מיקרו-בקרים

מוצרים (19,000+)

STM32L011K4T6 - 32MHz, 16KB Flash MCU | STMicroelectronics
STM32L011K4T6

STM32L011K4T6 - 32MHz, 16KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L011K4T6 is a 32-bit ultra-low-power microcontroller with a 32 MHz Arm Cortex-M0+ processor, 16 KB of Flash memory, and a 32-LQFP package measuring 7 mm by 7 mm. Designed for energy-sensitive embedded systems, it combines basic control performance, compact dimensions, and low-power operation in one device. The STM32L011K4 family provides reset and supply-management features for embedded products requiring economical, space-constrained control. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The STM32L011K4 belongs to the STM32L0 access-line hierarchy: microcontroller, 32-bit microcontroller, Arm Cortex-M0+ microcontroller, and ultra-low-power embedded controller. It is suitable when a product needs more processing capability than a basic logic device but does not require the memory or peripheral set of a higher-end MCU. Verified source data identifies three headline characteristics: a 32 MHz operating frequency, 16 KB of Flash memory, and a 32-LQFP 7 mm by 7 mm package. The Cortex-M0+ core provides a 32-bit RISC architecture for firmware control, while the integrated Flash permits resident application code. The supplied product result also identifies the MCU as an STM32L0-series device with ultra-low-power positioning. The STM32L011K4T6 is appropriate for compact embedded controllers that collect simple sensor inputs, manage digital outputs, or execute low-bandwidth control functions. Its 16 KB Flash capacity should be checked against application code, bootloader, and update requirements before design release. Peripheral assignments, electrical limits, clock configurations, memory details, and package pin functions require confirmation from the manufacturer datasheet before PCB release. Typical application directions include low-power sensor nodes, compact industrial control modules, building automation endpoints, battery-operated instruments, and small motor or actuator-control products. The STM32L0 positioning can help reduce overall system size when a full-featured MCU is unnecessary. Nevertheless, firmware designers should verify analog, timing, communication, and low-power requirements against the exact device variant. A key design consideration is package and firmware validation. The 32-LQFP footprint provides exposed peripheral routing and is suitable for conventional multilayer or two-layer assemblies, but every unused pin and power connection must follow the official pinout. Before purchasing, compare the exact MPN, package, memory configuration, temperature grade, and lifecycle status with the current manufacturer and distributor records.

RFQ צור קשר
STM32L021D4P7 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L021D4P7

STM32L021D4P7 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L021D4P7 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz. It is part of the STM32L0 series, designed for battery-powered and energy-harvesting applications where power efficiency is critical. The device integrates 16 KB of Flash memory and 512 bytes of EEPROM, along with 8 KB of SRAM, in a compact 14-pin TSSOP package. An ultra-low-power microcontroller (MCU) is a system-on-chip that combines a processor core, memory, and peripherals on a single integrated circuit, optimized for minimal energy consumption. The STM32L0 family sits within the broader hierarchy of microcontrollers, which are a type of embedded processor used in everything from consumer electronics to industrial control. The Cortex-M0+ core is a 32-bit RISC processor designed for low-power and cost-sensitive applications, offering a balance of performance and efficiency. Key features include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop, Standby), a 12-bit ADC with hardware oversampling, ultra-low-power comparators, and a real-time clock (RTC) with calendar. The device supports a wide supply voltage range from 1.65V to 3.6V, making it suitable for single-cell battery operation. It also includes a rich set of communication interfaces, including I2C, SPI, and USART, enabling flexible connectivity. The STM32L021D4P7 is built on ST's ultra-low-leakage process technology, achieving typical current consumption of 0.29 µA in Standby mode with RTC, and 3.4 µA in Stop mode. This makes it ideal for applications that spend most of their time in sleep mode, waking periodically to perform tasks. The device also features a unique 96-bit ID, which can be used for security and traceability. Typical applications include wearable devices, smart sensors, medical monitoring devices, and industrial IoT nodes. Its low power consumption and small footprint make it perfect for space-constrained designs. For example, in a smart sensor node, the MCU can wake up every few seconds to read a sensor, process the data, and transmit it wirelessly, then return to sleep, extending battery life to years. When designing with this device, pay attention to the power supply decoupling and the selection of the appropriate low-power mode for your application. The STM32L0 series offers a comprehensive set of development tools, including the STM32CubeMX configuration tool and the STM32CubeL0 firmware library, which accelerate development and reduce time-to-market.

RFQ צור קשר
STM32L021K4T6 - 32MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
STM32L021K4T6

STM32L021K4T6 - 32MHz 16KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM32L021K4T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 16 KB of Flash memory, 2 KB of SRAM, and AES hardware encryption capability. It is supplied in a 32-LQFP 7 mm × 7 mm package for compact embedded-control and low-power designs. The STM32L0 series is positioned as an access-line family focused on energy efficiency, compact integration, and cost-conscious embedded processing. An ultra-low-power microcontroller is designed to minimize energy consumption while maintaining responsive control, measurement, communications, and security functions. The STM32L021K4T6 belongs to the STM32L0 family, combines a RISC-based Cortex-M0+ core with embedded Flash, SRAM, analog and digital peripherals, and is intended for systems where low standby current and active processing efficiency are important. Key verified attributes include a 32 MHz maximum clock, 16 KB Flash, 2 KB SRAM, a 12-bit ADC, 512 bytes of EEPROM according to the indexed datasheet result, AES support, and a 32-LQFP package. These resources support compact sensor nodes, low-power measurement equipment, simple security-enabled controls, and general embedded products that do not require the memory or processing capacity of a higher-end STM32 device. The Cortex-M0+ architecture provides a 32-bit instruction set while maintaining a small, energy-conscious design footprint. The STM32L0 family’s reset and supply-management functions help support reliable startup and low-power operation. Designers should verify exact peripheral availability, pin multiplexing, voltage limits, clock settings, and current consumption against the manufacturer datasheet for the selected orderable variant. Typical applications include battery-powered sensors, compact industrial controllers, low-power measurement instruments, secure embedded gateways, portable accessories, and small consumer devices. The 32-LQFP 7 mm × 7 mm package supports conventional surface-mount assembly and provides a practical option for designs that need more exposed pins than a small leadless package provides. The main design consideration is selecting firmware and peripherals around the verified 16 KB Flash and 2 KB SRAM limits. Developers should reserve memory for the bootloader, application code, stack, data, and upgrade requirements, and should confirm the exact pin functions needed by the PCB before layout. This page combines verified manufacturer and distributor information with practical selection guidance and explicitly identifies parameters that still require datasheet confirmation.

RFQ צור קשר
STM32L031C4T6 - 32MHz Arm Cortex-M0+ MCU | STMicroelectronics
STM32L031C4T6

STM32L031C4T6 - 32MHz Arm Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32L031C4T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 16 KB of Flash memory and a 48-LQFP 7 x 7 mm package. The STM32L0 access-line device combines a compact general-purpose MCU with embedded peripherals for low-power sensing, control, communication, and monitoring systems. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working data memory, and peripherals into one device. The STM32L031C4T6 belongs to the STM32L0 family, whose Arm Cortex-M0+ architecture supports efficient control workloads while emphasizing low power consumption. Its 48-LQFP package provides 38 I/O positions according to the verified distributor listing, allowing external sensors, communications, and actuators to be connected without relying on a large fine-pitch package. Verified headline specifications include a 32 MHz CPU frequency, 16 KB of Flash organized as 16K x 8, 32-bit architecture, and a 48-LQFP package. STMicroelectronics describes the STM32L031x4/6 family as an access line of ultra-low-power MCUs. The part is suitable for designs where a compact controller, low-power operation, and a conventional through-hole-style leaded package are more important than maximum memory density or a high-pin-count surface-mount footprint. Technical suitability depends on the exact peripheral mix, RAM capacity, voltage range, clock configuration, and low-power figures associated with the selected orderable variant. Those values were not included in the supplied verified data, so they are not inferred here. Designers should use the official STM32L031C4 product page and manufacturer datasheet for definitive pin functions, electrical limits, memory details, and peripheral availability before schematic capture. Typical applications include compact environmental sensors, industrial condition-monitoring nodes, low-power remote controls, building and access equipment, small battery-operated instruments, and communication peripherals. The 48-LQFP format can simplify prototyping and manual rework compared with very fine-pitch packages, while the Cortex-M0+ ecosystem supports mainstream embedded C development and established debugging workflows. Designers should confirm every assigned 48-LQFP pin against the official pinout, especially for SWD programming, clocks, reset, and power pins. PCB planning should also provide clean grounding, accessible test points, and decoupling close to the device. Because the supplied search results do not expose detailed application-note schematics, this page avoids presenting unverified reference-circuit values. This page combines verified manufacturer and distributor data, same-package replacement guidance, practical integration considerations, and structured procurement information. It adds engineering context beyond a basic distributor listing while clearly separating confirmed facts from parameters that still require datasheet confirmation.

RFQ צור קשר
STM32L031C6T6 - 32MHz Ultra-Low-Power MCU | STMicroelectronics
STM32L031C6T6

STM32L031C6T6 - 32MHz Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM32L031C6T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 32 KB of Flash memory in a 48-pin LQFP 7 x 7 mm package. It belongs to the STM32L0 access-line family and combines compact code and data storage with low-power-oriented embedded control. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as GPIO, timers, serial interfaces, and analog blocks. Within the hierarchy, the STM32L031C6T6 is an embedded microcontroller, a semiconductor, and a member of STMicroelectronics’ STM32 family. Its Arm Cortex-M0+ core provides a 32-bit RISC architecture suited to compact control, sensing, and communication tasks. Key verified features include a 32 MHz operating frequency, 32 KB Flash memory, and a 48-LQFP package. The verified distributor records also identify the STM32L0 series as an access-line ultra-low-power family. The 32 KB Flash capacity is useful for compact firmware that does not require the storage of a larger application, while the 48-pin package provides a substantial lead-count for external connections and mixed-signal or communication peripherals. The STM32L031C6T6 is positioned for low-power embedded systems where the Cortex-M0+ ecosystem, compact package, and 32 MHz processing capability are more important than high-end connectivity or large memory capacity. Its 3.3 V class supply description is reflected in distributor listings, although exact electrical limits, current consumption, peripheral inventory, temperature limits, and package dimensions must be confirmed against the manufacturer datasheet before design release. Typical applications include low-power sensor nodes, compact industrial controllers, battery-operated instruments, IoT edge devices, and small motor or actuator control boards. In a sensor node, the MCU can acquire measurements, filter data, and transmit results through a serial interface. In an industrial controller, its GPIO and timer resources can coordinate inputs, indicators, and actuators while maintaining a compact board footprint. The principal design consideration is firmware and peripheral planning. Engineers should verify the exact pin multiplexing, alternate functions, debug access, clock configuration, and low-power modes in the STM32L031C6 datasheet before assigning the 48 LQFP leads. This page combines verified distributor information, manufacturer product data, and practical sourcing guidance; it does not infer missing electrical specifications.

RFQ צור קשר
STM32L031F4P3 - 32MHz, 16KB Flash MCU | STMicroelectronics
STM32L031F4P3

STM32L031F4P3 - 32MHz, 16KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L031F4P3 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz CPU, 16 KB Flash, and a 20-pin TSSOP package. The verified listing identifies it as an STM32L0-series MCU with 16K x 8 Flash memory and a 3 V supply. These core attributes make it suitable for compact embedded products that need efficient control, low standby power, and modest program-memory capacity. A microcontroller such as the STM32L031F4P3 integrates a CPU core, Flash program memory, SRAM, peripheral interfaces, clock circuitry, and power-management functions on one semiconductor device. In the broader hierarchy, it is an embedded microcontroller, part of the ARM Cortex-M family, and specifically an STM32L0 ultra-low-power MCU. The Cortex-M0+ architecture is designed for cost-sensitive, compact embedded control rather than high-performance computing. Verified product information confirms a 32-bit Cortex-M0+ core, 32 MHz maximum CPU frequency, and 16 KB Flash memory. The 20-TSSOP package keeps the lead count manageable for space-constrained boards while supporting automated assembly. A 3 V operating supply is identified in the distributor result, while detailed electrical limits, SRAM capacity, GPIO count, timer resources, ADC specifications, and current consumption were not supplied in the verified data and require confirmation from the manufacturer datasheet. Typical design uses include battery-powered sensor nodes, compact industrial controllers, low-power monitoring equipment, simple actuator controllers, and embedded accessory boards. The MCU can execute firmware from its internal Flash and coordinate inputs and outputs through its integrated peripherals. Because peripheral assignments, alternate functions, and electrical characteristics are not included in the supplied records, final PCB and firmware decisions should be based on the STM32L031F4 datasheet and its pin, timing, and power-information sections. For PCB implementation, preserve the package footprint and pin numbering of the 20-pin TSSOP, route decoupling close to the supply pins, and validate signal levels against the confirmed operating-voltage range. Firmware development should account for the STM32L0 peripheral architecture and low-power modes. This page consolidates the verified distributor and manufacturer information while distinguishing confirmed facts from specifications that still require datasheet verification.

RFQ צור קשר
STM32L031F4P6 - 32MHz Cortex-M0+ 16KB MCU | STMicroelectronics
STM32L031F4P6

STM32L031F4P6 - 32MHz Cortex-M0+ 16KB MCU | STMicroelectronics

STMicroelectronics STM32L031F4P6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core operating at 32 MHz, 16 KB of Flash memory, and 8 KB of SRAM in a 20-pin TSSOP package. It belongs to the STM32L0 access-line family of low-power microcontrollers for compact, cost-sensitive embedded systems. The STM32L031F4P6 combines a 32 MHz Arm Cortex-M0+ processor with 16K x 8 Flash organization in a surface-mount TSSOP-20 package, making it suitable for small control systems, sensor nodes, portable instruments, and low-power consumer equipment. The supplied distributor data identifies a 16 KB Flash configuration, while detailed operating-voltage, timer, peripheral, and power-consumption values were not included and therefore require confirmation from the manufacturer documentation before design release. The 32-bit Cortex-M0+ architecture provides a compact software execution platform while retaining a familiar peripheral ecosystem. Its 32 MHz maximum operating frequency supports responsive control loops and interrupt-driven embedded workloads without requiring a larger package. The STM32L031F4P6 uses 16 KB of Flash for firmware and 8 KB of SRAM for working memory, a balanced allocation for compact applications with limited code and data requirements. A 20-pin TSSOP package supports prototype assembly, automated inspection, and space-constrained PCB layouts. The manufacturer describes the STM32L031x4/6 family as an access-line ultra-low-power MCU family based on the Arm Cortex-M0+ core. The STM32L031F4P6 is offered through major distributors and the ST online store, with the listed LCSC starting price of $2.0439 as of 2026-10-29. Applications include low-power sensor conditioning, compact industrial controllers, battery-operated accessories, appliance control, and wearable-adjacent health or monitoring products. Because the verified data does not include the complete electrical table or pin assignment, engineers should verify supply voltage, GPIO ratings, clock configuration, temperature limits, and pin multiplexing against the current STMicroelectronics product documentation. The STM32L031F4P6 is best suited to projects that prioritize low cost, compact size, a 32 MHz Cortex-M0+ core, and 16 KB Flash in an industry-standard TSSOP-20 footprint. This page separates confirmed distributor facts from parameters that still require datasheet verification, helping engineering teams make an evidence-based procurement and design decision.

RFQ צור קשר
STM32L031F6P6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L031F6P6

STM32L031F6P6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L031F6P6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz. It features 32 KB of Flash memory and 8 KB of SRAM, packaged in a 20-pin TSSOP (P6) package. This device is part of the STM32L0 series, designed for applications requiring low power consumption and high integration. What is an ARM Cortex-M0+ microcontroller? It is a 32-bit processor core designed for low-cost and low-power embedded applications. The Cortex-M0+ is the smallest and most energy-efficient ARM processor, offering a balance of performance and power consumption. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, serving as the 'brain' of embedded systems. The STM32L0 series specifically targets battery-powered and energy-harvesting applications where every microamp of current matters. Key features of the STM32L031F6P6 include multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop with RTC, Standby with RTC), a 12-bit ADC with hardware oversampling, a low-power UART, I2C, SPI interfaces, and a real-time clock (RTC) with calendar. The device operates from 1.8V to 3.6V supply, with a typical current consumption of 87 uA/MHz in Run mode and 0.29 uA in Standby mode with RTC. It also includes a unique device ID, CRC calculation unit, and a true random number generator (RNG) for security applications. Technically, the STM32L031F6P6 is built on ST's ultra-low-power technology, featuring a flexible clock management with an internal 16 MHz RC oscillator, an external 32.768 kHz crystal for RTC, and a phase-locked loop (PLL) for higher frequencies. The device supports a wide temperature range from -40°C to +85°C, making it suitable for industrial and consumer applications. The TSSOP-20 package offers a compact footprint of 6.4mm x 4.4mm, ideal for space-constrained designs. Typical applications include portable medical devices, sensor nodes for IoT, smart home controllers, battery management systems, and industrial monitoring equipment. The ultra-low-power modes enable long battery life, while the rich analog and digital peripherals allow for versatile system integration. For example, in a wireless sensor node, the STM32L031F6P6 can wake up periodically, read sensors, process data, and transmit via a low-power radio, all while consuming minimal energy. When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 uF capacitor on the main supply. Also, configure the clock system properly to balance performance and power consumption. The STM32L0 series is supported by ST's comprehensive ecosystem, including the STM32CubeMX configuration tool and the HAL library, which accelerate development.

RFQ צור קשר
STM32L031G6U7 - 32MHz Cortex-M0+ MCU | STMicroelectronics
STM32L031G6U7

STM32L031G6U7 - 32MHz Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L031G6U7 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 32 KB of Flash memory and 8 KB of SRAM in a 28-pin UFQFPN 4 x 4 mm package. The device provides 21 I/O pins and supports I2C, SPI, UART/USART, ADC, PWM, LIN, and other embedded-control resources, making it suitable for compact industrial, sensor, motor-control, and connected-node designs. An ultra-low-power microcontroller is a semiconductor device optimized to execute control logic while minimizing energy consumed during idle, sleep, and low-activity operating states. The STM32L031 belongs to the STM32L0 access-line hierarchy: Arm Cortex-M0+ microcontroller, 32-bit embedded MCU, and low-power MCU for battery-operated and always-connected systems. Its compact package supports space-constrained assemblies without requiring a larger leaded or high-pin-count footprint. Key verified features include a 32-bit Arm Cortex-M0+ core operating at 32 MHz, 32 KB of Flash, and 8 KB of SRAM. The available interface set includes I2C, SPI, UART/USART, ADC, PWM, and LIN, while the Octopart comparison data identifies 21 I/O pins. These resources are balanced for low-cost control nodes that need multiple serial interfaces, mixed signal acquisition, and precise timing without the memory or processing demand of a higher-end MCU. The STM32L031 architecture combines a 32-bit RISC core with an integrated peripheral set intended for embedded control. Firmware can use serial connectivity for sensors and actuators, ADC channels for analog measurements, timers for PWM generation, and LIN for distributed vehicle or industrial nodes. Exact electrical limits, memory-map details, clock-tree settings, and peripheral operating characteristics should be confirmed against the official STM32L031G6 datasheet before a production design is released. Typical uses include compact sensor nodes, industrial condition-monitoring equipment, small motor-control loops, LIN-connected control modules, and low-power IoT peripherals. The 28-pin UFQFPN package also suits boards where component area is constrained but enough parallel and serial I/O is needed. The 32 MHz Cortex-M0+ core provides additional timing headroom compared with slower entry-level microcontrollers without moving to a more complex high-end device family. Designers should allocate decoupling capacitors, route sensitive analog and communication signals away from switching nodes, and validate the exposed-pad thermal path on the PCB. Firmware and peripheral assignments must also be reviewed against the exact UFQFPN pin map and package variant. A replacement is not automatically production-equivalent merely because it uses a 28-pin UFQFPN package; memory capacity, temperature grade, peripheral availability, and electrical ratings must be checked. This page consolidates verified manufacturer and distributor information, package and memory details, pricing observed as of 2026-10-30, same-brand drop-in candidates, and practical design guidance. It also distinguishes verified substitutions from general cross-reference tools, helping engineers evaluate PCB fit, firmware assumptions, and specification differences before committing a replacement to production.

RFQ צור קשר
STM32L031K6T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L031K6T6

STM32L031K6T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L031K6T6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz. It features 32 KB of Flash memory and 8 KB of SRAM, packaged in a 32-pin LQFP (TQFP32) with a 7x7 mm footprint. This device is part of the STM32L0 series, designed for battery-powered and energy-efficient applications. What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a system-on-chip that integrates a processor core, memory, and peripherals while minimizing energy consumption, often featuring multiple low-power modes such as sleep, stop, and standby. These devices are essential in the hierarchy of embedded systems, from simple 8-bit MCUs to complex application processors, where power efficiency is critical for extending battery life in portable and IoT devices. Key features include a 12-bit ADC with hardware oversampling, multiple communication interfaces (I2C, SPI, USART), and a rich set of timers including a low-power timer. The device supports a wide supply voltage range from 1.8V to 3.6V, with a typical operating current of 84 uA/MHz in Run mode and as low as 0.29 uA in Standby mode with RTC. The STM32L031K6T6 also integrates a true EEPROM emulation, a 12-bit DAC, and a comparator, making it versatile for analog sensing applications. Technically, the STM32L031K6T6 is built on a 110nm process, offering a balance between performance and power. The Cortex-M0+ core includes a single-cycle multiplier and a nested vectored interrupt controller (NVIC), enabling efficient interrupt handling. The device features a flexible clocking system with an internal 16 MHz RC oscillator, an external crystal oscillator, and a PLL, allowing designers to optimize for speed or power. Typical applications include portable medical devices, smart sensors, fitness trackers, and industrial monitoring systems. Its ultra-low-power modes and rich analog peripherals make it ideal for applications that require long battery life and precise analog measurements, such as wearable health monitors and environmental sensors. When designing with this device, pay attention to the power supply decoupling: place a 100nF capacitor close to each VDD pin and a 1uF capacitor on the main supply. For lowest power consumption, use the STOP mode with the RTC running, and configure unused GPIOs as analog inputs to avoid leakage currents.

RFQ צור קשר
STM32L031K6T7 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics
STM32L031K6T7

STM32L031K6T7 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics

The STMicroelectronics STM32L031K6T7 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M0+ core, operating at up to 32 MHz with 32 KB of Flash memory in a 32-LQFP 7 x 7 mm package. It is designed for compact embedded systems that require efficient control processing, low power consumption, and a broad operating-temperature range. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy use during active operation, sleep, and standby modes. The STM32L031K6 belongs to STMicroelectronics' access-line STM32L0 family. Its position in the hierarchy is microcontroller IC, embedded processor, microcontroller, and semiconductor. This makes it suitable for compact battery-powered sensing, industrial control, communications, and consumer equipment where a general-purpose processor would be unnecessarily large or power-hungry. Key features include a 32 MHz Arm Cortex-M0+ processor, 32 KB of Flash program memory, and 8 KB of SRAM. The verified product information also identifies a 12-bit ADC and an operating-temperature range of -40°C to +105°C. These specifications support firmware storage, real-time control tasks, analog signal acquisition, and industrial thermal requirements while keeping the device within the STM32L0 access-line portfolio. The 32-bit Cortex-M0+ architecture provides a compact instruction set and efficient execution for embedded workloads. With 32 KB of Flash, the MCU can hold boot code, application firmware, configuration data, and protocol handlers without requiring an external memory interface. Its 8 KB of SRAM provides working memory for control loops, communication buffers, and peripheral data handling, although developers should size memory carefully in highly concurrent applications. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact control panels, building automation endpoints, battery-operated instruments, and embedded communications controllers. The -40°C to +105°C range makes the device relevant to demanding industrial environments, while the 12-bit ADC supports analog inputs used in sensing and measurement designs. When designing around the STM32L031K6T7, verify every peripheral, alternate-function mapping, pin requirement, and software-driver dependency against the manufacturer documentation. Pay particular attention to startup configuration, clock limits, ADC acquisition requirements, and low-power mode transitions. PCB layout should preserve clean power distribution and appropriate decoupling around this 32-LQFP device. This product page consolidates verified manufacturer and distributor information, purchase context, technical comparison data, and practical design guidance. It distinguishes verified attributes from specifications requiring confirmation, helping engineers evaluate the STM32L031K6T7 without relying on generic microcontroller claims.

RFQ צור קשר
STM32L031K6U6 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics
STM32L031K6U6

STM32L031K6U6 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics

STMicroelectronics STM32L031K6U6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at 32 MHz, with 32 KB flash memory, in a 32-pin UFQFPN 5x5 mm package. It belongs to the STM32L0 access-line family and targets compact, energy-conscious embedded systems. The verified distributor listing identifies the device as a 32-bit, 32 MHz MCU with 32 KB flash and a 32-UFQFPN package. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one embedded-control platform. The STM32L031K6U6 combines an Arm Cortex-M0+ RISC core with low-power design goals, allowing firmware to control sensors, communications, timers, and analog or digital peripherals in compact products. The principal verified characteristics are a 32 MHz operating frequency, 32-bit architecture, 32 KB flash memory, and a compact 32-pin UFQFPN package. The Arm Cortex-M0+ core provides a straightforward instruction set for embedded applications, while the STM32L0 family positioning emphasizes low power consumption for battery-operated and resource-constrained equipment. The STM32L031K6 family is associated with the STMicroelectronics STM32L0 ultra-low-power portfolio. Typical embedded uses include low-power sensor nodes, compact control boards, portable instruments, simple communication equipment, and IoT devices where the combination of processing capability, memory, and package size is useful. Exact peripheral availability, electrical limits, memory-map details, and timing parameters should be confirmed in the manufacturer datasheet before final design release. Designers should preserve the package footprint, pin assignment, supported voltage range, decoupling requirements, clock configuration, and programming interface when creating a PCB. Because the supplied data does not include a full electrical table or complete pinout, unsupported values are marked as needed rather than inferred. This page combines verified distributor identification, manufacturer product information, practical application guidance, and sourcing context. This product summary distinguishes the STM32L031K6U6 from functionally related STM32 devices by emphasizing the verified combination of Cortex-M0+ architecture, 32 MHz operation, 32 KB flash, and 32-pin UFQFPN packaging. It is a useful starting point for embedded engineers evaluating low-power MCU designs and comparing package-compatible sourcing options.

RFQ צור קשר
STM32L041F6P7 - 32MHz Cortex-M0+ 32KB Flash MCU with AES | STMicroelectronics
STM32L041F6P7

STM32L041F6P7 - 32MHz Cortex-M0+ 32KB Flash MCU with AES | STMicroelectronics

The STMicroelectronics STM32L041F6P7 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with 32 KB of Flash memory, 8 KB of SRAM, a 32 MHz CPU and a hardware AES accelerator, packaged in a 20-pin TSSOP (0.173 inch / 4.40 mm body width) surface-mount package. The STM32L041F6 access-line family targets cost-sensitive, battery-operated embedded designs where low active and standby current matter more than raw processing throughput. A microcontroller (MCU) is a self-contained embedded processing unit: a CPU core, program Flash, data SRAM, and a set of on-chip peripherals such as timers, serial interfaces, ADCs and GPIO, all integrated on a single die. The STM32L041F6 belongs to the STM32L0 access line, the entry tier of the STM32 family, and its Arm Cortex-M0+ core is the smallest and most energy-efficient member of the Cortex-M architecture, sitting at the bottom of the hierarchy MCU > microcontroller > embedded processor > semiconductor. Key features include the 32 MHz Cortex-M0+ core with its single-cycle multiplier and divider, 32 KB of Flash (32K x 8) alongside 8 KB of SRAM, an on-chip hardware AES accelerator for encrypted data links, and a small 20-TSSOP outline that keeps boards compact. The part is listed as Active in the lifecycle, is ROHS3 compliant, ships in a tray package, and carries a stated lead time of 17 weeks as of the October 2026 distributor data. Technologically, the STM32L041F6 is built around the ultra-low-power Arm Cortex-M0+ core with a 32 MHz maximum clock and a simple, deterministic peripheral set oriented around low-power operation. The 32 KB of Flash holds the application code and the 8 KB of SRAM serves as the working data space, which is adequate for small control loops, sensor fusion and low-rate communications. The AES block offloads encryption from the CPU, freeing the core for acquisition and protocol handling in secure metering and connected-sensor designs. Typical applications include low-cost IoT sensor nodes, smart water and gas meters, battery-powered wearables and trackers, industrial monitoring modules, compact keypads, and small motor or relay control boards where the 20-pin footprint and low standby current are decisive. When designing around this device, keep the decoupling network tight: place a 100 nF ceramic capacitor at each VDD pin and a 4.7 uF bulk capacitor close to the supply pins, and verify that your PCB footprint matches the 0.65 mm pitch 20-pin TSSOP. Because only 20 pins are available, budget carefully for analog inputs and serial lines, and confirm that the peripheral mix of your chosen variant matches your design. This page consolidates distributor pricing, lifecycle status and lead time as of 2026-10-28, a parameter-by-parameter comparison against pin-compatible STM32L0 alternatives, and practical design notes that are not found on the distributor product pages themselves.

RFQ צור קשר
STM32L051C6T6 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics
STM32L051C6T6

STM32L051C6T6 - 32MHz Cortex-M0+ 32KB MCU | STMicroelectronics

The STMicroelectronics STM32L051C6T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller rated at 32 MHz, with 32 KB of Flash memory and 8 KB of RAM, housed in a 48-pin LQFP package. It belongs to STMicroelectronics’ STM32L0 access-line family and combines a compact general-purpose controller with energy-saving modes for embedded designs. A microcontroller is a programmable semiconductor system that integrates a CPU core, memory, I/O, and peripherals on one device. In the STM32 hierarchy, this MCU belongs to the STM32 family, the STM32L0 series, and the Arm Cortex-M0+ embedded-processing class. That architecture supports compact control firmware while separating larger tasks from low-power sensing or monitoring functions. The verified product information identifies a 32-bit Arm Cortex-M0+ core, 32 MHz operating frequency, 32 KB Flash, and an LQFP package measuring 7 mm by 7 mm. Distributor records also identify this orderable variant as a 48-pin tray-packaged device. The STM32L051x6/8 family description additionally lists embedded memory protection, enhanced I/O, and low-power capabilities, although individual peripheral values are not present in the supplied verification data. Ultra-low-power MCU architecture is particularly useful where average energy consumption matters more than maximum processing throughput. A device such as the STM32L051C6T6 can serve as the central controller for a battery-powered sensor node, industrial monitoring module, or connected actuator controller. Its 32 MHz Cortex-M0+ core provides a straightforward Arm software target, while 32 KB Flash constrains firmware and boot-code capacity compared with higher-memory STM32 devices. Potential uses include compact environmental sensors, low-power condition-monitoring nodes, appliance controls, meter interfaces, actuator controls, and embedded accessories that periodically wake a controller to acquire or process data. The 48-LQFP package also exposes more I/O than small dual in-line packages, but it requires a larger PCB footprint and careful assembly planning. Design planning should begin with the manufacturer’s pinout, memory map, and electrical limits. Do not infer unavailable GPIO, timer, analog, communication, voltage, current, or temperature specifications from family-level descriptions. Confirm that 32 KB of Flash is sufficient for the final bootloader and application, and review the exact peripheral mapping for each 48-pin board design. This product page combines verified manufacturer specifications, distributor availability, sourcing details, and application guidance. It also distinguishes exact drop-in alternatives from broader functional substitutes, helping engineers make PCB-level decisions without treating different Cortex-M devices as interchangeable.

RFQ צור קשר
STM32L051C8T3 - 32MHz Cortex-M0+ 64KB Flash MCU | STMicroelectronics
STM32L051C8T3

STM32L051C8T3 - 32MHz Cortex-M0+ 64KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L051C8T3 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller in the STM32L0 access line, delivering 32 MHz CPU performance with 64 KB of Flash and 8 KB of SRAM in a 48-pin LQFP (7x7 mm) package. Operating from a 1.65 V to 3.6 V supply, it targets battery-powered and energy-harvesting designs where every microamp matters. An ultra-low-power microcontroller (MCU) is a class of embedded processor that combines a CPU core, on-chip memory, and a rich peripheral set with deep-sleep modes drawing only nanoamps to microwatts of quiescent current. The STM32L0 family sits inside the broader hierarchy of Cortex-M microcontrollers -> 32-bit MCUs -> microcontrollers -> microprocessors -> semiconductors, and ST positions the STM32L0 access line as the entry point for ultra-low-power embedded designs. Key features include 64 KB single-bank Flash, 8 KB SRAM, an 8-channel 12-bit ADC reaching 1 Msps, two ultra-low-power comparators, a real-time clock (RTC) with calendar, multiple timers (16-bit, 32-bit, SysTick), and seven communication interfaces including USART, SPI, and I2C. The integrated LDO + step-down DC-DC regulator combination on selected SKUs minimizes active and standby current while supporting flexible power modes. Architecturally, the Cortex-M0+ core pairs with ST's proprietary ultra-low-power peripherals (ULP) including low-power timers, brown-out reset, and multiple low-power run/sleep/shutdown modes. The dual-voltage operation and integrated DC-DC converter (on related STM32L0x2/x3 variants) deliver MCU run currents typically below 100 uA/MHz and standby currents in the sub-microamp range. Typical applications include IoT sensor nodes, wearable health monitors, smart meters, wireless remote controls, energy-harvesting devices, and battery-backed industrial alarms. Designers choose the STM32L051C8T3 specifically when they need deterministic Cortex-M0+ simplicity, generous Flash for an OTA-capable stack, and LQFP-48 hand-solderable packaging for prototyping or low-volume builds. When designing with this device, decouple both VDD and VDDA rails with 100 nF + 1 uF ceramics placed within 5 mm of the pins, and route the NRST line away from switching traces. The package's 7x7 mm LQFP-48 footprint is the industry-standard 0.5 mm pitch land pattern, simplifying PCB reuse across the STM32L0 family. This page synthesizes distributor pricing, drop-in alternatives within the STM32L0 family, and practical design notes not found in the manufacturer datasheet.

RFQ צור קשר
STM32L051C8T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L051C8T6

STM32L051C8T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STM32L051C8T6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M0+ core running at up to 32 MHz. It integrates 64 KB of Flash memory and 8 KB of SRAM, with a rich set of peripherals including a 12-bit ADC, comparators, timers, and multiple communication interfaces (I2C, SPI, USART). The device operates from a 1.8V to 3.6V supply and features several low-power modes, making it ideal for battery-powered and energy-harvesting applications. Data verified as of 2026-08-05. What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a type of embedded processor designed to minimize energy consumption while maintaining computational capability. It fits within the broader hierarchy: ARM Cortex-M0+ core -> 32-bit microcontroller -> embedded processor -> semiconductor. These devices are optimized for applications where battery life is critical, such as IoT sensors, wearables, and portable medical devices. The STM32L0 series specifically targets the low-power segment with multiple sleep modes and dynamic voltage scaling. Key features include a 12-bit ADC with hardware oversampling, a low-power UART, and a real-time clock (RTC) with calendar. The device supports a wide operating temperature range of -40°C to +85°C and is available in a 48-pin LQFP package. The STM32L051C8T6 also includes a unique device ID, CRC calculation unit, and a true random number generator (RNG) for security applications. Technically, the STM32L051C8T6 is built on ST's ultra-low-power technology, featuring a flexible clock tree with multiple internal/external oscillators. It supports a 1.8V to 3.6V power supply and has a typical current consumption of 3.4 µA in Stop mode with RTC, and 0.29 µA in Standby mode. The device also includes a brown-out reset (BOR) and power-on reset (POR) for reliable operation. Typical applications include IoT sensor nodes, smart home devices, portable medical monitors, and industrial sensor interfaces. Its low power consumption and rich analog peripherals make it suitable for battery-powered designs where long operational life is required. When designing with this MCU, pay attention to the power supply decoupling and the selection of the appropriate low-power mode for your application. Use the STM32CubeMX tool to configure the clock tree and peripherals efficiently. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32L051C8T6.

USD $0.98 צור קשר
STM32L051K6T6 - 32MHz 32KB Cortex-M0+ MCU | STMicroelectronics
STM32L051K6T6

STM32L051K6T6 - 32MHz 32KB Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051K6T6 is an ultra-low-power, 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 32 KB (32K x 8) of Flash memory and 25 I/O pins in a 32-LQFP (7x7) package. It belongs to STMicroelectronics' access-line STM32L0 family and is designed for compact, energy-sensitive embedded-control products. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and input/output interfaces into one device. In the product hierarchy, the STM32L051K6T6 is an MCU, a general-purpose integrated circuit used to execute firmware and supervise connected hardware. Its Arm Cortex-M0+ core provides a compact, energy-efficient architecture for control-oriented rather than high-compute workloads. The verified device data identifies a 32-bit operating architecture, a maximum stated frequency of 32 MHz, 32 KB of Flash, and a 32-LQFP package. Distributor listings also identify a 12-bit ADC and 25 I/O pins. These resources make the device suitable for low-power sensing, actuator control, simple communications, and embedded products where a larger Cortex-M3 or Cortex-M4 processor would add unnecessary cost, board area, or energy consumption. The STM32L051K6T6's 32 MHz Cortex-M0+ core is positioned for energy-conscious control applications, while its 32 KB Flash capacity supports firmware, configuration data, and boot logic on one device. Its LQFP construction provides visible leads for inspection and repair, unlike fine-pitch land-grid-array packages. Exact RAM capacity, peripheral timing, and detailed electrical limits should be confirmed in the manufacturer datasheet for the final design. Typical uses include battery-powered environmental sensors, compact industrial monitoring nodes, access-control peripherals, low-power motor-control modules, and connected instrumentation. A designer can use the ADC for analog measurements and the GPIO structure for switches, indicators, sensors, and actuators, subject to the complete pin and peripheral assignments in the datasheet. The most important design consideration is to verify every alternate-function assignment and operating condition against the STM32L051K6T6 datasheet before PCB release. The 32-LQFP footprint should be checked for pin clearance, thermal exposure, and assembly capability, while firmware should use only the peripherals and interrupt assignments supported by the exact orderable device. This product record consolidates verified manufacturer and distributor information, current purchasing references, package details, application guidance, and same-family drop-in alternatives. It also identifies information that requires confirmation from the full datasheet rather than estimating unspecified RAM, timing, temperature, or pin-function values.

RFQ צור קשר
STM32L051K8T6 - 32MHz Arm Cortex-M0+ MCU | STMicroelectronics
STM32L051K8T6

STM32L051K8T6 - 32MHz Arm Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L051K8T6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller operating at 32 MHz, with 64 KB of Flash memory and 8 KB of RAM in a 32-LQFP 7 x 7 mm package. It also provides 2 KB of data EEPROM, a 12-bit 10-channel ADC, and up to 27 GPIO for compact energy-sensitive embedded systems. An ultra-low-power microcontroller is an integrated computing device designed to perform control, measurement, and communications tasks while minimizing energy consumption between active processing periods. The STM32L051K8 belongs to the STM32L0 access-line hierarchy: microcontroller, embedded processor, Arm Cortex-M0+ MCU, and semiconductor. This positioning makes it suitable for small systems that need more processing capability than a simple logic device but value compactness, low power, and broad peripheral integration. Key features include 64 KB of Flash for firmware, 8 KB of SRAM for working data, and 2 KB of EEPROM for parameters that must retain their values without power. The device provides three general-purpose timers, one basic timer, one low-power timer, one SPI or I2S interface, one I2C interface, and two USART interfaces. Its 12-bit, 10-channel synchronized ADC supports embedded analog measurement, while as many as 27 GPIO allow direct connection of sensors, switches, displays, and actuators. The STM32L051K8T6 uses the high-performance 32 MHz Arm Cortex-M0+ core within the STM32L0 product family. Serial wire debug provides a compact programming and debugging connection, reducing the number of external pins and board area required during development. The part combines 32-bit processing, integrated analog conversion, timer-based control, and serial communications in one 32-LQFP package, reducing the component count of compact control boards. Typical applications include battery-powered sensor nodes, industrial condition-monitoring equipment, compact building-control modules, low-power data loggers, consumer accessories, and portable measurement instruments. Designers can use the ADC for analog inputs, timers for periodic sampling or PWM generation, and the I2C, SPI, and USART peripherals for sensors, memory, displays, or external communications modules. A key design consideration is power management. Engineers should use the device's low-power operating modes when the application spends substantial time idle, while confirming the required supply range, operating temperature, and peripheral clock configuration in the manufacturer documentation before releasing the PCB. This page also synthesizes verified distributor pricing, package details, alternatives, and practical implementation guidance for STM32L051K8T6 evaluation.

RFQ צור קשר
STM32L052K6T6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
STM32L052K6T6

STM32L052K6T6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L052K6T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller operating at up to 32 MHz, with 32 KB of Flash memory and USB 2.0 crystal-less connectivity in a 32-LQFP 7x7 mm package. It combines low-power embedded control with serial peripherals for connected industrial, IoT, sensor, and USB-powered products. A microcontroller is a semiconductor that integrates a processor core, programmable memory, digital I/O, and peripherals into one device. The STM32L0 family belongs to the ARM Cortex-M microcontroller hierarchy and targets embedded systems where compact size, efficient processing, and low standby or operating power are important. Its peripheral integration reduces the component count needed for communications, timing, analog measurement, and control. The verified product information identifies an ARM Cortex-M0+ core, 32 MHz operation, 32 KB Flash organized as 32K x 8, USB 2.0 crystal-less connectivity, and a 32-LQFP package. Distributor listings also identify I2C and SPI support, making the device relevant for sensor networks, USB-to-serial equipment, compact control boards, and low-power connected products. The exact SRAM, voltage range, temperature limits, and peripheral ratings were not supplied in the verified excerpts and therefore are not asserted here. The crystal-less USB feature is a practical differentiator for designs that need USB connectivity without relying on a dedicated external crystal for the specified USB implementation. Firmware must still satisfy the USB clocking, impedance, power, and enumeration requirements described by the manufacturer. The 32 MHz Cortex-M0+ core provides a responsive platform for control logic while retaining the STM32 family's low-power positioning. Typical applications include low-power IoT nodes, USB-connected sensors, industrial instrumentation, low-power control boards, compact data-acquisition products, and embedded automation modules. These uses benefit from the MCU's combination of USB, I2C, SPI, Flash, and a compact 32-LQFP footprint. The 7x7 mm package is easy to route on a reasonably dense PCB while preserving exposed assembly and inspection access. Designers should verify the complete pinout, alternate-function mapping, power requirements, decoupling recommendations, clocking scheme, and USB layout against the official STM32L052K6 datasheet before layout release. USB differential routing, ground-return continuity, input filtering, and exposed-pad thermal design are more important than simply matching the package outline. Firmware should also confirm peripheral mapping and low-power-mode timing rather than assuming that a lower-power alternative is automatically interchangeable. This page combines verified distributor and manufacturer listings with structured application, comparison, and design guidance. It is intended to help engineers identify the correct STM32L052K6T6 platform while separating confirmed data from parameters that still require direct datasheet confirmation.

RFQ צור קשר
STM32L052K6U6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
STM32L052K6U6

STM32L052K6U6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics

STMicroelectronics STM32L052K6U6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum clock, 32 KB flash memory, and USB 2.0 crystal-less connectivity in a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device is designed for energy-sensitive embedded systems that require compact control, serial connectivity, timers, and low power operation. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The STM32L0 series belongs to the ARM Cortex-M0+ class of embedded processors, combining a compact instruction set with broad peripheral integration. This product hierarchy places the STM32L052K6U6 within microcontrollers, embedded processors, and the broader semiconductor category. Key verified features include a 32-bit ARM Cortex-M0+ core, operation up to 32 MHz, 32 KB flash, and USB 2.0 crystal-less connectivity. The 32-pin UFQFPN package supports compact surface-mount layouts where board area is constrained. Its low-power positioning makes it relevant for connected sensors, USB peripherals, industrial controls, and battery-operated equipment, provided that the selected operating modes and peripheral requirements are confirmed against the manufacturer documentation. The part is suitable when a design needs an Arm Cortex-M0+ control core, USB connectivity, and a compact package. Its 32 MHz clock specification provides a clear performance target for embedded firmware, while the 32 KB flash capacity should be checked carefully against application code size, bootloader requirements, and future updates. The crystal-less USB feature can simplify clock integration, but USB layout, power, firmware, and signal-integrity requirements still require careful implementation. Before design release, verify the complete pin assignment, electrical limits, memory map, USB support, operating-temperature grade, and package land pattern in the official STMicroelectronics documentation. The supplied verified data confirms the core, clock, flash, USB connectivity, package, and distributor identity, but it does not provide every electrical or pin-level parameter required for a complete hardware design. This product page combines verified manufacturer and distributor information, structured specifications, application guidance, and design considerations. It is intended to support component identification and sourcing while clearly identifying details that still require confirmation from the official STM32L052K6 datasheet.

RFQ צור קשר
STM32L052R8T6 - 32MHz 64KB USB MCU | STMicroelectronics
STM32L052R8T6

STM32L052R8T6 - 32MHz 64KB USB MCU | STMicroelectronics

The STMicroelectronics STM32L052R8T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 64 KB of Flash memory, and USB 2.0 crystal-less connectivity in a 64-LQFP 10 x 10 mm package. The device combines an energy-efficient embedded design with USB connectivity for compact, low-power electronic products. An ultra-low-power microcontroller is a semiconductor designed to complete control and connectivity tasks while minimizing energy consumption during active operation and low-power modes. In the product hierarchy, the STM32L052R8T6 is an MCU, an embedded processing IC, and a member of STMicroelectronics' STM32L0 family. Its compact package and USB interface make it suitable for devices that need firmware-driven control, data exchange, and low standby demand without requiring a higher-power application processor. Key verified features include an ARM Cortex-M0+ core, 32-bit processing, operation up to 32 MHz, and 64 KB of programmable Flash. The integrated connectivity supports USB 2.0 operation without an external crystal, while the specified 2.5 V and 3.3 V operating voltages support conventional embedded supply environments. The STM32L052x6/8 family is positioned by STMicroelectronics as an ultra-low-power platform for connected, compact products. The 64-LQFP package exposes substantially more I/O than smaller microcontroller packages, allowing designers to connect external sensors, displays, communication transceivers, and control interfaces without moving to a more complex device. At the same time, the Cortex-M0+ architecture keeps the MCU suitable for embedded control rather than demanding graphical or high-throughput workloads. Exact RAM, peripheral, timer, GPIO, and electrical limits are not present in the supplied excerpts and should be confirmed in the manufacturer datasheet. Typical applications include USB-connected sensors, compact industrial controls, medical-device peripherals, battery-operated accessories, USB-to-data acquisition systems, and low-power monitoring equipment. The crystal-less USB capability can simplify connector-based products when the final board design and firmware satisfy STMicroelectronics' USB clocking requirements. The main design consideration is package and firmware validation. Engineers should confirm the complete 64-pin assignment, USB impedance routing, decoupling, clocking, and peripheral configuration against the manufacturer documentation. This page combines verified distributor specifications, pricing context, same-family alternatives, and practical sourcing guidance that is not consolidated in a single manufacturer excerpt.

RFQ צור קשר
STM32L053C8T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L053C8T6

STM32L053C8T6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32L053C8T6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz. It features 64 KB of Flash memory and 8 KB of SRAM, with a rich set of peripherals including USB 2.0, 12-bit ADC, DAC, comparators, and multiple communication interfaces. The device is housed in a 48-pin LQFP package, making it suitable for space-constrained applications. An ultra-low-power microcontroller (MCU) is a system-on-chip that integrates a processor core, memory, and peripherals, optimized for minimal energy consumption. The STM32L0 series is part of the STM32 family, which spans from entry-level Cortex-M0+ to high-performance Cortex-M7 cores. These MCUs are designed for battery-powered and energy-harvesting applications where power efficiency is critical, often featuring multiple low-power modes and dynamic voltage scaling. Key features include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two ultra-low-power comparators, and a USB 2.0 crystal-less device. The device also integrates a real-time clock (RTC) with calendar and alarm functions, and a true EEPROM emulation. The operating voltage range is 1.8V to 3.6V, with a temperature range of -40°C to +85°C. The STM32L053C8T6 is built on ST's ultra-low-power technology, featuring a flexible power management that allows the core to run at 32 MHz while consuming only 84 µA/MHz in Run mode. The device supports a wide range of communication interfaces including I2C, SPI, USART, and LPUART, making it versatile for IoT and sensor applications. The integrated USB 2.0 interface supports both device and host modes, with a crystal-less design that reduces BOM cost. Typical applications include IoT sensor nodes, wearable devices, smart home controllers, industrial sensors, and portable medical devices. The ultra-low-power consumption and rich analog peripherals make it ideal for battery-powered systems that require long operational life. The device also supports firmware updates via USB or UART bootloader, simplifying field maintenance. When designing with this MCU, careful attention should be paid to the power supply decoupling and the selection of low-power modes to maximize battery life. The use of the internal 16 MHz HSI oscillator can reduce external component count, but for precise timing, an external crystal is recommended. The device's low-power modes require proper configuration of the RTC and wake-up sources to achieve optimal energy efficiency.

RFQ צור קשר
STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST
STM32L053R8T6

STM32L053R8T6 - 32MHz Ultra-Low-Power Cortex-M0+ MCU | ST

The STMicroelectronics STM32L053R8T6 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a maximum CPU frequency of 32 MHz, 64 KB of Flash memory, 8 KB of SRAM, and a 64-pin LQFP-64 (10x10 mm) package. What is an ultra-low-power microcontroller? It is an embedded processor optimized to minimize energy consumption while still providing enough compute for sensing, control, and communication tasks. It sits in the product hierarchy: microcontroller -> ARM Cortex-M0+ -> ultra-low-power MCU -> battery-powered embedded system. These devices rely on low-leakage process technology, flexible clock gating, and sleep/stop/standby modes to cut current draw to microamp or nanoamp levels, enabling multi-year operation from a coin cell. Key features include a USB 2.0 full-speed crystal-less device controller, an LCD driver supporting up to 8x28 segments, a 12-bit ADC with hardware oversampling, a 12-bit DAC, two ultra-low-power comparators, and a real-time clock with calendar. The STM32L053R8T6 runs from a 1.8 V to 3.6 V supply (down to 1.65 V in power-down without BOR), operates from -40C to +125C, and provides I2C, SPI, and USART serial interfaces. Technically, this MCU is built in a 110 nm ultra-low-leakage process. It integrates an NVIC, a memory protection unit, a true random number generator, a CRC calculation unit, and a unique 96-bit device ID. Typical Run-mode consumption is 84 uA/MHz, while Standby with RTC is only 0.29 uA. The flexible clock tree accepts an internal 16 MHz RC, an external crystal, or a 32.768 kHz oscillator for low-power RTC timekeeping. Typical applications include portable medical devices, wireless IoT sensor nodes, smart utility meters, wearable devices, and LCD-equipped industrial products. The very low standby current and configurable wake-up events make this MCU ideal for systems that must spend most of their life asleep and wake periodically to sample, log, or transmit. When designing with this device, place a 100 nF decoupling capacitor near each VDD pin and a 1 uF bulk capacitor on the main supply. Configure the RTC, EXTI, or USART wake-up sources to keep average current in the microamp range while preserving responsiveness. This page synthesizes distributor availability, drop-in STM32L0 alternatives, comparison data, and practical low-power design notes that are not reprinted in the datasheet, helping engineers select and validate the part faster.

RFQ צור קשר
STM32L071CBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L071CBT6

STM32L071CBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics

The STM32L071CBT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M0+ core. It operates at a maximum frequency of 32 MHz and features 128 KB of Flash memory and 20 KB of SRAM. The device is housed in a 48-pin LQFP package (7x7 mm) and is designed for a wide range of battery-powered and energy-efficient applications. An ultra-low-power microcontroller (MCU) is a type of integrated circuit that combines a processor core, memory, and peripherals on a single chip, optimized for minimal power consumption. The STM32L0 series is part of the broader STM32 family, which includes various ARM Cortex-M based MCUs. These devices are essential in embedded systems where energy efficiency is critical, such as IoT devices, wearables, and industrial sensors. The STM32L071CBT6 sits within the STM32L0 category, which is known for its low-power modes and high integration. Key features of the STM32L071CBT6 include multiple low-power modes (Sleep, Low-power run, Low-power sleep, Stop with RTC, Stop without RTC, Standby with RTC, Standby without RTC), a 12-bit ADC with hardware oversampling, a 12-bit DAC, two comparators, and a wide range of communication interfaces including I2C, SPI, USART, and LPUART. The device also integrates a USB 2.0 full-speed device controller, a real-time clock (RTC) with calendar, and a true random number generator (TRNG). The STM32L071CBT6 is built on STMicroelectronics' ultra-low-power technology, which enables a dynamic current consumption as low as 87 uA/MHz in Run mode and 0.4 uA in Standby mode with RTC. This makes it ideal for applications that require long battery life, such as smart meters, medical devices, and wireless sensor nodes. The device also supports a wide supply voltage range from 1.65V to 3.6V, allowing operation from a single coin cell battery. Typical applications include IoT edge nodes, portable medical devices, smart home sensors, and industrial monitoring systems. The rich set of analog peripherals and communication interfaces makes it a versatile choice for many embedded designs. When designing with the STM32L071CBT6, it is important to consider the power supply decoupling and the use of the low-power modes to maximize battery life. The device supports a flexible clocking scheme with an internal 16 MHz RC oscillator, an external crystal oscillator, and a PLL. Proper PCB layout with short, low-inductance traces for the crystal and decoupling capacitors is recommended for reliable operation.

RFQ צור קשר