מיקרו-בקרים

מוצרים (20,000+)

PIC16F1764-I/SL - 8-Bit 32MHz MCU, 7KB Flash, 14-SOIC | Microchip
PIC16F1764-I/SL

PIC16F1764-I/SL - 8-Bit 32MHz MCU, 7KB Flash, 14-SOIC | Microchip

The Microchip Technology PIC16F1764-I/SL is an 8-bit PIC® XLP™ microcontroller IC running at 32 MHz, integrating 7 KB (4K x 14) of Flash program memory, 512 bytes of RAM, and a 10-bit DAC on a 14-pin SOIC package. According to distributor catalog data, this member of the PIC16F176x family combines intelligent analog peripherals with digital peripherals to suit a variety of mixed-signal applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip based on a RISC or CISC core that fetches 8-bit-wide instructions and executes them deterministically. PIC microcontrollers sit within the broader microcontroller family tree: PIC16 -> PIC mid-range 8-bit MCU -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. The XLP™ (eXtreme Low Power) designation indicates an ultra-low-power variant optimized for battery-backed and energy-harvesting designs. Key features include 7 KB Flash program memory, 512 bytes SRAM, an integrated 10-bit DAC, an operational amplifier, zero-cross detect (ZCD), high-current 100 mA I/Os, peripheral pin select (PPS), three configurable logic cells (CLC), 10/16-bit PWMs, and a wide operating voltage range of 2.3 V to 5.5 V. The combination of intelligent analog integration and flexible digital peripherals reduces external component count. The device uses an 8-bit PIC RISC Harvard architecture with separate program and data buses, allowing simultaneous fetch and execute cycles. The 32 MHz internal oscillator (8 MIPS instruction throughput) plus integrated peripherals (DAC, op-amp, ZCD, CLC, PPS) enable system-level cost reduction by replacing several discrete analog ICs with a single MCU. Typical applications include LED lighting control (constant-current drivers with dimming), capacitive-touch user interfaces, sensor signal conditioning with integrated op-amps, motor control with PWM, and small consumer appliances. The 14-SOIC package suits hand-soldering and through-hole-style prototyping while still being surface-mount compatible. When designing with this part, plan decoupling with a 100 nF ceramic capacitor placed within 3 mm of the VDD pin and consider using the integrated op-amp and DAC to remove external analog components. For battery-powered applications, leverage the XLP sleep modes to reduce quiescent current into the nanoampere range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single-page engineering summary optimized for component selection.

RFQ צור קשר
PIC16F1764-I/ST - 8-Bit 32MHz 7KB Flash MCU | Microchip TSSOP-14
PIC16F1764-I/ST

PIC16F1764-I/ST - 8-Bit 32MHz 7KB Flash MCU | Microchip TSSOP-14

The Microchip Technology PIC16F1764-I/ST is an 8-bit PIC® XLP™ 16F microcontroller IC featuring a 32 MHz CPU, 7KB (4K x 14) of Flash program memory and 512 bytes of RAM, housed in a 14-pin TSSOP package. It operates across a 2.5V/3.3V/5V industrial voltage range and is rated for -40C to +85C ambient operation, making it suitable for consumer, industrial and battery-powered embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a mix of digital and analog peripherals. Within the broader hierarchy, the PIC16F1764 belongs to the 8-bit microcontroller family -> PIC16 family -> PIC® XLP™ (eXtreme Low Power) series -> Microchip's 14/20-pin mid-range MCU product line. The 'XLP' branding indicates the device family is engineered for ultra-low active and sleep current, supporting long-life battery and energy-harvesting applications. Key features include intelligent analog integration with 10-bit ADC, 10-bit DAC, operational amplifiers, zero-cross detect, high-current I/O pins, and programmable logic. According to Microchip documentation, the device also integrates the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) peripherals, allowing designers to replace discrete analog and timer circuitry with on-chip resources. The 14-pin TSSOP footprint (4.40mm body width) enables compact PCB designs while still exposing the full peripheral set. Typical applications include LED lighting control, sensor signal conditioning, consumer appliances, IoT edge nodes, and small motor-control loops. The 10-bit DAC and op-amp peripherals make it particularly well suited to closed-loop analog control without an external analog front-end. When designing with this part, verify the TSSOP-14 pad pattern against your PCB footprint library before layout - the ST suffix in the MPN specifically denotes the 14-pin TSSOP industrial-temperature variant. Pair the device with MPLAB X IDE and the XC8 compiler for development. This page synthesizes distributor pricing, pin-compatible alternatives in the same TSSOP-14 footprint, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
PIC16F1764T-I/ML - 8-bit 32MHz 7KB Flash MCU 16-QFN | Microchip
PIC16F1764T-I/ML

PIC16F1764T-I/ML - 8-bit 32MHz 7KB Flash MCU 16-QFN | Microchip

The Microchip Technology PIC16F1764T-I/ML is an 8-bit PIC microcontroller from the PIC16F176X family, delivering 32 MHz CPU performance with 7 KB (4K x 14) of Flash program memory and a 16-pin QFN (4x4 mm) package. It belongs to the PIC XLP eXtreme Low-Power family and integrates intelligent analog peripherals, including 10-bit A/D converters, operational amplifiers, zero-cross detect, high-current I/Os, programmable logic, and high-resolution PWM for motor and lighting control. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/EEPROM/RAM), and peripherals on one die. The 8-bit MCU class, anchored by Microchip's PIC architecture, is widely used where deterministic real-time response, low power, and small footprint outweigh raw throughput. Within that hierarchy, the PIC16F176X line targets mixed-signal embedded designs that need both analog conditioning and digital control without a separate analog front-end. Key features include 32 MHz operation (8 MHz instruction rate with 4-cycle pipeline), 7 KB self-programmable Flash, 256 bytes EEPROM emulation via data EEPROM, 512 bytes RAM, 12-channel 10-bit ADC, two op amps, two 10-bit DACs, two comparators, a zero-cross detector, four 16-bit PWM with independent time bases, and configurable logic cells. The QFN-16 package exposes 14 I/O pins and supports industrial -40C to +85C operation. Brown-out reset, watchdog timer, and low-power sleep modes (nanowatt range) are also integrated. Architecturally, the device uses a RISC-style Harvard core with 49 single-word instructions, deterministic interrupt latency, and a wide operating voltage range of 2.3V to 5.5V. The high-current I/O drivers can source/sink up to 50 mA per pin, eliminating external drivers for LED arrays, relays, and small solenoids. Typical applications include LED lighting control (constant-current drivers with high-resolution PWM for dimming), sensor signal conditioning (using on-chip op amps), small motor and fan control (with complementary PWM outputs), AC zero-cross switching for TRIAC/SSR drive, and consumer appliance control panels. Designers value the analog integration because it shrinks the BOM in space-constrained cost-sensitive products. A design consideration for the 16-QFN is thermal pad connection to the PCB ground plane to keep junction temperature in spec; expose-pad soldering is critical for mechanical reliability and thermal performance. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet to help engineers evaluate, source, and design with the PIC16F1764T-I/ML efficiently.

RFQ צור קשר
PIC16F1764T-I/SL - 8-Bit MCU, 7KB Flash, 10-bit DAC, 14-SOIC
PIC16F1764T-I/SL

PIC16F1764T-I/SL - 8-Bit MCU, 7KB Flash, 10-bit DAC, 14-SOIC

The Microchip Technology PIC16F1764T-I/SL is an 8-bit RISC flash microcontroller in the PIC16F176x family, integrating intelligent analog peripherals (10-bit ADC, 10-bit DAC, op amps, and zero-cross detect) with digital peripherals on a single die. It delivers up to 32 MHz CPU performance from a 7 KB (4K x 14) Flash program memory backed by 512 bytes SRAM and 128 bytes data EEPROM, all housed in a 14-pin SOIC (SL) industrial-temperature-grade (-40C to +85C) package. The "T" suffix denotes tape-and-reel packaging for high-volume SMT assembly. The device supports 1.8 V to 5.5 V operation with Microchip's eXtreme Low Power (XLP) technology, making it suited to both line-powered and battery-backed applications. An 8-bit microcontroller (MCU) is a small computing system on a single integrated circuit containing a CPU, program memory (Flash), data memory (RAM/EEPROM), and configurable I/O peripherals. The PIC16F1764T belongs to the PIC16 family of mid-range microcontrollers from Microchip, which sits within the broader 8-bit MCU category alongside AVR and 8051 architectures, targeting cost-sensitive and power-constrained designs. Modern PIC16 devices integrate traditional digital I/O with programmable analog blocks, allowing designers to replace discrete op-amps, comparators, and DACs with on-chip resources. Key features include up to 12 channels of 10-bit ADC, a 10-bit DAC with internal references, two operational amplifiers, a zero-cross detect module for TRIAC/SSR control, four 16-bit PWM modules with complementary outputs, four configurable logic cells (CLC), high-current I/O pins capable of sourcing/sinking up to 50 mA, and the enhanced Mid-Range 16-bit instruction set. XLP sleep currents below 100 nA (typical) enable multi-year battery life in IoT sensor nodes. Architecturally, the PIC16F1764T uses the enhanced mid-range core (16-bit instruction width, 8-bit data path) with a single-cycle hardware multiplier. Internal configurable logic cells (CLC) allow hardware-level combinational/sequential logic independent of CPU execution, offloading tasks such as waveform generation and event sequencing. The integrated op amps and DAC enable closed-loop analog control without external analog ICs. Typical applications include LED lighting drivers (constant-current regulation via op-amp + DAC), TRIAC/SSR dimmer control (zero-cross detect + PWM), small appliance control (coffee machines, fans), battery-powered IoT sensor nodes, smart metering front ends, and sensor signal conditioning with on-chip amplification. The 14-SOIC footprint keeps the BOM compact and the PCB area minimal. When designing with this device, allocate careful attention to analog supply decoupling - separate AVDD/AVSS from VDD/VSS with ferrite beads and 100 nF + 10 uF local caps to preserve the ADC and DAC accuracy. Configure unused I/O as outputs low to minimize sleep current, and use the CLC modules to offload time-critical tasks from the CPU, freeing MIPS for application logic. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select and integrate the PIC16F1764T-I/SL quickly.

RFQ צור קשר
PIC16F1764T-I/ST - 8-Bit MCU, 7KB Flash, 32MHz, 14-TSSOP | Microchip
PIC16F1764T-I/ST

PIC16F1764T-I/ST - 8-Bit MCU, 7KB Flash, 32MHz, 14-TSSOP | Microchip

The Microchip Technology PIC16F1764T-I/ST is an 8-bit PIC16 microcontroller from the PIC16F176X family, integrating 7KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and a 32 MHz internal core clock in a 14-pin TSSOP surface-mount package. The device targets intelligent analog applications, pairing a 10-bit A/D converter with 10-bit DAC, operational amplifiers, zero-cross detect (ZCD) hardware, configurable logic cells (CLC), and high-current (100 mA) I/O pins to support a wide range of mixed-signal designs. An 8-bit microcontroller (MCU) is a programmable processor built around an 8-bit data bus, optimized for low power, deterministic real-time control, and high peripheral integration at low cost. The PIC16F176X sits in the hierarchy: microcontroller -> embedded MCU -> 8-bit MCU -> PIC16 family -> PIC16F176X sub-family, with the PIC® XLP™ (eXtreme Low Power) technology platform enabling deep sleep currents in the nanoamp range. These parts typically serve as the supervisory brain for power conversion, lighting, sensing, and motor/valve control where analog precision and timing accuracy matter more than raw throughput. Key features include 7KB Flash, 512 bytes SRAM, 256 bytes EEPROM, 10-bit ADC with computation (ADC2), a 10-bit DAC, two op amps, three 16-bit PWMs with complementary outputs and programmable dead-band, zero-cross detect, three configurable logic cells (CLC), peripheral pin select (PPS), high-current I/O capable of 100 mA source/sink, and an internal 32 MHz oscillator. The integrated op amps, ZCD, CLC, and high-current I/O distinguish the 176X family from generic 8-bit MCUs and remove the need for several external analog components. The architecture uses a Harvard RISC core with 49 instructions and a 14-bit instruction word, executed in two instruction cycles at 32 MHz (8 MIPS). On-chip peripherals share the data bus via a peripheral pin select (PPS) remap scheme that lets designers move digital functions to almost any I/O pin, simplifying PCB routing in tight 14-pin footprints. Typical applications include LED lighting controllers and drivers, TRIAC/SSR dimming with ZCD, AC power monitoring with op-amp signal conditioning, small BLDC or brushed-DC motor control loops using the 16-bit PWMs, battery chargers, smart sensors with on-chip op-amp front-ends, IoT edge nodes, and white-goods / appliance user interfaces. The high-current I/O lets the MCU directly drive relays, triacs, and LED strings without external drivers. When designing with this part, ensure that the maximum high-current I/O sink/source budget (per pin and per package) is respected: each pin is rated up to 100 mA but the total package dissipation must stay within thermal limits. Place a 0.1 µF decoupling capacitor on VDD as close as possible to the pin and add a bulk cap of at least 1 µF, while following Microchip AN(s) for oscillator layout and PPS remapping. This page synthesizes distributor pricing, drop-in TSSOP alternatives from Microchip and competitor families, and practical design notes not found in the standalone Microchip datasheet.

RFQ צור קשר
PIC16F1765-E/P - 8-Bit MCU 14KB Flash 32MHz 14-PDIP | Microchip
PIC16F1765-E/P

PIC16F1765-E/P - 8-Bit MCU 14KB Flash 32MHz 14-PDIP | Microchip

The Microchip Technology PIC16F1765-E/P is an 8-bit PIC® XLP™ microcontroller with 14KB (8K x 14) Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 14-pin PDIP through-hole package. It integrates an extensive analog peripheral set including a 10-bit A/D converter, a 10-bit DAC, op amps, zero cross detect (ZCD), three Configurable Logic Cells (CLCs), high-current 100mA I/Os, and Peripheral Pin Select (PPS). An 8-bit microcontroller is a small computing system on a single chip that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and programmable I/O peripherals. PIC microcontrollers use a modified Harvard RISC architecture with a single accumulator (W) and is part of the broader microcontroller > embedded controller > semiconductor taxonomy, optimized for low-power deterministic control in cost-sensitive applications. Key features include XLP (eXtreme Low Power) technology with deep sleep currents under typical sub-microamp levels, 10/16-bit PWM with complementary outputs, and integrated op amps that allow analog signal conditioning without external ICs. The 14-pin PDIP footprint supports breadboarding and legacy through-hole designs while the silicon is shared across the 14/20-pin PIC16(L)F176x family. Architecturally, the PIC16F1765 uses a 14-bit instruction word with a two-stage pipeline, supporting up to 32MHz operation and 125ns instruction cycle. The CLC peripherals allow configurable combinational/sequential logic that can replace small discrete glue-logic ICs. The 10-bit DAC with 5-bit calibration offers buffered analog output for set-point generation. Typical applications include LED lighting drivers using 16-bit PWM, motor control with complementary PWMs and ZCD for TRIAC dimming, sensor signal conditioning using the integrated op amps, and consumer appliances where cost, low power, and integrated analog are critical. The 'E' suffix indicates the -40C to +125C extended industrial temperature range. Design with the PIC16F1765 by ensuring ICD programming header access is preserved on the PCB, decoupling VDD with 100nF ceramic at all power pins, and following Microchip AN1078 for dsPIC/PIC MCU EMI layout guidance. Use the MPLAB XC8 toolchain for code development. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing engineers with a single reference for sourcing and design decisions on PIC16F1765-E/P.

RFQ צור קשר
PIC16F1765-E/SL - 8-bit MCU, 14KB Flash, 32MHz, 14-SOIC | Microchip
PIC16F1765-E/SL

PIC16F1765-E/SL - 8-bit MCU, 14KB Flash, 32MHz, 14-SOIC | Microchip

The Microchip Technology PIC16F1765-E/SL is an 8-bit PIC microcontroller from the PIC16F176x family featuring 14KB of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, housed in a 14-pin SOIC package. The device integrates intelligent analog peripherals including a 10-bit DAC, operational amplifiers, zero-cross detect (ZCD), configurable logic cells (CLC), and high-current I/O pins rated up to 100 mA. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and programmable I/O peripherals on one die. Within the broader semiconductor hierarchy, MCUs belong to integrated circuits, sit under microcontrollers, and form the foundation of embedded systems in everything from household appliances to industrial controllers. The PIC16F1765 specifically is an 8-bit MCU - its CPU datapath and registers are 8 bits wide, which is sufficient for control-oriented applications where cost, deterministic behavior, and ease of programming outweigh the need for high arithmetic throughput. Microchip's eXtreme Low Power (XLP) technology is also embedded in this family, enabling sleep currents suitable for battery-powered designs. Key features include a 10-bit Analog-to-Digital Converter (ADC), a 10-bit Digital-to-Analog Converter (DAC), up to three operational amplifiers, three Configurable Logic Cells (CLC), Peripheral Pin Select (PPS) for flexible signal routing, 10/16-bit PWMs with complementary outputs, a zero-cross detect module, and high-current I/O capable of directly driving LEDs or relays without external transistors. The device operates across -40C to +125C industrial temperature range. The PIC16F1765 is built on Microchip's enhanced mid-range 8-bit core architecture with a 14-bit instruction word and a 32MHz maximum clock, delivering up to 8 MIPS of computational throughput. Its intelligent analog integration combines traditional digital MCU peripherals with operational amplifiers and a DAC on-chip, reducing external component count and PCB area for sensor-conditioning, signal-generation, and mixed-signal control designs. Typical applications include LED lighting drivers, switched-mode power supply (SMPS) control, battery chargers, fan/motor control, sensor signal conditioning, and consumer white goods. The combination of op amps, DAC, CLC, and ZCD on a single die makes it especially well-suited to closed-loop analog control without external op-amp ICs. When designing with the PIC16F1765, note that the 14-pin SOIC (SL) variant has fewer I/O than the 20-pin QFN/P-DIP options; engineers needing additional pins should consider the PIC16F1768 or PIC16F1769 in 20-pin packages. Decoupling capacitors (100 nF + 10 uF) should be placed within a few millimeters of VDD/AVDD/VSS/AVSS pins. This page synthesizes distributor pricing for the PIC16F1765-E/SL, drop-in compatible alternatives from the PIC16F176x family, and practical design notes beyond what is found in the Microchip datasheet - enabling engineers and buyers to make pin-compatible sourcing decisions quickly.

RFQ צור קשר
PIC16F1765-E/ST - 8-bit MCU 14KB Flash 10-bit DAC | Microchip Technology
PIC16F1765-E/ST

PIC16F1765-E/ST - 8-bit MCU 14KB Flash 10-bit DAC | Microchip Technology

The Microchip Technology PIC16F1765-E/ST is an 8-bit PIC microcontroller with 14KB Flash, 1KB RAM, and integrated 10-bit DAC, housed in a 14-pin TSSOP package. According to the manufacturer datasheet, the device combines intelligent analog peripherals with digital control features for cost-sensitive embedded applications. Key features include a 10-bit A/D converter, operational amplifiers, zero-cross detect, high-current I/Os, programmable ramp generator with slope compensation, peripheral pin select (PPS), and a 10-bit DAC. The 14-pin TSSOP package supports surface-mount designs where PCB real estate is constrained, while the wide operating voltage range from 2.3V to 5.5V allows battery-powered and industrial 5V operation. The -E suffix denotes the extended industrial temperature grade of -40C to +125C. The PIC16F1765 uses Microchip's enhanced mid-range 8-bit core with a 32MHz internal oscillator option, providing deterministic instruction execution. Intelligent analog integration reduces external component count - the integrated op amps and 10-bit DAC enable closed-loop control without external signal conditioning. The peripheral pin select function remaps digital peripherals to any I/O pin, simplifying PCB layout and BOM optimization. Typical applications span LED lighting drivers, battery chargers, fan controllers, power-conversion secondary-side control, and sensor conditioning. Designers choose this part when a small-pin-count MCU with strong analog integration is required without the cost or complexity of larger Cortex-M devices. When designing with this device, verify that the chosen 14-pin TSSOP footprint accommodates the chosen debugger/programmer header. For production programming, reserve the ICSP pins (typically PGD/PGC) or use a bootloader over UART. The TSSOP package has moderate thermal performance and is well-suited to indoor enclosures with low ambient stress. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that are not available on the manufacturer datasheet alone. For pricing specifics, refer to the tiers[] section below; figures are based on distributor listings as of 2026-09-20.

RFQ צור קשר
PIC16F1765-I/P - 8-Bit 32MHz 14KB Flash MCU w/ DAC, Op-Amp | Microchip
PIC16F1765-I/P

PIC16F1765-I/P - 8-Bit 32MHz 14KB Flash MCU w/ DAC, Op-Amp | Microchip

The Microchip Technology PIC16F1765-I/P is an 8-bit RISC PIC® microcontroller featuring 14KB of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, housed in a 14-pin PDIP (P) through-hole package. It integrates intelligent analog peripherals including a 10-bit DAC, operational amplifiers, zero-cross detect (ZCD), and programmable ramp generator (PRG), while supporting 10/16-bit PWMs and configurable logic cells (CLC) for hardware customization. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory, and peripherals around an 8-bit data bus. Within the product hierarchy, the PIC16F1765 sits as: MCU -> 8-bit microcontroller -> PIC16 family -> PIC16F176x sub-family -> Flash-based XLP (eXtreme Low Power) devices. The 8-bit PIC architecture offers deterministic instruction execution, low power consumption, and a compact instruction set optimized for embedded control rather than raw throughput. Key features include 14KB Flash, 1KB RAM, 1024 bytes of EEPROM, 32MHz CPU speed, 12 ADC channels with 10-bit resolution, and 100mA high-current I/O capability. Peripherals include three 10/16-bit PWMs, three configurable logic cells (CLC), an internal temperature sensor, and peripheral pin select (PPS) for flexible signal routing. The XLP designation indicates ultra-low-power operation with sleep currents in the nanoampere range. The PIC16F1765 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiply support. Intelligent analog integration means that op-amps, comparators, DAC, and ADC are interconnected through internal analog routing, allowing sophisticated signal-conditioning topologies without external components. The 100mA high-current I/O simplifies direct LED and relay drive. Typical applications include LED lighting and drivers with smooth dimming, switched-mode power supply (SMPS) control, battery chargers, sensor conditioning, and general-purpose embedded control. The combination of high-current I/O, on-chip op-amps, and PWMs makes it especially suitable for closed-loop current/voltage regulation. Designers choose this part when they need mixed analog/digital integration in a small pin-count package without requiring the complexity of a 32-bit MCU. When designing with this MCU, ensure the ICSP programming pins (ICSPCLK/ICSPDAT) are accessible and consider PPS remapping to avoid signal conflicts. The internal 32MHz oscillator provides ±1% accuracy after calibration but is not suitable for applications requiring a precise clock; use an external crystal or resonator when USB, CAN, or precise timing is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Specifications verified against Microchip's PIC16F1765 datasheet and current distributor listings as of 2026-09-20.

RFQ צור קשר
PIC16F1765-I/SL - 8-bit MCU, 14KB Flash, 32MHz, 14-SOIC | Microchip
PIC16F1765-I/SL

PIC16F1765-I/SL - 8-bit MCU, 14KB Flash, 32MHz, 14-SOIC | Microchip

The Microchip Technology PIC16F1765-I/SL is an 8-bit PIC16F microcontroller featuring a RISC CPU core operating up to 32 MHz, with 14 KB of Flash program memory (8K x 14 words) and 1 KB of SRAM, housed in a 14-pin SOIC (SL) package rated for the industrial -40C to +85C temperature range. Key highlights include integrated 10-bit ADC, 5-bit and 10-bit DAC modules, operational amplifiers, zero-cross detect, high-current I/O, programmable switch-mode control, and XLP (eXtreme Low Power) technology for energy-conscious embedded designs. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and integrated peripherals such as ADC, DAC, timers, and communication interfaces. The PIC16F1765 belongs to the broader 8-bit MCU category, which sits within the integrated circuit hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Despite its small 14-pin SOIC footprint, the PIC16F1765 provides analog integration comparable to devices in much larger packages, allowing designers to replace multiple discrete components with a single IC. The PIC16F1765 integrates four 10-bit DACs, op-amps, comparators and a high-resolution PWM engine for closed-loop analog control. XLP technology enables active currents measured in microamperes and deep sleep currents in the nanoampere range, making the device suitable for battery-powered applications that demand years of service life. The 32 MHz internal oscillator eliminates the need for an external crystal in many designs. Typical applications include LED lighting drivers, switched-mode power supplies, battery chargers, motor control loops, sensor signal conditioning, and low-power IoT edge nodes. The combination of intelligent analog peripherals and low-power sleep modes supports designs that previously required multiple ICs. When designing with this part, evaluate whether the 14-pin SOIC package has sufficient I/O for your application - larger PIC16F1768/1769 variants exist with the same peripheral set in 20- and 28-pin packages. Ensure the configuration words match your chosen clock, watchdog, brown-out and code-protect settings before programming production firmware. According to Microchip's family datasheet, a decoupling capacitor of 0.1 uF placed within 4 mm of VDD is recommended.

RFQ צור קשר
PIC16F1765T-I/ML - 8-Bit 32MHz 14KB Flash MCU 16-QFN | Microchip
PIC16F1765T-I/ML

PIC16F1765T-I/ML - 8-Bit 32MHz 14KB Flash MCU 16-QFN | Microchip

The Microchip PIC16F1765T-I/ML is an 8-bit PIC microcontroller from the PIC16F176X family, integrating intelligent analog peripherals with digital I/O in a compact 16-QFN (4x4 mm) package. The device operates at up to 32 MHz, delivers 14 KB of Flash program memory (8K x 14 words), 1 KB of RAM, and provides a rich set of analog blocks including 10-bit ADC and 10-bit DAC, op amps, zero-cross detect and high-current I/O capable of sourcing/sinking higher than typical GPIO current. An 8-bit microcontroller (MCU) is a single-chip processor based on an 8-bit data bus architecture, typically built around a Harvard or modified-Harvard core such as the Microchip PIC16 enhanced mid-range core. PIC microcontrollers integrate CPU, Flash program memory, SRAM data memory, EEPROM, and a configurable mix of peripherals (ADC, DAC, timers, PWM, comparators, communication interfaces) into one die. The PIC16F176X family sits in Microchip's eXtreme Low Power (XLP) tier and is engineered to combine intelligent analog with digital peripherals for sensor-conditioning, lighting control, and power-conversion feedback loops. As an MCU, it occupies the hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor device. Key features include 10-bit ADC with multiple channels, a 10-bit DAC, configurable op amps, zero-cross detect, high-current I/O drivers, multiple timers, PWM, configurable logic cells (CLC), and serial interfaces. The device supports industrial temperature operation (-40C to +85C for the -I variant) and is supplied in tape-and-reel packaging (T suffix). It is intended for applications where a balance of low power, integrated analog, and small footprint is required. The PIC16F1765T-I/ML uses an enhanced mid-range PIC16 core with a 14-bit instruction word, providing deterministic execution and simple assembly/C development. Internal peripherals are interconnected through Microchip's Peripheral Pin Select (PPS) and CLC fabric, allowing analog and digital signals to be routed between blocks without external components. Typical applications include LED lighting and driver control, sensor signal conditioning, motor control feedback, power-factor correction, zero-cross switching control, and small-form-factor consumer/industrial embedded nodes that need integrated op amps and DACs alongside a small microcontroller core. Designers should consult the PIC16F176X datasheet and family product page to map pin functions to the specific 16-QFN variant, since the PIC16F176X family is offered in 14- and 20-pin packages and the 16-QFN pinout must be matched against the chosen board layout. Tape-and-reel (-T) and QFN (-ML) suffixes identify the packaging option for high-volume SMT assembly. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16F176X and compatible PIC16F1xxx families, and practical design notes that are not duplicated on the manufacturer datasheet landing page.

RFQ צור קשר
PIC16F1765T-I/ST - 8-Bit MCU, 14KB Flash, 32MHz, 14-TSSOP | Microchip
PIC16F1765T-I/ST

PIC16F1765T-I/ST - 8-Bit MCU, 14KB Flash, 32MHz, 14-TSSOP | Microchip

The Microchip Technology PIC16F1765T-I/ST is an 8-bit PIC microcontroller from the PIC16F176x family, featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32 MHz internal oscillator housed in a 14-pin TSSOP package. It belongs to the PIC XLP (eXtreme Low Power) family and combines intelligent analog integration with digital peripherals for a variety of embedded applications. Key features of the PIC16F1765T-I/ST include a 10-bit ADC, 10-bit DAC, integrated op amps, zero-cross detect, high-current I/O pins, and the XLP nanoWatt sleep modes that extend battery life. The device operates from 2.3V to 5.5V across the industrial temperature range (-40C to +85C) and provides 12 I/O pins for interfacing with sensors, switches, and actuators. The PIC16F1765T-I/ST uses Microchip's enhanced mid-range 8-bit core with a hardware multiplier and a 32 MHz oscillator (8 MIPS instruction throughput). It integrates Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and signal measurement timers, allowing complex control loops without burdening the CPU. The TSSOP-14 package offers a compact footprint for space-constrained designs. Typical applications include LED lighting control (constant current drivers, dimming via PWM and zero-cross detection), capacitive-touch user interfaces, sensor signal conditioning using the on-board op amp, battery-powered IoT sensor nodes exploiting the XLP low-power modes, and small motor/solenoid control via the complementary waveform generator. The combination of analog and digital integration makes the part well suited to mixed-signal embedded designs. When designing with this part, ensure decoupling capacitors are placed close to VDD/VSS, route the high-current I/O traces with sufficient copper to handle their rated sink/source, and use the ICSP programming interface for in-circuit firmware updates. Verify the latest errata and Config Word settings from the Microchip datasheet before committing to layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.

RFQ צור קשר
PIC16F1768-E/P - 8-bit 32MHz 7KB Flash MCU 20-PDIP | Microchip
PIC16F1768-E/P

PIC16F1768-E/P - 8-bit 32MHz 7KB Flash MCU 20-PDIP | Microchip

The Microchip Technology PIC16F1768-E/P is an 8-bit PIC16 CMOS microcontroller running up to 32MHz with 7KB (4K x 14-word) of FLASH program memory and 256 bytes of data RAM, housed in a 20-pin PDIP through-hole package. It is part of the PIC16(L)F176X family that combines intelligent analog peripherals (10-bit ADC, op amps, zero-cross detect, high-current I/Os) with conventional digital peripherals, supporting up to two independent closed-loop channels. A microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data RAM, and programmable I/O peripherals on a single chip. Within the broader taxonomy it sits as: 8-bit MCU -> microcontroller -> embedded processor -> IC. The PIC16 family uses Microchip's enhanced mid-range RISC core with a 14-bit instruction word and Harvard architecture, providing deterministic instruction timing at 32MHz (8 MIPS) with extremely low power consumption suitable for battery and energy-harvesting designs. Key differentiating features of the PIC16F1768 include: 4 x 10-bit ADC channels, 2 x operational amplifiers, zero-cross detect for TRIAC/SCR control, high-current sink/source I/O pins (up to 50mA), 7KB self-programmable FLASH, and an integrated temperature indicator. The device operates from 2.3V to 5.5V with the standard PIC16F176X pinout and includes nanoWatt XLP (eXtreme Low Power) technology with sleep currents below 1 µA typical. The MCU uses a 14-bit instruction word with 35 standard instructions plus optimized branches, an 8-level hardware stack, and 49 SFRs. Internal peripherals such as the 10-bit ADC, comparators with selectable references, and configurable logic cells allow closed-loop analog control without external circuitry. This makes it well-suited to smart sensor, lighting, and motor-control applications. Typical applications include LED lighting drivers (constant-current regulation using the integrated op amps), TRIAC-based AC dimming (zero-cross detect), PIR/sensor signal conditioning, battery-powered IoT endpoints, and small motor control loops. The 20-PDIP package is favored for through-hole prototyping, hobbyist platforms, and industrial control modules where socketed replacement is desirable. When designing, ensure the ICSP/PGD/PGC pins are reserved for in-circuit programming and debug access. Decouple VDD with a 100nF ceramic cap placed within 5mm of the pin, and keep MCLR tied to VDD through a 10kΩ resistor for normal operation. Unused I/O should be configured as outputs low to minimize current draw. This page synthesizes distributor pricing, drop-in PIC16F176X-family alternatives with the same 20-pin PDIP footprint, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר
PIC16F1768-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 20-SOIC | Microchip
PIC16F1768-E/SO

PIC16F1768-E/SO - 8-Bit MCU, 32MHz, 7KB Flash, 20-SOIC | Microchip

The Microchip Technology PIC16F1768-E/SO is an 8-bit PIC® XLP™ flash microcontroller running up to 32 MHz with 7 KB (4K x 14 words) of program flash, 512 bytes of SRAM, and 128 bytes of data EEPROM, housed in a 20-pin SOIC (SO) package with industrial -40C to +125C operating range. It belongs to the PIC16(L)F176x family of 14/20-pin devices that combine intelligent analog peripherals (10-bit ADC, two op amps, zero-cross detect) with digital peripherals and high-current I/O. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM/EEPROM), and programmable I/O peripherals on one die. Within the broader hierarchy, the PIC16F1768 sits at microcontroller -> 8-bit MCU -> PIC16 family -> flash-based XLP MCU -> semiconductor. The "XLP" designation marks Microchip's eXtreme Low Power technology platform, which targets battery-powered and energy-harvesting designs with sub-microamp sleep currents and nanoWatt features. Key features include a 32 MHz internal oscillator, 10-bit ADC with computation (ADC2), two operational amplifiers, zero-cross detect (ZCD) for TRIAC and SCR control, high-current sink/source I/O, and configurable logic cells (CLC) for custom digital interconnects. These features enable sensor conditioning, signal generation, and closed-loop control from a single chip, replacing multi-component analog signal chains. The PIC16F1768 architecture uses a modified Harvard RISC core with a single-cycle instruction set, allowing deterministic timing for real-time control. The instruction-word length is 14 bits (4K words = 7 KB), and the device includes a 32 MHz internal oscillator with ±1% accuracy over temperature and voltage, removing the need for an external crystal in many applications. Typical applications include LED lighting drivers with dimming and color-mixing, TRIAC-based AC fan and motor speed controllers, white-goods user interfaces, sensor signal conditioning, and IoT edge nodes. The integrated op amps and 10-bit ADC allow direct interface to thermistors, photodiodes, and current-sense shunts. When designing with this device, configure the configuration words (CONFIG1/CONFIG2) for the desired oscillator, watchdog timer, brown-out reset, and code-protect settings. The 20-SOIC footprint simplifies hand-prototyping and breadboarded designs while remaining suitable for high-volume SMT assembly with MSL-1 moisture sensitivity. This page synthesizes distributor pricing (as of 2026-09-20), drop-in alternatives from the PIC16F176x family, and practical design notes not found in the manufacturer datasheet, giving engineers a single, citation-ready reference for component selection.

RFQ צור קשר
PIC16F1768-E/SS - 8-Bit MCU, 7KB Flash, 32MHz, 20-SSOP | Microchip
PIC16F1768-E/SS

PIC16F1768-E/SS - 8-Bit MCU, 7KB Flash, 32MHz, 20-SSOP | Microchip

The Microchip PIC16F1768-E/SS is an 8-bit PIC microcontroller from the PIC16F176x family, featuring 7KB (4K x 14 words) of Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM. It operates at up to 32MHz with an enhanced mid-range core, integrates a 10-bit ADC, a 10-bit DAC, operational amplifiers, zero-cross detect, and high-current I/O pins, all housed in a 20-pin SSOP (Shrink Small Outline Package). A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), and programmable peripherals. The PIC16F1768 belongs to the 8-bit microcontroller class — a category optimized for low power, deterministic real-time control, and simple instruction sets. Within Microchip's hierarchy it sits under PIC16F (mid-range 8-bit) → 8-bit MCU → microcontroller → embedded processor → semiconductor. It targets applications requiring mixed analog/digital integration such as LED lighting, sensor conditioning, and power conversion feedback loops. Key differentiating features include the 10-bit DAC with computation, two op-amps, a zero-cross detect module for TRIAC/SSR control, high-current I/O capable of sourcing/sinking higher than standard logic, and eXtreme Low Power (XLP) technology for battery-friendly operation. The device supports 1.8V–5.5V operation across -40C to +125C industrial temperatures and includes Core Independent Peripherals (CIPs) that offload timing-critical tasks from the CPU. Architecturally the PIC16F1768 uses a 14-bit instruction word RISC core with a hardware stack and interrupt-driven CIPs. Internal 32MHz oscillator, 5-bit DAC, complementary output generators, and configurable logic cells are designed to reduce external component count in motor, lighting, and signal-conditioning designs. Typical applications include LED lighting drivers, TRIAC-controlled dimmers, small DC motor and fan control, sensor signal conditioning, industrial control panels, and low-power IoT end nodes. Engineers frequently pair the PIC16F1768 with companion analog ICs for precision sensor front-ends. When designing with the PIC16F1768, ensure adequate decoupling (100nF + 1uF) near VDD, route the high-current I/O traces with sufficient copper weight, and verify op-amp stability under load capacitance. The MSSP and EUSART modules enable I2C/SPI/UART expansion without external glue logic.

RFQ צור קשר
PIC16F1768-I/ML - 8-Bit 32MHz MCU, 7KB Flash, 20-QFN | Microchip
PIC16F1768-I/ML

PIC16F1768-I/ML - 8-Bit 32MHz MCU, 7KB Flash, 20-QFN | Microchip

The Microchip PIC16F1768-I/ML is an 8-bit PIC microcontroller in the PIC16(L)F176X family, delivering 32 MHz CPU performance with 7 KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and 18 bytes of data EEPROM, all housed in a 20-pin QFN (4x4 mm) package. According to the Microchip product page, the device combines intelligent analog peripherals (10-bit ADC, 10-bit DAC, operational amplifiers, and zero-cross detect) with high-current I/O and digital peripherals to suit a broad range of mixed-signal embedded applications. The 'I' suffix denotes the industrial operating temperature range of -40C to +85C, and 'ML' identifies the 20-QFN package option. An 8-bit microcontroller (MCU) is a programmable computing core optimized for cost-sensitive, low-power embedded control. It executes one byte per instruction cycle using a Harvard architecture (separate program and data buses), making it deterministic and simple to integrate. PIC microcontrollers sit in the taxonomy of microcontroller -> embedded processor -> semiconductor IC, and the PIC16F1768 belongs to Microchip's enhanced mid-range PIC16 core family, which adds C-friendly instruction set features while preserving byte-level simplicity. Key differentiating features include 10-bit PWM with up to four independent outputs, configurable logic cells, complementary waveform generators suited to lighting and motor control, an integrated op-amp pair, zero-cross detect for AC-line signal conditioning, and XLP (eXtreme Low Power) technology that drops quiescent current below 100 nA in sleep mode. The 20-QFN footprint enables compact PCB designs typical of sensor-conditioning and lighting-control modules. Architecturally, the PIC16F1768 uses a 14-bit instruction word Flash program store with a hardware multiplier and a deep hardware interrupt stack. The peripheral pin select (PPS) engine remaps digital peripherals to almost any I/O pin, easing PCB routing for dense mixed-signal layouts, and the 10-bit ADC with internal voltage reference supports ratiometric sensor measurements without external references. Typical applications include LED lighting drivers, sensor signal conditioning, AC zero-cross switching, small motor control, battery-powered IoT end nodes, and consumer appliance front-panel controllers. The 32 MHz core and integrated op-amp also fit loop controllers in industrial process instrumentation. When designing with this device, prioritize PPS routing during schematic capture to keep analog and digital traces short, and budget PCB area for the 20-QFN thermal pad which must be soldered for rated thermal and electrical performance. Avoid leaving unused analog inputs floating; tie them to a defined rail to prevent shoot-through current in the input mux. This page consolidates distributor pricing, drop-in alternatives within the same 20-QFN footprint, and practical design notes that are not aggregated on the manufacturer datasheet alone.

RFQ צור קשר
PIC16F1768-I/SS - 8-Bit MCU, 7KB Flash, 20-SSOP | Microchip
PIC16F1768-I/SS

PIC16F1768-I/SS - 8-Bit MCU, 7KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16F1768-I/SS is an 8-bit RISC microcontroller from the PIC16(L)F176x family, featuring a 32MHz instruction-cycle core, 7KB (4K x 14 words) of Flash program memory and 512 bytes of SRAM, housed in a 20-pin SSOP package. Operating from 2.5V to 5.5V, it integrates intelligent analog peripherals including a 10-bit ADC, 10-bit DAC, 5-bit DAC, operational amplifiers, zero-cross detect, high-current I/O pins, and programmable switch-mode controller peripherals designed for SMPS and lighting applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC16F1768 belongs to Microchip's enhanced mid-range 8-bit PIC architecture, which sits between the baseline PIC10/12/16 families and the higher-end PIC18 family. Within the system hierarchy, it falls under: 8-bit microcontroller -> RISC MCU -> embedded microcontroller -> semiconductor. The enhanced mid-range core adds C compiler-friendly architecture, hardware stack, and a deep instruction set while maintaining the simplicity that makes PIC MCUs popular for low-power and cost-sensitive designs. Key features include 32MHz internal oscillator (8MHz instruction rate with 4x PLL or 32MHz direct), 4K x 14 Flash words, 512 bytes RAM, 14-channel 10-bit ADC with computation, two op-amps, 10-bit DAC and 5-bit DAC, four 16-bit PWMs, two Capture/Compare/PWM modules, Configurable Logic Cells (CLC), Numerically Controlled Oscillator (NCO), Complementary Waveform Generator (CWG), and Zero-Cross Detect (ZCD) peripherals for AC line voltage sensing. The XLP (eXtreme Low Power) technology delivers nanoWatt sleep currents below 100nA typical, making the part suitable for battery-powered and energy-harvesting designs. The PIC16F1768 implements a Harvard-architecture RISC core with 49 instructions, single-cycle execution except for program branches, and an interrupt controller with hardware context saving. The peripheral integration strategy places multiple configurable analog and timing blocks around the core, allowing a single chip to replace what would otherwise require discrete op-amps, PWM controllers and DACs. The Device Information Area (DIA) and device ID provide traceability and unique serialization for production runs. Typical applications include LED lighting and dimming controls (using CWG, 10-bit DAC and zero-cross detect), switched-mode power supplies (SMPS) using the dedicated programmable switch-mode controller peripherals, sensor signal conditioning leveraging on-chip op-amps and the ADC with computation, AC line voltage zero-cross detection for TRIAC/SCR triggering, and small motor control with complementary PWM outputs. The 20-SSOP form factor fits compact industrial and consumer modules. When designing with this part, plan I/O allocation early because most analog peripherals share I/O pins, and the CLC/NCO/CWG blocks must be routed to specific PPS pins. Provide a 0.1uF decoupling capacitor close to VDD and a bulk capacitor on AVDD if the ADC is used. Configure unused pins as outputs low to minimize power consumption. This page synthesizes distributor pricing, drop-in alternatives, PCB design notes and FAQs not found in a single manufacturer or distributor listing, giving procurement and engineering teams a single source of truth for PIC16F1768-I/SS evaluation.

RFQ צור קשר
PIC16F1768T-I/ML - 7KB Flash, 32MHz 8-Bit MCU | Microchip
PIC16F1768T-I/ML

PIC16F1768T-I/ML - 7KB Flash, 32MHz 8-Bit MCU | Microchip

The Microchip Technology PIC16F1768T-I/ML is an 8-bit PIC® XLP™ flash microcontroller integrating 7KB (4K x 14) of program memory, 512 bytes of SRAM, and a 32MHz internal oscillator in a 20-pin QFN (4x4 mm) package with an exposed thermal pad. The 'T' suffix denotes tape-and-reel packaging for high-volume assembly, and 'I' indicates the industrial -40C to +85C operating temperature grade. The MCU features intelligent analog integration including 10-bit ADC, 10-bit DAC with 100uA drive, two configurable operational amplifiers, zero-cross detect, and high-current I/O pins, targeting mixed-signal embedded designs. An 8-bit flash microcontroller is a single-chip computer that combines a CPU, non-volatile program memory (flash), RAM, and configurable peripherals on one die. The PIC16F1768 belongs to the PIC16 XLP family - 'XLP' stands for 'eXtreme Low Power' and indicates Microchip's nanoWatt XLP technology, which targets battery-operated and energy-harvesting designs where quiescent current directly determines service life. 8-bit MCUs occupy the lower tier of the embedded controller hierarchy below 16-bit and 32-bit Cortex-M devices, but offer the best cost-per-pin ratio for applications that do not require DSP performance or large memory maps. Key features include 7KB self-programmable flash with up to 100K erase/write cycles, 512 bytes SRAM, an internal 32MHz oscillator accurate to +/-1% across voltage and temperature, four 10-bit PWM modules, two operational amplifiers configurable as unity-gain buffers or inverting/non-inverting amplifiers, a 10-bit DAC with up to 100uA output drive, and zero-cross detect for AC line-signal interfacing. The 20-pin QFN (4x4 mm) package occupies 16 mm2 of PCB area, making it the most compact option in the PIC16F176x family and enabling miniaturized sensor and lighting nodes. The PIC16F1768 uses a 14-bit instruction-word RISC architecture with a single-cycle ALU, an 8-level hardware stack, and 49 instructions including hardware multiply. The device includes a configurable logic cell (CLC), complementary waveform generator (CWG), and numerically controlled oscillator (NCO) for flexible digital signal generation, reducing the need for external timing components. The peripheral pin select (PPS) allows most digital peripherals to be routed to almost any I/O pin, simplifying PCB layout and reducing routing constraints on compact 20-pin designs. Typical applications include LED lighting drivers using op-amp-based constant-current control and PWM dimming, sensor signal conditioning with on-chip op amps and DAC for offset/span trim, AC zero-cross detection for triac/SCR control of dimmers and small motor drives, appliance control panels, and IoT edge nodes requiring extended battery life. Industrial segments such as smart metering, building automation, and HVAC actuators also leverage its high-current I/O and integrated analog. When designing with this MCU, ensure the exposed pad of the QFN-20 is soldered to a copper pour of at least 0.5 cm2 to keep theta_JA within datasheet limits (typically ~35 C/W on a 4-layer JEDEC test board). The internal 32MHz oscillator avoids an external crystal in most applications, freeing the OSC1/OSC2 pins for digital I/O. This page consolidates distributor pricing, drop-in alternatives, and design notes drawn from the manufacturer datasheet.

RFQ צור קשר
PIC16F1769-E/P - 8-Bit 32MHz 14KB Flash MCU w/ DAC | Microchip
PIC16F1769-E/P

PIC16F1769-E/P - 8-Bit 32MHz 14KB Flash MCU w/ DAC | Microchip

The Microchip Technology PIC16F1769-E/P is an 8-bit PIC microcontroller from the PIC16F176x family, running at up to 32 MHz and integrating 14 KB (8K x 14 words) of Flash program memory, 1 KB of RAM, and intelligent analog peripherals in a 20-pin PDIP through-hole package. The -E suffix denotes the extended (-40C to +125C) operating temperature range. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path and Harvard architecture; the PIC16F1769-E/P belongs to the PIC16F family of mid-range microcontrollers, which sits in the broader hierarchy: PIC16F MCU -> 8-bit PIC -> Microchip MCU -> microcontroller -> embedded processor -> semiconductor. The 'F' suffix indicates Flash program memory, allowing in-circuit reprogramming. Key features of the PIC16F1769-E/P include two operational amplifiers, two 10-bit DACs, two configurable logic cells (CLC), zero-cross detect (ZCD), two programmable ramp generators (PRG), 10-bit ADC, high-current I/O (100 mA), Peripheral Pin Select (PPS), and two 10/16-bit PWMs with independent timing. The combination of on-chip op amps and DACs allows closed-loop analog control without external components, supporting LED lighting, power conversion, and sensor signal conditioning. Architecturally, the PIC16F1769-E/P uses Microchip's enhanced mid-range core (14-bit instruction width) with a modified Harvard bus, providing single-cycle instruction execution except for branches. The XLP (eXtreme Low Power) technology enables sleep currents below typical 8-bit MCU levels, making the device suitable for battery-powered or energy-harvesting designs. Typical applications include LED lighting drivers, closed-loop fan/thermal control, power conversion, sensor signal conditioning, and small appliance controls. Its 20-pin PDIP form factor is breadboard-friendly and favored in through-hole industrial designs. When designing with this part, ensure your programmer/debugger supports the PIC16F176x family (e.g., PICkit 3/4, MPLAB ICD) and verify the wide operating voltage range of 2.3V to 5.5V matches your rail. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

RFQ צור קשר
PIC16F1769-E/SO - 8-Bit MCU, 14KB Flash, 10-bit DAC | Microchip
PIC16F1769-E/SO

PIC16F1769-E/SO - 8-Bit MCU, 14KB Flash, 10-bit DAC | Microchip

The Microchip Technology PIC16F1769-E/SO is an 8-bit PIC16 microcontroller from the PIC® XLP™ 16F family, integrating 14KB (8K x 14 words) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator in a 20-pin SOIC package (7.50mm body width). The device belongs to the PIC16(L)F176x series, which combines intelligent analog peripherals with digital features targeted at cost-sensitive mixed-signal designs. According to the Microchip product page, the series integrates 10-bit ADC, operational amplifiers, zero-cross detect, high-current I/O, programmable logic cells, and a 10-bit DAC. The "-E" suffix designates the extended operating temperature range of -40C to +125C. An 8-bit microcontroller (MCU) is a single-chip computer that executes instructions on 8-bit data widths, balancing low power consumption, deterministic real-time response, and ease of programming for embedded applications. The PIC16F1769 occupies the mainstream tier of the Microchip 8-bit portfolio, positioned between baseline PIC10/12 devices and the high-performance PIC18 and dsPIC families. Within the broader taxonomy: MCU -> 8-bit microcontroller -> PIC16 family -> PIC16F176x sub-family -> PIC16F1769 specific part. Key differentiating features of the PIC16F1769-E/SO include the XLP™ (eXtreme Low Power) technology, which delivers sub-microamp sleep currents for battery-powered applications, and the integrated op-amp and DAC peripherals that eliminate the need for external analog components in many sensor-interface designs. The 32MHz maximum clock frequency (8MHz internal oscillator with 4x PLL) provides ample MIPS for closed-loop control loops, while the 14KB Flash supports application code sizes typical of appliance control, lighting ballast, and small motor control. Typical applications include LED lighting drivers (using the integrated op-amp and 10-bit DAC for current regulation), zero-cross detect for TRIAC control in solid-state relays, battery-powered sensor nodes leveraging XLP technology, and small appliance control boards requiring integrated analog signal conditioning. The high-current I/O pins (up to 100mA source/sink) simplify direct MOSFET gate drive without buffer transistors. When designing with this device, reserve adequate Flash for a bootloader if field firmware updates are required, and use Microchip's MPLAB X IDE with the XC8 compiler for development. Verify timing budgets against the 32MHz fOSC and consider the device's 3V minimum supply voltage for low-voltage designs.

RFQ צור קשר
PIC16F1769-E/SS - 8-Bit 32MHz MCU 14KB Flash SSOP-20 | Microchip
PIC16F1769-E/SS

PIC16F1769-E/SS - 8-Bit 32MHz MCU 14KB Flash SSOP-20 | Microchip

The Microchip PIC16F1769-E/SS is an 8-bit PIC16 microcontroller from the PIC16(L)F176X family, featuring 14KB of Flash program memory, 1KB of RAM, and integrated intelligent analog peripherals in a 20-pin SSOP package. Operating at up to 32MHz, this MCU combines a precision analog front-end (10-bit ADC, op amps, 10-bit DAC, zero-cross detect) with digital peripherals including high-current I/Os and programmable logic. What is a PIC16 microcontroller? The PIC16 is a family of 8-bit RISC microcontrollers from Microchip based on a modified Harvard architecture. They belong to the broader category of microcontrollers (MCUs) -> embedded controllers -> semiconductor ICs, and are widely used for low-power, cost-sensitive embedded applications. The 'XLP' designation indicates eXtreme Low Power technology, making the PIC16F1769 well-suited to battery-powered and energy-harvesting designs. Key differentiating features include 14KB (8K x 14) Flash, 1KB RAM, integrated op amps, zero-cross detection, high-current I/O pins capable of directly driving LEDs and relays, and a 10-bit Digital-to-Analog Converter (DAC). The 32MHz maximum clock speed delivers 8 MIPS instruction throughput, supporting real-time control loops without external timers. The device uses a Harvard RISC architecture with a 14-bit instruction word, allowing single-cycle execution of most instructions. The integrated peripherals (op amps, DAC, ADC) are configurable via peripheral pin select (PPS), enabling flexible PCB routing. Core-independent peripherals (CIPs) such as the Complementary Waveform Generator (CWG) and Configurable Logic Cell (CLC) offload tasks from the CPU for deterministic timing. Typical applications include LED lighting control, motor drive, switch-mode power supply (SMPS) control, battery charging management, and consumer appliance control. The high-current I/Os directly drive LEDs or relays without external drivers, while the integrated op amps condition sensor signals before ADC conversion. When designing with this device, ensure the operating voltage (1.8V-5.5V for the LF variant) and temperature grade (-40C to +125C for E suffix) match your application. Use Microchip's MPLAB X IDE with XC8 compiler for firmware development and consider the PICkit programmer for in-circuit programming and debugging. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from Microchip's PIC16 family, and practical design considerations not found in the standalone datasheet, providing a single engineering-decision reference.

RFQ צור קשר
PIC16F1769-I/ML - 8-Bit MCU, 14KB Flash, 20-QFN | Microchip
PIC16F1769-I/ML

PIC16F1769-I/ML - 8-Bit MCU, 14KB Flash, 20-QFN | Microchip

The Microchip Technology PIC16F1769-I/ML is an 8-bit Flash microcontroller from the PIC16(L)F176X family, featuring 14 KB of Flash program memory, 1 KB of RAM, and a 32 MHz internal oscillator, housed in a 20-pin QFN (4x4 mm) package with industrial temperature grade (-40C to +85C). It combines intelligent analog integration with digital peripherals, including a 10-bit A/D converter, op amps, zero-cross detect, high-current I/Os, programmable ramp generators, and a 10-bit DAC. A PIC microcontroller (Programmable Interface Controller) is a compact, low-cost, RISC-based 8-bit MCU family from Microchip Technology that integrates a CPU, Flash memory, RAM, EEPROM, and a rich set of peripherals (ADC, PWM, timers, communication ports) into a single chip. PIC MCUs sit within the broader category of microcontrollers -> microprocessors -> semiconductor ICs -> embedded computing devices, and are widely used in deterministic, low-power, and cost-sensitive embedded control. Key features of the PIC16F1769-I/ML include CIP (Core Independent Peripherals) such as the 10-bit DAC with output steering, complementary output generator (COG), numerically controlled oscillator (NCO), configurable logic cells (CLC), zero-cross detect (ZCD), and op amps. The 20-pin QFN package and wide operating voltage (typically 1.8V-3.6V for the LF variant) make it suitable for space-constrained analog-rich designs. The architecture uses Microchip's enhanced mid-range 16-bit instruction word with 8-bit data path, providing deterministic interrupt latency and code density. The XLP (eXtreme Low Power) feature set enables sleep currents in the nanoamp range, supporting battery-powered applications. Typical applications include LED lighting control with smooth dimming, AC zero-cross dimmer circuits, closed-loop sensor conditioning, small motor control via complementary outputs, and IoT edge nodes requiring on-chip signal conditioning. When designing with this part, note that the QFN-20 (4x4) package has an exposed thermal pad that must be soldered to the PCB ground pour for proper thermal and electrical performance. Use MPLAB X IDE and XC8 compiler for firmware development, and Microchip's PICkit or MPLAB SNAP programmer for in-circuit debugging. This page synthesizes distributor pricing, drop-in same-package alternatives, application-focused design notes, and FAQs that go beyond the manufacturer datasheet. It targets engineers and buyers looking for an 8-bit MCU with intelligent analog and the compact 4x4 mm QFN footprint.

RFQ צור קשר
PIC16F1769-I/P - 32MHz 8-Bit MCU with 10-Bit DAC | Microchip
PIC16F1769-I/P

PIC16F1769-I/P - 32MHz 8-Bit MCU with 10-Bit DAC | Microchip

The Microchip Technology PIC16F1769-I/P is an 8-bit PIC microcontroller with a 32 MHz operating speed, 14 KB of Flash program memory, 1 KB of RAM, and a 10-bit DAC, housed in a 20-pin through-hole DIP package. Its combination of digital peripherals and intelligent analog integration makes it suitable for compact embedded control, sensor acquisition, signal generation, and power-conversion control designs. A microcontroller is a programmable integrated circuit that combines a CPU, memory, and peripherals on one semiconductor. Within the embedded-control hierarchy, the PIC16F1769 belongs to the 8-bit Flash MCU family and provides a low-complexity alternative to more resource-intensive processors. Its peripheral architecture reduces the need for separate analog and interface components while keeping firmware development accessible for industrial controls, instrumentation, and embedded products. The PIC16F1769-I/P provides 14 KB of Flash memory, equivalent to 8K words of program storage, together with 1 KB of RAM for working data. The 32 MHz instruction-clock rate supports responsive control tasks, while the integrated 10-bit DAC provides a dedicated digital-to-analog conversion function. Intelligent analog integration and digital peripherals broaden the range of sensor-reading, waveform-control, and closed-loop applications that can be implemented on one device. The industrial-temperature suffix I identifies the specified operating grade, while the P suffix denotes the 20-pin DIP package. This through-hole format supports prototyping, educational platforms, industrial controllers, and repair or upgrade assemblies where socketed components and straightforward routing are preferred. The 20-pin package also provides the conventional lead spacing and pin arrangement associated with the PIC16(L)F176X family. Typical uses include digital thermometers, potentiometer and resistive-sensor interfaces, motor or valve supervisory controls, compact power supplies, analog process monitoring, and low-cost test fixtures. For each application, the 10-bit DAC can create an analog reference or control signal, while the 8-bit CPU executes acquisition, filtering, and supervisory logic. Designers should confirm the exact peripheral assignments, voltage limits, clock configuration, and pin multiplexing in the manufacturer datasheet before finalizing a board. The main design consideration is careful budgeting of the 1 KB RAM and 14 KB program-memory footprint. Keep stack depth, buffers, and application state bounded, and place decoupling close to the supply pins. Because this is a mixed analog and digital MCU, define a clear grounding strategy and route sensitive sensor inputs away from high-current switching paths. This page combines manufacturer information, verified distributor facts, drop-in family alternatives, and practical selection guidance to support initial engineering evaluation.

RFQ צור קשר
PIC16F1769-I/SO - 8-Bit MCU, 14KB Flash, 32MHz, SOIC-20 | Microchip
PIC16F1769-I/SO

PIC16F1769-I/SO - 8-Bit MCU, 14KB Flash, 32MHz, SOIC-20 | Microchip

The Microchip Technology PIC16F1769-I/SO is an 8-bit PIC microcontroller from the PIC16(L)F176X family, featuring 14KB (8K x 14 words) of Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 20-pin SOIC package. According to the manufacturer datasheet, this device operates from 2.3V to 5.5V and integrates intelligent analog peripherals including 10-bit ADC, 10-bit DAC, operational amplifiers, zero-cross detect, and high-current I/O pins, making it well suited to mixed-signal control applications. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control in cost- and power-sensitive designs. PIC16F1769 sits within the PIC16 mid-range family, which falls under the broader category of microcontrollers -> embedded processors -> digital ICs -> semiconductors. Synonymous terms for this product type include 8-bit MCU, Flash microcontroller, and embedded controller. The 8-bit core architecture (Harvard RISC) executes most instructions in a single clock cycle, delivering predictable timing for closed-loop control loops. Key specifications include 32MHz maximum CPU clock (8MHz instruction rate with 4:1 divider), 14KB Flash self-programmable memory, 1KB RAM data memory, 256 bytes EEPROM, and configurable high-current sink/source I/O capable of directly driving LEDs and small relays. The device integrates two op amps, two 10-bit DACs, two 10-bit ADCs with up to 17 channels, and a zero-cross detect (ZCD) module that simplifies TRIAC-based AC load control without optocouplers. The PIC16F1769 uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiplier-free fast arithmetic, supported by C-friendly peripherals. Core-independent peripherals (CIPs) such as the Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), and Complementary Waveform Generator (CWG) allow timing-critical functions to run without CPU intervention, reducing power consumption and code complexity. Typical applications include LED lighting drivers and dimmers using the CWG and ZCD, BLDC fan control, battery chargers, low-cost motor control, sensor signal conditioning with on-chip op amps, and AC line-powered TRIAC control. The wide 2.3V-5.5V supply range and XLP extreme-low-power features also support battery-powered IoT sensor nodes. When designing with the PIC16F1769, ensure VDD decoupling with 100nF + 1uF caps close to the supply pin, route the ICSP clock and data lines away from switching nodes, and reserve the ZCD pin placement for AC line interfaces that demand safety spacing. Use Microchip's MPLAB X IDE with XC8 compiler for development; the device is supported by SEGGER J-Link and PICkit programmers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer product page, with all specifications cross-referenced against the Microchip PIC16F1769 datasheet and DigiKey/Mouser listing data as of 2026-09-20.

RFQ צור קשר