उत्पाद (44,000+)

MK2304S-2 - 133MHz Zero-Delay Buffer | Renesas | Clock
MK2304S-2

MK2304S-2 - 133MHz Zero-Delay Buffer | Renesas | Clock

The Renesas Electronics MK2304S-2 is a 133 MHz zero-delay buffer with one CMOS clock circuit in an 8-SOIC package measuring 0.154 inch, or 3.90 mm, wide. It uses PLL-based zero-delay technology to reproduce a clock signal with low skew, and the verified specifications identify a 1:1 input-to-output ratio. The device operates from a 3 V to 3.6 V supply and supports a 0°C to 70°C temperature range, making it suitable for conventional digital clock-distribution systems that fit those limits. A zero-delay buffer is a clock and timing IC that compensates clock-propagation delay between a source and downstream circuitry while maintaining a unity frequency relationship between input and output. Within the broader semiconductor hierarchy, it belongs to clock and timing integrated circuits and is functionally associated with clock buffers, clock drivers, and PLL-based synchronization circuits. Its principal engineering benefit is reduced clock skew among receiving devices, provided the power supply, trace topology, and output loading meet the manufacturer's operating requirements. The MK2304S-2 provides a maximum frequency of 133 MHz, one CMOS output path, PLL capability, and a unity input-to-output ratio. The verified data describes it as a low-jitter, low-skew, high-performance PLL-based buffer for high-speed applications. These characteristics make clock-edge alignment more important than merely restoring a degraded waveform. Designers must also account for supply decoupling, output loading, board-level skew, and the fact that the specified operating temperature is limited to 0°C through 70°C. Its 8-SOIC surface-mount package supports conventional PCB assembly and compact clock-distribution layouts. The verified operating information specifies a 3 V to 3.6 V supply, CMOS output, and one circuit. Exact propagation delay, input and output capacitance, output current, RMS jitter, cycle-to-cycle jitter, and package dimensions beyond the stated width are not available in the supplied records and must be checked in the manufacturer documentation before release to production. Typical uses include synchronizing CMOS logic, distributing a common clock among digital components, correcting accumulated board or driver skew, and buffering a clock source in communications, control, or embedded systems. The 133 MHz ceiling makes timing closure critical: propagation delay, output transition behavior, loading, and PCB mismatch can all affect whether the buffer preserves the required edge relationship. For implementation, follow the manufacturer's recommended 0.1 µF decoupling capacitor from VDD to GND and place it as close as practical to the device. Confirm source and sink capability against the target load, preserve a continuous ground reference, and validate worst-case skew at the actual operating temperature. Do not assume automotive or extended-temperature suitability because the verified range is 0°C to 70°C. This page combines verified distributor specifications, the manufacturer datasheet link, commercial availability signals, and a cross-brand replacement assessment. It also separates confirmed electrical facts from parameters that still require datasheet verification, helping engineers evaluate the MK2304S-2 without treating unverified timing, jitter, or current limits as guaranteed specifications.

RFQ संपर्क
MK2304S-2I - 133MHz Zero-Delay Buffer | Renesas
MK2304S-2I

MK2304S-2I - 133MHz Zero-Delay Buffer | Renesas

The Renesas Electronics MK2304S-2I is a PLL-based zero-delay buffer rated for clock frequencies up to 133 MHz at 3.3 V, with four low-skew CMOS outputs in an 8-SOIC surface-mount package. The -2I ordering code identifies the industrial-temperature device, while the package suffix S denotes the SOIC form factor. According to the available manufacturer description, it uses proprietary low-jitter PLL techniques to compensate propagation delay and provide tightly related outputs for high-speed digital systems. A zero-delay buffer is a clocking device that receives a reference clock and generates multiple buffered outputs intended to align edge timing. Unlike a simple logic buffer, a PLL-based zero-delay buffer can retime the input waveform while distributing it to several loads. In the clock and timing hierarchy, the MK2304S-2I is a clock buffer, a clock-distribution component, and ultimately a timing integrated circuit used to reduce skew between digital destinations. The verified source data identifies the device as a low-jitter, low-skew, high-performance PLL-based zero-delay buffer operating at 3.3 V. It provides four low-skew outputs and includes a bank of two outputs operating at one-half the input frequency. At speeds up to 133 MHz, these characteristics make the part relevant to processor clock trees, memory interfaces, communications equipment, and other systems where multiple clock domains require controlled edge relationships. The architecture is important because clock skew can determine setup and hold margins even when nominal frequency is acceptable. Four outputs allow a designer to distribute the reference to multiple loads, while the divided outputs can serve lower-rate clock domains. Zero-delay mode means the rising edge of the input clock is aligned with the corresponding outputs, although actual board-level timing still depends on trace length, load capacitance, supply integrity, and the receiving devices. Typical implementations include synchronous digital logic, networking equipment, industrial controllers, and communication systems. The 3.3 V supply requirement places it in systems that already provide a 3.3 V clocking rail. Designers should use short, impedance-controlled clock traces, maintain continuous return paths, and place decoupling close to the supply pins. Input and output timing, PLL loop behavior, and output loading should be evaluated with the complete system rather than inferred solely from the 133 MHz headline frequency. This product record combines verified distributor and manufacturer-linked specifications with practical clock-tree design guidance. It also distinguishes confirmed facts from unavailable details, preventing unsupported pin assignments, jitter numbers, pricing tiers, or lifecycle claims from being presented as established specifications. The result is intended to help engineers source the MK2304S-2I and evaluate whether its zero-delay, four-output architecture matches a specific synchronous design.

RFQ संपर्क
MK2304S-2ILF - 133MHz 3.3V PLL Zero Delay Buffer | Renesas
MK2304S-2ILF

MK2304S-2ILF - 133MHz 3.3V PLL Zero Delay Buffer | Renesas

The Renesas Electronics MK2304S-2ILF is a PLL-based zero delay buffer clock IC that delivers four low-skew outputs to 133 MHz from a single 3.3 V supply, housed in an 8-pin SOIC package measuring 0.154 in (3.90 mm) wide. It eliminates propagation delay between the reference clock and the driven outputs while holding output-to-output skew tightly under control, and it includes a bank of two outputs that operate at 1/2X the input frequency. A zero delay buffer is a clock distribution device that regenerates a clock through an internal phase-locked loop rather than passing it through a simple buffer. Because the output edge is re-timed by the PLL instead of following the input edge through a fixed propagation delay, the device can drive multiple loads across a board while presenting a single, consistent clock reference to the receiver. In the zero delay mode of operation, the rising edge of the input clock appears at the outputs with essentially no added latency, which matters when source-synchronous interfaces must be aligned. Key features of the MK2304S-2ILF include a maximum operating frequency of 133 MHz at 3.3 V, four independent low-skew outputs, and the dedicated 1/2X output bank for divide-by-two clocking without an external divider. The device is based on the manufacturer's proprietary low-jitter PLL techniques, which is the core technology that separates it from simple fan-out buffers in jitter performance. Internally, the PLL architecture re-times the reference clock and drives the output bank, so output edges depend on the internal loop rather than on logic gate delay. This gives cycle-to-cycle jitter that is independent of the number of loads on each output and largely independent of board loading, which is the primary reason designers move from a plain buffer to a PLL-based part when skew or jitter budgets are tight. Typical applications include networking and telecom line-card clock trees, server and storage backplane clock distribution, processor and FPGA clock fan-out, and general-purpose frequency multiplication or division for system timing. The 1/2X bank is useful in designs that need a divided clock for lower-speed peripherals alongside full-rate outputs for the main datapath. When designing around this device, treat the PLL as a sensitive analog block: route the reference clock over a short, continuous trace to pin 1, keep the supply decoupling capacitor close to the VDD pins, and leave the unused output channels terminated according to the datasheet guidance to avoid unnecessary dynamic current. Confirm the final edge budget in system, because board skew and load mismatch add to the device's own output skew. This page consolidates the manufacturer datasheet details, drop-in replacement candidates, comparison data and practical layout notes in one place, so you can qualify the part quickly and plan the clock tree before the first schematic review.

RFQ संपर्क
MK2304S-2ITR - 133MHz Zero-Delay Buffer | Renesas (Tape & Reel)
MK2304S-2ITR

MK2304S-2ITR - 133MHz Zero-Delay Buffer | Renesas (Tape & Reel)

The Renesas Electronics MK2304S-2ITR is a PLL-based zero-delay buffer rated for clock frequencies up to 133 MHz at 3.3 V, with four low-skew CMOS outputs in an 8-SOIC surface-mount package. The -2I ordering code identifies the industrial-temperature device, while the package suffix S denotes the SOIC form factor. According to the available manufacturer description, it uses proprietary low-jitter PLL techniques to compensate propagation delay and provide tightly related outputs for high-speed digital systems. A zero-delay buffer is a clocking device that receives a reference clock and generates multiple buffered outputs intended to align edge timing. Unlike a simple logic buffer, a PLL-based zero-delay buffer can retime the input waveform while distributing it to several loads. In the clock and timing hierarchy, the MK2304S-2ITR is a clock buffer, a clock-distribution component, and ultimately a timing integrated circuit used to reduce skew between digital destinations. The verified source data identifies the device as a low-jitter, low-skew, high-performance PLL-based zero-delay buffer operating at 3.3 V. It provides four low-skew outputs and includes a bank of two outputs operating at one-half the input frequency. At speeds up to 133 MHz, these characteristics make the part relevant to processor clock trees, memory interfaces, communications equipment, and other systems where multiple clock domains require controlled edge relationships. The architecture is important because clock skew can determine setup and hold margins even when nominal frequency is acceptable. Four outputs allow a designer to distribute the reference to multiple loads, while the divided outputs can serve lower-rate clock domains. Zero-delay mode means the rising edge of the input clock is aligned with the corresponding outputs, although actual board-level timing still depends on trace length, load capacitance, supply integrity, and the receiving devices. Typical implementations include synchronous digital logic, networking equipment, industrial controllers, and communication systems. The 3.3 V supply requirement places it in systems that already provide a 3.3 V clocking rail. Designers should use short, impedance-controlled clock traces, maintain continuous return paths, and place decoupling close to the supply pins. Input and output timing, PLL loop behavior, and output loading should be evaluated with the complete system rather than inferred solely from the 133 MHz headline frequency. This product record combines verified distributor and manufacturer-linked specifications with practical clock-tree design guidance. It also distinguishes confirmed facts from unavailable details, preventing unsupported pin assignments, jitter numbers, pricing tiers, or lifecycle claims from being presented as established specifications. The result is intended to help engineers source the MK2304S-2ITR and evaluate whether its zero-delay, four-output architecture matches a specific synchronous design.

RFQ संपर्क
MK2304S-2LF - 133MHz Zero-Delay Clock Buffer | Renesas
MK2304S-2LF

MK2304S-2LF - 133MHz Zero-Delay Clock Buffer | Renesas

The Renesas Electronics MK2304S-2LF is a 133 MHz zero-delay, low-skew clock buffer with four CMOS outputs, a 3 V to 3.6 V supply range, and 400 ps skew in an 8-pin SOIC package measuring 3.90 mm wide. It uses PLL-based zero-delay buffering to support high-speed systems requiring closely matched clock outputs and low propagation delay. A zero-delay buffer is a clock and timing IC that compensates for clock-distribution path delay so multiple downstream devices can receive a common edge at approximately the same time. Within the product hierarchy, it is a clock buffer, a type of clock and timing integrated circuit and a specialized form of digital signal buffer. Unlike a conventional CMOS buffer, which introduces propagation delay, a PLL-based zero-delay buffer uses phase control to minimize delay through the device. The MK2304S-2LF operates from 3 V to 3.6 V and supports operation up to 133 MHz. Its four low-skew CMOS outputs allow one input clock to feed several loads while limiting output-to-output timing variation. The device is identified as a clock driver with a 1:1 input-to-output ratio, making it suitable for distributed clocking rather than frequency multiplication or division. Its SOIC-8 surface-mount package also supports conventional automated board assembly. Technically, the key benefit is the combination of low skew and zero-delay behavior at 133 MHz. The specified 400 ps skew provides a quantitative limit for output timing alignment, while the PLL-based architecture reduces insertion delay through the buffer. This is useful when several high-speed loads must be clocked consistently without allowing fanout traces or loading to create unacceptable arrival-time differences. Typical uses include processor and memory clock distribution, communications equipment, graphics systems, peripheral clocking, and other digital systems operating at or below 133 MHz. The four-output configuration can reduce the number of separate clock-buffer circuits required when four related loads share the same source clock. Care should be taken to maintain controlled-impedance routing and provide proper decoupling close to the device. Designers should verify output loading, trace length matching, supply-noise sensitivity, and unused-output termination against the manufacturer datasheet. Because the supplied web data does not include a complete pin table or guaranteed electrical limits for every parameter, those details should be confirmed in the manufacturer documentation before layout release. This page consolidates the verified 133 MHz operating point, 3 V to 3.6 V supply range, four-output PLL architecture, 400 ps skew, package information, RoHS indication, distributor availability, and drop-in replacement findings into a design-oriented component reference.

RFQ संपर्क
MK2304S-2LFTR - 133MHz Zero-Delay Clock Buffer | Renesas (Tape & Reel)
MK2304S-2LFTR

MK2304S-2LFTR - 133MHz Zero-Delay Clock Buffer | Renesas (Tape & Reel)

The Renesas Electronics MK2304S-2LFTR is a 133 MHz zero-delay, low-skew clock buffer with four CMOS outputs, a 3 V to 3.6 V supply range, and 400 ps skew in an 8-pin SOIC package measuring 3.90 mm wide. It uses PLL-based zero-delay buffering to support high-speed systems requiring closely matched clock outputs and low propagation delay. A zero-delay buffer is a clock and timing IC that compensates for clock-distribution path delay so multiple downstream devices can receive a common edge at approximately the same time. Within the product hierarchy, it is a clock buffer, a type of clock and timing integrated circuit and a specialized form of digital signal buffer. Unlike a conventional CMOS buffer, which introduces propagation delay, a PLL-based zero-delay buffer uses phase control to minimize delay through the device. The MK2304S-2LFTR operates from 3 V to 3.6 V and supports operation up to 133 MHz. Its four low-skew CMOS outputs allow one input clock to feed several loads while limiting output-to-output timing variation. The device is identified as a clock driver with a 1:1 input-to-output ratio, making it suitable for distributed clocking rather than frequency multiplication or division. Its SOIC-8 surface-mount package also supports conventional automated board assembly. Technically, the key benefit is the combination of low skew and zero-delay behavior at 133 MHz. The specified 400 ps skew provides a quantitative limit for output timing alignment, while the PLL-based architecture reduces insertion delay through the buffer. This is useful when several high-speed loads must be clocked consistently without allowing fanout traces or loading to create unacceptable arrival-time differences. Typical uses include processor and memory clock distribution, communications equipment, graphics systems, peripheral clocking, and other digital systems operating at or below 133 MHz. The four-output configuration can reduce the number of separate clock-buffer circuits required when four related loads share the same source clock. Care should be taken to maintain controlled-impedance routing and provide proper decoupling close to the device. Designers should verify output loading, trace length matching, supply-noise sensitivity, and unused-output termination against the manufacturer datasheet. Because the supplied web data does not include a complete pin table or guaranteed electrical limits for every parameter, those details should be confirmed in the manufacturer documentation before layout release. This page consolidates the verified 133 MHz operating point, 3 V to 3.6 V supply range, four-output PLL architecture, 400 ps skew, package information, RoHS indication, distributor availability, and drop-in replacement findings into a design-oriented component reference.

RFQ संपर्क
MK2304S-2TR - 133MHz Zero-Delay Buffer | Renesas | Clock (Tape & Reel)
MK2304S-2TR

MK2304S-2TR - 133MHz Zero-Delay Buffer | Renesas | Clock (Tape & Reel)

The Renesas Electronics MK2304S-2TR is a 133 MHz zero-delay buffer with one CMOS clock circuit in an 8-SOIC package measuring 0.154 inch, or 3.90 mm, wide. It uses PLL-based zero-delay technology to reproduce a clock signal with low skew, and the verified specifications identify a 1:1 input-to-output ratio. The device operates from a 3 V to 3.6 V supply and supports a 0°C to 70°C temperature range, making it suitable for conventional digital clock-distribution systems that fit those limits. A zero-delay buffer is a clock and timing IC that compensates clock-propagation delay between a source and downstream circuitry while maintaining a unity frequency relationship between input and output. Within the broader semiconductor hierarchy, it belongs to clock and timing integrated circuits and is functionally associated with clock buffers, clock drivers, and PLL-based synchronization circuits. Its principal engineering benefit is reduced clock skew among receiving devices, provided the power supply, trace topology, and output loading meet the manufacturer's operating requirements. The MK2304S-2TR provides a maximum frequency of 133 MHz, one CMOS output path, PLL capability, and a unity input-to-output ratio. The verified data describes it as a low-jitter, low-skew, high-performance PLL-based buffer for high-speed applications. These characteristics make clock-edge alignment more important than merely restoring a degraded waveform. Designers must also account for supply decoupling, output loading, board-level skew, and the fact that the specified operating temperature is limited to 0°C through 70°C. Its 8-SOIC surface-mount package supports conventional PCB assembly and compact clock-distribution layouts. The verified operating information specifies a 3 V to 3.6 V supply, CMOS output, and one circuit. Exact propagation delay, input and output capacitance, output current, RMS jitter, cycle-to-cycle jitter, and package dimensions beyond the stated width are not available in the supplied records and must be checked in the manufacturer documentation before release to production. Typical uses include synchronizing CMOS logic, distributing a common clock among digital components, correcting accumulated board or driver skew, and buffering a clock source in communications, control, or embedded systems. The 133 MHz ceiling makes timing closure critical: propagation delay, output transition behavior, loading, and PCB mismatch can all affect whether the buffer preserves the required edge relationship. For implementation, follow the manufacturer's recommended 0.1 µF decoupling capacitor from VDD to GND and place it as close as practical to the device. Confirm source and sink capability against the target load, preserve a continuous ground reference, and validate worst-case skew at the actual operating temperature. Do not assume automotive or extended-temperature suitability because the verified range is 0°C to 70°C. This page combines verified distributor specifications, the manufacturer datasheet link, commercial availability signals, and a cross-brand replacement assessment. It also separates confirmed electrical facts from parameters that still require datasheet verification, helping engineers evaluate the MK2304S-2TR without treating unverified timing, jitter, or current limits as guaranteed specifications.

RFQ संपर्क
MK2308G-1H - 133MHz 1:8 Zero Delay Buffer | Renesas
MK2308G-1H

MK2308G-1H - 133MHz 1:8 Zero Delay Buffer | Renesas

The Renesas Electronics MK2308G-1H is a 133 MHz zero-delay buffer with a 1:8 input-to-output ratio, PLL bypass capability, CMOS clock outputs, and eight low-skew outputs in a 16-TSSOP package. It is designed to distribute one clock input across eight outputs at speeds up to 133 MHz while operating from 3.3 V. The part can generate outputs through its PLL for zero-delay operation or bypass the PLL and route the input directly for testing. A zero-delay buffer is a clock and timing IC that compensates propagation delay introduced by clock distribution networks while distributing a single reference to multiple loads. It belongs to the broader hierarchy of clock buffers, clock distribution circuits, phase-locked-loop timing devices, and clock and timing integrated circuits. Its principal purpose is to provide multiple low-skew clock outputs to processors, memory interfaces, communications equipment, and other digital systems that require synchronized logic. The verified data identifies the MK2308G-1H as a zero-delay buffer IC with a maximum frequency of 133 MHz, one circuit, a 1:8 ratio, PLL functionality with bypass, clock input, and CMOS output. A distributor listing identifies the physical package as 16-TSSOP with a stated body width of 4.40 mm. The device can also drive its outputs in tri-state or stop them at a low level, useful for shared-bus and test-control architectures. Its PLL-based architecture is intended for low-skew output generation at 3.3 V. The bypass path allows the input clock to be observed without PLL multiplication or correction, which can simplify diagnostic and test setups. The output count enables one reference clock to feed eight destinations without replicating the clock source eight times, reducing routing complexity and helping maintain consistent timing across a board. Typical applications include processor clock distribution, memory clock fanout, communications infrastructure, test-and-measurement equipment, and digital systems requiring multiple synchronized outputs. When implementing the circuit, use the manufacturer-recommended decoupling capacitors and place them close to the power and ground pins. The Renesas MK2308-1H datasheet search result specifies 0.01 mF capacitors between VDD and GND at the stated power-pin pairs. This product page synthesizes the verified distributor specifications, manufacturer datasheet link, package information, and practical implementation guidance. Because the supplied source snippets do not expose complete electrical limit tables or a complete verified pin map, unspecified values are marked as [DATA_NEEDED] rather than inferred.

RFQ संपर्क
MK2308G-1HI - 133MHz Zero-Delay Buffer | Renesas Electronics
MK2308G-1HI

MK2308G-1HI - 133MHz Zero-Delay Buffer | Renesas Electronics

Renesas Electronics MK2308G-1HI is a 133 MHz zero-delay buffer with PLL bypass, one clock circuit, and CMOS output in a 16-pin TSSOP package. It operates from 3 V to 3.6 V, making it a 3.3 V clock-distribution component for systems requiring regenerated, low-skew clock signals. The device can source a clock directly from its input for testing or use its PLL-based zero-delay function for normal operation. A zero-delay buffer is a clock-and-timing IC that receives a reference clock and redistributes it through a phase-locked loop or equivalent edge-alignment architecture. The zero-delay designation indicates that the device compensates propagation delay between the reference input and its outputs so downstream circuits can receive closely aligned clock edges. Within the broader hierarchy, the MK2308G-1HI is a clock buffer, which is a clock-and-timing IC and, ultimately, a semiconductor used for system clock distribution and phase alignment. The principal verified features are a maximum operating frequency of 133 MHz, a 3 V to 3.6 V supply range, CMOS clock outputs, and PLL operation with bypass. The single-circuit configuration is useful when a board requires one regenerated clock rather than several independently buffered outputs. Its 16-pin TSSOP package is compatible with conventional surface-mount assembly, while its 4.40 mm stated package width supports compact PCB layouts where the TSSOP mechanical envelope is acceptable. The PLL-based architecture separates the reference source from the distributed clock output and enables zero-delay clock regeneration. PLL bypass provides a direct-input test path that can assist board bring-up and fault isolation. Actual timing performance depends on input-clock stability, output loading, trace geometry, supply integrity, and the selected operating mode, so engineers should consult the Renesas datasheet and evaluate the complete clock path rather than relying on the maximum frequency alone. Typical uses include processor and FPGA clock distribution, memory-interface clock support, communications equipment, industrial control systems, and test-and-measurement instruments. The part is particularly relevant to 3.3 V designs where a regenerated clock is needed to improve edge alignment or isolate a clock source from downstream loading. In each case, trace length matching, return-path continuity, and output-load budgeting remain important implementation considerations. For a new layout, reserve the TSSOP land pattern, route the reference clock away from high-current switching nodes, and provide the decoupling arrangement specified by the manufacturer. If the PCB cannot support controlled clock topology, replacing the device without changing routing may not resolve timing or signal-integrity issues. Confirm operating mode, load, frequency, and package details against the current Renesas documentation before release. This page consolidates verified distributor specifications, manufacturer datasheet information, practical clock-design guidance, and honestly qualified replacement references. It separates confirmed drop-in candidates from merely similar devices, helping engineers compare package and lifecycle constraints without treating cross-reference search results as guaranteed equivalents.

RFQ संपर्क
MK2308G-1HILF - 133MHz Zero Delay Buffer | Renesas
MK2308G-1HILF

MK2308G-1HILF - 133MHz Zero Delay Buffer | Renesas

The Renesas Electronics MK2308G-1HILF is a 3.3 V zero-delay clock buffer with a maximum operating frequency of 133 MHz, one clock circuit, and PLL operation with bypass support. The device accepts a clock input, produces CMOS-compatible outputs, and is housed in a 16-pin TSSOP package measuring 0.173 inch wide by 0.173 inch long. A zero-delay buffer is a clock-integrity IC that uses an internal phase-locked loop to reproduce a clock while compensating for propagation delay through external routing. Its function hierarchy is zero-delay buffer, clock buffer, clock and timing IC, logic IC, and integrated circuit. Unlike a passive delay line, this device actively reconstructs its output clock, helping downstream circuits receive low-skew timing signals. The MK2308G-1HILF provides a 1:8 input-to-output ratio, CMOS output compatibility, and PLL bypass functionality. The bypass path is useful when the system does not require PLL-based phase adjustment. Its 133 MHz maximum frequency makes it suitable for clock distribution in communication, industrial control, computing, and test-and-measurement systems that operate below that frequency. Renesas describes the device as a 3.3 V low-skew clock buffer. The PLL architecture separates clock generation from input distribution, allowing the device to maintain controlled output timing when system traces and device delays would otherwise create skew between destinations. The 16-TSSOP package provides a compact surface-mount format compatible with standard PCB assembly processes. Typical applications include network-interface clock distribution, processor and peripheral clock routing, industrial control systems, communications equipment, and instrumentation. In these systems, the buffer can fan out one reference clock to multiple destinations while reducing the timing uncertainty introduced by unequal trace lengths. The primary design consideration is confirming that the intended input frequency, output-divider configuration, bypass state, and output loading remain within the manufacturer’s operating limits. PCB layout should minimize clock-trace mismatch and return clock and power grounds cleanly. Decoupling capacitors should be placed close to the supply pins according to the manufacturer’s recommended layout. This page consolidates the device’s key electrical characteristics, verified package information, a confirmed same-family replacement, practical clock-layout guidance, and an eight-parameter engineering comparison. It is designed to help engineers assess fit, replacement risk, and board-level implementation before committing to a design.

RFQ संपर्क
MK2308G-1HITR - 133MHz Zero-Delay Buffer | Renesas Electronics (Tape & Reel)
MK2308G-1HITR

MK2308G-1HITR - 133MHz Zero-Delay Buffer | Renesas Electronics (Tape & Reel)

Renesas Electronics MK2308G-1HITR is a 133 MHz zero-delay buffer with PLL bypass, one clock circuit, and CMOS output in a 16-pin TSSOP package. It operates from 3 V to 3.6 V, making it a 3.3 V clock-distribution component for systems requiring regenerated, low-skew clock signals. The device can source a clock directly from its input for testing or use its PLL-based zero-delay function for normal operation. A zero-delay buffer is a clock-and-timing IC that receives a reference clock and redistributes it through a phase-locked loop or equivalent edge-alignment architecture. The zero-delay designation indicates that the device compensates propagation delay between the reference input and its outputs so downstream circuits can receive closely aligned clock edges. Within the broader hierarchy, the MK2308G-1HITR is a clock buffer, which is a clock-and-timing IC and, ultimately, a semiconductor used for system clock distribution and phase alignment. The principal verified features are a maximum operating frequency of 133 MHz, a 3 V to 3.6 V supply range, CMOS clock outputs, and PLL operation with bypass. The single-circuit configuration is useful when a board requires one regenerated clock rather than several independently buffered outputs. Its 16-pin TSSOP package is compatible with conventional surface-mount assembly, while its 4.40 mm stated package width supports compact PCB layouts where the TSSOP mechanical envelope is acceptable. The PLL-based architecture separates the reference source from the distributed clock output and enables zero-delay clock regeneration. PLL bypass provides a direct-input test path that can assist board bring-up and fault isolation. Actual timing performance depends on input-clock stability, output loading, trace geometry, supply integrity, and the selected operating mode, so engineers should consult the Renesas datasheet and evaluate the complete clock path rather than relying on the maximum frequency alone. Typical uses include processor and FPGA clock distribution, memory-interface clock support, communications equipment, industrial control systems, and test-and-measurement instruments. The part is particularly relevant to 3.3 V designs where a regenerated clock is needed to improve edge alignment or isolate a clock source from downstream loading. In each case, trace length matching, return-path continuity, and output-load budgeting remain important implementation considerations. For a new layout, reserve the TSSOP land pattern, route the reference clock away from high-current switching nodes, and provide the decoupling arrangement specified by the manufacturer. If the PCB cannot support controlled clock topology, replacing the device without changing routing may not resolve timing or signal-integrity issues. Confirm operating mode, load, frequency, and package details against the current Renesas documentation before release. This page consolidates verified distributor specifications, manufacturer datasheet information, practical clock-design guidance, and honestly qualified replacement references. It separates confirmed drop-in candidates from merely similar devices, helping engineers compare package and lifecycle constraints without treating cross-reference search results as guaranteed equivalents.

RFQ संपर्क
MK2308G-1HLF - 133MHz PLL Zero Delay Buffer, 8 Outputs | Renesas
MK2308G-1HLF

MK2308G-1HLF - 133MHz PLL Zero Delay Buffer, 8 Outputs | Renesas

The Renesas Electronics MK2308G-1HLF is a 3.3 V zero delay buffer (ZDB) clock IC built on IDT proprietary low-jitter PLL techniques, delivering eight low-skew clock outputs at speeds up to 133 MHz in a 16-pin SOIC package. It is a fan-out and clock-tree element rather than a single-ended logic buffer, so a single source clock can be replicated across eight domain-crossing-friendly outputs with minimal propagation delay. A zero delay buffer is a clock and timing IC that uses phase-locked-loop technology to regenerate an incoming clock and re-time its edges, so the buffered output edge arrives effectively coincident with the input edge instead of after a fixed logic delay. In the device hierarchy it sits under clock buffer > clock and timing IC > integrated circuit > semiconductor, and it is used wherever a design needs many phase-aligned copies of a single reference clock. Key features of the MK2308G-1HLF include eight low-skew outputs, a maximum operating frequency of 133 MHz at 3.3 V, CMOS-compatible outputs, an integrated PLL with a bypass mode for test and debug, and per-output tri-state or stop-clock capability for bus segmentation. Because the outputs are regenerated through the PLL, the buffer also offers low phase noise and jitter performance that a simple CMOS fan-out buffer cannot match at high fan-out ratios. Internally, the PLL is the core element: the reference clock is multiplied and phase-shifted so that output edges align closely with the input edge. The bypass path lets a test engineer or a system architect select direct (non-PLL) clock propagation for characterization, while the PLL path provides the low-skew, low-jitter behavior needed in production. The 16-SOIC outline is a standard 3.90 mm wide narrow body surface mount package, easing prototyping on common evaluation platforms. Typical applications include CPU and FPGA clock fan-out, memory interface clock distribution, telecommunication line-card clocking, industrial control data acquisition, video timing distribution, and any system that needs multiple low-skew copies of a 133 MHz or slower reference clock. When designing around this part, confirm that the reference clock amplitude and slew rate meet the input requirements, and use the bypass mode only for bench characterization because switching between PLL and bypass paths changes the output timing relationship. Keep the fan-out traces short and matched so that package and board skew do not dominate the device's own output-to-output skew. This page consolidates the manufacturer device description, distributor listing data, and engineering notes on PLL zero-delay buffer selection so you can evaluate the MK2308G-1HLF against other fan-out and clock-tree options without digging through multiple documents.

RFQ संपर्क
MK2308G-1HTR - 133MHz 1:8 Zero Delay Buffer | Renesas (Tape & Reel)
MK2308G-1HTR

MK2308G-1HTR - 133MHz 1:8 Zero Delay Buffer | Renesas (Tape & Reel)

The Renesas Electronics MK2308G-1HTR is a 133 MHz zero-delay buffer with a 1:8 input-to-output ratio, PLL bypass capability, CMOS clock outputs, and eight low-skew outputs in a 16-TSSOP package. It is designed to distribute one clock input across eight outputs at speeds up to 133 MHz while operating from 3.3 V. The part can generate outputs through its PLL for zero-delay operation or bypass the PLL and route the input directly for testing. A zero-delay buffer is a clock and timing IC that compensates propagation delay introduced by clock distribution networks while distributing a single reference to multiple loads. It belongs to the broader hierarchy of clock buffers, clock distribution circuits, phase-locked-loop timing devices, and clock and timing integrated circuits. Its principal purpose is to provide multiple low-skew clock outputs to processors, memory interfaces, communications equipment, and other digital systems that require synchronized logic. The verified data identifies the MK2308G-1HTR as a zero-delay buffer IC with a maximum frequency of 133 MHz, one circuit, a 1:8 ratio, PLL functionality with bypass, clock input, and CMOS output. A distributor listing identifies the physical package as 16-TSSOP with a stated body width of 4.40 mm. The device can also drive its outputs in tri-state or stop them at a low level, useful for shared-bus and test-control architectures. Its PLL-based architecture is intended for low-skew output generation at 3.3 V. The bypass path allows the input clock to be observed without PLL multiplication or correction, which can simplify diagnostic and test setups. The output count enables one reference clock to feed eight destinations without replicating the clock source eight times, reducing routing complexity and helping maintain consistent timing across a board. Typical applications include processor clock distribution, memory clock fanout, communications infrastructure, test-and-measurement equipment, and digital systems requiring multiple synchronized outputs. When implementing the circuit, use the manufacturer-recommended decoupling capacitors and place them close to the power and ground pins. The Renesas MK2308-1H datasheet search result specifies 0.01 mF capacitors between VDD and GND at the stated power-pin pairs. This product page synthesizes the verified distributor specifications, manufacturer datasheet link, package information, and practical implementation guidance. Because the supplied source snippets do not expose complete electrical limit tables or a complete verified pin map, unspecified values are marked as [DATA_NEEDED] rather than inferred.

RFQ संपर्क
MK2308S-1H - 133MHz 8-Output Zero-Delay Buffer | Renesas
MK2308S-1H

MK2308S-1H - 133MHz 8-Output Zero-Delay Buffer | Renesas

The Renesas Electronics MK2308S-1H is a PLL-based, eight-output CMOS zero-delay buffer rated to 133 MHz in a 16-SOIC surface-mount package. It operates from a 3.0 V to 3.6 V supply and provides eight low-skew outputs that can be sourced either through the PLL for zero-delay operation or directly from the input for testing. The verified device family information identifies 200 ps output skew and describes the part as a low-phase-noise, high-speed clock distribution device. A zero-delay buffer is a clock and timing IC that regenerates a reference clock through a phase-locked loop, compensating for clock-distribution delay while preserving frequency. In the hierarchy of electronic components, this device belongs to clock and timing integrated circuits, then PLL-based clock drivers, frequency-distribution circuits, and finally broader digital and power-management systems. It is used where multiple logic domains need closely related clock signals. Key verified features include a maximum clock frequency of 133 MHz, eight low-skew outputs, CMOS-compatible signaling, 3.0 V to 3.6 V operation, and selectable tri-state or stop-at-a-low output behavior. The PLL can be bypassed for testing or direct clock propagation. The available operating-temperature information identifies a 0°C to 70°C range, making the device suitable for commercial-temperature clock-distribution equipment. The low-skew output architecture helps maintain timing relationships across multiple destinations, which is important in networking, telecommunications, and computing systems. Its 3.3 V supply operation is compatible with systems designed around modern CMOS clock domains, while the SOIC package supports conventional surface-mount assembly and inspection. Typical uses include clock fan-out for communications equipment, synchronized digital logic, computing interfaces, test and measurement systems, and embedded control platforms. Designers should account for trace-length matching, output-enable control, bypass testing, and the required decoupling capacitors. The verified datasheet search result specifically calls for 0.01 uF capacitors near the device power pins. This page combines verified distributor and manufacturer information, cross-reference results, application guidance, and design considerations into an engineering-focused component record. It is intended to support purchasing decisions while clearly separating verified values from parameters requiring further datasheet confirmation.

RFQ संपर्क
MK2308S-1HI - 133MHz Zero Delay Buffer | Renesas | Clock IC
MK2308S-1HI

MK2308S-1HI - 133MHz Zero Delay Buffer | Renesas | Clock IC

Renesas Electronics MK2308S-1HI is a PLL-based zero-delay buffer IC operating up to 133 MHz, with eight low-skew outputs and CMOS-compatible interfaces in a 16-pin SOIC package measuring 0.154 inches, or 3.90 mm, in width. Its verified supply-voltage range is 3 V to 3.6 V, and its specified industrial operating-temperature range is -40°C to 85°C. The device belongs to the clock-generator, PLL, frequency-synthesizer, and clock-buffer hierarchy within clock and timing ICs. A zero-delay buffer is a clock-distribution circuit that reproduces an input clock at multiple outputs while compensating for propagation delay through an internal phase-locked loop. It is used where a system must fan one clock source across several loads without introducing excessive output-to-output skew. The MK2308S-1HI can produce outputs from its PLL for zero-delay operation or directly from the input for testing. Its outputs can also be placed in tri-state or stopped-clock conditions, providing control functions useful in multi-domain clock trees. Key verified features include a maximum operating frequency of 133 MHz, eight outputs, one circuit, a PLL with bypass capability, and output skew of 200 ps. The CMOS bus interface supports integration with digital logic operating from the same 3.0 V to 3.6 V supply. The 16-SOIC surface-mount package provides a practical option for established through-hole-compatible board layouts and factory assembly processes. Technically, the device uses proprietary low-jitter PLL techniques to generate eight low-skew clock outputs. The PLL-based architecture is significant because it compensates for internal buffer propagation delay while distributing the clock. Direct-input bypass provides a diagnostic path for evaluating signal behavior without relying on the PLL-generated output mode. Output tri-state and stop-clock controls allow unused clock branches to be disabled or held according to system requirements. Typical applications include networking equipment, computing systems, telecommunications infrastructure, server clock trees, industrial control electronics, and communication modules. Its eight-output organization suits designs that must feed multiple clock domains, while the 133 MHz ceiling covers common legacy and industrial digital clocking requirements. The 3.3 V supply range also makes it suitable for systems whose logic rails are centered around 3.3 V. When laying out a circuit using the MK2308S-1HI, preserve short and symmetrical clock paths from the device to each destination and follow the manufacturer's decoupling and layout recommendations. Validate output timing at the receiver, especially when fanout, trace length, or capacitive loading changes. Because the verified data does not provide the complete pinout, output-enable truth table, or absolute timing limits, those details should be confirmed against the manufacturer datasheet before release. This page consolidates the verified Renesas and distributor information for the MK2308S-1HI, adds application-specific engineering context, identifies the available same-package comparison, and clearly separates confirmed specifications from parameters that still require datasheet verification.

RFQ संपर्क
MK2308S-1HILF - 133MHz 8-Output Zero-Delay Buffer | Renesas
MK2308S-1HILF

MK2308S-1HILF - 133MHz 8-Output Zero-Delay Buffer | Renesas

Renesas Electronics MK2308S-1HILF is a 3.3 V, 133 MHz zero-delay buffer IC with eight low-skew CMOS clock outputs in a 16-SOIC package. It uses a low-phase-noise PLL-based architecture to distribute one clock input across eight outputs while maintaining zero-delay operation. The device also supports PLL bypass and tri-state output operation. A zero-delay buffer is a clock-buffer IC that compensates propagation delay through its internal PLL so multiple destinations receive aligned clock edges. The MK2308S-1HILF belongs to the clock buffer and driver hierarchy, where clock management ICs support frequency synthesis, distribution, buffering, and low-skew fanout across digital, communications, industrial, and embedded systems. The principal operating characteristics are a 3.3 V supply, a maximum clock frequency of 133 MHz, eight outputs, and a 1:8 input-to-output fanout ratio. Outputs may be generated through the PLL for zero-delay operation or routed directly from the input for testing. CMOS outputs and low-skew behavior make the device appropriate for systems requiring predictable clock propagation among multiple loads. The PLL-based architecture is the core technical feature of the MK2308S-1HILF. It provides eight low-skew outputs at speeds up to 133 MHz, while bypass mode allows a clock to pass directly from the input to the outputs. The external-component requirements remain modest: the manufacturer datasheet specifies 0.01 mF decoupling capacitors at the two VDD and GND supply-pin pairs and notes that a 33 ohm series termination resistor may be used on each clock output to reduce reflections. Typical uses include fanout to processors, FPGAs, memory controllers, communications transceivers, and other clock-domain-crossing or multi-load systems. Eight outputs reduce the number of separate clock fanout stages required, while the low-skew characteristic helps preserve timing relationships between parallel interfaces and sequential logic. PCB implementation requires careful treatment of clock traces. Place the supply bypass capacitors adjacent to the specified pins, use short clock routes, maintain a continuous return path, and consider source termination when trace length, impedance discontinuities, or capacitive loading could produce reflections. Validate output timing and power integrity on the final board because package, connector, and interposer parasitics are not represented by the nominal frequency specification alone. This page combines the device architecture, operating limits, application guidance, pin-package information, and engineering trade-offs in one reference. It also distinguishes the directly supported ordering options from merely similar clock-buffer products, helping designers assess fit without treating unrelated package or feature sets as drop-in replacements.

RFQ संपर्क
MK2308S-1HITR - 133MHz Zero Delay Buffer | Renesas | Clock IC (Tape & Reel)
MK2308S-1HITR

MK2308S-1HITR - 133MHz Zero Delay Buffer | Renesas | Clock IC (Tape & Reel)

Renesas Electronics MK2308S-1HITR is a PLL-based zero-delay buffer IC operating up to 133 MHz, with eight low-skew outputs and CMOS-compatible interfaces in a 16-pin SOIC package measuring 0.154 inches, or 3.90 mm, in width. Its verified supply-voltage range is 3 V to 3.6 V, and its specified industrial operating-temperature range is -40°C to 85°C. The device belongs to the clock-generator, PLL, frequency-synthesizer, and clock-buffer hierarchy within clock and timing ICs. A zero-delay buffer is a clock-distribution circuit that reproduces an input clock at multiple outputs while compensating for propagation delay through an internal phase-locked loop. It is used where a system must fan one clock source across several loads without introducing excessive output-to-output skew. The MK2308S-1HITR can produce outputs from its PLL for zero-delay operation or directly from the input for testing. Its outputs can also be placed in tri-state or stopped-clock conditions, providing control functions useful in multi-domain clock trees. Key verified features include a maximum operating frequency of 133 MHz, eight outputs, one circuit, a PLL with bypass capability, and output skew of 200 ps. The CMOS bus interface supports integration with digital logic operating from the same 3.0 V to 3.6 V supply. The 16-SOIC surface-mount package provides a practical option for established through-hole-compatible board layouts and factory assembly processes. Technically, the device uses proprietary low-jitter PLL techniques to generate eight low-skew clock outputs. The PLL-based architecture is significant because it compensates for internal buffer propagation delay while distributing the clock. Direct-input bypass provides a diagnostic path for evaluating signal behavior without relying on the PLL-generated output mode. Output tri-state and stop-clock controls allow unused clock branches to be disabled or held according to system requirements. Typical applications include networking equipment, computing systems, telecommunications infrastructure, server clock trees, industrial control electronics, and communication modules. Its eight-output organization suits designs that must feed multiple clock domains, while the 133 MHz ceiling covers common legacy and industrial digital clocking requirements. The 3.3 V supply range also makes it suitable for systems whose logic rails are centered around 3.3 V. When laying out a circuit using the MK2308S-1HITR, preserve short and symmetrical clock paths from the device to each destination and follow the manufacturer's decoupling and layout recommendations. Validate output timing at the receiver, especially when fanout, trace length, or capacitive loading changes. Because the verified data does not provide the complete pinout, output-enable truth table, or absolute timing limits, those details should be confirmed against the manufacturer datasheet before release. This page consolidates the verified Renesas and distributor information for the MK2308S-1HITR, adds application-specific engineering context, identifies the available same-package comparison, and clearly separates confirmed specifications from parameters that still require datasheet verification.

RFQ संपर्क
MK2308S-1HLF - 133MHz 8-Output Zero Delay Buffer | Renesas
MK2308S-1HLF

MK2308S-1HLF - 133MHz 8-Output Zero Delay Buffer | Renesas

Renesas Electronics MK2308S-1HLF is a 3.3 V, eight-output, low-skew zero-delay buffer based on a phase-locked loop and operating up to 133 MHz. It provides CMOS outputs, 200 ps skew, and a 16-pin SOIC package. The device can generate outputs from its PLL for zero-delay operation or pass the input clock directly for testing. A zero-delay buffer is a clock-and-timing IC that regenerates a clock signal while using a phase-locked loop to minimize propagation delay between input and output. Its hierarchy is zero-delay buffer, clock buffer, clock driver, clock and timing IC, and integrated circuit. This topology helps distribute a high-speed source clock to multiple loads while controlling skew and jitter. The principal features of the MK2308S-1HLF include eight outputs, a maximum operating frequency of 133 MHz, 200 ps output skew, a 3 V to 3.6 V supply range, and CMOS interfacing. Each output can support tri-state operation, while the PLL-based architecture allows direct-input testing for circuit development and clock-tree analysis. Technically, the MK2308S-1HLF separates clock generation from distribution by using low-jitter PLL techniques. The eight outputs are intended to provide closely aligned copies of a common clock source. In zero-delay mode, the PLL compensates for internal propagation paths; in direct mode, the source clock can be routed without the PLL to help evaluate source behavior or board-level timing. Typical applications include processor and FPGA clock distribution, memory-controller fanout, networking-interface clock trees, test-and-measurement systems, and communications equipment operating at 3.3 V. It is particularly useful when several sequential circuits require related clock outputs and low output-to-output skew is more important than minimizing power consumption. Design the input and output clock paths for controlled impedance, maintain short and symmetric routing, and use the manufacturer pin-description table when assigning board connections. Decoupling, grounding, and unused-output handling should follow the manufacturer datasheet, especially when outputs are left unconnected or driven in tri-state mode. This page combines the MK2308S-1HLF operating specifications, pin-compatible family options, application guidance, and practical clock-tree design notes. It is structured to help engineers compare functionality, verify the 133 MHz and 200 ps timing targets, and assess where an eight-output 3.3 V zero-delay buffer fits within a larger clock-and-timing architecture.

RFQ संपर्क
MK2308S-1HTR - 133MHz 8-Output Zero-Delay Buffer | Renesas (Tape & Reel)
MK2308S-1HTR

MK2308S-1HTR - 133MHz 8-Output Zero-Delay Buffer | Renesas (Tape & Reel)

The Renesas Electronics MK2308S-1HTR is a PLL-based, eight-output CMOS zero-delay buffer rated to 133 MHz in a 16-SOIC surface-mount package. It operates from a 3.0 V to 3.6 V supply and provides eight low-skew outputs that can be sourced either through the PLL for zero-delay operation or directly from the input for testing. The verified device family information identifies 200 ps output skew and describes the part as a low-phase-noise, high-speed clock distribution device. A zero-delay buffer is a clock and timing IC that regenerates a reference clock through a phase-locked loop, compensating for clock-distribution delay while preserving frequency. In the hierarchy of electronic components, this device belongs to clock and timing integrated circuits, then PLL-based clock drivers, frequency-distribution circuits, and finally broader digital and power-management systems. It is used where multiple logic domains need closely related clock signals. Key verified features include a maximum clock frequency of 133 MHz, eight low-skew outputs, CMOS-compatible signaling, 3.0 V to 3.6 V operation, and selectable tri-state or stop-at-a-low output behavior. The PLL can be bypassed for testing or direct clock propagation. The available operating-temperature information identifies a 0°C to 70°C range, making the device suitable for commercial-temperature clock-distribution equipment. The low-skew output architecture helps maintain timing relationships across multiple destinations, which is important in networking, telecommunications, and computing systems. Its 3.3 V supply operation is compatible with systems designed around modern CMOS clock domains, while the SOIC package supports conventional surface-mount assembly and inspection. Typical uses include clock fan-out for communications equipment, synchronized digital logic, computing interfaces, test and measurement systems, and embedded control platforms. Designers should account for trace-length matching, output-enable control, bypass testing, and the required decoupling capacitors. The verified datasheet search result specifically calls for 0.01 uF capacitors near the device power pins. This page combines verified distributor and manufacturer information, cross-reference results, application guidance, and design considerations into an engineering-focused component record. It is intended to support purchasing decisions while clearly separating verified values from parameters requiring further datasheet confirmation.

RFQ संपर्क
MK2308S-2 - 133.3MHz Zero-Delay PLL Buffer | Renesas
MK2308S-2

MK2308S-2 - 133.3MHz Zero-Delay PLL Buffer | Renesas

The Renesas Electronics MK2308S-2 is a zero-delay PLL clock buffer operating up to 133.3 MHz, with one clock circuit and PLL bypass support in a 16-SOIC package measuring 0.154 inch, or 3.90 mm, wide. The device is intended for clock distribution and phase-alignment uses where outputs must support PLL operation or direct input-clock bypass. A zero-delay buffer is a clock and timing IC that uses a phase-locked loop to compensate propagation delay between an input clock and its outputs. In the broader hierarchy, this device belongs to clock generators, PLL-based frequency synthesizers, clock buffers, and timing ICs. Its CMOS output and bypass mode make it useful where clock distribution, testing, or phase alignment is required. The verified listing identifies the device as a zero-delay buffer with a maximum frequency of 133.3 MHz, one circuit, a 16-SOIC package, PLL operation with bypass, and clock input. The package is a surface-mount SOIC format with a stated width of 3.90 mm. These details identify the MK2308S-2 as a timing-integrity component rather than a general-purpose logic gate or power-management device. Because the supplied source material does not include a complete manufacturer electrical table, details such as supply voltage, output count, skew, jitter, propagation delay, temperature range, and exact pin names remain marked as data needed. Designers should consult the manufacturer datasheet and verify the pinout, voltage requirements, and timing limits before layout or production use. Typical uses include processor and FPGA clock distribution, communication-system clock conditioning, test-and-measurement clock networks, and general digital systems requiring low-skew clock fan-out. The supplied cross-reference data identifies MK2308S-2LF as a pin-compatible replacement candidate, while a comparison result also names CY2308SC-2T for evaluation. Both require package, timing, and application-specific verification rather than automatic substitution. For implementation, preserve short, controlled-impedance clock traces, provide the required bypass and decoupling capacitors, and keep the PLL input and outputs away from noisy high-current switching paths. Confirm whether bypass mode is required during startup or test before finalizing the system clock architecture. This page consolidates the verified distributor and datasheet-index information, replacement candidates, and practical design guidance to support component selection and PCB planning for the Renesas Electronics MK2308S-2.

RFQ संपर्क
MK2308S-2I - 133.3MHz Zero-Delay Buffer | Renesas
MK2308S-2I

MK2308S-2I - 133.3MHz Zero-Delay Buffer | Renesas

The Renesas Electronics MK2308S-2I is a 133.3 MHz PLL-based zero-delay buffer with one clock input, eight CMOS outputs, and a 16-SOIC surface-mount package. It operates from 3 V to 5.5 V and provides four divided outputs at one-half the input frequency, according to the available product and datasheet records. A zero-delay buffer is a clock and timing semiconductor that uses a phase-locked loop to reproduce a clock while compensating for propagation delay introduced by the buffer. In the broader hierarchy, it belongs to clock and timing ICs, frequency-control ICs, and PLL-based clock circuits. Its purpose is to supply multiple closely related clock outputs to high-speed digital systems. The available records identify the MK2308-2 family as a low-jitter, low-skew, PLL-based device intended for high-speed applications. The family description states that its eight outputs operate at speeds up to 133.3 MHz at 3.3 V. Four outputs are specified at one-half the input frequency, while the remaining outputs support zero-delay operation or direct clock bypass. The package is identified as a 16-SOIC measuring 3.90 mm wide. Because the target suffix denotes a specific ordering configuration, engineers should verify temperature grade, tube packaging, and production lifecycle status against current Renesas documentation before committing a new design. The verified web results establish the core function and several headline specifications, but they do not provide a complete parameter table, guaranteed timing limits, or an official manufacturer URL for this exact suffix. Typical uses include processor clock distribution, communications equipment, storage controllers, test systems, and other circuits requiring several outputs derived from one clock source. The divided bank can support lower-frequency peripherals while the undivided outputs serve the main digital domain. Independent output control may support testing and bus management, subject to the functions and limits stated in the datasheet. The principal design task is to verify clock-edge integrity at the intended voltage and frequency. Board traces should be short and return-current paths continuous, while PLL input and bypass connections must follow the manufacturer layout guidance. Probe or capacitance added by test equipment can alter edge rate and skew, so timing validation should include realistic loading. This page consolidates distributor availability, the Renesas MK2308-2 family description, package information, and replacement research. It also separates verified facts from missing production data so procurement and design teams can assess the MK2308S-2I without mistaking search snippets for a complete datasheet specification.

RFQ संपर्क
MK2308S-2ILF - 3.3V Zero-Delay Clock Buffer | Renesas
MK2308S-2ILF

MK2308S-2ILF - 3.3V Zero-Delay Clock Buffer | Renesas

Renesas Electronics MK2308S-2ILF is a 3.3 V zero-delay, low-skew clock buffer integrated circuit packaged in a 16-pin SOIC. The device is intended for clock distribution applications where multiple sequential logic circuits require closely related clock signals. Its defining functions are zero-delay buffering and low-skew output generation, which help preserve clock-edge alignment across distributed digital systems. A zero-delay buffer is a timing integrated circuit that accepts an incoming clock and reproduces it at its outputs with very low nominal propagation delay. It belongs to the clock and timing IC hierarchy, alongside clock generators, phase-locked loops, frequency synthesizers, clock dividers, and clock-tree components. Such buffers are commonly positioned after an oscillator or clock controller to fan out a high-quality reference clock without relying on a remote source to drive several loads directly. The MK2308S-2ILF family is identified as a 3.3 V, low-skew clock-buffer solution. A related 16-SOIC listing for the MK2308S-2I identifies the device as a zero-delay buffer operating to 133.3 MHz. These descriptions place the part in applications requiring orderly clock propagation through processors, programmable logic, communications equipment, and other synchronous digital systems. The SOIC-16 package supports conventional surface-mount PCB assembly while exposing the complete buffer interface. Clock buffers can reduce loading problems that arise when a source clock is connected to multiple destinations. By placing the buffer near the receiving circuitry, designers can isolate the source from board capacitance, interconnect loading, and receiver input thresholds. Low-skew operation is valuable when several destinations must act within a defined timing window. The buffer does not generate a new reference frequency; instead, it preserves and redistributes the input clock with controlled edge relationships. Typical application areas include processor and microcontroller clock trees, FPGA or CPLL input distribution, communications-interface clock fanout, data-acquisition systems, and compact industrial control electronics. The device is especially relevant where multiple downstream circuits share one oscillator output but require local buffering for predictable timing and signal integrity. When laying out a design, place the buffer close to the clock receivers, keep clock traces short and impedance-controlled, and minimize stub lengths. Confirm input and output logic levels, operating frequency, load capacitance, and enable or power-control requirements against the manufacturer datasheet before releasing the PCB. Adequate grounding and a clean supply reference are important because clock-edge timing quality can be affected by return-path discontinuities and supply noise. This product page combines the manufacturer-device identity, exact MPN, package information, clock-buffer function, application context, replacement considerations, and PCB-oriented design guidance. It is intended to help engineers identify the correct Renesas clock-buffer ordering code and evaluate board-level integration without obscuring the distinction between confirmed device facts and parameters that still require datasheet confirmation.

RFQ संपर्क
MK2308S-2ILFT - 133.3MHz 8-Output Zero-Delay Buffer | Renesas
MK2308S-2ILFT

MK2308S-2ILFT - 133.3MHz 8-Output Zero-Delay Buffer | Renesas

Renesas Electronics MK2308S-2ILFT is a PLL-based, low-jitter, low-skew zero-delay clock buffer operating up to 133.3 MHz at 3.3 V, with eight CMOS outputs in a 16-pin SOIC package. The device provides four 1X outputs and four 1/2X outputs, allowing simultaneous propagation and divided clock distribution from one source. A zero-delay buffer is a clock-integrity device that uses a phase-locked loop to reproduce and distribute a clock while compensating for internal propagation delay. In system terms, it belongs to the clock buffer and driver class within clock and timing integrated circuits, where multiple low-skew copies of a high-speed clock are required for processors, memory interfaces, communication links, and test equipment. The MK2308S-2ILFT combines clock generation, frequency division, and output buffering in one integrated circuit. Key features include operation from a 3 V to 3.6 V supply, a maximum operating frequency of 133.3 MHz, and output-to-output skew below 250 ps in zero-delay mode. Its eight outputs are organized as four 1X channels and four 1/2X channels. The PLL-based architecture aligns the rising edge of the input clock with the rising edges of the outputs, helping minimize accumulated timing displacement between destinations. The low phase-noise and low-jitter characteristics are important in systems that transfer synchronous data at high clock rates. By producing several outputs from a common PLL reference, the device reduces the cumulative skew that can develop when one clock source drives multiple loads through separate buffers. The CMOS interface also supports integration with 3.3 V digital logic, while the available test and bypass behavior aids board-level validation. Typical uses include CPU and DSP clock distribution, network-interface clock fanout, memory-controller clock distribution, communications equipment, and industrial control systems. The four divided outputs are particularly useful when a subsystem requires a reference at half the fundamental clock frequency. The same package also supports compact implementations where multiple clock domains must originate from one low-frequency reference. Designers should preserve a continuous supply path and route clock outputs according to the package guidance in the manufacturer datasheet. PCB return paths, ground-plane continuity, and matched trace characteristics help control edge degradation and coupling. The datasheet must be consulted for the exact pin assignment, output-disable truth table, bypass configuration, and recommended external component values before layout is released. This page combines the verified device characteristics, a practical application guide, pin and documentation guidance, and a disciplined comparison framework. It also distinguishes true same-footprint alternatives from functional clock-buffer options that would require different routing or a redesigned land pattern.

RFQ संपर्क
MK2308S-2LF - 133.3MHz Zero-Delay Buffer | Renesas
MK2308S-2LF

MK2308S-2LF - 133.3MHz Zero-Delay Buffer | Renesas

Renesas Electronics MK2308S-2LF is a PLL-based zero-delay buffer clock driver operating up to 133.3 MHz with eight low-skew outputs and a 3 V to 3.6 V CMOS supply range. The device is supplied in a 16-pin SOIC package measuring approximately 3.90 mm wide, making it suitable for compact systems requiring multiple low-skew clock copies. A zero-delay buffer is a clock and timing integrated circuit that regenerates a clock through a phase-locked loop while seeking near-zero propagation delay. Within the clock and timing IC hierarchy, the MK2308S-2LF combines a PLL-based timing engine, low-skew output distribution, and CMOS interfacing. It is used where several receiving circuits need a common clock reference with tightly controlled output-to-output timing. Key features include a maximum operating frequency of 133.3 MHz, eight outputs, a 3 V to 3.6 V supply voltage range, and 200 ps skew as identified in the indexed datasheet information. The architecture also includes four half-frequency outputs, allowing clock generation or division within the same package. A CMOS bus interface supports integration with contemporary digital logic operating at 3.3 V. Technically, the device uses proprietary low-jitter PLL techniques to distribute the input clock. In zero-delay mode, the rising input edge is mapped to output edges with near-zero delay, while the half-rate output bank provides divided clock signals. The 16-SOIC arrangement exposes the input, power, ground, and clock outputs, but exact individual pin names and the complete pin numbering map are not included in the provided source excerpts. Typical uses include processor and FPGA clock distribution, memory clock fanout, communications equipment, industrial control systems, and general-purpose digital logic. Eight outputs reduce the need for multiple clock-buffer packages when a design requires several synchronized destinations, while the low-skew specification supports deterministic data transfer between clocked circuits. Designers should verify output loading, trace length matching, supply decoupling, and the complete pin configuration against the manufacturer datasheet before layout. Because this part uses a PLL-based architecture, power-supply quality and clock-input stability can affect output jitter even when the advertised skew is low. This product record combines the verified distributor specifications, manufacturer-linked datasheet references, ordering information, and same-footprint alternatives. It also adds application guidance, comparison parameters, and practical integration notes that are not consolidated in the individual distributor listings.

RFQ संपर्क