EPF10K50VBI356-4
EPF10K50VBI356-4 - 50K Gates Flex 10K FPGA, 356-BGA | Intel / Altera
The Intel / Altera (formerly Altera) EPF10K50VBI356-4 is a member of the FLEX 10K family of SRAM-based Field Programmable Gate Arrays (FPGAs), featuring 50,000 typical gates, 2,880 logic cells (LEs), 360 logic array blocks (LABs), and 274 user I/Os housed in a 356-ball LBGA package. The device is fabricated on a 0.42 µm CMOS process and operates from a 3.3 V core supply, with the speed grade '-4' indicating a specific timing closure within the FLEX 10K family.
An FPGA (Field Programmable Gate Array) is a reconfigurable integrated circuit that combines programmable logic blocks, programmable interconnect, and programmable I/O cells on a single die, allowing designers to implement custom digital functions after manufacturing. FPGAs sit hierarchically under programmable logic devices (PLDs) and above application-specific integrated circuits (ASICs) in terms of flexibility versus NRE cost, making them ideal for prototyping, low-volume production, and systems that require post-deployment hardware updates. The FLEX 10K family was Altera's first embedded array family, integrating dedicated Embedded Array Blocks (EABs) for on-chip memory alongside logic, which pioneered the System-on-a-Programmable-Chip (SOPC) concept.
Key features of the EPF10K50VBI356-4 include 20,480 typical usable gates, internal frequency support up to 125 MHz, propagation delay as low as 0.6 ns at the -4 speed grade, 16 embedded array blocks providing configurable memory, in-system programmability via JTAG, and a commercial operating temperature range of 0 °C to 70 °C. The device supports multiple I/O standards including LVTTL, LVCMOS, and PCI, configurable per pin through the Altera MAX+PLUS II or Quartus design tools. The 356-pin LBGA package provides high pin density suitable for designs requiring the full 274 I/O count plus dedicated clock, configuration, and JTAG pins.
Technically, the FLEX 10K architecture combines a symmetric logic array with continuous routing resources and dedicated embedded memory blocks. Each LAB contains 8 logic elements with a local interconnect, while EABs provide RAM/ROM blocks up to 2,048 bits each. Configuration is volatile (SRAM-based), requiring an external configuration device such as the EPC2 or EPC8 on power-up. The '-4' speed grade is among the slower bin within the family, trading timing margin for power and yield, which makes this particular MPN suitable for cost-sensitive industrial and communication designs that do not require the highest possible clock rate.
Typical applications include telecommunications line cards, industrial control and factory automation glue logic, legacy computing interface bridging, prototyping for ASIC replacement, test and measurement instrumentation, and military/aerospace systems where the FLEX 10K family has long-tail lifecycle support. The large 274-I/O count and 50K-gate capacity make this device well suited for bus interface aggregation, multi-protocol bridge ICs, and digital signal processing front-end pre-processing.
When designing with this part, ensure a compatible configuration memory is selected (EPC2, EPC8, or compatible) and that JTAG chain integrity is verified before production. The 356-ball LBGA package requires careful PCB layout with controlled-impedance traces and a multi-layer stack-up; ball pitch and via-in-pad design rules must be followed. For new designs, consider migrating to Cyclone or MAX 10 families for lower power and longer lifecycle, but for maintenance of installed bases the FLEX 10K remains in service across many legacy systems.
This page synthesizes distributor pricing, drop-in same-package alternatives from the FLEX 10K family, and practical design notes not found in the original datasheet alone, making it a higher-value reference than distributor product listings for engineers maintaining or replicating legacy FLEX 10K designs.
RFQ
צור קשר