10 mm) surface-mount package. It is a member of the EFM32 Tiny Gecko family, a low-power 32-bit MCU line designed around energy-sensitive embedded applications. A microcontroller (MCU) is a single integrated circuit that combines a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog blocks. It sits at the bottom of the embedded hierarchy: MCU -> 32-bit microcontroller -> ARM Cortex-M core -> embedded processor -> semiconductor. Because the EFM32TG232 integrates its own memory, clocking, and peripherals, it replaces a discrete processor-plus-support-chip design and reduces both board area and total system power. Key features of the EFM32TG232F8-QFP64T include an on-chip hardware AES encryption accelerator, three integrated operational amplifiers, and two 16-bit general-purpose timers alongside the ARM Cortex-M3 core. The Tiny Gecko platform adds dedicated low-energy techniques, fast wake-up times, and multiple energy-saving modes so the same part can serve both always-on sensing duty cycles and short burst-processing windows. Technically, the device runs a 32-bit RISC Cortex-M3 pipeline at up to 32 MHz with a 2.5 V / 3.3 V supply option, giving designers a single 3.3 V rail design with margin. The 53 digital I/O pins spread across 64 leads provide generous connectivity for sensors, discrete actuators, and status indication without an external I/O expander, while the integrated op-amps allow direct conditioning of analog front-end signals. Typical applications include battery-powered IoT and smart-home sensor nodes, industrial condition monitoring and data acquisition, energy metering, portable medical instrumentation, and LED lighting control. The 64-TQFP package is a good fit for prototypes and cost-driven designs where fine-pitch QFN assembly is not wanted. When designing around this MCU, budget flash and SRAM carefully: 8 kB of Flash and 2 kB of RAM must hold the application code, the boot path, and any data buffering. Decouple the supply pins close to the device with a bulk ceramic plus a high-frequency bypass capacitor, and keep the 53 I/O routes short so switching edges do not disturb adjacent analog channels served by the internal op-amps. This page brings together device specifications, same-package drop-in options, comparison tables, and practical design notes in one place, giving engineers a faster path from part selection to a working low-power board.

RFQ צור קשר
EFM32TG822F16-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG822F16-QFP48

EFM32TG822F16-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG822F16-QFP48 is an ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 16 kB of Flash memory, 4 kB of RAM, 37 digital I/O pins, and a 48-pin TQFP package measuring 7 mm by 7 mm. It combines a low-power architecture, fast wake-up capability, and energy-saving modes for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32TG822F16-QFP48 belongs to the Tiny Gecko family within Silicon Labs' EFM32 low-power MCU portfolio. Its ARM Cortex-M3 core provides 32-bit processing, while its peripheral set supports energy-sensitive, battery-operated, industrial, and connected embedded products. The device operates at up to 32 MHz and includes 16 kB of Flash for firmware, 4 kB of RAM for working data, and 37 digital I/O pins. Silicon Labs identifies two 16-bit timers among the integrated resources. These characteristics make the microcontroller suitable for control loops, human-interface devices, sensor nodes, portable instruments, and compact automation products that need deterministic peripheral access without a large external memory footprint. The Tiny Gecko platform emphasizes energy efficiency through low-energy operating techniques, rapid wake-up from energy-saving modes, and multiple sleep-oriented modes. These features help reduce the energy required between user interactions or sensor measurements. The Cortex-M3 processor and configurable peripheral architecture also allow the same device family to address battery-powered consumer products as well as embedded industrial equipment. Typical uses include low-power sensor hubs, building-control nodes, compact motor-control interfaces, handheld measurement products, wearable accessories, and battery-operated security devices. The 48-pin TQFP footprint exposes substantially more I/O than smaller leadless packages, making it useful when a design needs external displays, buttons, communications transceivers, analog front ends, or multiple digital peripherals. Designers should select capacitors, oscillator components, and I/O levels according to the manufacturer datasheet, and should preserve the recommended power and decoupling layout for reliable operation. Firmware development requires a Cortex-M3-compatible toolchain and the appropriate Silicon Labs configuration and debug environment. Before production, verify the selected flash variant, operating-temperature grade, peripheral availability, and package pin assignments against the exact ordering information. This product page consolidates the principal specifications, verified manufacturer and distributor references, drop-in candidates, application guidance, and design cautions for EFM32TG822F16-QFP48. It is intended to accelerate engineering evaluation while making the differences among same-family Silicon Labs options easier to evaluate.

RFQ צור קשר
EFM32TG822F32-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG822F32-QFP48

EFM32TG822F32-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG822F32-QFP48 is a 32 MHz ARM Cortex-M3 microcontroller with 32 KB of Flash memory, 4 KB of RAM, and 37 digital I/O pins, housed in a 48-pin TQFP package measuring 7 x 7 mm. The EFM32TG822F32-QFP48 combines a 32-bit MCU core, low-power operation, fast wake-up capability, an AES-equipped peripheral set, an LCD interface, three op amps, and two 16-bit timers in one compact surface-mount device. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into a single device used to control embedded systems. The ARM Cortex-M3 core provides a 32-bit processing architecture for control tasks, while the EFM32 Tiny Gecko platform adds energy-saving modes and fast wake-up behavior. This hierarchy places the device within the MCU category, where low-power embedded control, peripheral integration, and compact package design determine suitability. The principal features include operation up to 32 MHz, 32 KB of Flash for firmware, 4 KB of SRAM for working data, and 37 digital I/O pins. The device also supports an 8 x 11 LCD interface, hardware AES capability, three operational amplifiers, and two 16-bit timers. These resources allow a design to consolidate functions that might otherwise require separate display controllers, encryption hardware, analog amplifiers, and timer ICs. Silicon Labs bases the EFM32TG822F32-QFP48 on the EFM32 Tiny Gecko low-power platform. The architecture is intended to balance responsive processing with restricted current consumption in systems that spend substantial time in low-energy states. Its combination of Cortex-M3 instruction-set support, integrated analog and security resources, and a 7 x 7 mm TQFP footprint supports compact control designs without external peripheral duplication. Typical uses include energy-conscious industrial control modules, battery-powered sensing equipment, compact human-machine-interface controllers, security-aware embedded nodes, and low-power IoT products. The LCD interface is particularly useful for local status displays, while the AES hardware can accelerate cryptographic operations. The three op amps support analog signal conditioning close to the sensing or actuator interface, reducing external analog component count. Designers should review the manufacturer datasheet pin-description table before assigning board functions and should account for the exposed power, ground, reset, and programming connections in the PCB layout. Stable decoupling close to the supply pins and a compliant programming interface are essential for reliable operation. Software configuration should also use the low-energy modes and wake-up sources appropriate to the product's duty cycle. This page combines manufacturer specifications, package details, verified sourcing links, drop-in replacement analysis, and practical design guidance in one engineering reference. It supports faster MCU selection by placing memory, LCD, AES, analog, timing, and low-power capabilities alongside PCB and purchasing considerations.

RFQ צור קשר
EFM32TG822F8-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG822F8-D-QFP48

EFM32TG822F8-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG822F8-D-QFP48 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a 32 MHz processor, 8 KB of flash memory, 2 KB of RAM, and a 48-pin TQFP package measuring 7 mm by 7 mm. The device is designed for compact embedded systems that require efficient processing, low-power operation, and integrated mixed-signal peripherals without requiring a large external memory interface. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-computing processor commonly used in embedded control systems. The Cortex-M3 belongs to the ARM processor family and combines deterministic interrupt handling, compact code density, and an integrated ecosystem for firmware development. The EFM32TG series adds Silicon Labs' Tiny Gecko architecture, energy-management peripherals, and configurable I/O to create a low-power microcontroller platform for battery-operated and energy-conscious products. The EFM32TG822F8-D-QFP48 operates at up to 32 MHz and provides 8 KB of flash program memory and 2 KB of SRAM. Its 37 configurable I/O locations support digital communication, sensing, control, and general-purpose peripheral functions. The device can operate from 2.5 V or 3.3 V supply rails and is specified for an ambient operating range of -40°C to +85°C. Its 48-TQFP surface-mount package provides a practical option for compact industrial, consumer, and embedded-control assemblies. Low-power operation is a defining characteristic of the EFM32TG family. The manufacturer datasheet reports consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. Autonomous peripherals allow selected activities to continue without constant CPU intervention, helping reduce overall energy use in systems that alternate between active measurement and extended low-power intervals. Typical applications include connected sensor nodes, compact industrial controllers, low-power data loggers, battery-operated monitoring equipment, and embedded accessories that require a mix of analog-capable peripherals, communication interfaces, and general-purpose I/O. The 8 KB flash capacity is most appropriate for focused firmware rather than complex graphical workloads or large application code sets. When designing around this microcontroller, use the pin-description table in the manufacturer datasheet when assigning board functions, and reserve the exposed programming and debug interface for reliable programming and field diagnostics. Place bypass capacitors close to the supply pins and keep sensitive analog or communication traces away from fast-switching nodes to reduce coupling. This product page combines the EFM32TG822F8-D-QFP48 specifications, package information, application guidance, drop-in family alternatives, and engineering-oriented design notes. It is intended to help hardware engineers assess processor performance, memory capacity, power behavior, package compatibility, and PCB implementation before selecting the device for a new embedded design.

RFQ צור קשר
EFM32TG822F8-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG822F8-QFP48

EFM32TG822F8-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG822F8-QFP48 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, and 37 digital I/O pins in a 48-TQFP 7 x 7 mm package. It combines a low-power embedded platform with fast wake-up behavior, energy-saving modes, and two 16-bit timers for compact embedded control. A microcontroller is a programmable integrated circuit that combines a processor core, memory, digital I/O, timers, and communication peripherals in one device. The EFM32TG822F8 belongs to the Tiny Gecko family and sits within the hierarchy of ARM Cortex-M3 microcontroller, embedded processor, and integrated semiconductor. Its 32 MHz processing rate supports responsive control logic while its low-power design targets battery-operated and energy-sensitive equipment. The verified feature set includes an ARM Cortex-M3 core, operation up to 32 MHz, 8 kB Flash, 2 kB RAM, 37 digital I/O pins, and two 16-bit timers. The supplied operating range is 1.85 V to 3.8 V, with a temperature range of -40 °C to 85 °C. These figures make the device suitable for low-voltage embedded products, sensor nodes, portable instruments, and compact industrial control modules. The EFM32TG822F8-QFP48 is identified as a surface-mount 48-TQFP device. The manufacturer product page describes a low-power platform with innovative low-energy techniques, fast wake-up times, and energy-saving modes. Those characteristics distinguish it from general-purpose microcontrollers focused only on processing throughput: the design emphasizes both control capability and energy efficiency in embedded systems. Typical applications include low-power sensor interfaces, portable measurement equipment, small motor-control systems, battery-powered instruments, and embedded IoT nodes. Its 37 digital I/O pins provide substantial external connectivity for sensors, indicators, switches, and actuators, while the two timers can support periodic measurement, timing, or basic control functions. Firmware selection should confirm the required peripheral set before design release. Designers should use the manufacturer datasheet for the complete pin map, electrical limits, peripheral availability, memory map, and recommended decoupling. Because the verified sources identify a 48-pin package but do not provide a complete pin table, pin-level claims should not be inferred. The 1.85 V to 3.8 V supply range also requires regulators and bypass networks that remain valid across the intended operating temperature range. This product page consolidates the verified manufacturer description, distributor specifications, package data, sourcing information, and application guidance. It also separates confirmed parameters from unavailable details, helping engineers compare the MCU with alternatives without treating unverified assumptions as drop-in compatibility.

RFQ צור קשר
EFM32TG822F8-QFP48T - 32MHz Cortex-M3 8KB MCU | Silicon Labs
EFM32TG822F8-QFP48T

EFM32TG822F8-QFP48T - 32MHz Cortex-M3 8KB MCU | Silicon Labs

The Silicon Laboratories EFM32TG822F8-QFP48T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at 32 MHz, with 8 KB of flash memory and 2 KB of RAM, housed in a 48-pin TQFP package measuring 7 mm by 7 mm. Its operating supply range is 1.85 V to 3.8 V, making it suitable for compact embedded systems that use low-voltage 2.5 V or 3.3 V power rails. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one device. The EFM32TG822F8 belongs to the EFM32 Tiny Gecko family, where Tiny Gecko devices are ARM Cortex-M3 microcontrollers positioned for low-power embedded control. The EFM32 family hierarchy extends from this device to general-purpose embedded MCUs, which are semiconductor components used for sensing, control, communication, and user-interface functions. The EFM32TG822F8-QFP48T includes 8 KB of flash organized as 8K x 8, 2 KB of RAM, an 8-by-11 LCD interface, AES hardware support, and three operational amplifiers according to the manufacturer-related component listing. These peripherals allow firmware to drive segmented displays, perform secure data handling, and condition low-level analog signals without requiring several separate discrete devices. The core runs at 32 MHz and supports an ARM Cortex-M3 architecture with a 32-bit instruction set. The supplied manufacturer specifications identify the device as a single-core Tiny Gecko MCU in the Tiny Gecko series. Its combination of 8 KB flash and 2 KB RAM is appropriate for compact control tasks, sensor nodes, simple user-interface controllers, and connected accessories where code and data storage requirements are modest. Typical applications include energy meters, industrial sensor interfaces, small display controllers, wearable accessories, battery-powered equipment, and low-cost embedded control modules. The LCD interface is particularly useful for products requiring a local alphanumeric or segmented display, while AES support can assist with authenticated communication or encrypted data handling when used with an appropriate software stack. Designers should account for the 1.85 V to 3.8 V supply range, confirm the exact peripheral assignments and alternate functions against the device pinout, and provide suitable decoupling close to the supply pins. The TQFP-48 footprint also requires a PCB land pattern with adequate thermal copper and assembly clearance for its 0.5 mm pitch leads. This product page combines the core manufacturer specifications with application guidance, package information, replacement analysis, and practical design notes. It is intended to help engineers evaluate the EFM32TG822F8-QFP48T for low-power embedded designs, identify same-footprint alternatives, and plan sourcing through the XAIPART Request a Quote form.

RFQ צור קשר
EFM32TG825F16-BGA48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG825F16-BGA48

EFM32TG825F16-BGA48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG825F16-BGA48 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 KB of flash memory, 4 KB of RAM, and a 48-BGA package measuring 4 mm by 4 mm. It belongs to the Tiny Gecko family of low-power embedded processors and combines a compact package with energy-focused sleep modes, hardware security, and peripheral integration for compact control systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication interfaces, timers, and analog or mixed-signal peripherals. In the embedded-device hierarchy, the EFM32TG825F16-BGA48 is an ARM Cortex-M3 microcontroller, a 32-bit embedded processor, and a member of the power-conscious Tiny Gecko platform. Its role is to execute application firmware while coordinating sensors, communications, human interfaces, and actuator-control functions within a battery-operated or energy-limited product. Key features include a 32 MHz ARM Cortex-M3 core, 16 KB flash, 4 KB RAM, and operation from a 1.85 V to 3.8 V supply. The device also provides a deep-sleep current of 1.0 µA at 3 V when the 32.768 kHz oscillator, real-time clock, power-on reset, brown-out detector, RAM, and CPU retention are included in the measurement. Its 48-BGA package supports dense PCB layouts while exposing the family’s mixed-signal and communications capabilities. The Tiny Gecko architecture emphasizes efficient execution, rapid peripheral operation, and multiple low-energy modes. A 32 MHz Cortex-M3 core is suitable for control loops, communication protocols, state machines, and modest signal-processing workloads. The 4 KB of RAM provides working space for stacks and application variables, while the 16 KB of flash accommodates firmware and configuration data. These capacities should be checked against the final code size and protocol-buffer requirements during design planning. Typical applications include low-power sensor nodes, compact industrial instrumentation, connected industrial equipment, energy-conscious consumer products, and small systems with display or communications requirements. The 48-BGA footprint is particularly useful when board area is constrained. In these systems, the MCU can manage acquisition, local control, protocol handling, and power-state transitions while preserving state during selected sleep periods. Designers should follow the manufacturer pin description and recommended decoupling guidance when assigning the 48-ball footprint. The 1.85 V to 3.8 V operating range defines the usable external supply envelope, while brown-out detection helps supervise system rails. Confirm peripheral availability, pin multiplexing, memory requirements, and startup behavior against the manufacturer datasheet for the exact ordering code before releasing the PCB layout. This page combines the exact ordering-code characteristics with package-level guidance, low-power design considerations, verified drop-in alternatives, and a parameter comparison. It helps engineers identify whether the EFM32TG825F16-BGA48 fits a compact, low-power Cortex-M3 design and how closely related ordering variants differ.

RFQ צור קשר
EFM32TG825F32-BGA48 - 32MHz Low-Power MCU | Silicon Labs
EFM32TG825F32-BGA48

EFM32TG825F32-BGA48 - 32MHz Low-Power MCU | Silicon Labs

Silicon Labs EFM32TG825F32-BGA48 is a low-power, 32-bit ARM Cortex-M3 microcontroller operating at up to 32 MHz, with 32 KB of flash memory and a 48-BGA package measuring 4 x 4 mm. The device is designed for compact, energy-sensitive embedded systems that require fast processing, low-power operation, LCD support, and hardware AES capability. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces onto one package. The EFM32TG825 belongs to the Tiny Gecko family, a low-power microcontroller platform built around the ARM Cortex-M3 architecture. This hierarchy places it within embedded processors, microcontrollers, and energy-efficient IoT control devices. The EFM32TG825F32-BGA48 combines a 32 MHz Cortex-M3 core with 32 KB of flash organized as 32K x 8. Its feature set includes an LCD controller and AES hardware, making it suitable for compact human-interface equipment, secure data collection, industrial sensing, and connected devices. A 2.5 V or 3.3 V supply configuration supports integration into conventional embedded systems. The 48-BGA package supports compact, high-density layouts where board area is limited. Its 4 x 4 mm dimensions make the MCU suitable for wearable electronics, small sensor nodes, metering equipment, and compact industrial controllers. Designers should allocate the footprint, pin assignments, exposed thermal requirements, and programming interfaces according to the manufacturer package drawing before layout release. Typical applications include battery-powered sensor nodes, portable measurement instruments, small LCD instruments, industrial monitoring terminals, energy-management controllers, and secure wireless-sensor endpoints. The combination of a 32 MHz processing core, integrated flash, LCD support, and AES acceleration reduces external component requirements where those functions are needed. The principal design consideration is system-level power management. Engineers should select capacitors, clocking components, and external interfaces according to the manufacturer reference schematic, and should verify signal levels and programming connections against the 48-BGA pad layout. Adequate exposed-area thermal management and clean high-frequency routing remain important in compact boards. This product page combines device specifications, focused application guidance, verified cross-reference candidates, package details, and practical design notes. It also distinguishes electrically documented drop-in candidates from options whose firmware, peripheral mapping, or qualification still requires design review.

RFQ צור קשר
EFM32TG825F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs
EFM32TG825F8-BGA48

EFM32TG825F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs

The Silicon Labs EFM32TG825F8-BGA48 is an ARM Cortex-M3 Tiny Gecko 32-bit microcontroller rated up to 32 MHz, with 8 KB Flash, 2 KB RAM, 37 digital I/O pins, and a 48-BGA 4x4 mm package. It is designed for energy-sensitive embedded systems that require low-power operation, fast wake-up behavior, and integrated analog and communications peripherals. What is a Tiny Gecko microcontroller? A Tiny Gecko MCU is a low-power 32-bit embedded controller built around the ARM Cortex-M3 processor core. It belongs to the hierarchy microcontroller -> embedded processor -> ARM Cortex-M microcontroller -> low-power MCU. The EFM32TG825F8-BGA48 combines general-purpose control, timing, analog conversion, and serial-interface functions in one compact device for applications such as sensor nodes, industrial controllers, consumer accessories, and connected embedded products. Key features include an ARM Cortex-M3 core operating up to 32 MHz, 8 KB Flash memory, 2 KB RAM, 37 digital I/O pins, two 16-bit timers, a 4x12-bit ADC, and a 1x12-bit DAC according to the available manufacturer and distributor data. The device also supports 2.5 V and 3.3 V supply configurations. Its BGA package reduces board footprint compared with larger leaded packages, although assembly and inspection require suitable manufacturing capability. The Silicon Labs Tiny Gecko platform emphasizes energy efficiency through low-power techniques and sleep-oriented operation. The EFM32TG825F8-BGA48 is therefore suited to systems that spend substantial time idle, wake periodically to measure or communicate, and need deterministic control from a compact MCU. The 32 MHz core provides useful performance headroom for protocol handling, control logic, and moderate signal-processing tasks while keeping memory use modest. Typical applications include low-power sensor interfaces, industrial monitoring, portable accessories, connected equipment, compact control panels, and embedded consumer devices. The integrated ADC and DAC can simplify analog signal acquisition and output without requiring a separate converter when the application’s accuracy and sampling requirements are appropriate. For designs needing more program memory, the related EFM32TG825F32-BGA48 provides 32 KB Flash and 4 KB RAM, but it is not an identical drop-in replacement without firmware and resource review. When designing around this MCU, verify the exact BGA pinout, exposed-pad requirements, decoupling, clock configuration, and supported operating range against the manufacturer datasheet. Supply-voltage and temperature limits were not available in the supplied data and are therefore not inferred. This page consolidates verified specifications, source links, application guidance, and replacement limitations without inventing unavailable electrical details.

RFQ צור קשר
EFM32TG825F8-BGA48T - 32MHz ARM MCU | Silicon Labs
EFM32TG825F8-BGA48T

EFM32TG825F8-BGA48T - 32MHz ARM MCU | Silicon Labs

Silicon Labs EFM32TG825F8-BGA48T is a 32-bit ARM Cortex-M3 microcontroller rated for operation up to 32 MHz, with 8 KB of Flash memory and 2 KB of RAM in a 48-BGA (4x4 mm) package. It provides 37 digital I/O pins, two 16-bit timers, AES hardware, three operational amplifiers, and support for an 8x11 LCD. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The EFM32TG825F8-BGA48T belongs to the Tiny Gecko family of 32-bit microcontrollers, combining the ARM Cortex-M3 architecture with energy-saving modes and fast wake-up behavior. This hierarchy places it above the Cortex-M3 core and within the broader embedded MCU and semiconductor categories. The device operates from 1.98 V to 3.8 V and supports an industrial temperature range of -40°C to 85°C. Its operating frequency of 32 MHz provides useful processing performance for embedded control tasks, while the integrated AES accelerator, three operational amplifiers, LCD capability, and low-power architecture reduce the need for external discrete components. The 8 KB Flash configuration suits compact firmware and code-constrained embedded nodes. Silicon Labs positions this MCU around energy-efficient operation, autonomous sensor monitoring in Deep Sleep Mode, capacitive sensing, and rapid wake-up from energy-saving states. Two 16-bit timers support periodic timing, motor-control-related timing, or general event counting. The Serial Wire Debug interface and pre-programmed UART bootloader support development, diagnostics, and field configuration without requiring a separate programming interface in the target application. Typical uses include compact sensor nodes, capacitive buttons, low-power industrial monitors, small LCD instruments, wearable accessories, and embedded control modules. Its 37 I/O pins provide access to sensors and actuators, while the operational amplifiers can condition analog inputs close to the MCU. Designers should still verify each peripheral pin assignment against the device's pin multiplexing and board-level power requirements before finalizing a PCB. The principal design trade-off is its 8 KB Flash limit. It works well for compact, event-driven firmware but may require careful code organization when the application includes extensive libraries, a bootloader, or complex communications stacks. The 3.8 V maximum supply also means the device is intended for low-voltage systems rather than direct connection to higher-voltage industrial rails. This product record combines the manufacturer device information with package, memory, interface, and low-power design guidance. It also identifies same-family hardware alternatives, practical selection criteria, and engineering considerations that help teams determine whether this 48-BGA MCU fits their PCB and firmware requirements.

RFQ צור קשר
EFM32TG825F8-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG825F8-D-BGA48

EFM32TG825F8-D-BGA48 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG825F8-D-BGA48 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory, 2 KB of RAM, and a 48-BGA (4 x 4 mm) package. Its 1.98 V to 3.8 V operating range makes it suitable for compact, low-energy embedded systems requiring efficient code execution and rapid wake-up behavior. An ARM Cortex-M3 microcontroller, or MCU, combines a processor core, memory, peripherals, and I/O in one integrated circuit. Within the semiconductor hierarchy, the EFM32TG825F8-D-BGA48 belongs to the 32-bit microcontroller family and uses the low-power Tiny Gecko platform. Its autonomous peripherals and energy-saving modes are intended to reduce the amount of CPU activity required for routine sensing, communications, and control tasks. The device operates at up to 32 MHz and includes 8 KB of Flash, 2 KB of RAM, 37 digital I/O pins, two 16-bit timers, LCD support, and AES capability. According to the manufacturer EFM32TG data sheet, the family consumes as little as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. These characteristics support duty-cycled products in which the controller sleeps between infrequent events. The Tiny Gecko architecture combines an ARM Cortex-M3 processor with energy-management peripherals and high analog integration. Its wake-up interrupt controller can handle interrupt requests while the CPU is asleep, reducing the need for continuous polling. The 37 available digital I/O pins also provide substantial connection flexibility for sensors, displays, user interfaces, and external interface converters within the constraints of a 4 x 4 mm BGA footprint. Typical applications include energy-harvesting sensor nodes, compact industrial monitors, wearable accessories, connected home devices, low-power metering equipment, and portable products with small displays. The 8 KB Flash capacity favors control-oriented firmware with limited code storage, while the LCD and AES features support display-driven and security-conscious designs. A higher-memory family member is preferable when firmware, libraries, or update buffers require more space. Board design should preserve the separation and decoupling of AVDD_x, VDD_DREG, and IOVDD_x as described in the EFM32TG data sheet. Place supporting capacitors close to their assigned supply pins, keep sensitive analog and communication routes away from fast digital switching nodes, and follow the manufacturer hardware-design guidance before committing a new 48-BGA layout. This page organizes the EFM32TG825F8-D-BGA48's memory, power, package, and application characteristics into an engineering-focused selection guide. It also distinguishes same-package family alternatives by their verified differences, helping designers identify when a higher-Flash variant is preferable and when the 8 KB configuration is sufficient for the intended firmware workload.

RFQ צור קשר
EFM32TG840F16-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG840F16-QFN64

EFM32TG840F16-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG840F16-QFN64 is an ARM Cortex-M3 32-bit microcontroller (MCU) with a maximum operating speed of 32 MHz, 16 kB of Flash memory, 4 kB of RAM, and 56 digital I/O pins in a 64-QFN 9x9 mm package. It belongs to the Tiny Gecko family of low-power embedded processors. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The ARM Cortex-M3 provides the instruction set and processing foundation, while Flash stores the firmware and RAM supports stack operations, data handling, and peripheral activity. The Tiny Gecko family adds energy-saving modes and fast wake-up behavior for systems that spend substantial time idle. The EFM32TG840F16-QFN64 operates at speeds up to 32 MHz and provides 16 kB of Flash, 4 kB of RAM, and 56 digital I/O pins. Two 16-bit timers support periodic timing, event counting, and basic motor or control functions. Its low-power architecture makes it suitable for battery-operated equipment, connected sensors, compact industrial controls, and other applications where average energy consumption matters as much as processing capability. The 64-QFN package supports dense PCB layouts while exposing 56 digital I/O pins for external interfaces. Its peripheral set and energy-management features allow a design to remain in a low-power state during idle periods and resume operation quickly when work is required. This combination is useful in portable measurement, industrial monitoring, and low-power embedded control systems. Typical uses include sensor nodes, small environmental monitors, industrial condition-monitoring devices, battery-powered accessories, and embedded control modules. Designers should allocate memory carefully for firmware, stack depth, and buffered data, and should preserve the recommended decoupling and exposed-pad layout shown in the manufacturer hardware design guidance. The most important design consideration is balancing performance against duty cycle. Running the Cortex-M3 core at 32 MHz supports responsive computation, but a low-energy application can often spend most of its time in a lower-power mode. Firmware can then use timers, interrupts, and wake-up sources to perform work only when needed. This product overview consolidates the core specifications, package details, practical design guidance, sourcing questions, and verified family alternatives for engineers evaluating the EFM32TG840F16-QFN64. It also distinguishes true same-footprint alternatives from devices that would require a PCB redesign.

RFQ צור קשר