EP3SL70F484I3
EP3SL70F484I3 - Stratix III L FPGA, 67.5K LE, 484-FBGA | Intel
The Intel EP3SL70F484I3 is a high-density, low-power member of the Stratix III L FPGA family fabricated on TSMC's 40 nm process, providing 67,500 logic elements, 2,699,264 bits of embedded memory, and 296 user I/Os in a 484-ball Flip-Chip BGA package. The "L" suffix denotes the logic-optimized variant that trades some DSP and transceiver capability for lower static power versus the Stratix III E family, while the "I3" speed/temperature grade delivers industrial temperature range (-40C to +100C) at a moderate -3 speed bin. The device integrates 2,700 Logic Array Blocks (LABs) and 384 embedded 18x18 multipliers, making it well suited for DSP-heavy signal processing in test equipment, medical imaging, and high-performance wireline backplanes.
The Stratix III L is a SRAM-based FPGA (Field Programmable Gate Array) belonging to the broader category of programmable logic devices (PLD), which also includes CPLDs and one-time-programmable devices. Within the power-management hierarchy of a digital system, the FPGA sits below the DC-DC converters and LDOs that feed its core and I/O rails (typically 0.86 V VCC, 1.1 V VCCPT, 2.5 V/3.3 V I/O) and above the application logic it implements. Compared with ASICs, Stratix III devices trade mask NRE cost for design flexibility, in-system re-programmability, and accelerated time-to-market for low-volume or evolving standards.
Key features of EP3SL70F484I3 include 384 DSP blocks (18x18 multipliers), 12 transceivers at up to 3.75 Gbps (per Stratix III L family specifications), Programmable Power Technology (ppt) for fine-grained static power reduction, and hard memory controllers supporting DDR, DDR2, DDR3, QDRII, and RLDRAM interfaces. The 484-FBGA package uses lead-free SAC405 balls on a 1.0 mm pitch and is rated for an extended industrial operating envelope.
Architecture-wise, the device uses ALMs (Adaptive Logic Modules) of 8 inputs each, organized into LABs of 10 ALMs, with routing fabric driven by Quartus II synthesis. Configuration is via fast passive parallel, fast active serial, or JTAG, with bitstream encryption and AES support available on the family. The die integrates 8 PLLs (4 enhanced PLLs and 4 fast PLLs) and 648 Kbits of distributed memory, which complements the 2,699,264 bits of block RAM (M9K and M144K blocks).
Typical applications include high-speed data acquisition, software-defined radio front-ends, digital video broadcast equipment, multi-channel telecom line cards, and ASIC-prototyping platforms where 67.5K LEs provide sufficient headroom for full-system emulation. The Stratix III L family's low static power also makes it attractive for thermally constrained embedded systems such as radar array processors and industrial machine-vision pipelines.
When designing with the EP3SL70F484I3, plan for a multi-rail power tree (0.86 V core via dedicated DC-DC, plus 2.5/3.3 V I/O via an LDO) and place at least eight decoupling capacitors around the BGA perimeter per Quartus II pin connection guidelines. Use Altera's PowerPlay early power estimator before place-and-route to confirm thermal envelope, and consider de-rating I/O toggle rates when fanning out LVDS pairs above 625 Mbps.
This page synthesizes Stratix III L family specifications, Octopart distributor pricing, same-brand speed/package drop-in alternatives, and practical Quartus II design notes that complement the official device handbook.
RFQ
צור קשר