उत्पाद (46,000+)

XC2C512-7FTG256C - 512-Macrocell 1.8V CPLD | AMD
XC2C512-7FTG256C

XC2C512-7FTG256C - 512-Macrocell 1.8V CPLD | AMD

The AMD XC2C512-7FTG256C is a 512-macrocell CoolRunner-II complex programmable logic device with 12K system gates, a 1.8 V core supply, and 270 user I/O, housed in a 256-pin FTBGA package. It combines nonvolatile configuration storage, programmable logic, and in-system programmability for designs requiring fast configuration and flexible interface adaptation. A CPLD is a programmable logic device whose interconnected macrocells implement digital logic functions. CoolRunner-II devices use CMOS technology and embedded nonvolatile configuration memory, allowing a circuit to retain its programmed configuration without a separate program-memory device. Within the semiconductor hierarchy, the XC2C512 belongs to the programmable-logic family, bridging simple fixed-function logic and higher-capacity FPGA and CPLD architectures. The -7 speed designation identifies a 7 ns-class performance option, while the C suffix denotes the commercial temperature grade listed as 0°C to 70°C. Four independently powered output banks support interfacing with 1.5 V, 1.8 V, 2.5 V, and 3.3 V devices. DataGATE functionality can suppress output transitions and reduce switching activity, making the device useful in designs where controlled power behavior and signal integrity are important. The device contains 512 macrocells and is described as a 12K-gate CoolRunner-II CPLD. Its 0.18 µm CMOS implementation combines nonvolatile configuration with fast in-system programming. Although one distributor comparison lists a 128 MHz maximum operating frequency and another product summary lists 179 MHz, the speed grade itself is consistently identified as the 7 ns class. System timing should therefore be evaluated with the AMD DS096 datasheet and the selected design tool rather than inferred from a single catalog frequency value. Typical uses include industrial control interfaces, bus translation, protocol conversion, board-level glue logic, and compact embedded control systems. The four output banks simplify connections between low-voltage core logic and higher-voltage peripherals, while the large user-I/O count supports parallel buses, control registers, and multiple communication interfaces on a single device. PCB design should preserve the exact FTG256 footprint, route programming signals according to the AMD guidance, and provide the required core and bank supply rails. Designers should also validate signal integrity on high-speed outputs and include decoupling close to the package power pins. Because the package is a fine-pitch BGA, assembly capability, via geometry, solder-mask design, and thermal conditions require review before production release. This page consolidates the device identity, verified electrical and packaging facts, selection guidance, and engineering considerations needed to evaluate the XC2C512-7FTG256C against same-package CoolRunner-II options and broader programmable-logic families.

RFQ संपर्क
XC2C64A-5CP56C - 64-Macrocell 1.8V CPLD | AMD
XC2C64A-5CP56C

XC2C64A-5CP56C - 64-Macrocell 1.8V CPLD | AMD

The AMD XC2C64A-5CP56C is a 64-macrocell CoolRunner-II complex programmable logic device with a 4.6 ns maximum pin-to-pin propagation delay, 333 MHz internal frequency, and 45 user I/O pins. It is packaged in a 56-ball CSP/LFBGA measuring 6 x 6 mm with a 0.50 mm ball pitch and is optimized for 1.8 V systems. The device is a surface-mount, in-system programmable semiconductor that consolidates programmable Boolean logic, general-purpose I/O, and dedicated resources into one package. A complex programmable logic device, or CPLD, is a user-programmable digital logic device within the broader FPGA and CPLD category. Unlike a microprocessor, which executes software instructions, a CPLD directly implements combinational and sequential logic in hardware. Its nonvolatile configuration makes it suitable for control logic, interface adaptation, bus decoding, state machines, and industrial embedded systems that must retain their configured behavior after power removal. The XC2C64A family provides 64 macrocells and four logic elements or blocks, according to the indexed manufacturer-data summary. Its 4.6 ns speed grade supports deterministic logic operation, while the 45 user I/O pins provide connections to external digital systems. The device is specified as a CMOS CPLD, uses a 1.7 V to 1.9 V internal supply range, and is optimized around low-voltage 1.8 V system design. The reported 333 MHz internal frequency is distinct from the 4.6 ns propagation-delay grade. The -5 speed designation identifies the performance grade used for timing analysis and system design. The CP56C package designation identifies a 56-terminal, 6 x 6 mm, 0.50 mm-pitch surface-mount package. In-system programmability allows a board designer to configure the device through the programming interface, while nonvolatile configuration supports repeatable startup behavior. These characteristics make the part appropriate for compact control and interface logic rather than general-purpose software processing. Typical uses include industrial controller interface logic, data-acquisition and instrumentation control, communication-interface adaptation, embedded system glue logic, and general-purpose board support functions. In these applications, the 64 macrocells can implement multiple state machines, address decoders, latch logic, and protocol converters, while the 45 user I/O pins provide interfaces to sensors, converters, memories, and other digital peripherals. The 1.8 V optimization is especially relevant for modern low-voltage system rails. PCB implementation should follow the AMD CoolRunner-II package, pinout, and board-layout documentation exactly. Because the verified source summary confirms the package dimensions and ball pitch but does not provide the complete numbered ball assignment, designers must consult DS311 before assigning power, ground, configuration, and user I/O nets. Placement should also preserve the manufacturer-specified footprint, solder-mask, paste, and thermal-relief geometry. This page combines the verified distributor specifications, the manufacturer DS311 datasheet reference, packaging details, engineering guidance, and a transparent assessment of drop-in alternatives. Unlike a distributor listing that primarily records inventory and price, it distinguishes the device's 4.6 ns speed grade, 333 MHz internal frequency, 1.8 V supply range, macrocell count, and application constraints. It also identifies where additional design data is required rather than inferring an undocumented pinout or package drawing.

RFQ संपर्क
XC2C64A-5CPG56C - 64-Macrocell 1.8V CPLD | AMD
XC2C64A-5CPG56C

XC2C64A-5CPG56C - 64-Macrocell 1.8V CPLD | AMD

The AMD XC2C64A-5CPG56C is a CoolRunner-II complex programmable logic device with 64 macrocells, a 1.8 V supply, and 45 user I/O pins in a 6 x 6 mm, 0.50 mm-pitch CSP-56 package. It operates from a 1.8 V core supply and is designed for low-power, nonvolatile programmable logic in compact embedded systems. The -5 speed designation corresponds to a listed 263 MHz internal frequency, while individual path delays are characterized separately. A CPLD is a programmable logic device that combines programmable AND/OR logic structures with a nonvolatile configuration memory architecture. In the electronics hierarchy, a CPLD is a user-programmable digital semiconductor used for control logic, interface translation, decoding, state machines, and bus arbitration. Unlike a mask-programmed logic device, it can be configured after manufacture, while its nonvolatile configuration allows operation without continuously loading a program into volatile memory. The XC2C64A provides 64 logic macrocells and as many as 45 user I/O pins, making it suitable for designs that need substantially more routing flexibility than discrete gates. Its CMOS implementation uses 0.18 µm technology and targets 1.8 V systems. Listed features include a 4.6 ns fastest pin-to-pin logic delay and low quiescent current, supporting both general-purpose embedded control and low-power portable equipment. CoolRunner-II devices use a fast, deterministic interconnect architecture for logic-intensive designs. The architecture is particularly useful where the design must combine multiple state machines, address decoding, bus control, and data-path functions in one device. The XC2C64A combines a 1.5K-equivalent logic capacity with in-system programmability, allowing a prototype to be revised without changing the PCB when the configuration interface and power architecture remain unchanged. Typical applications include industrial control interfaces, portable instrumentation, embedded system glue logic, communication protocol conditioning, and compact consumer products. Its 45 I/O pins provide sufficient connectivity for parallel data interfaces and control signals, while the small package supports space-constrained board layouts. The CPLD should be paired with a compatible configuration device or supported in-system programming arrangement when a persistent configuration file is required. The principal design considerations are correct voltage sequencing, signal compatibility across the 1.8 V core domain, and careful treatment of the CSP-56 land pattern. The 0.50 mm ball pitch requires a PCB footprint and assembly process capable of fine-pitch component placement. Confirm pin assignments, configuration pins, power pins, and I/O standards against DS311 before fabrication. This product page combines the AMD CoolRunner-II device characteristics with package guidance, verified alternative references, and practical design notes. It helps engineers identify whether the XC2C64A-5CPG56C matches a 64-macrocell, 1.8 V, fine-pitch logic design and what must be checked before PCB release or replacement sourcing.

RFQ संपर्क
XC2C64A-5QFG48C - 64-Macrocell 1.8V CPLD | AMD Xilinx
XC2C64A-5QFG48C

XC2C64A-5QFG48C - 64-Macrocell 1.8V CPLD | AMD Xilinx

AMD Xilinx XC2C64A-5QFG48C is a CoolRunner-II complex programmable logic device with 64 macrocells, 37 I/O, and a 1.8 V operating supply in a 48-pin QFN exposed-pad package. It delivers up to 263 MHz performance, uses 0.18 µm CMOS technology, and provides approximately 1.5K logic gates. The device supports in-system programming and is optimized for low-voltage systems. A CPLD is a programmable logic device that retains its configuration in nonvolatile memory and combines configurable logic with dedicated input and output resources. In the device hierarchy, a CPLD sits between simple programmable logic and an FPGA: it offers faster deterministic routing for moderate logic-density designs while providing nonvolatile configuration, lower system complexity, and a familiar PCB footprint. The XC2C64A family provides up to 4.6 ns pin-to-pin logic delays and supports 1.8 V systems. Its low 15 A quiescent current is suitable for power-conscious embedded equipment. In-system programming allows configuration or field updates without removing the device from its circuit, while the 64-macrocell architecture accommodates control logic, interface adaptation, state machines, and fixed-footprint hardware customization. The 0.18 µm CMOS implementation combines nonvolatile configuration storage with deterministic CPLD timing. The -5 suffix identifies a particular speed grade, while QFG48C identifies the 48-lead QFN exposed-pad package and commercial temperature designation. The exposed pad supports heat transfer from the device to the PCB, making copper placement and thermal analysis important in compact embedded systems. Typical applications include industrial control, embedded instrumentation, communications-interface adaptation, low-voltage consumer electronics, and compact control systems. A 37-I/O device can connect processors, sensors, memory interfaces, status indicators, and discrete I/O when the design does not require the capacity or routing flexibility of a larger FPGA. The primary design consideration is maintaining a clean 1.8 V rail and providing adequate thermal copper beneath the exposed pad. Confirm timing constraints for every external path, reserve configuration pins for their designated functions, and validate all I/O standards against the AMD DS311 device data sheet before layout release. This product page organizes the XC2C64A electrical identity, package details, drop-in alternatives, comparison criteria, and PCB-design guidance for engineers evaluating legacy CPLD upgrades and second-source sourcing.

RFQ संपर्क
XC2C64A-5VQ100C - 64-Macrocell 1.8V CPLD TQFP-100 | AMD Xilinx
XC2C64A-5VQ100C

XC2C64A-5VQ100C - 64-Macrocell 1.8V CPLD TQFP-100 | AMD Xilinx

The AMD (Xilinx) XC2C64A-5VQ100C is a CoolRunner-II Complex Programmable Logic Device (CPLD) with 64 macrocells, 1,500 usable gates, a 4.6 ns pin-to-pin logic delay, and up to 45 user I/O pins, housed in a 100-pin very thin quad flat package (VQFP-100 / TQFP-100) operating from a 1.8 V core supply. A CPLD (Complex Programmable Logic Device) is a class of programmable logic IC that sits between simple SPLD devices such as GAL/16V8 parts and full FPGAs in the programmable logic hierarchy. CPLDs provide deterministic, pin-to-pin timing for glue logic, state machines, bus interfacing, and power-on configuration control, and are non-volatile - the design is retained through power cycles without external configuration memory. Key features of the XC2C64A include the industry-leading 0.18 micron CMOS process optimized for 1.8 V systems, as low as 15 uA quiescent current, internal frequencies up to 333 MHz, and in-system programmability (ISP). The CoolRunner-II architecture delivers extremely low dynamic power because it uses a true 1.8 V core rather than 3.3 V or 5 V legacy cores, making it well suited to battery-powered and thermally constrained designs. Technically, the XC2C64A provides 4 function blocks containing 16 macrocells each, supporting both combinational and registered logic with synchronous and asynchronous resets. The -5 speed grade offers 4.6 ns pin-to-pin delay and 263 MHz system toggle performance, with DataGate and CoolPower technologies further reducing active power. Schmitt-trigger inputs, optional dual-DATA-gate inputs, and 3.3 V-tolerant I/O standards through level-shifting ease mixed-voltage system integration. Typical applications include glue logic consolidation in embedded systems, power-up sequencing and FPGA configuration control, address decoding, bus bridging, portable and battery-operated instrumentation, and industrial control boards where deterministic timing and non-volatile logic are required. Design consideration: the 1.8 V core supply requires a clean, well-decoupled rail; I/O banks may interface to 3.3 V systems, but check the DS311 datasheet I/O standard selection in your tools before committing pin assignments. This page synthesizes distributor listings, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
XC2C64A-5VQ44C - 4.6ns 64-Macrocell CPLD | AMD
XC2C64A-5VQ44C

XC2C64A-5VQ44C - 4.6ns 64-Macrocell CPLD | AMD

AMD Xilinx XC2C64A-5VQ44C is a 64-macrocell CoolRunner-II complex programmable logic device with a 4.6 ns pin-to-pin logic delay, a 333 MHz internal frequency, and a 44-pin VQFP package. It is a CMOS programmable logic device intended for deterministic signal processing, communications, industrial automation, and custom hardware acceleration. The -5 speed designation identifies the 4.6 ns performance grade, while the 44-pin package supports compact, surface-mount PCB implementations. A CPLD is a programmable logic device that combines programmable AND/OR logic structures with non-volatile configuration memory. The XC2C64A belongs to the CoolRunner-II CPLD hierarchy, which sits between fixed-function logic and larger field-programmable gate arrays. It is useful when a design needs deterministic propagation timing, in-system reconfiguration, and a modest logic-cell count without the complexity of an FPGA or processor-based implementation. The device provides 64 macrocells and approximately 1.5K gates according to the verified product data. Its 4.6 ns pin-to-pin delay supports moderate-speed control, decode, glue-logic, and interface tasks. The listed 333 MHz internal frequency provides additional timing context, while its optimized 1.8 V architecture targets modern low-voltage digital systems. A 15 A quiescent-current figure appears in the supplied specification extract, although the intended operating supply details should be confirmed in the manufacturer datasheet before power budgeting. Typical uses include communications equipment, industrial automation, real-time signal processing, bus-interface control, data-capture front ends, and embedded control logic. The CPLD is particularly suitable for deterministic designs requiring several interconnected state machines, protocol converters, or glue-logic functions around microcontrollers and processors. Its macrocell architecture also allows designers to consolidate small controller sections into one programmable device rather than using several unrelated fixed-function ICs. Designers should verify power-supply voltage, I/O standards, available package variants, and acquisition-file compatibility in the DS311 device documentation. PCB layouts should preserve adequate ground and power distribution, and unused inputs must be handled according to the manufacturer guidelines. This page synthesizes the supplied specifications, sourcing information, speed-grade alternatives, and design guidance into a compact engineering reference for the XC2C64A-5VQ44C.

RFQ संपर्क
XC2C64A-5VQG44C - 64-Macrocell 1.8V CPLD | AMD Xilinx
XC2C64A-5VQG44C

XC2C64A-5VQG44C - 64-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C64A-5VQG44C is an in-system-programmable CPLD with 64 macrocells, 33 user I/O pins, and a 4.6 ns pin-to-pin logic delay, housed in a 44-pin VTQFP package. It is manufactured in 0.18 µm CMOS and optimized for 1.8 V systems. A complex programmable logic device is a programmable semiconductor used to implement fixed or time-varying digital logic. Within the semiconductor hierarchy, a CPLD occupies the position between simple programmable logic arrays and more complex programmable logic devices. It combines nonvolatile in-system programmability with deterministic logic timing and a compact package suited to control, interface, glue-logic, and low-power embedded applications. The CoolRunner-II architecture provides 64 macrocells, approximately 1.5K equivalent gates, and a maximum operating frequency listed as 159 MHz. The -5 speed designation corresponds to the 4.6 ns pin-to-pin delay, while the G44 suffix identifies the 44-pin package and C identifies the commercial temperature grade. The device also supports 1.8 V-oriented operation and has a low quiescent current specification of approximately 15 µA. The XC2C64A family is designed for compact implementations that require several digital functions without loading a larger programmable logic device. Its macrocell-based architecture provides predictable routing delays and nonvolatile configuration retention. The in-system programming capability allows configuration signals, logic behavior, or board-level production programming to be managed without relying on a separate mask-programmed device. Typical uses include industrial control and automation, communication equipment, portable and battery-operated electronics, interface control, display control, and embedded system support logic. The 33 available I/O pins allow the device to implement parallel data paths, control signals, state machines, and peripheral glue logic while conserving board area. Its low quiescent current is particularly useful when the system spends substantial time in a low-power state. PCB design should preserve the manufacturer-specified decoupling and programming-interface layout. Place the input, output, and configuration bypass capacitors close to their associated pins, route programming signals away from sensitive high-speed nodes, and provide a clean ground reference beneath the device. Confirm voltage compatibility for every connected bank because the 1.8 V optimization describes the intended design point rather than a blanket permission to use any I/O voltage. This product record combines the DS311 device specifications, package and speed-grade details, sourcing information, and application-oriented design guidance to support CPLD selection, PCB implementation, and replacement planning.

RFQ संपर्क
XC2C64A-7CP56C - 64-Macrocells, 1.8V CPLD | AMD
XC2C64A-7CP56C

XC2C64A-7CP56C - 64-Macrocells, 1.8V CPLD | AMD

The AMD XC2C64A-7CP56C is a 64-macrocells, 1.8 V CoolRunner-II complex programmable logic device with a 333 MHz internal frequency, 4.6 ns pin-to-pin logic delay, 45 user I/Os, and a 56-pin CSP package. Its 0.18 µm CMOS implementation targets compact, low-power programmable logic systems where deterministic routing and nonvolatile configuration are more important than FPGA-level capacity. A complex programmable logic device, or CPLD, is a user-programmable semiconductor within the broader programmable-logic hierarchy. It combines multiple logic macrocells, programmable interconnect, and I/O blocks into a relatively small device. Compared with a field-programmable gate array, the XC2C64A is intended for designs with moderate logic density, simpler timing analysis, and rapid in-system reconfiguration. Its CoolRunner-II architecture combines configurable logic with low-power operation for 1.8 V systems. The XC2C64A provides 64 macrocells, 45 user I/Os, a 333 MHz internal frequency, and a listed 5 ns propagation delay. Its optimized 1.8 V architecture, as fast as 4.6 ns pin-to-pin logic delays, and as low as 15 µA quiescent current make it useful in compact control, interface, and glue-logic designs. The CSBGA-56 package reduces board area but requires careful ball-layout and assembly planning. The device uses a 0.18 µm CMOS process and belongs to the CoolRunner-II product family. The 64 macrocells provide substantially more logic capacity than basic switch-mode PAL devices while retaining a comparatively simple programmable architecture. The supplied source data identifies a 333 MHz internal frequency, 45 user I/Os, a 5 ns propagation-delay listing, and the 4.6 ns pin-to-pin performance figure, making this part suitable for deterministic control logic operating from a 1.8 V supply. Typical applications include industrial control and automation, embedded interface logic, protocol conversion, bus arbitration, power sequencing, and compact communications equipment. It can also implement glue logic around processors, ASICs, or larger programmable devices. In these applications, the 64-macrocells provide enough logic capacity to consolidate small control functions, while the 45 I/Os support mixed digital connections within a space-constrained board area. The principal design consideration is package and power planning. Because the part uses a 56-ball CSP rather than a leaded package, its footprint must match the exact CSBGA land pattern, and assembly must account for ball pitch, solder mask, paste stencil, and inspection requirements. Designers should also confirm the complete pin assignment and supported I/O standards against DS311 before schematic capture; complete pin names were not included in the supplied verified excerpts. This page consolidates the supplied manufacturer and distributor information, separates documented specifications from missing data, compares same-family replacement options, and adds practical package-selection guidance. It is intended to complement, not replace, the official XC2C64A CoolRunner-II CPLD data sheet and the device configuration, timing, and package design files required for production implementation.

RFQ संपर्क
XC2C64A-7CP56I - 64-Macrocell 333 MHz CPLD | AMD
XC2C64A-7CP56I

XC2C64A-7CP56I - 64-Macrocell 333 MHz CPLD | AMD

AMD XC2C64A-7CP56I is a 64-macrocell CoolRunner-II complex programmable logic device with a 333 MHz internal frequency, 5 ns stated propagation delay, 45 user I/Os, and a 6 x 6 mm CSP-56 package. It is optimized for 1.8 V systems and combines in-system programmability with CMOS programmable logic in a surface-mount package. A CPLD is a programmable logic device that converts stored configuration data into digital logic functions. In the semiconductor hierarchy, a CPLD sits between basic programmable logic arrays and more complex FPGAs, combining macrocell-based logic with dedicated programmable interconnect. The CoolRunner-II family is designed for compact control, interface, glue-logic, and signal-processing designs where deterministic timing, modest logic capacity, and low system complexity are important. The device provides 64 macrocells, 4.6 ns pin-to-pin logic delays, and a maximum 6.7 ns propagation-delay specification for the -7 speed grade. Its 1.7 V to 1.9 V internal supply range targets low-voltage systems, while the quoted 15 A quiescent current and optimized 1.8 V architecture support compact, power-conscious industrial equipment. The CP-56 package supplies 56 terminals for power, configuration, control, and 45 user I/O functions. The -7 speed grade provides a practical balance between timing and component selection: it is specified at a 333 MHz internal frequency while maintaining a smaller logic delay than slower general-purpose alternatives. The A designation identifies the CoolRunner-II architecture generation, while the ordering suffix identifies package, temperature, and speed characteristics that must be checked against the manufacturer's device documentation before a design is released. Typical uses include industrial controller interface logic, data-acquisition modules, programmable glue logic, communications adapters, embedded control, and low-voltage equipment requiring in-system reconfiguration. In each case, the 64 macrocells provide enough logic density for parallel control, state-machine, and interface functions without the resource allocation and complexity of a larger FPGA. PCB design should preserve the manufacturer's recommended power and ground distribution, place bypass capacitance close to the supply pins, and route high-speed or sensitive signals with controlled impedance where applicable. Because the verified public data identifies a CSP-56 package but does not provide a complete authoritative pin table, engineers should obtain DS311 and confirm every pin, termination, and test condition before layout release or replacement qualification. This product record combines verified distributor availability, a distributor price as of 2026-10-29, same-package CoolRunner-II alternatives, and practical selection guidance. It adds engineering context around speed grade, package constraints, programming compatibility, and qualification risk without replacing the complete manufacturer datasheet.

RFQ संपर्क
XC2C64A-7CPG56C 64-Macrocell Low-Power CPLD | AMD
XC2C64A-7CPG56C

XC2C64A-7CPG56C 64-Macrocell Low-Power CPLD | AMD

The AMD XC2C64A-7CPG56C is a 64-macrocell CoolRunner-II complex programmable logic device built on 0.18 μm CMOS technology for low-power, 1.8 V system designs. It provides 45 user I/O pins in a 56-pin CSBGA package and supports in-system programming. The family is optimized for control-plane logic, protocol adaptation, bus interfacing, industrial modules, and compact board-support designs where deterministic programmable logic is needed without the complexity of an FPGA. A CPLD is a programmable-logic semiconductor that converts Boolean equations and state-machine logic into a fixed interconnect and logic structure. Within the broader hierarchy, a CPLD is a programmable-logic device, a digital semiconductor, and a flexible alternative to mask-programmed logic. Its nonvolatile configuration allows the same board to support firmware revisions, interface options, and product variations without replacing the device. Key features of the XC2C64A-7CPG56C include 64 macrocells, 45 user I/O pins, 1.8 V operation, 1.5K logic gates, and a 0.18 μm CMOS process. The -7 speed designation corresponds to a 6.7 ns pin-to-pin delay according to the listed component description, while family literature identifies performance as fast as 4.6 ns and approximately 159 MHz. Quiescent current is listed as low as 15 A, although the current unit should be confirmed against the manufacturer datasheet before using it in a power budget. The architecture uses interconnected macrocells with a programmable AND-array and OR-array structure. This architecture favors compact synthesis of decoders, state machines, bus logic, address decoding, and interface glue logic. Its low-power 1.8 V orientation is useful in systems where the CPLD interfaces with modern low-voltage logic and consumes limited standby power. In-system programming supports configuration updates during manufacturing, test, or field maintenance. Typical applications include industrial control panels, communication adapters, sensor and actuator interfaces, instrumentation, embedded protocol bridges, and general-purpose board-support logic. The 45 available I/O pins make it appropriate for parallel data paths, control signals, and mixed external interfaces. Unlike a software processor, the CPLD executes deterministic hardware logic immediately after configuration and does not depend on firmware execution time. Designers should verify the ball assignments, power rails, configuration pins, and I/O standards against DS311 before layout release. The 56-ball CSBGA package requires careful escape routing, adequate ground distribution, and assembly-process control. Confirm the exact temperature grade, AC and DC timing limits, supported I/O voltage combinations, and power consumption under the intended workload. This page combines the AMD manufacturer data sheet, distributor listings, lifecycle cross-reference information, and application-oriented engineering guidance. It also distinguishes documented pin-for-pin replacements from broader CPLD alternatives that use different packages or architectures and therefore are not true drop-in choices.

RFQ संपर्क
XC2C64A-7CPG56I - 64-Macrocell 159MHz CPLD | AMD
XC2C64A-7CPG56I

XC2C64A-7CPG56I - 64-Macrocell 159MHz CPLD | AMD

The AMD XC2C64A-7CPG56I is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1.5K logic gates, and a maximum specified operating frequency of 159 MHz, housed in a 56-pin CSBGA package. It uses 1.8 V technology and provides a compact, nonvolatile programmable-logic platform for control, interface, glue-logic, and signal-processing designs. A CPLD is a user-programmable semiconductor that combines macrocell-based logic with a fixed internal interconnect structure. In the semiconductor hierarchy, a CPLD sits between discrete gate arrays and FPGAs: it offers predictable timing, electrically erasable nonvolatile configuration, and relatively simple design flows. The CoolRunner-II architecture provides deterministic routing and SRAM-based configuration, allowing a design to retain its programmed logic without continuous configuration refresh. The XC2C64A provides 64 macrocells and approximately 1.5K gates, making it suitable for moderate-complexity state machines, bus controllers, address decoding, protocol bridges, and board-level control functions. Its specified 159 MHz operating frequency supports timing designs where system-level propagation delay and clock constraints must remain predictable. The -7 designation identifies its speed grade, while the I suffix identifies the industrial-temperature option. The device is manufactured in 0.18 μm CMOS technology and operates from a 1.8 V core supply. Its 56-pin CSBGA package supports compact, high-density PCB layouts, but its fine-pitch ball assignment requires careful PCB design, assembly capability, and inspection. Unlike a large FPGA, the XC2C64A is intended for smaller logic functions where low device count, compact packaging, and fast configuration are more important than very high logic density. Typical uses include industrial controller logic, embedded peripheral interfacing, programmable signal conditioning, sensor aggregation, and compact embedded systems. The device can also implement boot logic, power sequencing, watchdog handling, interrupt arbitration, and communication-interface state machines alongside a host microcontroller. Its 64-macrocell capacity should be checked against the required I/O count, register usage, and logic equations during architecture selection. PCB implementation should allocate the CSBGA footprint, ball map, power planes, decoupling capacitors, and programming-interface access according to the manufacturer pin description and package drawing. Signal routing must preserve the intended clock topology, while unused inputs require appropriate treatment. Configuration should also be validated for every power state and startup sequence before the design enters production. This page combines the CoolRunner-II device characteristics, verified technical sources, lifecycle information, package considerations, and same-package replacement guidance to support faster component selection and hardware planning.

RFQ संपर्क
XC2C64A-7PC44C - 64-Macrocell 159MHz CPLD | AMD
XC2C64A-7PC44C

XC2C64A-7PC44C - 64-Macrocell 159MHz CPLD | AMD

The AMD Xilinx XC2C64A-7PC44C is a 64-macrocell CoolRunner-II complex programmable logic device with a 159 MHz performance rating, 1.8 V core supply, and a 44-pin PLCC package. It belongs to the CPLD hierarchy, combining programmable nonvolatile logic, embedded memory, and flexible I/O in a single reconfigurable device for compact control, interface, and glue-logic designs. A CPLD is a user-programmable digital logic device that combines nonvolatile configuration storage with deterministic logic structures. Unlike a mask-programmed fixed ASIC, a CPLD can be reprogrammed during development or field updates. The CoolRunner-II family also uses low-power design features and interconnected architecture to support portable equipment, industrial controls, communications equipment, and general-purpose embedded systems. The XC2C64A offers 64 macrocells for implementing combinational and sequential logic. According to the AMD CoolRunner-II XC2C64A data sheet, DS311, the device uses 0.18 µm CMOS technology and supports a 1.8 V core voltage. The -7 designation identifies the performance-grade option, while the PC44 suffix identifies the commercial-temperature 44-pin package configuration. The package is designed for surface-mount PCB assembly. The device is useful when design requirements are stable but not sufficiently large to justify an FPGA. Its macrocell-based logic and dedicated I/O structures provide a practical platform for state machines, bus arbitration, protocol bridges, keypad scanning, display control, and glue logic. Because the configuration is retained in nonvolatile memory, the implemented logic remains available after power is removed and restored. Typical implementations include industrial controller front ends, portable instrument interfaces, communications equipment, embedded control logic, and compact consumer products. Design teams can use the same 44-pin footprint for equivalent CoolRunner-II sourcing options while preserving the programmed bitstream, provided the replacement suffix and electrical conditions have been checked against DS311. Careful hardware design begins with the device pinout, power architecture, and termination requirements in DS311. Confirm all 44 package contacts, supply connections, and I/O standards on the current pin-description table before routing the PCB. Treat the configuration interface and JTAG behavior as critical design constraints because incorrect pin assignment or signal conditioning can prevent programming even when the rest of the logic is electrically correct. This page combines the device identity, manufacturer documentation, package information, sourcing references, same-footprint alternatives, and practical engineering guidance. It focuses on the decisions an engineer must make before programming or qualifying the XC2C64A-7PC44C in production equipment.

RFQ संपर्क
XC2C64A-7PCG44C - 64-Macrocell 1.8V CPLD | Xilinx
XC2C64A-7PCG44C

XC2C64A-7PCG44C - 64-Macrocell 1.8V CPLD | Xilinx

The Xilinx XC2C64A-7PCG44C is a 64-macrocell CoolRunner-II complex programmable logic device operating from a 1.8 V core supply, with a 44-pin PLCC package. The -7 speed grade provides a stated 7.5 ns propagation delay and supports operation up to 200 MHz, while the commercial-grade ordering code identifies a 0°C to 70°C operating range. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration storage, programmable logic, and dedicated I/O resources in one package. CPLDs belong to the programmable-logic-device hierarchy alongside FPGAs, but they are generally selected when short system-level timing paths, deterministic configuration behavior, and relatively simple integration are more important than very high logic capacity. The XC2C64A provides 64 macrocells and 33 I/O lines. Its 1.8 V core supply supports portable, embedded, communication, and industrial control equipment, and its nonvolatile FLASH configuration allows the programmed logic design to remain available after power is removed. The 7.5 ns speed designation supports clocked designs operating up to 200 MHz according to the product listing. Programmable logic density and I/O availability make this device suitable for bus arbitration, state machines, interface translation, control sequencing, and glue logic. Its 44-pin PLCC package reduces board area compared with larger leaded devices and provides a practical option for designs that require reworkability or socket assembly. Typical uses include industrial controllers, communications equipment, low-power embedded systems, peripheral interfaces, and general-purpose logic consolidation. JTAG boundary-scan testing supports board-level validation, while in-system programmability allows configuration and diagnostics to be integrated into a production or field-update workflow. PCB design should preserve the package pad layout, power and ground distribution, and programming interface exactly as specified in the manufacturer pinout. Decoupling capacitors should be placed close to the supply pins, and JTAG signals should be routed to remain accessible for boundary-scan testing and configuration. This page combines the manufacturer device data with package, programming, and replacement guidance, adding practical selection context for engineers who need a compact, nonvolatile CPLD rather than a higher-capacity FPGA.

RFQ संपर्क
XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx
XC2C64A-7PCG44I

XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx

The Xilinx XC2C64A-7PCG44I is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1,500 usable gates, a -7 speed grade, and 33 user I/O pins in a 44-pin VQFP package. It combines advanced CMOS programmable logic with intelligent power-management features for designs requiring compact, low-power implementation of control, interface, and glue logic. A complex programmable logic device is a programmable semiconductor that combines a structured logic architecture with nonvolatile configuration storage. In the programmable-logic hierarchy, a CPLD sits between simple fixed-function logic and an FPGA: it offers macrocell-based logic implementation, predictable interconnect delays, and retained configuration in a compact package. The XC2C64A belongs to the CoolRunner-II family, designed for both high-performance and low-power portable equipment. The device provides 64 macrocells and approximately 1,500 usable gates, with 33 user I/O pins available in the PCG44 package. The -7 suffix identifies the higher-performance speed grade. Its I/O architecture supports LVCMOS operation in 3.3 V, 2.5 V, and 1.8 V systems, while 1.5 V compatibility can be achieved by using Schmitt-trigger inputs. Intelligent power management helps reduce consumption when the device is inactive. CoolRunner-II architecture uses configurable logic blocks and dedicated interconnect resources, making routing behavior more predictable than in a general-purpose FPGA. This characteristic is useful for control logic, bus arbitration, state machines, address decoding, and peripheral glue where a modest logic capacity is sufficient but deterministic implementation remains important. The PCG44 package also supports compact board layouts where a larger FPGA would be unnecessary. Typical applications include industrial controller logic, low-power handheld equipment, communications interfaces, test and measurement systems, and embedded control subsystems. The 33 user I/O count makes the device suitable for parallel buses, status and control registers, clock distribution, and programmable signal conditioning when external fixed-function logic would otherwise consume more board area. PCB design should follow the package dimensions, exposed-pad or thermal requirements, and recommended decoupling shown in the AMD datasheet. Confirm pin assignments, voltage domains, and supported I/O standards in the pin-description table before routing. Programming must use a compatible CoolRunner-II device programmer and the appropriate design file. This page combines the XC2C64A-7PCG44I family architecture, package details, verified replacement relationships, and practical selection guidance. It also highlights the distinctions between speed grades and temperature suffixes so engineers can identify a pin-compatible replacement without overlooking device-level qualification requirements.

RFQ संपर्क
XC2C64A-7QFG48C - 64-Macrocell 1.8V CPLD | AMD
XC2C64A-7QFG48C

XC2C64A-7QFG48C - 64-Macrocell 1.8V CPLD | AMD

The AMD XC2C64A-7QFG48C is a CoolRunner-II complex programmable logic device with 64 macrocells, approximately 1.5K logic gates, a 159 MHz maximum operating frequency, and a 1.8 V supply in a 48-pin QFN package with an exposed pad. It is optimized for 1.8 V systems and combines in-system programmability with low-power operation. A CPLD is a programmable logic device that connects combinational and sequential logic blocks through a programmable interconnect. The CoolRunner-II architecture belongs to the broader hierarchy of programmable logic devices, alongside FPGAs, and is commonly used for glue logic, interface adaptation, control sequencing, and compact system-level logic. Compared with a large FPGA, the XC2C64A provides a smaller logic capacity with relatively simple configuration and predictable device organization. Key features include 64 macrocells, 37 user I/O, 4.6 ns pin-to-pin logic delay, and quiescent current as low as 15 A. The device uses 0.18 µm CMOS technology and supports a 1.8 V operating supply. Its in-system programmable architecture allows a circuit to be configured or reconfigured without removing the package from the assembled PCB, which supports production programming, prototype updates, and field-configurable logic. The CoolRunner-II implementation provides dedicated macrocell resources for registered and combinational functions. Its documented 159 MHz speed classification and 4.6 ns pin-to-pin delay suit moderate-frequency control, bus, and interface designs. Because the XC2C64A is a legacy programmable-logic product, designers should verify the programmed bitstream, I/O standards, system-level timing, and toolchain support against the current AMD design flow before committing a new production design. Typical applications include low-speed communications interface control, industrial automation modules, embedded control systems, automotive electronic subsystems, consumer equipment, and compact peripheral adapters. The 48-pin QFN exposed-pad package also makes the device suitable for space-constrained boards where a larger plastic quad flat package would be undesirable. Thermal performance depends on the exposed-pad layout, copper area, and the aggregate switching activity of the programmed logic. For PCB implementation, use the package drawing and pin-description table in the DS311 manufacturer datasheet for land patterns and signal assignments. Connect the exposed pad to the appropriate ground plane, place decoupling capacitors close to the supply pins, and keep programming and configuration interfaces away from sensitive analog or high-speed clock routing. Validate signal integrity with the actual board stack-up and the selected I/O standard. This product page consolidates the manufacturer specifications, package details, application guidance, and traceable replacement analysis for the XC2C64A-7QFG48C. It is intended to help engineers evaluate the device, confirm the exact ordering code, and plan a technically compatible design or migration path.

RFQ संपर्क
XC2C64A-7QFG48I - 64-Macrocell CoolRunner-II CPLD, 7ns | AMD/Xilinx
XC2C64A-7QFG48I

XC2C64A-7QFG48I - 64-Macrocell CoolRunner-II CPLD, 7ns | AMD/Xilinx

The AMD/Xilinx XC2C64A-7QFG48I is a 64-macrocell, 1.8V CoolRunner-II Complex Programmable Logic Device (CPLD) with 4.6 ns pin-to-pin propagation delay, housed in a 48-pin QFG (QFN) surface-mount package. The device belongs to the CoolRunner-II family, which combines low static power (~15 µA quiescent current) with non-volatile flash configuration memory and in-system programmability via IEEE 1149.1 JTAG. A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that sits between discrete glue logic and FPGAs in the programmable logic hierarchy (CPLD -> PLD -> programmable logic -> digital IC -> semiconductor). CoolRunner-II devices implement logic in function blocks based on PLA (Programmable Logic Array) sub-blocks with macrocell flip-flops, providing deterministic timing that simplifies design sign-off in glue-logic applications. Key features of the XC2C64A-7QFG48I include 64 macrocells organized as 4 logic blocks of 16 macrocells, 33 usable I/O pins (out of 37 total), 1.5K usable gates, a pin-to-pin delay of 4.6 ns at industrial temperature range, and DataGATE technology for per-pin input signal blocking to reduce dynamic power. The 0.18 µm CMOS process enables 1.8V core operation with I/O tolerance to 3.3V signals, simplifying interfacing with legacy 3.3V peripherals. The architecture combines a deterministic timing model with low-power 1.8V operation, making this CPLD well-suited for portable and battery-powered designs. The internal 1.8V VCCINT and I/O banked VCCIO supply rails permit mixed-voltage signaling without external level shifters, while the four global clock networks and per-macrocell OE controls give designers flexible clocking and bus-management options. Typical applications include portable/battery-powered consumer electronics where low quiescent current matters, industrial control I/O expansion and bus bridging (I2C, SPI, UART glue logic), and telecom infrastructure glue logic interfacing 3.3V peripherals to 1.8V processors. Designers also deploy this part in medical handheld devices and white goods motor control boards. When designing with this device, ensure the JTAG chain length and TDO load remain within specifications if multiple CoolRunner-II parts share one chain. The DataGATE feature can be disabled per pin to preserve dynamic behavior on critical paths; verify per-pin signal integrity when chaining long busses. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
XC2C64A-7VQ100C - 64-Macro-Cell 1.8V CPLD | AMD
XC2C64A-7VQ100C

XC2C64A-7VQ100C - 64-Macro-Cell 1.8V CPLD | AMD

The AMD XC2C64A-7VQ100C is a 64-macro-cell CoolRunner-II complex programmable logic device operating at 1.8 V in a 100-pin VTQFP package. The device provides 1.5K logic gates, a 159 MHz internal frequency, and a 6.7 ns propagation delay, making it suitable for compact, low-voltage programmable logic designs. A CPLD is a programmable semiconductor in the FPGA & CPLD product hierarchy. Its macro cells combine programmable AND/OR logic with dedicated interconnect, allowing a design to be configured by a programming file rather than fabricated as fixed logic. Compared with an FPGA, a CPLD generally offers simpler configuration, deterministic nonvolatile configuration storage, and predictable I/O behavior, while remaining less flexible for very large, high-performance systems. The XC2C64A belongs to the enhanced CoolRunner-II family and uses 0.18 µm CMOS technology. Its 64 macro cells and 1.5K gates provide enough resources for control logic, interface adaptation, bus decoding, state machines, and glue logic. The -7 speed designation corresponds to the listed 6.7 ns propagation-delay class, while the 100-pin VTQFP package supports surface-mount assembly and offers a conventional leaded footprint for prototype and production boards. The device is optimized for 1.8 V systems and combines low power consumption with reconfigurable logic resources. In a design, the JTAG programming interface loads the configuration data, the I/O buffers interface with external signals, and the internal macro cells implement the selected Boolean functions. Because configuration is nonvolatile, the circuit can begin operating its programmed function after power is applied without requiring a separate configuration PROM. Typical uses include industrial automation, telecommunications, consumer equipment, embedded control, and general-purpose interface bridging. Its combination of 64 macro cells, 45 listed user I/Os, and a 1.8 V core suits designs that need compact glue logic but not the routing capacity of a large FPGA. It can also serve as a lifecycle upgrade for an XC2C64 design where the manufacturer identifies the enhanced XC2C64A family as pin-for-pin compatible. PCB design should preserve the 0.50 mm lead pitch and follow the manufacturer land pattern, power, decoupling, and programming guidance in DS311. Check the selected temperature grade and device variant before release because speed, temperature, and package suffix combinations define distinct orderable parts. This page combines the CoolRunner-II architecture, package characteristics, lifecycle replacement information, drop-in candidate comparison, and practical implementation guidance to help engineers evaluate the XC2C64A-7VQ100C beyond a basic distributor parameter table.

RFQ संपर्क
XC2C64A-7VQ100I - 64-Macro-Cell 1.8V CPLD | AMD Xilinx
XC2C64A-7VQ100I

XC2C64A-7VQ100I - 64-Macro-Cell 1.8V CPLD | AMD Xilinx

AMD Xilinx XC2C64A-7VQ100I is a 64-macro-cell CoolRunner-II complex programmable logic device with 1.5K gates, a 1.8 V core, 0.18 µm CMOS technology, and a 100-pin VTQFP package. It operates at the -7 speed grade and is designed for compact, low-power programmable-logic implementations where deterministic routing, nonvolatile configuration, and a modest pin count are important. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines programmable logic and programmable interconnect. In the product hierarchy, a CPLD belongs to programmable-logic devices alongside FPGAs, while its internal macro cells are constructed from CMOS logic. Compared with an FPGA, a CPLD generally offers simpler architecture and predictable timing, making it useful for control logic, interface translation, state machines, and small mixed-logic functions. The XC2C64A provides 64 macro cells and approximately 1.5K logic gates. The -7 grade corresponds to a 159 MHz system frequency in the published family specifications, while listed performance features include a 4.6 ns pin-to-pin logic delay. The device is optimized for 1.8 V systems and uses a 0.18 µm CMOS process. Its 100-pin VTQFP package supports compact surface-mount PCB construction while exposing a larger interface than smaller 44-, 48-, and 56-pin members of the family. CoolRunner-II devices combine logic implementation with nonvolatile configuration memory, allowing a circuit to retain its programmed behavior after power is removed without external configuration flash. The XC2C64A architecture is appropriate when a design needs more logic capacity than basic fixed-function gates, but not the resource density of a larger FPGA. Its performance class should be checked against the worst-case timing path in the selected design rather than inferred only from the maximum clock figure. Typical applications include industrial control interfaces, data acquisition front ends, telecommunications interface logic, instrumentation, and embedded control systems. The 64 macro cells can implement multiple state machines, bus-interface translators, protocol converters, timing blocks, or glue logic around processors. In a mixed design, the CPLD can consolidate deterministic logic between a microcontroller and external peripherals while avoiding a larger programmable-logic footprint. For PCB implementation, use the manufacturer pinout and package drawing for the 100-pin VTQFP, and confirm the available I/O count for the selected speed-grade and package combination before assigning signals. Place decoupling capacitors close to the power and ground pins, provide a clean ground reference, and route high-speed or sensitive inputs away from switching nodes. Programming should follow the CoolRunner-II toolchain and device-identification procedure described in AMD documentation. This product record combines device-family specifications, lifecycle information, obsolete-part replacement context, and same-package upgrade or replacement options. It also highlights the trade-offs among speed grade, temperature grade, package footprint, and design qualification when selecting an alternative for an existing 100-pin board.

RFQ संपर्क
XC2C64A-7VQ44C - 64-Macrocell 6.7ns CPLD | AMD
XC2C64A-7VQ44C

XC2C64A-7VQ44C - 64-Macrocell 6.7ns CPLD | AMD

AMD XC2C64A-7VQ44C is a CoolRunner-II complex programmable logic device with 64 macrocells, a 6.7 ns maximum propagation delay, a 1.8 V internal supply, and a 44-pin VQFP package. It is a surface-mount programmable-logic IC intended for compact embedded systems that require deterministic combinational and registered logic without the resource level of an FPGA. The part uses 0.18 µm CMOS technology and belongs to the CoolRunner-II family of CPLDs. A CPLD is a programmable-logic semiconductor that combines interconnected programmable macrocells, a fixed interconnect structure, and input/output blocks. In the product hierarchy, a CPLD is a programmable-logic device and a member of the broader FPGA and CPLD category. Compared with an FPGA, this device offers a smaller, simpler architecture intended for glue logic, control logic, interface conditioning, and modest state-machine implementations. Its 64 macrocells provide substantially more logic capacity than a simple small PLD while retaining deterministic routing and a relatively compact package. The XC2C64A-7VQ44C provides 45 user I/Os according to the retrieved DigChip specifications, 159 MHz maximum operating frequency according to the Datasheets.com listing, and a 6.7 ns maximum propagation-delay figure according to the component data sheet. The -7 speed designation is associated with the 6.7 ns class, while the 1.8 V-oriented internal supply aligns with portable and embedded equipment operating from low-voltage rails. The package is identified elsewhere in the retrieved data as a 44-pin VQFP; one secondary listing inconsistently describes a 56-pin CSP, so package-specific decisions should be confirmed against the AMD DS311 document and the individual pinout drawing. The CoolRunner-II architecture is useful for bridging asynchronous interfaces, decoding control commands, implementing compact state machines, and fixing timing or protocol issues in larger processor-based designs. Its 45 user I/Os can support multiple digital control, communication, and general-purpose I/O assignments, subject to voltage, timing, and pin constraints in the DS311 data sheet. The 6.7 ns propagation-delay class is relevant for combinational control paths, while the 159 MHz frequency figure provides an upper reference for system timing evaluation. Typical uses include industrial control, embedded processor peripherals, communication interface adaptation, data-acquisition modules, and compact control systems. Designers should avoid treating the reported frequency as a universal operating frequency because achievable performance depends on the implemented logic, routing path, I/O standard, and timing constraints. The product should be programmed as an in-system programmable CPLD using a compatible Xilinx or AMD device-programming solution. When designing a replacement PCB, verify the exact package drawings, pin names, power pins, configuration behavior, and supported I/O standards against DS311 rather than relying on distributor classification alone. Ensure the board accommodates the 44-pin VQFP footprint, exposes all required programming and power connections, and provides a stable 1.8 V internal supply environment. The retrieved YIC listing states that the offered device contains lead and is RoHS non-compliant, which may matter for new production sourcing even though the individual component is listed as active.

RFQ संपर्क
XC2C64A-7VQ44I - 64-Macrocell 1.8V CPLD | AMD Xilinx
XC2C64A-7VQ44I

XC2C64A-7VQ44I - 64-Macrocell 1.8V CPLD | AMD Xilinx

The AMD Xilinx XC2C64A-7VQ44I is a 1.8 V CoolRunner-II complex programmable logic device containing 64 macrocells and approximately 1.5K logic gates in a 44-pin VTQFP package. Listed device characteristics include a 159 MHz speed designation, 45 user I/O pins, 5 ns propagation delay, and as-fast-as 4.6 ns pin-to-pin logic delay. The device uses 0.18 µm CMOS technology and is optimized for low-voltage, high-performance logic implementations. A CPLD is a programmable-logic device that integrates nonvolatile configuration memory, programmable interconnect, and logic blocks into one package. In the semiconductor hierarchy, the XC2C64A belongs to the CPLD class, which sits between fixed-function logic ICs and larger FPGAs. CoolRunner-II devices are commonly used where modest logic density, fast routing, low standby power, and relatively simple re-programming are more important than the capacity of a large FPGA. The XC2C64A provides four principal design advantages: 64 macrocells for compact multi-function logic, 45 user I/Os for external interfaces, 1.8 V operation for compatibility with low-voltage system rails, and a specified 7 speed grade for timing-oriented designs. Its advertised 5 ns propagation delay and 4.6 ns pin-to-pin delay support control logic, interface conditioning, bus arbitration, state-machine implementations, and low-to-moderate-complexity glue logic. Its 0.18 µm CMOS implementation places the part in the CoolRunner-II product generation. The listed 159 MHz frequency is distinct from the separately reported 333 MHz internal-frequency figure in distributor technical summaries, so designs should use the AMD DS311 data sheet for timing definitions and device-limit interpretation. Quiescent-current details are also inconsistent across the supplied summaries, making the manufacturer document the controlling source for final power-budget decisions. Typical uses include industrial control, communication equipment, battery-operated instruments, embedded system supervision, bus-interface logic, and general-purpose programmable glue logic. The 45 I/O count permits substantial board-level connectivity without moving to a larger programmable-logic device, while the 44-pin surface-mount package supports compact designs. Designers should verify the exact VQ44 pin mapping, supported I/O standards, bank voltage limits, and AC timing from DS311 before layout release. Because the available search summaries conflict between VTQFP-44 and a 56-pin CSP description, the package drawing and pinout should be checked against the device marking and ordering code rather than inferred from the MPN alone. This page combines verified distributor specifications, official AMD documentation, and engineering-focused guidance for XC2C64A-7VQ44I selection, timing review, layout validation, and drop-in replacement assessment.

RFQ संपर्क
XC2C64A-7VQG44C - 64-Macrocell 1.8V CPLD | Xilinx
XC2C64A-7VQG44C

XC2C64A-7VQG44C - 64-Macrocell 1.8V CPLD | Xilinx

Xilinx XC2C64A-7VQG44C is a CoolRunner-II complex programmable logic device with 64 macrocells, 4 logic blocks, 1,500 usable gates, and a maximum system frequency of 159 MHz. It uses 0.18 µm CMOS Flash technology, operates from a 1.8 V core supply, and is packaged in a 44-pin VTQFP measuring 10 mm by 10 mm. The device provides 33 user I/O pins and supports hot-swap operation for controlled insertion into a live backplane. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple logic functions into one reconfigurable device. Its hierarchy places it within programmable logic alongside FPGA and CPLD technologies, where it is especially useful for compact glue logic, protocol conversion, bus arbitration, and interface control. CoolRunner-II combines nonvolatile configuration storage with low-power operation, allowing the implemented circuit to retain its logic after power is removed. Key features include 64 macrocells distributed across 4 function blocks, up to 1,500 usable gates, and a maximum system frequency of 159 MHz. The -7 speed designation places this part in the 159 MHz performance class, while the G package code identifies the 44-pin VTQFP configuration. Input/output performance can reach a 4.6 ns pin-to-pin logic delay, and the architecture is optimized for systems operating from a 1.8 V supply. The CoolRunner-II architecture uses Xilinx RealDigital technology in a 0.18 µm CMOS Flash process. Flash-based configuration supports nonvolatile programmed logic, while the low-power design targets both high-performance and battery-operated equipment. The programmable macrocell structure provides a practical capacity for multi-function logic without the resource overhead of a much larger FPGA. Typical uses include communication-equipment interface logic, battery-powered portable systems, bus control, protocol bridging, embedded control, and general-purpose glue logic. The 33 user I/O pins are suitable for connecting the CPLD to external memory, processors, converters, and peripheral devices when the board's electrical requirements match the selected I/O standards. Designers should review the DS311 device pin table before assigning every signal, especially configuration, power, ground, and I/O pins. Validate signal timing at the intended system frequency, apply the manufacturer's recommended bypass capacitors, and observe the package-specific keep-out and thermal-pad guidance. For an existing XC2C64 design, the AMD XCN05017 notice identifies XC2C64A as the enhanced pin-for-pin replacement for the original XC2C64. This product record combines the DS311 family specifications with practical device-selection, timing, package, and migration guidance. It also distinguishes same-package speed-grade alternatives from larger-package CoolRunner-II variants, helping engineers preserve PCB compatibility while evaluating performance, temperature grade, and lifecycle constraints.

RFQ संपर्क
XC2C64A-7VQG44I - 64-Macrocell 159MHz CPLD | AMD
XC2C64A-7VQG44I

XC2C64A-7VQG44I - 64-Macrocell 159MHz CPLD | AMD

The AMD XC2C64A-7VQG44I is a 64-macrocell CoolRunner-II complex programmable logic device with a 159 MHz maximum operating frequency, 33 user I/O, and a 44-pin VTQFP package. It uses 0.18 µm CMOS technology with a 1.8 V core supply, combining programmable logic, in-system programmability, and a 6.7 ns speed designation in one compact surface-mount package. A CPLD, or complex programmable logic device, is a programmable semiconductor that converts digital logic descriptions into fixed hardware interconnections. Within the product hierarchy, the XC2C64A belongs to the CoolRunner-II family of CPLDs, joining other programmable-logic devices and FPGAs used for control, interface, glue logic, and signal-processing functions. Unlike a microcontroller, a CPLD executes configured logic directly in hardware after programming. The device provides 64 macrocells and approximately 1,500 logic gates for implementing combinational and sequential functions. Its 33 I/O pins support connections to external memory, control signals, displays, sensors, and communications circuitry. The -7 speed designation corresponds to a listed 6.7 ns propagation delay, while the 159 MHz figure describes the maximum operating frequency used when evaluating timing performance. The 0.18 µm CMOS implementation and 1.8 V core operation place the XC2C64A in the CoolRunner-II architecture designed for low-voltage, high-density programmable logic. The manufacturer data sheet also identifies the device as an in-system-programmable CPLD, allowing configuration data to be loaded through the device's programming interface while the surrounding system is operating. Typical applications include industrial control and data-acquisition modules, communications-interface logic, test equipment, embedded system support functions, display and keypad controllers, and general-purpose board glue logic. Its combination of 64 macrocells, 33 I/O, and a 44-pin package makes it useful when a design requires more logic than a small GAL or simple fuse-programmed device but does not need a larger FPGA. Designers should preserve the package's exact pin assignments in the PCB library and follow the CoolRunner-II programming, decoupling, and termination guidance in AMD document DS311. Timing closure should use the speed-grade and I/O constraints appropriate to the selected clocking scheme rather than relying only on the 159 MHz headline frequency. This page combines the manufacturer's CoolRunner-II technical information with package-aware replacement guidance, design notes, and application-focused selection criteria. These engineering resources help identify where the XC2C64A-7VQG44I fits, which same-package variants can simplify sourcing, and which design checks should be completed before layout release.

RFQ संपर्क
XC2S50E-6PQG208C - Spartan-IIE FPGA, 50K Gates, 208-PQFP | AMD
XC2S50E-6PQG208C

XC2S50E-6PQG208C - Spartan-IIE FPGA, 50K Gates, 208-PQFP | AMD

The AMD (formerly Xilinx) XC2S50E-6PQG208C is a Spartan-IIE Field Programmable Gate Array (FPGA) IC integrating 50,000 system gates, 1,728 logic cells, and 32,768 bits of block RAM in a 208-pin Plastic Quad Flat Pack (PQFP / 208-BFQFP) package with 146 user I/O pins. It is built on a 0.18 µm CMOS process, supports system performance beyond 200 MHz with internal logic capable of 357 MHz, and is offered in the -6 speed grade with 6 ns pin-to-pin logic delay. A Field Programmable Gate Array (FPGA) is a type of integrated circuit in the programmable logic family, sitting between standard logic ICs and ASICs in the semiconductor hierarchy. FPGAs contain an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory that can be reconfigured post-manufacture to implement arbitrary digital logic. The Spartan-IIE family targets cost-sensitive, high-volume applications requiring densities up to 600K system gates with the flexibility of in-system reprogrammability via SRAM configuration cells. Key features of the XC2S50E include SelectIO™ signaling supporting 18 popular I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and GTL; up to 384 CLBs (configurable logic blocks); four Delay-Locked Loops (DLLs) for clock de-skew and frequency synthesis; 32 kbit distributed RAM plus dedicated 4 kbit dual-port block RAM; and JTAG boundary-scan (IEEE 1149.1) for board-level testing. The device operates from a 2.5 V core supply with 1.5 V–3.3 V auxiliary supply for I/O flexibility. The Spartan-IIE architecture combines Lookup-Table (LUT) based logic, distributed SelectRAM, dedicated 18 kbit Block SelectRAM multipliers, and a hierarchical routing fabric. This combination is engineered for digital signal processing (DSP), glue logic, bus interfacing, and embedded control, replacing discrete TTL/CMOS logic while keeping unit cost low. Hot-swap I/O, 5 V tolerance on user I/O, and PCI 66 MHz compliance expand its applicability into mixed-voltage and legacy backplane designs. Typical applications include telecommunications bridging and aggregation, low-cost DSP front-ends, industrial control and instrumentation, video processing, set-top box interface logic, and embedded computing subsystems. The 208-PQFP with 1.0 mm lead pitch is well-suited for prototype and low-volume production where surface-mount reflow of fine-pitch BGA is undesirable. When designing with the XC2S50E-6PQG208C, ensure the 208-PQFP land pattern matches the 30.6 mm × 30.6 mm body dimensions and that decoupling follows the manufacturer reference schematic (typically 0.1 µF + 10 µF per supply rail). The ISE WebPACK toolchain supports this device and is recommended for synthesis, place-and-route, and bitstream generation. This page synthesizes distributor pricing for the lead-free commercial-grade variant, drop-in same-package speed/package alternatives, and practical design notes not consolidated on any single distributor or datasheet page.

RFQ संपर्क
XC2V1500-4FFG896C - Virtex-II 1.5M Gates FPGA | AMD/Xilinx
XC2V1500-4FFG896C

XC2V1500-4FFG896C - Virtex-II 1.5M Gates FPGA | AMD/Xilinx

The AMD (formerly Xilinx) XC2V1500-4FFG896C is a Virtex-II family Field-Programmable Gate Array (FPGA) IC integrating 1.5 million system gates, 17,280 logic cells, and 884,736 bits of block RAM in a 896-ball Flip-Chip Fine-pitch Ball Grid Array (FFG/FCBGA) package. The '4' speed grade, commercial 'C' temperature (0C to 85C), and 528 user I/O make it suitable for high-density logic prototyping, embedded processing platforms, and high-speed serial interfacing using SelectIO and RocketIO-capable I/O standards (when paired with the appropriate family member). A Field-Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that the designer can reconfigure post-manufacture to implement arbitrary digital circuits, from glue logic to full processor subsystems. Within the IC hierarchy, an FPGA sits between an ASIC and a programmable logic device (PLD/CPLD): ASICs are application-specific and fixed, CPLDs handle simpler glue logic with non-volatile configuration, and FPGAs sit above for the highest logic density and highest-speed serial I/O. Virtex-II is the Xilinx generation built on a 0.15 micrometer CMOS process with 1.5V core, introducing dedicated 18x18 hardware multipliers and block RAM tiles tuned for DSP and datapath acceleration. Key parameters worth highlighting: 1.5 million system gates (a marketing-derived gate count), 17,280 logic cells, 1,920 Configurable Logic Blocks / CLBs (the 17,280-cell / 1920-LAB count matches Virtex-II datasheet convention), 884,736 bits of embedded block RAM organized into selectable 18-Kbit blocks, and 528 user I/O pins distributed across the package perimeter. The device supports configuration via SelectMAP, JTAG (IEEE 1149.1), and serial modes, with on-chip clock management through eight Digital Clock Managers (DCMs). Architecturally, Virtex-II uses a symmetrical array of CLBs each containing four slices, each slice carrying two 4-input Look-Up Tables (LUTs), dedicated carry logic for fast arithmetic, and distributed SelectRAM. The hard IP blocks of 18x18 multipliers and 18-Kbit block RAMs allow DSP and buffering functions to run at hundreds of MHz without consuming general logic resources. Typical applications include high-throughput data acquisition front-ends, telecom baseband processing (3G and early LTE line cards), broadcast video processing, avionics prototype platforms (mil/aero-grade variants exist but the -4 C grade is commercial), and ASIC prototyping shells. The 528 I/Os and large logic capacity also suit test-and-measurement backplanes. Designers should be aware that this part is now classified Obsolete (EOL) in the supply chain; long-term designs should consider Virtex-4, Virtex-5, or current Kintex 7-series equivalents from AMD/Xilinx, while PCN documentation must be reviewed for any in-production designs. Power estimation should be performed pre-layout using the Xilinx Power Estimator (XPE) because the VQFN-style multi-rail FCBGA demands a substantial decoupling network and a thermal solution capable of sustaining typical Virtex-II junction profiles. This page synthesizes distributor inventory from DigiKey, parametric data from the manufacturer Virtex-II datasheet, and practical pin-compatibility notes not bundled into the bare datasheet PDF.

RFQ संपर्क