מעגלי ממשק
תת-קטגוריות
מוצרים (2,600+)
MAX3490ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver
The Maxim Integrated MAX3490ESA+ is a 3.3V low-power RS-485/RS-422 transceiver with one driver and one receiver, designed for data rates up to 10Mbps and housed in an 8-SOIC package. According to the verified product data, it is slew-rate limited and supports true RS-485 and RS-422 communication. The low 3.3V supply makes it suitable for industrial control, instrumentation, communications, and embedded systems where a compact differential interface is required. An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into differential signals for reliable communication over wired networks. In this product category, the transmitter drives a differential bus, while the receiver converts the differential bus voltage back into a logic-level signal. RS-422 commonly supports point-to-point communication, while RS-485 supports multipoint bus arrangements. The MAX3490ESA+ combines these functions in one package, reducing the number of external interface components. The verified listing identifies the MAX3490 family as 3.3V, low-power transceivers for RS-485 and RS-422 communication. The MAX3490 device is listed by Analog Devices as a 3.3V-powered, 10Mbps, slew-rate-limited, true RS-485/RS-422 transceiver. The + suffix denotes the lead-free ordering configuration commonly shown by distributors, while the exact package and suffix conventions should be confirmed against the manufacturer ordering guide before production release. Slew-rate limiting helps control the transition speed of the driver, reducing electromagnetic interference and cable reflections associated with faster edges. This is particularly useful when the transceiver drives longer cables or imperfectly terminated buses. The 10Mbps capability supports high-speed point-to-point links, but cable length, topology, termination, grounding, and signal integrity must be evaluated as a complete system rather than treated as an isolated IC specification. Typical applications include industrial RS-485 links, building and factory automation, data acquisition equipment, motor-control systems, security equipment, and embedded communications modules. The 3.3V supply is convenient for systems using 3.3V microcontrollers, DSPs, FPGAs, or other digital controllers. Designers should verify voltage levels, driver and receiver enable timing, bus termination, protection requirements, and operating-temperature limits against the manufacturer datasheet before release. The primary design consideration is ensuring the transceiver operates within the electrical limits of the intended bus. Differential routing should use controlled impedance where practical, the ground reference should be maintained, and unused inputs should not be left floating. This page combines the verified manufacturer and distributor information with practical application guidance, packaging information, and engineering selection criteria for evaluating the MAX3490ESA+.
MAX3490ESA+T - 10Mbps Full-Duplex RS-485/422 | Analog Devices
The Analog Devices MAX3490ESA+T is a 3.3V-powered, low-power RS-485/RS-422 transceiver with one driver and one receiver in an 8-pin SOIC package. It supports data rates up to 10Mbps, operates from 3V to 3.6V, and is designed for full-duplex industrial communications. The tape-and-reel ordering code identifies the lead-free MAX3490ESA variant supplied on carrier tape. An RS-485/RS-422 transceiver is an interface IC that converts between single-ended logic-level signals and differential bus signals. Differential signaling reduces susceptibility to common-mode noise and allows reliable data transfer over longer cables. In the broader hierarchy, the MAX3490 belongs to the RS-485/RS-422 transceiver family within interface ICs and wired-communication semiconductors. Key features include a 10Mbps maximum data rate, 3V to 3.6V supply operation, full-duplex communication, and an integrated driver and receiver. The manufacturer describes the MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 as 3.3V low-power transceivers for RS-485 and RS-422 communication. These devices support industrial-control, instrumentation, data-acquisition, and factory-automation links where robust differential signaling is required. The MAX3490 provides separate transmit and receive paths for full-duplex operation, allowing the transmitter and receiver to remain active simultaneously. Its 8-SOIC surface-mount package supports compact PCB layouts, while the 3.3V supply simplifies interfacing with modern microcontrollers, field-programmable gate arrays, sensors, and industrial controllers. The exact receiver enable, driver enable, and bus-failover behavior should be confirmed against the manufacturer datasheet for the specific ordering variant before schematic sign-off. Typical applications include full-duplex RS-485 links between industrial controllers and remote I/O modules, point-to-point RS-422 interconnects in test equipment, factory-floor sensor networks, and embedded control systems. Compared with half-duplex transceivers that multiplex the driver and receiver onto the same bus pins, a full-duplex implementation can simplify timing and remove the need for software-managed bus turnaround. Designers should account for bus termination, fail-safe biasing, cable length, and grounding when using the MAX3490ESA+T. Differential buses normally require termination resistors at both ends of the cable, while bias resistors may be required to keep the bus in a defined state when no driver is active. Decoupling capacitors should be placed close to the supply and ground pins, and unused inputs should not be left floating. This page consolidates manufacturer product information, distributor pricing references, verified substitute candidates, pin-level guidance, and practical RS-485 design notes into one engineering-oriented resource. It also identifies which same-package alternatives are documented as pin-compatible replacements and where additional manufacturer verification is required.
MAX396EQI - 16:1 Precision CMOS Analog Multiplexer | Maxim
The Maxim Integrated (Analog Devices) MAX396EQI is a precision 16-channel/dual 8-channel low-voltage CMOS analog multiplexer housed in a 28-pin PLCC (11.51 x 11.51 mm) package, specified over the industrial -40C to +85C temperature range. The device is built on Maxim's low-voltage CMOS process and integrates a single 16:1 mux (or two 8:1 muxes in parallel mode) with parallel address logic, making it a classic Maxim precision signal-routing building block. It is the original E-series (extended-industrial) part of the MAX396 family. What is an analog multiplexer? An analog multiplexer (mux) is a switch network that routes one of N analog input signals to a single output line under digital control. Muxes are the foundational building block of analog signal chains, sitting between sensors, test points, instrumentation amplifiers, and an ADC. The MAX396EQI specifically belongs to the CMOS analog mux family, characterized by low on-resistance, low leakage, and rail-to-rail analog signal handling - critical for instrumentation and data-acquisition front-ends. Key specifications include 100 ohm maximum on-resistance (matched within 6 ohm between channels), on-resistance flatness of 10 ohm maximum across the specified analog signal range, transition time under 250 ns, and input off-leakage current below 1 nA at +85C. These characteristics make the MAX396EQI well suited for low-distortion multiplexing of precision signals without the channel-mismatch errors that plague generic muxes. The device operates from a single +2.7V to +16V supply (or split +/- supplies), draws a low quiescent current, and provides ESD-rated inputs with TTL/CMOS-compatible address logic. Architecturally it uses charge-pump driven CMOS analog switches that keep the on-resistance flat over the analog signal range - a hallmark of Maxim's precision muxes versus competing JFET or DMOS parts. Typical applications include data-acquisition front-ends, automated test equipment (ATE) signal routing, audio signal routing, instrumentation multiplexing, and process-control analog input boards. Engineers typically pair the MAX396EQI with a precision op-amp buffer and a successive-approximation ADC to build a 16-channel low-noise analog front-end. When designing with the MAX396EQI, observe the absolute maximum analog signal range of V+ and V- rails; exceeding these destroys the switches. Use a low-ESR bypass capacitor of 0.1 uF close to the supply pin and reserve a small RC network on the address lines to suppress digital switching transients that couple into the analog path. Compared with modern pin-compatible successors, the MAX396EQI delivers superior channel matching but consumes more supply current and occupies a larger PLCC footprint than today's TSSOP muxes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not typically consolidated on the manufacturer datasheet, helping engineers select, source, and implement the MAX396EQI more confidently.
MAX4850ETE+ - Dual SPDT Over-Rail Analog Switch | Analog Devices
The Analog Devices MAX4850ETE+ is a dual single-pole double-throw analog switch with over-rail signal handling, supplied in a 16-pin TQFN package measuring 3 mm by 3 mm. The verified distributor data identifies the device as a two-channel SPDT switch intended for audio and USB signal-routing applications. Its defining architecture is a pair of independently controlled analog switches that can route a common terminal to one of two switched terminals. An analog switch is a solid-state semiconductor device used to connect or disconnect signal paths under digital control. The SPDT, or single-pole double-throw, topology provides one common terminal and two selectable throws. This makes an SPDT switch useful for selecting between two sources, sharing one output with two paths, or implementing basic routing and isolation functions. MAX4850 belongs to the broader category of interface ICs and analog switch ICs within semiconductor signal-control devices. The MAX4850ETE+ combines two SPDT channels in one compact 16-TQFN package. Its over-rail signal-handling feature is specifically identified in the verified product descriptions. This feature is important in circuits where the switched voltage may extend beyond the device's normal supply-rail limits, although the exact permitted input and supply ranges were not supplied by the verified data and must be confirmed in the manufacturer datasheet before design release. The MAX4850ETE+ is applicable to audio routing, USB signal switching, and other compact interface systems in which two independent selection functions are useful. Its 3 mm by 3 mm TQFN package reduces board area compared with larger switch packages, while exposed-pad construction can improve heat transfer when the device dissipates appreciable power. Exact contact resistance, bandwidth, leakage, channel capacitance, logic thresholds, supply range, and timing values remain unavailable in the supplied records and therefore are not asserted here. Use the MAX4850ETE+ when a design requires dual SPDT switching in the compact 16-TQFN footprint and when its verified over-rail handling characteristics satisfy the signal levels involved. Designers should confirm the complete electrical limits, control-pin truth table, recommended input circuit, and exposed-pad layout against the official datasheet. The verified distributor records support availability inquiries and quote-based purchasing, but they do not provide a numerical price table or confirmed stock quantity. This page distinguishes directly verified facts from missing technical data, connects the device with appropriate audio, USB, routing, and signal-isolation use cases, and explains what engineers must verify before layout. It also records the absence of verified pin-to-pin substitute MPNs instead of presenting speculative cross-brand parts as drop-in replacements.
MAX4853ETE - Quad SPST Over-Rail Switch | Analog Devices
Analog Devices MAX4853ETE is a quad, single-pole single-throw analog switch with over-rail signal handling, supplied in a 16-pin TQFN exposed-pad package. The verified manufacturer-family description identifies four SPST switches, while the MAX4853 family name and MAX4851/MAX4851H/MAX4853 grouping provide the core functional context. Exact electrical ratings, switch resistance, leakage current, bandwidth, and supply limits are not present in the supplied web extracts and therefore must be confirmed in the manufacturer datasheet before design release. An analog switch is an integrated semiconductor device that connects or discloses signal paths under digital control. In the product hierarchy, MAX4853ETE is an analog switch, also described as a multiplexer or switch IC, and belongs to the broader interface-IC and signal-routing categories. Unlike a mechanical relay, it changes signal paths electronically without moving physical contacts; unlike a simple transistor switch, it can support controlled, bidirectional analog routing and over-rail signal-handling functions. The primary feature of the MAX4853ETE is its quad SPST organization. Four independently controlled switches can route four separate analog signals, reducing the component count in test, measurement, communication, and signal-routing systems. Its over-rail signal-handling characteristic allows the switch to be evaluated for applications where the controlled signal may extend beyond the nominal supply rail. The TQFN-16 exposed-pad package supports compact surface-mount layouts while providing a thermal path through the exposed pad. The MAX4853, MAX4851, and MAX4851H appear together in the verified family description, but the extracts do not provide enough electrical detail to claim that those devices are electrically or pin compatible with MAX4853ETE. In particular, contact configuration, supply topology, control logic, on-resistance, signal range, and absolute maximum ratings must be compared before substitution. The verified search results describe the MAX4853 family as having 3.5/7 dual-supply, quad-SPST over-rail functionality, but the corrupted characters in that snippet prevent safe extraction of further conditions. Typical uses for this device include analog test-point selection, signal-routing in instrumentation, multiplexing between external circuits and a shared analog-processing chain, and controlled connectivity in communications or industrial electronics. A practical design would use the control pins from a microcontroller or logic device, connect the exposed pad to the PCB ground or thermal plane as specified by the datasheet, and provide clean supply bypassing close to the package. Logic levels and timing must be checked against the exact operating supply. The primary design consideration is signal integrity. Because the supplied extracts do not provide verified bandwidth, charge injection, off isolation, on resistance, or capacitance values, engineers should not size termination or filtering from assumptions. Consult the MAX4853 manufacturer datasheet for the complete electrical characteristics, recommended operating conditions, truth tables, and application information. Also verify the exposed-pad connection and reflow profile for the specific TQFN-16-EP package. This product page separates what is confirmed by the supplied search evidence from parameters that remain unverified. It combines the confirmed quad-SPST function, over-rail feature, and TQFN-16-EP package with explicit data gaps, avoiding invented pricing, ratings, pin assignments, or replacement claims. That distinction is particularly important for analog switches, where apparently similar parts can differ in signal range, control thresholds, and channel behavior.
MAX485CPA+ - Low-Power RS-485/RS-422 Transceiver | Analog Devices
The Analog Devices MAX485CPA+ is a low-power, slew-rate-limited RS-485/RS-422 interface transceiver with one driver and one receiver in an 8-pin PDIP package. The verified product data identifies it as a half-duplex transceiver designed for RS-485 and RS-422 communication, supporting low-power differential bus communication where controlled edge rates help reduce unwanted reflections and electromagnetic interference. The MAX485CPA+ is suitable for industrial equipment, instrumentation, data acquisition, building controls, and other systems that require robust differential signaling over longer cable runs. An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into differential bus signals and receives differential signals back from the bus. In this product family, the transceiver combines a transmitter and receiver while supporting half-duplex communication, meaning the shared bus can transmit or receive according to the system design. The MAX485CPA+ belongs to the broader interface-IC and RS-485 transceiver hierarchy, linking digital logic equipment to a physical differential communication network. Key verified features include a low-power communication architecture, slew-rate-limited signaling, one driver, one receiver, and compatibility with both RS-485 and RS-422 applications. The verified distributor listings identify the package as an 8-pin PDIP and categorize the part as a half-duplex transceiver. The eight-pin package supports through-hole assembly and provides the standard transceiver connections needed for a board-level industrial interface. The official Analog Devices product page describes the MAX485 family as low-power transceivers for RS-485 and RS-422 communication. The transceiver architecture is important in systems where a controller UART connects to a field bus. The driver presents the outgoing data as a differential signal, while the receiver converts the differential bus state into a logic-level signal for the host. Slew-rate limiting reduces the high-frequency content of transitions, helping control signal integrity on terminated or moderately loaded buses. Designers must still select the correct cable, termination, grounding, and biasing strategy for the installed network. Typical applications include industrial automation links, remote sensor networks, security equipment, test and measurement systems, building automation controllers, and communication links between embedded processors and external transceivers. A microcontroller or programmable controller can use the MAX485CPA+ to communicate over a longer differential bus instead of relying on a single-ended signal. The design must account for bus direction control, driver enable timing, receiver enable timing, and the electrical limits of the connected network. For PCB design, place the transceiver close to the connector and route the differential pair with consistent geometry, minimal stubs, and appropriate grounding. Use termination only where required by the bus topology, and verify the cable length, baud rate, node count, and common-mode environment. This page combines verified product descriptions, distributor sourcing information, cross-reference results, and practical interface guidance for engineers evaluating the MAX485CPA+.
MAX485CUA+ - 5V RS-485/RS-422 Transceiver, 2.5Mbps | ADI/Maxim
The Analog Devices (formerly Maxim Integrated) MAX485CUA+ is a low-power transceiver for RS-485 and RS-422 communication, integrating one driver and one receiver in an 8-pin uMAX/uSOP package. It operates from a single 4.75V to 5.25V supply, supports data rates up to 2.5Mbps with no slew-rate limiting, and delivers typical supply current of 300 uA under quiescent or full-duplex load conditions. An RS-485/RS-422 transceiver is a bus-interface IC that converts between single-ended UART/CMOS logic on the controller side and the differential voltage signaling required for robust long-distance, multi-drop communication over twisted-pair cable. Transceivers such as the MAX485CUA+ sit inside the broader Interface IC family and provide the physical-layer (PHY) bridge for industrial fieldbus networks including Modbus, Profibus DP, DMX512, and BACnet, where common-mode noise immunity and cable lengths up to 1200 m are required. Key features of the MAX485CUA+ include 2.5Mbps maximum data rate, 1/8 unit-load (up to 256 transceivers on a bus), thermal-shutdown protection, short-circuit current limiting on the driver outputs, a low-current shutdown mode (on the MAX481/MAX483/MAX487 variants, not the MAX485 itself), true fail-safe receiver inputs that guarantee a logic-high output when the differential input is open or shorted, and an ESD rating of greater than 15 kV HBM on the bus pins per the MAX485 datasheet family. Architecturally, the MAX485CUA+ uses a differential line driver with slew-rate-limited edges on slower speed grades and an un-limited edge rate here for maximum 2.5Mbps throughput, paired with a differential receiver with internal hysteresis for noise rejection. The wide 4.75V to 5.25V supply range is compatible with 5V TTL logic rails; a 3.3V variant (MAX3485) and isolated versions (MAX1480) exist in the same family for different system-level needs. Typical applications include industrial multi-drop RS-485 networks, building-automation HVAC controllers, point-of-sale terminals, packet-based utility metering, and any embedded system that requires half-duplex differential communication over long cables in electrically noisy environments. When designing with the MAX485CUA+, place a 100 ohm termination resistor at each end of the bus and use a low-ESR 100 nF decoupling capacitor as close to VCC as possible. Select 100 ohm twisted-pair cable (EIA-485 characteristic impedance) and avoid star topologies; daisy-chain is required to prevent reflections. This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB/layout design notes derived from the MAX485 datasheet family and reference designs not reproduced on distributor product pages.
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
The Maxim Integrated MAX485ECPA+ is a single-driver, single-receiver half-duplex RS-485/RS-422 transceiver with low-power operation, slew-rate-limited (limited EMI) driver outputs and ±15 kV ESD protection on every driver output and receiver input, packaged in an 8-pin PDIP (through-hole) DIP-8 package. Key headline parameters are a 5 V single supply (4.5 V to 5.5 V), a 1 Mbps data rate from the limited-slew-rate driver, and ±15 kV ESD ruggedization; the device is a 1/1 transceiver in an 8-pin PDIP-8 package. An RS-485 transceiver is a differential line-interface IC inside the broader hierarchy of interface ICs -> differential line driver/receiver -> communications transceiver -> semiconductor. It converts a logic-level serial signal (DI) into a balanced differential pair on the A and B bus wires, and converts a differential bus voltage back into a logic-level receiver output (RO). Unlike a single-ended RS-232 transceiver, an RS-485 driver drives a balanced, floating differential pair, so common-mode noise is rejected and cables up to about 1200 metres at low data rates can be supported. Key features of the MAX485ECPA+ include a limited-slew-rate driver that minimizes EMI and ground bounce on the bus, allowing operation without external slew-control resistors; short-circuit current limiting on the driver outputs; thermal shutdown for excessive power dissipation; and a low quiescent current design that supports low-power node designs. A shutdown (sleep) input is not present on this device, so the node stays enabled while powered, which simplifies bus management in fixed installations. Technically, the MAX485ECPA+ is a single-channel half-duplink device: DE (driver enable) and /RE (receiver enable) are separate pins, so a design can transmit, receive, or disable the bus independently for fail-safe biasing. The driver is designed for a balanced network so that no additional termination or bias resistors are required on the driver side, although the bus must still be properly terminated at the two physical ends and biased at exactly one point if the transceiver's receiver thresholds require it. Typical applications include industrial RS-485 multidrop buses, building automation and HVAC controllers, energy meters, inverters and solar trackers, security and access-control panels, and instrumentation links to remote sensors. The 8-pin PDIP package is preferred for leaded industrial equipment where through-hole assembly, hand soldering, and field replacement are required. The main design consideration is ESD and surge coupling: although the internal protection is rated at ±15 kV on the bus pins, the ESD paths are only effective if the bus entry point is close to the transceiver, so a multi-layer board with a solid ground plane and short A/B traces is strongly preferred over a long unprotected stub. This page consolidates distributor pricing, verified package and interface details, pin-compatible drop-in alternatives in the same PDIP-8 footprint, and practical RS-485 layout and termination guidance that are not collated on a single manufacturer page.
MAX485ECSA+ - 2.5 Mbps RS-485 Transceiver | Analog Devices
The Analog Devices MAX485ECSA+ is a low-power RS-485 and RS-422 half-duplex line transceiver packaged in an 8-pin SOIC, operating at up to 2.5 Mbps with 15 kV ESD protection on driver outputs and receiver inputs. It combines one driver and one receiver in a package designed for noisy industrial communication links. According to the manufacturer data summarized by distributor listings, the MAX485E family is intended for low-power RS-485 and RS-422 communications in harsh environments. A half-duplex transceiver is a network interface that transmits and receives data on the same differential bus pair but cannot do both simultaneously. The MAX485ECSA+ supports a multidifferential bus architecture using differential data lines for noise immunity, while its driver and receiver enable inputs allow the host to control bus direction. This device sits within the hierarchy of line transceiver, physical-layer interface IC, communication interface, and semiconductor. Principal features include a maximum data rate of 2.5 Mbps, 15 kV ESD protection, slew-rate-limited driver outputs, and low-power operation. The E version differs from the standard MAX485C family by emphasizing electrostatic-discharge protection for industrial environments. The narrow SOIC-8 package also supports compact PCB layouts in distributed control, building automation, instrumentation, and industrial data-acquisition systems. The transceiver uses separate active-low receiver-enable and driver-enable control inputs, permitting a connected MCU to assert the driver for transmission and release it during reception. Differential signaling improves common-mode noise rejection on long cables, but system performance still depends on correct bus termination, controlled cable characteristics, protective grounding, and an appropriate transceiver slew rate. The receiver converts the A and B differential voltage into a single-ended logic signal at the R pin. Typical uses include industrial supervisory control, factory automation, building automation, security equipment, remote instrumentation, and RS-485 links between microcontrollers or programmable logic controllers. The MAX485ECSA+ is particularly appropriate when ESD exposure is more important than minimizing package size. For low-data-rate meter buses, lower-power or higher-node-count variants may be preferable, so protocol and bus-topology requirements should be confirmed before substitution. The critical design consideration is bus configuration. Place termination resistors of 120 ohm at both physical ends of a standard RS-485 trunk, not at every node, and avoid star topologies with heavy loading. Use a common reference ground, controlled cable routing, and suitable surge protection for cables leaving an enclosure. The MAX485ECSA+ is a line transceiver, not a full RS-232 interface, so the host must use differential-bus-compatible logic and a suitable isolation strategy where required. This page consolidates verified distributor availability, an identified pin-compatible cross-reference, package-level comparison data, and application-specific engineering guidance. It distinguishes the MAX485ECSA+ from related MAX485 variants based on verified package, data-rate, ESD-protection, and interface information rather than treating all similarly named transceivers as interchangeable.
MAX485EEPA+ - 15kV ESD RS-485 Transceiver | Maxim Integrated
The Maxim Integrated MAX485EEPA+ is a low-power, slew-rate-limited half-duplex RS-485 and RS-422 transceiver with one driver and one receiver, 15 kV ESD protection, and a 4.75 V to 5.25 V supply in an 8-pin PDIP package. It is designed for bidirectional industrial and instrumentation data links where reduced transition rates, overload protection, and reliable differential signaling are important. An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals to and from differential bus voltages. It belongs to the transceiver hierarchy: interface IC -> RS-485/RS-422 transceiver -> differential communication interface. The MAX485EEPA+ combines a transmitter, receiver, driver-enable control, receiver-enable control, and bus pins in one device, reducing the component count required for a bidirectional serial-data link. The MAX485EEPA+ provides one transmit channel and one receive channel. Its 15 kV ESD protection is the principal rugged-environment feature identified in the supplied manufacturer-related data. Slew-rate limiting helps control edge speed and reduce reflected-signal and electromagnetic-interference problems on longer cables. The low-power operating mode also makes the device suitable for equipment where the transceiver remains connected to a bus even when communication is inactive. Communication is established by connecting the differential A and B pins to the twisted-pair bus. The DE input enables the driver, while the active-low RE input enables the receiver. These controls allow the two halves of the transceiver to be disabled independently, supporting point-to-point links, multidrop RS-485 networks, and panel-mounted equipment where a local test loop can be useful. Logic-side signals connect to DI for transmit data and RO for received data. Typical uses include industrial sensor gateways, programmable logic controller interfaces, building-automation equipment, industrial test instruments, and RS-422 links between equipment cabinets. The 5 V supply matches systems that already operate from regulated 5 V rails. Because the device is half-duplex, software or hardware must control bus direction and avoid transmission conflicts when several nodes share the same pair. For reliable operation, route the A and B differential pair as a tightly coupled twisted pair, minimize stub branches, and place termination at physical ends of the bus rather than at every node. Provide local supply decoupling and verify that transceiver-enable timing prevents two drivers from driving the bus simultaneously. Unverified transceiver thresholds, current limits, and exact timing values must be confirmed in the manufacturer datasheet before final release. This product page combines verified distributor descriptions, cross-reference evidence, package and pinout information, replacement guidance, and practical bus-layout considerations. It also distinguishes documented drop-in family options from alternatives that would require a different PCB footprint.
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
The Analog Devices (formerly Maxim Integrated) MAX485EESA+ is a 5V, half-duplex, slew-rate-limited RS-485/RS-422 transceiver in an 8-pin SOIC (SO-8) package, featuring ±15kV ESD protection on the bus pins for harsh industrial environments. It integrates one driver and one receiver, supports data rates up to 2.5 Mbps, and operates from a single 5V supply drawing 1 mA (typical) quiescent current while allowing up to 32 transceivers on the bus. The slew-rate-limited driver minimizes EMI and reflections on improperly terminated cables, enabling error-free transmission over twisted-pair media up to 1200 m. The MAX485EESA+ includes ±15kV HBM ESD protection on the driver output and receiver input pins, making it suitable for hot-swap and field-bus installations where cable discharge events are common. An RS-485/RS-422 transceiver is a differential line driver/receiver IC that converts a single-ended TTL/CMOS logic signal into a balanced differential pair suitable for transmission over twisted-pair cabling. RS-485 supports multi-drop (up to 32 unit loads, 256 with newer parts) half-duplex communication across long distances; RS-422 is a point-to-point full-duplex standard. The MAX485EESA+ belongs to the half-duplex RS-485 transceiver class within the larger interface-IC category of wired communication semiconductors. Key features include ±15kV HBM ESD protection, slew-rate-limited driver for low EMI, 1/2 unit-load input impedance, thermal-shutdown protection, and short-circuit current limiting. The receiver provides fail-safe operation, guaranteeing a logic-high output when the bus inputs are open, shorted, or idle, eliminating the need for external biasing resistors at the ends of the cable. Current limiting and thermal shutdown protect the driver outputs against excessive power dissipation caused by bus contention or output short circuits to ground or supply. Typical applications include industrial field-bus networks (Modbus, Profibus, DMX512), building automation (BACnet, LonWorks), HVAC controls, security systems (access control, alarm panels), and point-of-sale (POS) equipment. The wide operating temperature range (-40 °C to +85 °C for the E grade) and rugged ESD rating make it a drop-in solution for industrial controllers, PLCs, and motor-drive interfaces. When designing with this device, place 100 nF bypass capacitors as close as possible to VCC (pin 8) and provide a 120 Ω termination resistor at each end of the bus when using the highest data rates. Keep the PCB stub length to the connector below one-tenth of the driver rise time to minimize reflection-induced jitter. Use twisted-pair cable with 100 Ω characteristic impedance (e.g., Belden 3106A) and avoid running RS-485 traces parallel to noisy switching rails. This page synthesizes distributor pricing, drop-in same-package alternatives, and application design notes that extend beyond the manufacturer datasheet.
MAX485EPA+ - 2.5Mbps RS-485/RS-422 Transceiver | Maxim Integrated
The Analog Devices Inc./Maxim Integrated MAX485EPA+ is a low-power RS-485/RS-422 interface transceiver with one driver and one receiver, a 2.5 Mbps maximum signaling rate, and an 8-pin PDIP package. It is designed for industrial, instrumentation, and distributed-control links that require reliable differential data transmission over longer cable runs. The verified listing identifies the device as a half-duplex RS-422/RS-485 transceiver with a 4.75 V to 5.25 V supply range. An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into differential bus signals and converts received differential signals back into CMOS-compatible logic. RS-422 and RS-485 use differential signaling to improve noise immunity and allow communication across cables in electrically noisy environments. The MAX485EPA+ supports one driver and one receiver, making it suitable for point-to-point, multidrop, and half-duplex bus arrangements when the system includes the required enable control, termination, biasing, and transceiver-direction logic. The MAX485EPA+ is specified as a low-power transceiver with driver short-circuit current limiting and protection. The verified product data states that the output slew rate is not limited and that the device can transmit up to 2.5 Mbps. This speed capability makes it useful for factory automation, industrial control, building automation, and embedded communications where the bus must carry bursts of digital data while maintaining a compact, widely available 8-pin through-hole package. The device is suitable for RS-485 networks connected to microcontrollers, sensors, motor controllers, data converters, and remote I/O modules. The system designer must account for bus topology, cable length, termination resistors, common-mode limits, grounding, and the direction-control interface. The MAX485EPA+ does not by itself provide galvanic isolation; applications requiring isolation between high-energy bus wiring and control electronics should add suitable isolation components and protection devices. Because the MAX485EPA+ uses a PDIP package, it is particularly useful for prototypes, serviceable equipment, and industrial products assembled through-hole rather than high-density automated surface-mount processes. The 8-pin package simplifies inspection and rework. The plus suffix identifies the leaded product ordering code shown in the verified distributor records; package, temperature, and qualification requirements should still be checked against the exact manufacturer ordering information before production release. This page combines verified distributor listings, manufacturer-family information, pricing context, and practical interface design guidance. It is intended to help engineers identify whether the MAX485EPA+ fits an existing RS-485 or RS-422 PCB and to distinguish it from alternatives with different package, speed, supply, or protection characteristics.
MAX485ESA+ - 5V RS-485/RS-422 Transceiver, 2.5Mbps, SOIC-8
The Analog Devices (formerly Maxim Integrated) MAX485ESA+ is a low-power, slew-rate-limited RS-485/RS-422 transceiver housed in an 8-pin SOIC package. The device contains one driver and one receiver, operates from a single 5 V supply, and supports data rates up to 2.5 Mbps with half-duplex communication. It draws between 120 µA and 500 µA of supply current when unloaded or fully loaded with disabled drivers, making it well suited for power-sensitive industrial networks. What is an RS-485/RS-422 transceiver? An RS-485 transceiver (TIA/EIA-485) is a differential line driver/receiver IC that converts a single-ended TTL/CMOS logic signal into a balanced differential signal suitable for transmission over twisted-pair cabling. RS-485 transceivers belong to the broader physical-layer IC family inside Interface ICs, which also includes RS-232, CAN, and I2C transceivers. The half-duplex variant shares one differential pair between driver and receiver, reducing cable cost for bidirectional buses such as Profibus, Modbus RTU, and DMX512. Key features of the MAX485ESA+ include a 1/8 unit-load input impedance (allowing up to 256 transceivers on a single bus), driver short-circuit current limiting, and thermal-shutdown protection that places the driver outputs into a high-impedance state. The receiver includes a fail-safe function that guarantees a logic-high output when the differential input is floating, shorted, or terminated but idle. Industry-standard SOIC-8 pinout and 5 V operation make the part a drop-in upgrade or replacement for legacy Maxim/Intersil RS-485 designs. Internally, the driver uses a slew-rate-limited output stage to reduce EMI and reflections on unterminated cables, while the receiver incorporates hysteresis and an input filter to reject common-mode noise. The common-mode input voltage range extends from -7 V to +12 V relative to ground, supporting long cable runs with significant ground potential differences between nodes. Typical applications include industrial field-bus networks (Modbus, Profibus, BACnet), building automation, HVAC controllers, motor-control command links, point-of-sale terminals, and multidrop RS-485 utility metering. Designers select the MAX485ESA+ when they need a proven, second-source-friendly 5 V half-duplex transceiver with long-term availability. When designing with this part, place 120 Ω termination resistors only at the two physical ends of the bus to avoid loading the drivers. Use a 100 nF decoupling capacitor placed within 5 mm of the VCC pin, and route the A/B differential traces with controlled 100 Ω differential impedance and ground-referenced return paths. This page synthesizes distributor pricing, drop-in compatible alternatives (including the SN75176B and SP485EN-L/TR families), and practical design notes that go beyond the bare datasheet, helping engineers select and source the right transceiver faster.
MAX485ESA+T - 2.5Mbps RS-485/RS-422 Transceiver | ADI
Analog Devices MAX485ESA+T is a low-power half-duplex RS-485/RS-422 interface transceiver with one driver and one receiver, a maximum data rate of 2.5Mbps, and a 4.75V to 5.25V supply range. The device is supplied in an 8-pin SOIC package and is intended for industrial bidirectional serial-data links. An RS-485 transceiver is an interface IC that combines a differential line driver and differential receiver. These transceivers connect a host controller, PLC, sensor, or industrial endpoint to a balanced communication bus. The RS-485 standard hierarchy supports longer, noise-resistant interconnects than single-ended interfaces, while RS-422 compatibility allows the same device family to serve point-to-point links. Driver enable and receiver-enable inputs provide local control over bus direction and reception. The MAX485ESA+T uses a 4.75V to 5.25V supply and supports data rates up to 2.5Mbps. Its driver is short-circuit-current limited and protected, an important feature when a bus fault drives a line into a low-impedance condition. The integrated receiver converts differential bus voltage into a logic-level output, while the driver converts logic-level data into differential output. This combination supports half-duplex operation, in which the same pair of conductors carries transmitted and received data at different times. The 8-pin SOIC package keeps the implementation compact and familiar to industrial-control board designers. Because the MAX485ESA+T does not limit its slew rate, it can transmit at up to 2.5Mbps according to the provided manufacturer and distributor documentation. That speed is useful for factory automation, instrumentation, and embedded control networks, although cable length, termination, topology, and signal integrity become increasingly restrictive as data rate rises. Typical uses include RS-485 fieldbus connections, motor-control diagnostics, industrial sensor gateways, building-control equipment, and communications between a microcontroller and remote peripheral. In a typical circuit, the transceiver sits between a UART-capable controller and a protected, twisted-pair bus. A termination resistor is placed at each end of the bus, while common-mode protection and chassis-grounding practices may be needed in electrically noisy installations. Designers should verify that the selected cable length and topology can support the intended 2.5Mbps rate, connect the receiver and driver enables for the required half-duplex behavior, and maintain compatible logic levels across the system. The 5V supply requirement also requires a 4.75V to 5.25V regulator rather than a 3.3V rail. This page combines the verified manufacturer and distributor information with package-level engineering guidance, practical interface considerations, pricing context, and pin-compatible replacement analysis to support faster component selection and PCB migration.
MAX487ESA+ - Low-Power Slew-Rate-Limited RS-485/RS-422 Transceiver | Analog Devices
The Analog Devices MAX487ESA+ is a low-power, slew-rate-limited RS-485/RS-422 transceiver containing one driver and one receiver in an 8-pin SOIC (NS) package. It operates from a single 5V supply, supports data rates up to 250 kbps, and provides ±15 kV ESD protection on driver output and receiver input pins. The MAX487ESA+ features low quiescent supply current (120 µA to 500 µA) under load and 0.1 µA in shutdown, making it ideal for power-sensitive multi-drop networks. An RS-485 transceiver is a differential line driver/receiver that translates logic-level UART signals to a robust differential signal capable of being transmitted over long cables in electrically noisy environments. RS-485 supports multi-drop configurations of up to 32 transceivers on a single twisted pair, enabling half-duplex or full-duplex communication over distances up to 1200 m. RS-485 transceivers belong to the broader interface IC category within power management and communication ICs, and are standardized under TIA-485 (formerly EIA-485). Key features include slew-rate-limited driver outputs that reduce EMI and reflections on unterminated or improperly terminated cables, true fail-safe receiver inputs that guarantee a known output state when the bus is idle or shorted, and a low-current shutdown mode that places the device in <0.1 µA quiescent for power-saving operation. The MAX487ESA+ carries ±15 kV HBM ESD protection on the bus pins, providing robust tolerance to electrostatic discharge events during handling and field installation. The MAX487ESA+ integrates a complete half-duplex RS-485 link layer with internal cable termination management through slew-rate control rather than discrete termination. Its 5V single-supply operation simplifies power architecture in industrial 24V-rail-derived systems, and its robust differential signaling supports industrial control, building automation, and point-of-sale applications. Typical applications include industrial fieldbus networks (Modbus, Profibus), HVAC building automation systems, motor control encoder feedback, point-of-sale (POS) terminals, security system intercom panels, and remote utility metering. The MAX487ESA+ pinout and protocol match the broader MAX481/MAX483/MAX485/MAX487/MAX1487 family, allowing drop-in upgrades and obsolescence mitigation across existing designs. Design considerations: include a 100 nF decoupling capacitor close to VCC, place a 120 Ω termination resistor across the differential pair only at the cable ends, and ensure the cable shield is grounded at one end only to suppress ground loops. The DE and RE pins control driver/receiver direction; when using half-duplex, tie DE and /RE together with a single GPIO line. This page synthesizes distributor inventory, parametrically matched drop-in alternatives from the MAX48x family and competitive second sources, and practical design notes that go beyond what the manufacturer datasheet alone provides.
MAX6816EUS+T - ±15kV ESD SOT-143-4 Switch Debouncer | Maxim
The Analog Devices / Maxim Integrated MAX6816EUS+T is a single-channel CMOS switch debouncer IC housed in a 4-pin SOT-143-4 surface-mount package, qualified over a 2.7 V to 5.5 V supply range and engineered for clean interfacing of mechanical switches to digital logic. It delivers a clean, debounced logic output from one bouncing mechanical input at 25 µA quiescent current with ±15 kV ESD protection on the switch input. A switch debouncer is a specialized interface IC that filters the mechanical contact bounce of switches, keypads, relays, or other electro-mechanical contacts so a downstream microcontroller or ASIC receives a single, deterministic logic transition. As a subcategory of supervisory / interface ICs, switch debouncers sit between the analog-mechanical input domain and the digital domain; they belong to the broader interface-IC hierarchy (specialized interface -> interface IC -> integrated circuit) and serve the same role as a hardware RC filter plus Schmitt trigger, but in a single chip. Key features of the MAX6816EUS+T include a fixed 40 ms (typical) debounce qualification delay that removes both switch opening and closing bounce, ±15 kV HBM ESD protection on the switch input per IEC 61000-4-2 air-discharge testing, 2.7 V to 5.5 V single-supply operation, low 25 µA quiescent current, and a small SOT-143-4 outline. The output stage is a CMOS push-pull driver capable of sourcing/sinking several milliamps, so it can directly drive most CMOS logic families without an external pull-up resistor. The MAX6816/MAX6817/MAX6818 family is fabricated on a low-power CMOS process with on-chip ESD cells and a precision timer block that sets the debounce interval without external capacitors. Compared to discrete RC + Schmitt debounce networks, the integrated timer is stable across temperature and removes the need for tuning. The MAX6818 (octal, 20-pin) is pin-compatible with the LS573 octal latch (except for the CH pin), giving a migration path for designers scaling from 1 channel to 8 channels. Typical applications of the MAX6816EUS+T include membrane keypad interfaces, pushbutton reset circuits, industrial control panels, automotive body controllers, portable consumer electronics, and appliance front-panel switches. The compact SOT-143-4 footprint makes it suitable where board area is constrained. When designing with this part, place a 0.1 µF decoupling capacitor within 5 mm of the VCC pin and keep the trace from the mechanical switch to the IN pin short to maximize ESD protection effectiveness. The output does not require a pull-up resistor. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.
MAX9675ECQ+ - 110MHz 16x16 Video Crosspoint Switch | Maxim Integrated
The Analog Devices (formerly Maxim Integrated) MAX9675ECQ+ is a nonblocking 16 x 16 video crosspoint switch with buffered inputs and outputs, programmable gain, and a 110 MHz bandwidth. It is housed in a 100-pin TQFP (14x14 mm) package and operates from a single 2.7 V to 5.5 V supply, drawing a low quiescent current suited to multi-channel video routing cards and large switching arrays. A video crosspoint switch is an analog or digital signal-routing IC that allows any of N inputs to be switched to any of M outputs, typically with buffering on both sides so signals can drive long PCB traces or 75 ohm video loads. Crosspoint switches sit at the heart of video routers, production switchers, surveillance multiplexers, and broadcast equipment, replacing mechanical relays and discrete video amplifiers with a single silicon device. Programmable gain lets the designer compensate for cable losses or output-load variations across channels. The MAX9675ECQ+ integrates sixteen buffered inputs and sixteen buffered outputs with a fast SPI/QSPI-compatible 3-wire serial interface for matrix mode and per-channel gain programming. The BiCMOS process supports rail-to-rail video swings and wide bandwidth at low quiescent power, while on-chip clamp and bias circuitry preserves AC-coupled video baselines. All outputs are held in a high-impedance disabled state during power-up to avoid signal contention in multi-device arrays. Typical applications include broadcast video routers, professional video switchers, security and surveillance multiplexers, medical imaging pipelines, automotive infotainment video backbones, and test-and-measurement video generators. The wide supply range (2.7 V to 5.5 V) makes it compatible with both 3.3 V and 5 V logic, while the 110 MHz -3 dB bandwidth easily handles SD-SDI, composite, component, and RGBHV video formats. When designing, AC-couple inputs and outputs with 220 uF electrolytics and 0.1 uF ceramics, keep ground returns short and wide to preserve 110 MHz flatness, and program gain conservatively at +1 (0 dB) for cable-compensated long runs to avoid clipping into 75 ohm loads. This page synthesizes distributor pricing, drop-in alternative MPNs, parametric comparison data, and practical design notes not found in the manufacturer datasheet alone.
MAX98090AEWJ+T Ultra-Low-Power Stereo Audio Codec | ADI
The Analog Devices MAX98090AEWJ+T is an ultra-low-power stereo audio codec with a 24-bit I2S interface, six configurable input pins, and integrated audio signal processing, packaged in a 49-WLP measuring 3.15 mm by 3.15 mm. The device combines microphone, line, headphone, and speaker signal-path functions in a compact package for portable audio equipment. According to the manufacturer product page, its high-performance, low-power design and flexible input scheme make it suitable for portable applications. An audio codec is an integrated signal-processing semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. The MAX98090 belongs to the broader codec hierarchy: audio codec → mixed-signal interface IC → digital and analog signal conversion → portable audio electronics. Its integrated architecture can reduce the number of external components needed for a compact audio subsystem while supporting configurable analog and digital microphone inputs. The MAX98090 provides a 24-bit audio interface and an I2S-oriented digital audio connection, while its six input pins can be configured for analog or digital microphones, differential or single-ended line inputs, or full-scale differential inputs. The manufacturer identifies the MAX98090 as an ultra-low-power stereo audio codec designed for portable systems. Its WLP package provides a small physical footprint, but the package requires careful PCB layout, exposed-pad thermal management, and assembly controls. Typical signal paths include digital microphones feeding an I2S-compatible processor, analog microphone or line sources feeding the codec inputs, and headphone or speaker-related audio functions. The flexible input configuration allows one codec family to address portable recording, communication, and multimedia designs. The exact input sensitivity, sample-rate limits, headphone-output capability, and speaker-output current should be confirmed from the manufacturer datasheet for the final application. The main design consideration is ensuring that microphone and line inputs are correctly configured, bypassed, and referenced. I2S clocking, digital microphone power sequencing, analog grounding, and WLP assembly must be validated together rather than treated as independent blocks. Use the manufacturer datasheet and recommended application information for the complete pin mapping, electrical limits, and PCB land pattern. This product page synthesizes verified manufacturer descriptions, distributor availability, package information, pricing references, and practical design guidance. Because the supplied data does not include a complete verified pin table or all electrical limits, missing values are explicitly marked rather than inferred. Engineers should consult the Analog Devices MAX98090 datasheet before finalizing a high-volume or safety-critical portable-audio design.
MAX9926UAEE+ - 4.5-5.5V VR Sensor Interface | Maxim
The Maxim Integrated MAX9926UAEE+ is a 4.5 V to 5.5 V variable-reluctance sensor interface with differential input, adaptive peak-threshold detection, zero-crossing detection, and logic output in a 16-pin QSOP package. It is designed to turn the small, changing voltage produced by automotive magnetic-coil sensors into robust digital pulses for position, speed, crankshaft, camshaft, and transmission-shaft measurement. A variable-reluctance sensor interface, also called a VR sensor interface or magnetic-coil sensor interface, belongs to the sensor-interface IC hierarchy and conditions signals that would otherwise be difficult for a controller to measure directly. The MAX9926 family combines a precision amplifier, comparator, selectable adaptive peak threshold, and zero-crossing circuitry so the system can detect sensor peaks and timing events while reducing sensitivity to signal-shape and operating-condition changes. The verified product information identifies the MAX9926UAEE+ as a variable-reluctance sensor interface with differential input and adaptive peak threshold in a 16-pin QSOP package. The listed operating supply range is 4.5 V to 5.5 V, and distributor material describes a typical 4.7 mA supply current. The differential input structure supports rejection of common-mode disturbance, while the adaptive threshold is intended to preserve detection performance as sensor amplitude and operating conditions vary. The MAX9926UAEE+ is suited to automotive ignition and engine-position systems, transmission and wheel-speed sensing, industrial magnetic pickup sensing, and other applications where a magnetic target moves relative to a coil. Its logic output gives a downstream microcontroller or engine controller a digital event for timing, direction, or position interpretation. The 16-pin QSOP format also supports compact PCB layouts, although pin-level verification is required before layout release. The principal design consideration is preserving the sensor signal path from the coil to the differential inputs. Route the sensor traces as a short, tightly coupled pair, provide appropriate input conditioning and filtering according to the manufacturer datasheet, and maintain a stable ground reference. Avoid long parallel runs or sharp impedance discontinuities that could degrade noise immunity. This product page consolidates the verified manufacturer identity, package, supply information, distributor availability references, and application context. Detailed electrical limits, pin names, threshold timing, temperature ratings, and exact replacement parameters should be confirmed against the current MAX9926 datasheet before production release.
MC14407L - Full-Duplex 8-Bit PCM Codec | Motorola
Motorola MC14407L is a full-duplex 8-bit companded PCM codec designed for telecommunications interface applications. The verified source information identifies A-law and mu-law companding support, a 24-pin CDIP package, and an operating temperature range of -40°C to +85°C. Its principal function is to convert between 8-bit companded PCM voice signals and the parallel digital interface used by a telecommunications system. A PCM codec is a semiconductor interface IC that performs the digital conversion required by pulse-code-modulation communication systems. In the hierarchy of electronic components, a codec belongs to the interface IC and telecom-interface categories, between general-purpose integrated circuits and complete voice-processing subsystems. Companded PCM reduces the number of bits required to represent selected voice-amplitude ranges while retaining a representation suitable for transmission over digital communication links. The MC14407L supports both A-law and mu-law operation, allowing it to match common digital telephony signaling conventions. Its full-duplex architecture supports simultaneous transmit and receive signal paths, making it suitable for channel interfaces, terminal adapters, and telecommunications equipment that exchange PCM data with a line interface or digital switching system. The 24-pin CDIP package also provides a through-hole construction for systems assembled with conventional axial or DIP-compatible processes. Operation across -40°C to +85°C supports industrial-temperature telecommunications equipment, although the available evidence does not specify a modern automotive qualification. The MC14407L is a legacy Motorola Semiconductor device rather than a contemporary lead-free-focused component. Consequently, engineers should confirm current availability, original construction details, obsolete-material conditions, and revision-specific timing or electrical limits against the manufacturer datasheet and the authorized distributor documentation before committing a new design. Typical uses include PCM switching interfaces, digital telephone terminal equipment, voice-channel converters, telecommunications multiplexers, and embedded systems that need an A-law or mu-law PCM codec. System-level implementation also depends on the connected line-interface or DSP device, clocking arrangement, signal framing, and board-level decoupling specified in the original design documentation. The principal design consideration is that MC14407L is a legacy through-hole codec, so a modern replacement cannot be selected from package size alone. The replacement should be verified for pin-to-pin behavior, clock mode, companding law, power requirements, timing margins, and channel direction. This page synthesizes the verified distributor and datasheet references, sourcing information, and cautious replacement guidance that are not consolidated in a single manufacturer product page.
MC145010P Photoelectric Smoke Detector IC | NXP
The NXP MC145010P is a CMOS photoelectric smoke-detector integrated circuit with an I/O interface, a supply current of 12 µA, and a 16-pin through-hole DIP package. It is designed to operate with an infrared photoelectric chamber and contains the low-power analog and digital circuitry required to evaluate smoke-related optical conditions. The device supports voltage output and includes an interconnectable I/O function for linking smoke-detector units. A photoelectric smoke detector IC is a specialized sensor-interface and signal-processing component. Unlike a simple photointerrupter, it coordinates an infrared light source, an optical chamber, and detection electronics within the broader smoke-alarm system. The MC145010 family belongs to the CMOS integrated-circuit hierarchy and is intended for compact, low-power residential and commercial alarm equipment where response accuracy and standby power are important. The principal operating characteristics include very-low-power CMOS circuitry, a 12 µA supply current, photoelectric input sensing, voltage output, and an I/O pin that can be interconnected with other detector units. The I/O arrangement permits up to 40 units to share common signaling according to the manufacturer documentation. A local smoke condition activates the short-circuit-protected I/O driver to notify remotely connected units and can also support functions such as escape-light activation. Technically, the MC145010P combines analog detection functions with digital control and signaling in one package. The analog section interfaces with the infrared photoelectric chamber, while the digital section manages detector behavior, output signaling, and inter-unit communication. This integration reduces the number of discrete components required in a smoke-alarm design while maintaining a very-low 12 µA supply current. Its 16-pin DIP format also supports through-hole assembly and hand-repairable industrial appliance construction. Typical applications include residential photoelectric smoke alarms, commercial building alarm panels, interconnected multi-unit smoke-detection systems, and low-power safety appliances. The device is particularly appropriate where an infrared chamber is used instead of an ionization chamber and where low standby consumption supports long-lived battery operation. The I/O function can connect detectors across a larger installation so that a local alarm condition can be communicated to remote units. When designing around the MC145010P, follow the manufacturer pin-description and maximum-rating tables when assigning chamber, supply, output, and I/O connections. Preserve the recommended bypass and interconnection arrangements, and verify that the detector’s electrical thresholds match the selected chamber and infrared emitter. Because the I/O line can connect multiple units, check noise immunity, fault propagation, and short-circuit behavior across the completed system. This page organizes the product specifications, sourcing information, application guidance, and verified references for engineers evaluating the MC145010P. It also distinguishes a verified drop-in replacement from related parts that cannot be assumed to share the same footprint, preventing a functionally similar component from being treated as a safe PCB-level substitution.
MC145011P Photoelectric Smoke Detector IC | NXP
NXP Semiconductors MC145011P is a CMOS photoelectric smoke detector interface IC designed for line-powered smoke-detector applications. It accepts an infrared photoelectric chamber, combines very-low-power analog and digital circuitry, and includes an I/O function for detector-system integration. The device is packaged as a 16-pin plastic dual in-line package, identified by the MC145011P ordering code. A photoelectric smoke detector IC is a specialized interface circuit that connects an optical sensing chamber to the rest of an alarm system. Its internal analog and digital sections condition the chamber signal, evaluate smoke-related conditions, and support low-power operation. In the broader device hierarchy, the MC145011P belongs to sensor and detector interface ICs, connecting a physical sensing element to a line-powered embedded alarm system. The principal feature is the CMOS implementation described for the MC145011 family, combining analog signal processing with digital control while emphasizing low power consumption. The IC is intended to operate with an infrared photoelectric chamber rather than relying on a purely ionization-based sensing arrangement. Its I/O capability allows the detector assembly to participate in system signaling and alarm-state control without requiring every function to be implemented by a separate microcontroller. The MC145011 family architecture is intended for compact, battery-conscious alarm products. Low-power operation is particularly important because residential smoke alarms are expected to remain installed for years and often derive operating energy from a line-connected alarm circuit. The integrated analog and digital circuitry reduces the external support circuitry required for optical chamber signal conditioning, threshold evaluation, and system interfacing. Typical applications include residential photoelectric smoke alarms, commercial alarm panels, and other line-powered fire-detection products. A typical design places the MC145011P beside an infrared photoelectric chamber, connects the chamber elements and required timing or filtering components, and uses the I/O interface to communicate with the alarm system. Exact component values, operating limits, timing thresholds, and test points should be selected from the manufacturer application guidance rather than inferred from general smoke-detector practice. Designers should preserve the pin assignment and layout architecture of the original MC145011P design when reusing an existing printed circuit board. The 16-pin plastic DIP package facilitates through-hole assembly and inspection, but its larger footprint differs from modern surface-mount detector-controller packages. Validate chamber sensitivity, alarm thresholds, startup behavior, standby current, and regulatory performance on the final mechanical and optical assembly. This product page combines the identified package and application characteristics with practical guidance for smoke-alarm integration. It also distinguishes the verified MC145011P identity from unconfirmed replacement devices, helping engineers decide when an existing footprint can be reused and when a redesigned detector interface is required.
MC145012P Photoelectric Smoke Detector IC | NXP
The NXP Semiconductors MC145012P is a CMOS photoelectric smoke detector integrated circuit with an I/O interface and temporal-pattern horn driver, designed for use with an infrared photoelectric chamber. Its stated operating voltage range is 6 V to 12 V, its average supply current is 8 µA, and it is supplied in a 16-pin plastic dual in-line package. A photoelectric smoke detector is a safety sensor that detects airborne smoke or other aerosols through light scattering. The MC145012 integrates low-power analog and digital circuitry, an infrared sensing interface, an I/O connection for unit interconnections, and the timing and drive functions required for a pulsed horn. This places the component within the hierarchy of sensor interface IC, smoke detector circuit, alarm-system component, and integrated circuit. The principal functional features are photoelectric chamber support, I/O capability, and temporal-pattern horn drive. The low average supply current of 8 µA is particularly important for battery-backed household alarms because it reduces standby energy consumption. The 6 V to 12 V operating range is compatible with common alarm-system supply arrangements, while the I/O pin provides a path for coordinating interconnected smoke alarms. Internally, the device combines sophisticated very-low-power analog circuitry with digital control and timing functions. Detection occurs when scattered infrared light from smoke particles or other aerosols reaches the sensing input. The detector circuitry evaluates this signal and, upon a detected alarm condition, causes the horn output to follow a pulsating temporal pattern. The manufacturer identifies the circuit as designed for operation in compliance with UL217 and UL268. Typical applications include residential photoelectric smoke alarms, interconnected smoke-alarm networks, commercial building alarm panels, and low-power battery-operated safety products. The same device can serve both single-unit and interconnected alarm designs because its I/O pin supports coordination between multiple detectors, while the horn-driver section provides the required temporal signaling output. A key implementation consideration is the relationship between the chamber, analog signal path, and alarm timing. Component placement, grounding, supply bypassing, and the external chamber interface should follow the manufacturer application circuit to preserve low-noise detection and reliable alarm signaling. The plastic DIP package also requires adequate spacing from heat sources and careful observation of lead orientation during assembly. This product summary consolidates the manufacturer identification, functional description, operating limits, package information, and design intent into an engineering-focused reference. It also distinguishes the MC145012P from generic smoke-detector transistors by documenting its complete photoelectric detection, I/O, and temporal horn-drive roles in one component.
MC145017P - Low-Power Ionization Smoke Detector IC | NXP
NXP Semiconductors MC145017P is a low-power CMOS ionization smoke detector IC with a temporal-pattern horn driver, a 12 µA supply current, and a 16-pin PDIP package. Designed for use with an external ionization chamber, the device detects smoke, evaluates the chamber signal, and activates an external piezoelectric transducer through its internal horn-driver circuitry. Its operating-temperature range is -10°C to 60°C. An ionization smoke detector is a safety appliance that uses a radiation-based sensing chamber to identify airborne smoke particles. The MC145017 belongs to the sensor and detector interface hierarchy: it accepts an analog signal from the ionization chamber, applies internal detection logic, and controls a piezoelectric alarm. This architecture allows the sensitive ionization chamber, resistive components, and acoustic transducer to remain separate from the monolithic CMOS control circuit. The principal features of the MC145017P include very low 12 µA supply current, CMOS construction, an ionization-sensor input, a voltage output, and a temporal-pattern horn driver for an external piezoelectric transducer. Low supply current is important in battery-operated alarm systems because the detector electronics and sensing chamber must maintain useful standby and alarm performance without imposing excessive load on the backup battery. The MC145017 is designed to operate with an ionization chamber and a small number of external components. According to the NXP MC145017 datasheet, the associated circuit is intended for smoke-detector systems designed to comply with UL217 and UL268 specifications. The temporal horn pattern provides an intermittent alarm signal, while the low-power CMOS control section supports battery-powered installations where standby current is a primary design constraint. Typical applications include residential ionization smoke alarms, commercial smoke-detector modules, and legacy alarm-system replacements that retain the MC145017P pinout. Because the part is listed as obsolete, engineers should treat it primarily as a maintenance component for equipment already built around this device. New smoke-alarm designs should also evaluate current-generation detector ICs against applicable safety requirements rather than assuming an obsolete part can be introduced into a newly certified product. Circuit design requires careful treatment of the ionization-chamber interface, alarm-driver output, supply decoupling, and test points. Keep sensitive input routing away from the piezoelectric drive path, provide the external components specified by the manufacturer, and verify startup, smoke-entry, alarm-sound, and battery-fallback behavior in the complete detector assembly. The 16-pin PDIP package also requires adequate hole spacing and through-hole assembly clearance on the PCB. This page consolidates the MC145017P electrical characteristics, package information, application context, and selection considerations into an engineering-focused guide. It also documents the absence of a verified pin-compatible substitute set and highlights the product's obsolete lifecycle status, helping engineers distinguish usable legacy replacements from components that merely perform a similar smoke-detection function.