उत्पाद (44,000+)

MPC8533VTAQGA - PowerQUICC III 1GHz MPU | NXP
MPC8533VTAQGA

MPC8533VTAQGA - PowerQUICC III 1GHz MPU | NXP

The NXP MPC8533VTAQGA is a PowerQUICC III communications processor featuring an e500v2 core running at up to 1.0 GHz, housed in a 783-pin FCBGA (Flip-Chip Plastic Ball Grid Array) package measuring 29 mm x 29 mm. Built on a 90 nm process, the device integrates a single 32-bit Power Architecture core, DDR1/DDR2 memory controllers, dual 10/100/1000 Mbps Ethernet MACs, PCI Express, PCI, and a USB interface for high-performance networking interworking. What is a PowerQUICC processor? A PowerQUICC (pronounced "power-quik") processor is a system-on-chip (SoC) family that combines a Power Architecture CPU core with specialized communication peripherals (often called Communication Engine Modules, or CPMs). The PowerQUICC III generation, of which the MPC8533 is a member, targets enterprise networking, broadband access, and storage applications, and sits in the broader taxonomy: SoC -> communications processor -> networking SoC -> PowerQUICC family. The MPC8533 is the Ethernet/PCIe-focused variant, optimized for cost and power efficiency versus higher-end PowerQUICC III derivatives that add additional TDM or SerDes lanes. Key differentiating specifications include: 1.0 GHz CPU speed on the e500v2 32-bit core, 783-ball FCBGA with 29x29 mm body, multi-rail supply at 1.8 V / 2.5 V / 3.3 V, integrated DDR/DDR2 memory controller, and dual Gigabit Ethernet MACs. The part is offered in an industrial/extended-temperature grade that operates from 0C to 90C junction, with the part suffix AQGA identifying the specific speed, temperature, and packaging option. Architecturally, the MPC8533 leverages the e500v2 core with enhanced Book-E instruction set support, integrated L1 caches, and a 256 KB or larger on-chip L2 configuration. The block design separates the CPU core from the I/O subsystem, allowing the packet-processing and DMA engines to handle Ethernet frames independently, which is the principal advantage of the PowerQUICC III architecture over a pure compute-centric MPU. Typical applications include enterprise routers, broadband gateways, line cards in multiservice access platforms, Ethernet-to-PCIe interworking bridges, NAS controllers, and industrial control. The dual GbE plus PCI/PCIe combination is particularly suited for headless or control-plane designs where the SoC operates as the network interface + management controller combined. When designing with this device, allocate adequate PCB layers (typically 8+ layer stack-up) for FCBGA breakout, ensure decoupling covers the multi-rail (1.8V/2.5V/3.3V) requirements per the reference manual, and plan for JTAG and boundary-scan test access. This page synthesizes distributor pricing, drop-in alternatives, and design guidance not found on a single datasheet source.

RFQ संपर्क
MPC8533VTARJA - 1.067GHz e500v2 PowerQUICC III MPU | NXP
MPC8533VTARJA

MPC8533VTARJA - 1.067GHz e500v2 PowerQUICC III MPU | NXP

The NXP MPC8533VTARJA is a PowerQUICC III communications processor built around the PowerPC e500v2 core, running at up to 1.067 GHz with a 32-bit architecture, integrated in a 783-pin FCBGA (29x29) package. It combines a high-performance CPU subsystem with peripheral controllers including DDR1/DDR2 memory, PCI/PCIe, Gigabit Ethernet, and USB 2.0 interfaces for embedded networking and interworking designs. A microprocessor (MPU) is an integrated circuit that fetches, decodes, and executes instructions of a program stored in external memory. The MPC8533VTARJA belongs to the broader category of embedded microprocessors -> communication processors -> system-on-chip (SoC) -> integrated circuits. PowerQUICC III devices evolved from Freescale's (now NXP) PowerQUICC II line, adding deeper pipelining, an integrated security engine option, and high-speed serial interfaces such as PCIe and Serial RapidIO. Key features of this part include a single e500v2 core with dual-issue superscalar execution, hardware tablewalk for virtual memory, and an integrated DDR memory controller supporting DDR1 and DDR2 SDRAM. The device integrates a 32-bit/64-bit PCI controller, a x1/x2/x4 PCIe interface, a triple-speed 10/100/1000 Ethernet MAC, USB 2.0 high-speed with on-chip PHY, and an Enhanced Local Bus controller for NAND/NOR flash and SRAM. Operating voltages are 0.95 V to 1.05 V core, 1.8 V DDR, 2.5 V Ethernet/PCIe, and 3.3 V I/O, with a 0 to 90 C commercial temperature grade. Architecturally, the e500v2 core implements Book-E architecture extensions with a seven-stage pipeline and dual-issue out-of-order execution. The platform runs from a 32-bit system bus and integrates DMA engines, interrupt controllers, and four channelized serial interfaces (TDM/Hdlc/HDLC). The Rev 2.1 silicon revision improves power consumption and adds errata fixes documented in NXP errata documents. Typical applications include enterprise networking routers and switches, multi-function printers, IP-PBX systems, industrial control gateways, network-attached storage controllers, and PCIe endpoint cards requiring an integrated host CPU. The 783-FCBGA package is targeted at high-layer-count PCBs with controlled-impedance routing for DDR and PCIe lanes. When designing with the MPC8533VTARJA, ensure the PCB supports 1.067 GHz CPU clock distribution, DDR2-533 memory layout with matched trace lengths, and decoupling capacitors placed adjacent to each core voltage domain. Use NXP's U-Boot or CodeWarrior initialization sequences and follow the hardware specification for power sequencing to avoid latch-up. This page consolidates verified distributor pricing, drop-in PowerQUICC III alternatives, and practical PCB/thermal design notes that are not gathered in a single view in the manufacturer datasheet.

RFQ संपर्क
MPC8533VTARJA557 - PowerQUICC III 1.067GHz MPU | NXP | Networking SoC
MPC8533VTARJA557

MPC8533VTARJA557 - PowerQUICC III 1.067GHz MPU | NXP | Networking SoC

The NXP (formerly Freescale) MPC8533VTARJA557 is a PowerQUICC III MPC85xx family microprocessor integrating a PowerPC e500v2 core running at up to 1.067 GHz, packaged in a 783-ball FC-PBGA (29x29 mm). The device is a 32-bit system-on-chip (SoC) targeted at networking and communications infrastructure, combining CPU compute, integrated peripherals, and on-chip memory controllers in a single package. A microprocessor in the MPC8533 family is a high-integration Power Architecture (PowerPC) communications processor that blends a general-purpose RISC compute engine with dedicated I/O and protocol acceleration blocks. The e500v2 core implements the Book-E embedded architecture with a 32-bit datapath, MMU, and hardware virtualization support; it sits within a broader taxonomy of Power Architecture devices -> communications processors -> SoCs -> microprocessors -> ICs. The MPC8533 specifically belongs to the PowerQUICC III lineage, a NXP platform that has historically dominated wired networking designs such as routers, switches, DSLAMs, and base-station control-plane modules. Key features include a 32-bit 1.067 GHz e500v2 core, integrated DDR1/DDR2 memory controller, dual GbE MACs, PCI Express and PCI interfaces, a Security Engine block, and on-chip SRAM. The SoC supports multi-protocol serial RapidIO, UART, I2C, SPI, and USB peripherals, and is offered with extended temperature grades. Its 783-ball FC-PBGA package exposes the full peripheral set while providing a thermal envelope suitable for industrial and carrier-grade equipment. The MPC8533VTARJA557 is built on a 90 nm CMOS process with a 0.95 V to 1.05 V core voltage and 1.8V/2.5V/3.3V I/O. Internal coherency, an L2 cache with ECC, and the RapidIO fabric deliver low-latency data movement needed for line-card packet processing. Compared with the lower-pin-count MPC8536 and MPC8544, the 8533 emphasizes integration of the security and DMA engines for compact line-card designs. Typical applications include managed Ethernet switches, multiservice routers, edge routers, DSLAM line cards, wireless base-station controllers, and industrial control-plane modules. Designers leverage the integrated DDR2 controller to lower BOM cost and PCB complexity versus discrete CPU-plus-memory solutions. When designing with this device, allocate at least four PCB layers with dedicated power and ground planes for the 783-ball BGA, and follow NXP's AN-2582 layout recommendations for high-speed DDR2 routing and SerDes signal integrity. Thermal analysis must consider the worst-case core power at 1.05 V to size copper pours and any optional heatsink for sealed enclosures. This page synthesizes NXP MPC8533 family documentation, distributor pricing, and drop-in package alternatives not consolidated in the manufacturer datasheet alone.

RFQ संपर्क
MPC8535AVJANGA - PowerQUICC III 800MHz SoC MPU | NXP
MPC8535AVJANGA

MPC8535AVJANGA - PowerQUICC III 800MHz SoC MPU | NXP

The NXP MPC8535AVJANGA is a PowerQUICC III integrated communications processor based on the e500 Power Architecture core, delivering up to 800 MHz of complex application processing performance in a 783-pin FC-PBGA package measuring 29 mm x 29 mm. It integrates an e500 processor core with enhanced peripherals and high-speed interconnect technology to balance CPU performance with I/O throughput for IP network and advanced media processing applications. A PowerQUICC III SoC is a system-on-chip that combines a Power Architecture processor core with dedicated communications engines and rich peripheral IP, bridging general-purpose compute with packet processing and high-speed serial I/O. It sits in the product hierarchy MPU -> microprocessor -> integrated processor -> SoC -> semiconductor, and is widely deployed in networking and telecom equipment where deterministic throughput and integrated memory and I/O controllers reduce bill-of-materials cost. Key features include hardware support for DDR2/DDR3 memory with ECC, integrated SDHC, PCI and PCI Express interfaces, SATA, Gigabit Ethernet, USB 2.0, and an IEEE 1149.1 JTAG boundary-scan interface. The device is fabricated in a 90 nm copper CMOS process and supports core voltages of 1.5 V, 1.8 V, 2.5 V, and 3.3 V with industrial temperature grade 0 C to 90 C. According to the NXP product brief, the MPC8535E targets routers, switches, wireless base stations, and industrial imaging or printing applications that require gigahertz-class processing. The architecture pairs the e500 superscalar core with a high-bandwidth system bus and dedicated DMA and security accelerators, allowing wire-speed packet handling on GbE and PCI Express ports. The integrated memory controller supports up to DDR3 with ECC for high-availability systems, and the on-chip peripherals expose multiple RGMII/SGMII Ethernet paths plus USB and SATA ports for storage and peripheral attachment. Typical applications include enterprise and SMB routers, multi-layer switches, network attached storage, wireless base-station control-plane processing, and industrial automation controllers. The combination of Power Architecture compatibility and integrated SerDes-based I/O makes it a long-life workhorse for embedded networking designs. When designing with this device, ensure proper PCB stack-up for the 783-ball FC-PBGA, provision adequate bulk decoupling around the DDR memory interface, and follow the reference schematics in the NXP hardware specifications document. JTAG boundary scan via IEEE 1149.1 is strongly recommended for production board test. This page consolidates NXP datasheet specifications, distributor availability, and drop-in compatible alternatives for engineers sourcing the MPC8535AVJANGA in long-life or last-time-buy programs.

RFQ संपर्क
MPC8535AVTANGA - PowerPC e500 MPU 800MHz | NXP | Networking SoC
MPC8535AVTANGA

MPC8535AVTANGA - PowerPC e500 MPU 800MHz | NXP | Networking SoC

The NXP (formerly Freescale) MPC8535AVTANGA is a PowerPC e500 microprocessor from the PowerQUICC III MPC85xx family, integrating a single e500 core running at 800 MHz with a 32-bit Book E architecture, packaged in a 783-ball FCPBGA (29x29 mm). It is designed for IP network and advanced media processing applications requiring gigahertz-class complex processing with high-speed connectivity, supporting DDR2/DDR3 memory, SDHC, PCI/PCIe, SATA, GbE and USB interfaces. A microprocessor (MPU) is an integrated circuit that contains the arithmetic logic unit, control unit, registers and primary cache memory of a computer system on a single die. Embedded MPUs such as the MPC8535AVTANGA extend this model with on-chip peripherals, security engines and communications controllers so that a system can be built around one chip plus memory and analog components. Within the broader taxonomy, this part sits under the categories microprocessor -> embedded processor -> SoC -> semiconductor. It is a member of the PowerQUICC III family, which evolved PowerQUICC II devices by replacing the CPM with an enhanced QUICC Engine block for line-rate packet processing. The MPC8535AVTANGA integrates a DDR2/DDR3 memory controller with ECC, a security engine, four GbE MACs with SGMII support, two PCIe controllers, two SATA controllers, USB 2.0 (host/device/OTG), an SDHC controller, dual I2C, DUART, SPI, GPIO and a Local Bus controller. The device implements a high-bandwidth interconnect fabric that links the e500 core, L2 cache and these peripheral blocks. The 783-ball FCPBGA package is a flip-chip ball grid array with 29x29 mm body, requiring controlled-impedance PCB design and BGA assembly capability. Typical applications include industrial routers and switches, network attached storage (NAS), secure VPN gateways, factory automation controllers, multi-function printers, IP-PBX systems and industrial IoT gateways. The integrated four-port GbE switch and QUICC Engine make the part particularly suited to mid-range networking appliances where deterministic wire-speed forwarding is required alongside a Linux or VxWorks application stack. When designing with the MPC8535AVTANGA, designers must allocate BGA escape routing on at least 6 inner PCB layers and observe DDR2/DDR3 signal-integrity routing rules including matched-length address/command traces, fly-by topology for clocking, and proper VREF decoupling. Thermal design requires evaluation of the theta_JA value and consideration of airflow for industrial 0 to 90C ambient operation. This page synthesizes distributor pricing, cross-reference information, and design considerations from the NXP MPC8535 PowerQUICC III datasheet and manufacturer reference documentation, providing practical guidance not found in the standalone datasheet.

RFQ संपर्क
MPC8535AVTAQG - PowerPC e500 1GHz MPU | NXP Semiconductors
MPC8535AVTAQG

MPC8535AVTAQG - PowerPC e500 1GHz MPU | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) MPC8535AVTAQG is a PowerPC e500-based microprocessor IC belonging to the MPC85xx PowerQUICC III family, delivering 1.0 GHz core clock speed with 32-bit processing in a 783-pin FCPBGA (29x29) package. It integrates a single high-performance e500 core implementing Power Architecture technology with 36-bit physical addressing, paired with integrated memory and I/O controllers for embedded compute and networking workloads. Key specifications include a 1.0 GHz core frequency, 32-bit PowerPC e500 architecture, support for multiple supply voltages (1.5V, 1.8V, 2.5V, 3.3V rails depending on peripheral interface), and 36-bit physical address capability enabling large memory mapping. The device is fabricated in a 0.09um process node per manufacturer datasheet figures, balancing speed and power in a single SoC-style integrated processor. Key features distinguishing this part include integrated security acceleration, DDR memory controller support, multiple Gigabit Ethernet MACs, PCI Express interfaces, and serial RapidIO. The 783-ball FCBGA package provides the high-density interconnect required for the parallel address/data buses and multiple I/O lanes. Operating temperature spans industrial grades per the AVTAQG speed bin designation. Typical applications include network routers, industrial control equipment, secure networking appliances, and embedded computing platforms requiring a PowerPC-class CPU with hardware offload engines. The integrated communications peripherals reduce bill-of-materials cost versus multi-chip designs. When designing with the MPC8535AVTAQG, ensure the PCB supports the 783-ball BGA land pattern with appropriate via-in-pad or microvia stackup. Multiple voltage rails require sequenced ramp-up; consult the manufacturer reference manual for power management firmware and memory controller calibration procedures. This page synthesizes distributor inventory status, datasheet excerpts, drop-in alternative MPNs, and practical BGA-layout design notes not consolidated in the manufacturer datasheet. Pricing references are quoted as of 2026-10-16 from distributor data.

RFQ संपर्क
MPC8535AVTATHA - PowerQUICC III e500 MPU 1.25GHz 783-FCBGA | NXP
MPC8535AVTATHA

MPC8535AVTATHA - PowerQUICC III e500 MPU 1.25GHz 783-FCBGA | NXP

The NXP (formerly Freescale) MPC8535AVTATHA is a PowerQUICC III integrated communications processor built around a Power Architecture e500 core running at up to 1.25 GHz, housed in a 783-ball FCBGA package (29x29 mm). It is the non-crypto (non-E) variant of the MPC8535E family and is designed for complex application processing with high-speed connectivity including DDR2/DDR3 memory controllers, dual GbE, PCI Express, SATA, SDHC, and USB interfaces. A PowerQUICC processor is a system-on-chip (SoC) family that integrates one or more Power Architecture CPU cores with communications peripherals (Ethernet, ATM, HDLC, TDM) on a single die, targeting networking, telecom, and industrial control equipment. Within NXP's broader taxonomy it sits under MPC85xx -> communications processors -> application processors -> Power Architecture SoCs. The MPC8535 specifically targets mid-range routers, switches, and line cards where deterministic performance and rich I/O matter more than raw compute. Key features include a 32-bit e500 core with MMU and dual-issue pipeline, integrated 36-bit DDR2/DDR3 memory controller with ECC support, two Gigabit Ethernet MACs, two PCI Express controllers, two SATA 2.0 ports, integrated security acceleration, and a flexible local bus controller. The device also includes dual USB 2.0 ports with PHY, SDHC host controller, four I2C controllers, and four UARTs for management and debug interfaces. The MPC8535 uses a 512 KB L2 cache shared by the core and the integrated peripherals, with coherency maintained by hardware. The platform is supported by NXP/U-Boot/Linux BSP and is widely deployed in long-lifecycle industrial and networking products because of its stable silicon revision and 0 to 90C commercial temperature range. Engineers typically pair it with DDR3 ECC memory, a Vitesse/Marvell Ethernet PHY, and a NOR/NAND flash for boot storage. Typical applications include branch-office routers, industrial gateways, network-attached storage controllers, factory-floor protocol converters, and telecom edge equipment. The wide I/O mix lets a single MPC8535 replace an external northbridge plus multiple companion chips. The 'V' suffix indicates the 0 to 90C commercial temperature grade and a specific die revision. When designing with this device, allocate 4-layer minimum PCB with continuous reference planes for the DDR3 interface; the 783-ball FCBGA demands 1.0 mm pitch BGA routing and microvia stackups. Thermal design should target 8-12 W typical dissipation with a top-side heat spreader or heat sink attached to the lid. Decoupling follows NXP's reference design with bulk + ceramic caps at every supply pin and a dedicated PLL supply filter. This page synthesizes current distributor stock and pricing, pin-compatible MPC8535/MPC8536 family variants, and practical board-design notes not always consolidated in the NXP datasheet.

RFQ संपर्क
MPC8535BVJANGA - PowerQUICC III SoC MPU 800MHz e500 | NXP
MPC8535BVJANGA

MPC8535BVJANGA - PowerQUICC III SoC MPU 800MHz e500 | NXP

The NXP MPC8535BVJANGA is a PowerQUICC III integrated communications processor combining a Power Architecture e500 core running at 800 MHz with a rich peripheral set including DDR2/DDR3 memory controllers, SDHC, PCI/PCI Express, SATA, Gigabit Ethernet and USB 2.0 interfaces, housed in a 783-ball FCBGA (29 mm x 29 mm) package. It is intended for industrial-temperature (0C to 105C) operation and is qualified for complex IP-network and advanced media-processing workloads. A communications SoC MPU like the MPC8535BVJANGA belongs to the broader category of integrated microprocessors (MPUs), which are single-chip computing platforms that combine one or more processor cores, memory controllers and on-chip peripherals. In the system hierarchy it sits above discrete microcontrollers by integrating northbridge-class memory and I/O subsystems, and below dedicated ASICs by remaining programmable through firmware and operating-system stacks such as VxWorks, Linux and Green Hills INTEGRITY. Key specifications include a 32-bit e500 core with double-precision FPU, 32 KB/32 KB L1 instruction/data caches, integrated L2 cache up to 256 KB, a 64-bit DDR2/DDR3 SDRAM controller with ECC, four Gigabit Ethernet MACs (two SGMII, two RGMII) plus a 10/100 MAC, two PCI/PCI-X interfaces, one PCI Express x4 (configurable as four x1 lanes) and a SATA host controller. Other features include a USB 2.0 device/host PHY, SDHC, SPI, DUART, I2C and enhanced local bus. The architecture leverages a system-on-chip interconnect that allows concurrent DMA and packet processing without burdening the e500 core. Hardware acceleration blocks for table lookup, CRC and queue management offload typical datapath tasks, leaving the core available for control-plane and management software. Typical application areas are industrial Ethernet routers and switches, network-attached storage controllers, secure gateways, wireless infrastructure baseband cards and factory-automation controllers requiring deterministic networking with deterministic memory latency. When designing with the MPC8535BVJANGA, ensure a 6-layer minimum PCB with dedicated power and ground planes for the FCBGA, follow NXP's reference-design DDR3 termination and routing guidance, and provision for a JTAG/COP header for code debug. The 0C-to-105C industrial temperature grade simplifies thermal design for convection-cooled enclosures. This page consolidates distributor stock, drop-in alternatives within the same 783-FCBGA footprint, and engineering guidance that goes beyond the manufacturer product page.

RFQ संपर्क
MPC8535BVTAKG - PowerQUICC III 600MHz MPU 783-FCBGA | NXP
MPC8535BVTAKG

MPC8535BVTAKG - PowerQUICC III 600MHz MPU 783-FCBGA | NXP

The NXP (formerly Freescale) MPC8535BVTAKG is a PowerQUICC III integrated processor (MPU) based on the PowerPC e500 core, running at 600 MHz in a 783-ball FCBGA package (29x29 mm, 1 mm pitch). It targets industrial PowerQUICC III networking and embedded control applications requiring deterministic e500 processing, integrated peripherals, and a long-life FCBGA roadmap. Background knowledge: an MPU (Microprocessor Unit) is a class of processor IC that integrates one or more CPU cores, caches, memory controllers, and a fabric of high-speed serial and parallel peripherals on a single die. PowerQUICC III is NXP/Freescale's long-running PowerPC e500-based MPU family optimized for networking, industrial control, and storage. Within the broader taxonomy, MPC8535 sits below general-purpose application processors (e.g., Layerscape LS1021A) but above microcontrollers in compute and peripheral integration: MPU -> embedded processor -> PowerQUICC III -> MPC8535 specific SKU. Key features include a 32-bit PowerPC e500 core at 600 MHz core frequency, integrated L1/L2 cache hierarchy, a 783-ball FCBGA industrial-grade package, and 1 V core voltage. The processor integrates common embedded peripherals (DDR memory controller, Ethernet MACs, PCI Express, local bus, I2C, SPI, UART) typically needed for industrial routers, line cards, and machine controllers. The -40C to +105C extended industrial temperature range supports deployment in telecom and industrial environments. Technical depth: the e500 core includes a double-precision FPU, a memory management unit, and a Book-E hypervisor-aware architecture. Compared to earlier MPC85xx devices, the MPC8535 family typically uses a more integrated peripheral set while keeping the same PowerPC instruction set, easing customer code reuse. Process technology for this die is in the 90 nm/130 nm-class PowerQUICC III generation, balancing leakage and performance for embedded workloads. Typical applications include industrial Ethernet switches, line-card controllers, machine controllers, secure networking appliances, and telecom edge equipment. The 600 MHz e500 core provides deterministic throughput for packet processing and control loops, while the FCBGA package offers adequate thermal headroom with proper PCB layout. Design consideration: at full 600 MHz the device dissipates several watts; a multi-layer PCB with continuous power-plane stitching under the FCBGA and a heat spreader or heatsink is required for reliable operation at elevated temperatures. Boot configuration, reset sequencing, and JTAG access must follow the MPC85xx hardware specifications reference manual. This page synthesizes distributor pricing, parametric data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
MPC8535BVTAKGA557 - PowerQUICC III e500 MPU, 600MHz, 783-FCPBGA
MPC8535BVTAKGA557

MPC8535BVTAKGA557 - PowerQUICC III e500 MPU, 600MHz, 783-FCPBGA

The NXP (formerly Freescale) MPC8535BVTAKGA557 is a PowerQUICC III MPC8535 PowerPC e500 microprocessor IC integrating a single core running up to 600 MHz, packaged in a 783-ball FCPBGA (29x29 mm). It is positioned as a highly integrated system-on-chip (SoC) for networking, telecom, and industrial applications, combining processing, memory control, and high-speed connectivity on a single die. A PowerQUICC III processor is a PowerPC-based communications processor that traditionally combines a high-performance CPU core with a System-on-Chip peripheral set optimized for packet processing and bus mastering. Within the broader taxonomy, it sits under microprocessor -> MPU -> embedded processor -> SoC -> semiconductor. PowerQUICC III derivatives such as the MPC8535 specifically target cost-sensitive IP network equipment, balancing gigahertz-class compute with integrated GbE, PCI Express, SATA, USB, DDR2/DDR3 memory controllers, and SDHC peripherals for compact BOM designs. Key specifications of the MPC8535BVTAKGA557 include a 32-bit PowerPC e500 core at up to 600 MHz, DDR2/DDR3 memory controller support, integrated GbE, SATA, USB, SDHC, and PCI/PCIe interfaces, and a 0 to 105 °C commercial operating temperature range. The non-E variant shown here does not include security acceleration, distinguishing it from the MPC8535E derivatives that add encryption engines; the trailing "BV" prefix marks the 600 MHz speed bin with the commercial temperature grade. Architecturally, the MPC8535BVTAKGA557 uses a 32-bit PowerPC e500 core backed by L1 caches and an L2 cache controller, with the SoC peripherals routed through on-chip buses. This design delivers gigahertz-class complex application processing with exceptional feature integration and high-speed connectivity for IP networking and advanced media-handling tasks, while preserving software compatibility across the PowerQUICC III family for reuse of existing BSPs and reference designs. Typical applications include wired networking routers, switches, and IP gateways; industrial control and factory automation controllers; secure (non-E) embedded compute modules; and telecom access equipment where integrated GbE, SATA, and DDR2/DDR3 support simplify board design. The wide peripheral mix also makes the device suitable for printer/imaging controllers and digital media adapters that benefit from PowerPC software ecosystems. When designing with the MPC8535BVTAKGA557, engineers should pay attention to PCB power sequencing, DDR2/DDR3 signal-integrity routing (controlled-impedance, length-matched pairs), and proper thermal management of the 29x29 mm BGA; reference designs and validated BSPs are available from NXP/Freescale to reduce development time. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single engineering reference for sourcing and selection decisions.

RFQ संपर्क
MPC8535BVTANGA - PowerQUICC III e500 MPU 800MHz FCBGA-783
MPC8535BVTANGA

MPC8535BVTANGA - PowerQUICC III e500 MPU 800MHz FCBGA-783

The NXP (formerly Freescale) MPC8535BVTANGA is a PowerQUICC III integrated communications processor featuring an e500 Power Architecture core running at 800 MHz, housed in a 783-ball FCBGA package measuring 29 x 29 mm. It integrates DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, Gigabit Ethernet, and USB interfaces for high-performance networking and embedded applications, and is rated for the commercial 0 to 105 C operating range. What is a PowerQUICC processor? The PowerQUICC family (pronounced 'power-quic') is NXP's line of communications processors that integrate a Power Architecture CPU core with a Communications Processor Module (CPM) and rich high-speed peripheral set on a single die. The architecture sits within the broader taxonomy of integrated circuits: MPU -> microprocessor -> SoC -> communications processor -> embedded networking SoC. PowerQUICC III specifically targets gigabit-class networking equipment where deterministic protocol handling must coexist with general-purpose application processing. The e500 core delivers 800 MHz of integer performance with a 32-bit Book E instruction set, dual-issue superscalar pipeline, and hardware MMU. The device integrates 256 KB of L2 cache (configurable), DDR2/DDR3 memory controller with ECC support, three Gigabit Ethernet controllers (two SGMII/RGMII plus one RGMII), dual SATA 2.0 ports, USB 2.0 (host/device), three PCI/PCIe controllers, SDHC, I2C, SPI, UARTs, and a local bus controller. Integrated security features include SEC 3.0 crypto acceleration on the MPC8535E variant. Typical use cases include enterprise routing and switching line cards, industrial control gateways, networked printers, multi-function peripherals, secure access concentrators, factory automation controllers, and military/aerospace embedded systems requiring high I/O bandwidth. The integrated DDR2/DDR3 controller plus multiple gigabit Ethernet MACs make it well suited for line-rate packet processing at the network edge. When designing with the MPC8535BVTANGA, note that this is the 'non-E' (no SEC crypto engine) variant - choose the MPC8535E for hardware-accelerated IPsec/SSL. The 783-ball FCBGA requires multilayer PCB with microvia stack-ups and matched-impedance routing for the DDR and SERDES interfaces. Power sequencing of the multiple voltage rails (core, DDR, I/O) must follow the datasheet reference design to avoid latch-up. This page synthesizes distributor pricing, package-level compatibility notes, and design guidance not present in the standalone manufacturer datasheet, helping procurement and hardware teams shorten evaluation cycles for the PowerQUICC III platform.

RFQ संपर्क
MPC8535BVTANGA557 - PowerQUICC III 800MHz SoC | NXP Semiconductors
MPC8535BVTANGA557

MPC8535BVTANGA557 - PowerQUICC III 800MHz SoC | NXP Semiconductors

The NXP Semiconductors MPC8535BVTANGA557 is a PowerQUICC III integrated communications processor built on the Power Architecture e500 core, delivering 800 MHz complex application processing performance in a 783-ball FCBGA (29x29 mm) package. It integrates a high-performance CPU, DDR2/DDR3 memory controller, dual GbE, PCI/PCIe, SATA, SDHC, and USB interfaces into a single system-on-chip, targeting wired and embedded networking applications. An MPU (microprocessor unit) is the CPU-centric engine of an embedded system. PowerQUICC III represents NXP's evolution of the PowerQUICC II family, scaling from 667 MHz up to 1.5 GHz while adding hardware-accelerated networking, security offload, and high-speed serial interfaces. Within the broader hierarchy, MPC8535 sits as a mid-tier member of the PowerQUICC III lineup: PowerQUICC III -> PowerQUICC family -> Power Architecture SoC -> microprocessor -> semiconductor. Key features include the e500 32-bit core with Book-E MMU and dual-issue pipeline, integrated L1/L2 caches, hardware cryptography acceleration, dual 10/100/1000 Ethernet MACs, dual PCI/PCIe controllers, SATA II port, USB 2.0 host/device, SDHC, dual I2C, DUART, GPIO, and a 64-bit DDR2/DDR3 SDRAM controller with ECC. The device supports industrial temperature grade 0 to 105 C, making it suitable for fanless networking and telecom equipment. The architecture combines a complex application processor with the QUICC Engine technology block, offloading packet processing, ATM, and HDLC/PPP workloads from the e500 core. This heterogeneous design lets the MPC8535 act as both control-plane CPU and data-plane engine in a single chip, reducing BOM count versus discrete CPU+ASIC solutions. The integrated SEC 2.0 block accelerates DES/3DES/AES/SHA, offloading IPSec and MACsec from software. Typical applications include industrial routers, network switches, security gateways, networked printers, industrial control with Ethernet connectivity, and embedded Linux/VxWorks appliances. The wide peripheral set and dual GbE also suit it for factory automation gateways and small-business NAS/SAN appliances. When designing with this device, allocate adequate PCB area for the 783-ball FCBGA - a minimum 4-layer board with continuous GND/VCC planes is recommended for signal integrity. Use matched-length routing for DDR3 and Ethernet MDI pairs, and follow the NXP hardware design guide for decoupling, which specifies bulk ceramic and polymer capacitors across all power rails. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
MPC8535EAVTATH - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP
MPC8535EAVTATH

MPC8535EAVTATH - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP

The NXP (formerly Freescale) MPC8535EAVTATH is a PowerPC e500 microprocessor IC from the MPC85xx PowerQUICC III family featuring a single 32-bit core running at 1.25 GHz in a 783-pin FCPBGA (29x29) package. It integrates the e500 system-on-chip architecture with hardware cryptography acceleration, DDR memory controller, and high-speed serial interfaces for embedded networking applications. The device operates from multi-rail voltages of 1.0V (core), 1.5V, 1.8V, 2.5V, and 3.3V (I/O) to support mixed-voltage system designs. An MPU (microprocessor unit) is the central processing element of an embedded system, integrating CPU core, caches, memory controllers, and I/O peripherals on a single die. Within the broader taxonomy, an MPU sits above microcontroller units (MCUs) in processing capability but below application processors in computational throughput; the MPC85xx family specifically targets networking and communications infrastructure, bridging routers, base-station controllers, and industrial control. PowerQUICC III architecture integrates communications peripherals alongside the e500 core, reducing system BOM while delivering deterministic performance for packet processing. Key features of the MPC8535EAVTATH include the e500 core with dual-issue pipeline, integrated L1/L2 cache hierarchy, four SerDes lanes for Gigabit Ethernet or PCI Express connectivity, DDR/DDR2 memory controller, and dedicated security engine for IPsec, SSL/TLS, and bulk-data encryption. The 783-pin FCPBGA package uses a 29 mm x 29 mm body with 1 mm pitch and provides thermal dissipation through the die-attached heat spreader. The device supports industrial temperature grades and extended product longevity programs typical of NXP communications processors. The MPC85xx silicon integrates a programmable QUICC Engine subsystem for legacy communications protocols, dual Gigabit Ethernet controllers with TCP/IP acceleration offload, and a local bus controller supporting NAND flash, NOR flash, and SRAM memories. The e500 core includes a Book-E implementation with MMU and floating-point unit optional on select variants. Security engines accelerate AES, DES/3DES, SHA-1/SHA-256, and public-key algorithms, enabling hardware VPN termination at line rate. Typical applications include industrial routers, telecom gateways, factory automation controllers, network-attached storage platforms, and secure VPN appliances. The device's combination of high-frequency e500 core, multi-protocol QUICC Engine, and integrated security acceleration makes it well-suited for embedded designs requiring deterministic networking throughput combined with hardware cryptographic offload. Designers should consider the substantial 783-ball BGA footprint during PCB layout: minimum 8-layer stack-up with dedicated power planes is recommended to maintain signal integrity across high-speed DDR memory and SerDes interfaces. Thermal management requires an exposed heat spreader or top-side heatsink to maintain junction temperatures below the 105C specification under continuous load. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not consolidated on the manufacturer datasheet cover page, helping engineers evaluate the MPC8535EAVTATH for both new designs and legacy system refresh.

RFQ संपर्क
MPC8535EBVTAKGA - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP
MPC8535EBVTAKGA

MPC8535EBVTAKGA - PowerPC e500 MPU 600MHz 783-FCPBGA | NXP

The NXP Semiconductors MPC8535EBVTAKGA is a PowerPC e500 microprocessor IC from the MPC85xx family delivering 1-core 32-bit processing at 600 MHz in a 783-pin FCPBGA (29x29) package. The device integrates an e500 core with security/encryption features (the "EB" suffix per NXP ordering scheme) and is intended for embedded networking and industrial control applications requiring deterministic PowerPC performance. A microprocessor (MPU) is the central processing unit of an embedded system, executing operating systems and application software while interfacing with external memory and peripherals. The MPC85xx family sits within NXP's Power Architecture embedded processor portfolio, a hierarchy that spans PowerPC -> Power Architecture -> embedded microprocessor -> system-on-chip-class CPU. These devices typically integrate memory controllers, local bus interfaces, and security accelerators, reducing external component count in routers, switches, and industrial gateways. Key features of the MPC8535EBVTAKGA include a 32-bit PowerPC e500 core running at 600 MHz, integrated security acceleration logic, on-chip L1/L2 cache, and a high-bandwidth system bus for memory and I/O. The 783-FCPBGA (29 mm x 29 mm) package supports the high I/O count demanded by dual Gigabit Ethernet controllers, DDR memory interface, PCI Express, and local bus interfaces present in the family. The MPC8535 architecture pairs the e500 core with a dedicated system interface unit, allowing the processor to issue memory transactions in parallel with DMA operations. This parallelism is critical for networking line cards where sustained packet throughput must coexist with control-plane software execution. The "EB" designator indicates the encryption-enabled security engine, used for IPsec, SSL, and other cryptographic workloads. Typical applications include wired and wireless edge routers, industrial Ethernet gateways, networked storage controllers, and defense/aerospace secure processing platforms. Designers select this part when PowerPC software compatibility is required and integrated security is desired without external crypto coprocessors. When designing with the MPC8535EBVTAKGA, allocate at least four PCB layers with a solid ground plane beneath the BGA to manage the 600 MHz switching currents. Decouple each power domain with bulk, mid-range, and high-frequency ceramic capacitors placed as close as possible to the package vias. This page synthesizes distributor pricing, drop-in alternatives, package geometry, and practical design notes not duplicated on distributor product pages, giving engineers a single reference for evaluation, sourcing, and PCB-level integration.

RFQ संपर्क
MPC8535EBVTANGA - PowerQUICC III 800MHz SoC | NXP Semiconductors
MPC8535EBVTANGA

MPC8535EBVTANGA - PowerQUICC III 800MHz SoC | NXP Semiconductors

The NXP Semiconductors (formerly Freescale) MPC8535EBVTANGA is a PowerQUICC III integrated communications processor that combines an 800 MHz PowerPC e500 core with high-speed peripheral integration on a single device, packaged in a 783-ball FC-PBGA at 29x29 mm. The MPC8535E is designed to deliver gigahertz-class complex application processing performance with exceptional feature integration and high-speed connectivity for IP network and advanced embedded systems. Built on a 32-bit Power Architecture, it includes 256 KB of L2 cache and integrates security acceleration, dual GbE controllers, and multiple high-speed serial interfaces for system-on-chip designs. This product is a microprocessor in the broader taxonomy of microprocessors -> microcontrollers and processors -> integrated circuits -> semiconductors. The MPC8535E PowerQUICC III family targets networking infrastructure and industrial control applications where deterministic processing, integrated peripherals, and security offload reduce bill-of-materials cost and PCB complexity. As an SoC, it eliminates the need for separate companion bridge chips in many designs. Key features include an 800 MHz PowerPC e500 core with dual-issue pipeline, integrated DDR2/DDR3 memory controller with ECC, dual 10/100/1000 Ethernet MACs, four PCI Express lanes, two SATA ports, USB 2.0, SDHC, local bus, and security engines supporting DES, 3DES, AES, RSA, and SHA. The integrated SEC (Security Engine) accelerates bulk encryption and public-key operations, offloading the CPU for wire-speed throughput. The device supports an extended operating temperature range of 0C to 105C. Architecture-wise, the MPC8535E uses a hierarchical bus structure with the e500 core connected through a CoreNet coherency fabric to the L2 cache and peripheral controllers. The DDR memory controller supports both DDR2 and DDR3 SDRAM with ECC for high-reliability applications. The integrated peripherals are accessed via the same coherency fabric, minimizing latency. Typical applications include enterprise routers, Ethernet switches, network attached storage (NAS), IP PBX systems, industrial automation controllers, secure gateways, and single-board computers in networking equipment. The combination of processing power, peripheral integration, and security offload makes the MPC8535E well suited for line-card processors in routers and switches where deterministic throughput is critical. When designing with this device, allocate adequate PCB area for thermal dissipation and signal routing of the 783-ball PBGA. The extended operating temperature of 0C to 105C supports industrial deployments. Use the NXP CodeWarrior development tools and reference BSPs from NXP for rapid prototyping. This page synthesizes distributor pricing, parameter data from the manufacturer datasheet, and engineering guidance not found in the standard product listings.

RFQ संपर्क
MPC8535EBVTANGA557 - PowerQUICC III 800MHz SoC | NXP | FCPBGA-783
MPC8535EBVTANGA557

MPC8535EBVTANGA557 - PowerQUICC III 800MHz SoC | NXP | FCPBGA-783

The NXP MPC8535EBVTANGA557 is a PowerQUICC III integrated communications processor built around a PowerPC e500 core running at 800 MHz, housed in a 783-ball FCPBGA (29x29 mm) package. It integrates high-speed connectivity including DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, and Gigabit Ethernet alongside an SEC crypto engine, targeting IP network, storage, and advanced media processing applications. What is a PowerQUICC III communications SoC? PowerQUICC III is NXP/Freescale's third-generation Power Architecture-based system-on-chip family for embedded networking and telecommunications. It integrates a PowerPC processor core with memory controllers, high-speed serial interfaces, security engines, and packet-processing acceleration logic on a single die. Within the broader taxonomy it sits at the intersection of microprocessors, network processors, and SoCs, and is a member of the power management and high-performance embedded category. Key features include a 32-bit PowerPC e500 core at 800 MHz with up to 1 GHz capability in the family, hardware-accelerated SEC security processing, dual Gigabit Ethernet MACs, integrated SATA 1.5/3.0 Gb/s ports, PCI Express and PCI interfaces, DDR2/DDR3 memory controller with ECC support, SDHC interface, and a flexible local bus controller. These integration points reduce the need for companion chips in router, gateway, and NAS designs. Architecturally the MPC8535E pairs the e500 core with a high-bandwidth system bus and dedicated DMA engines, allowing the SEC, Ethernet, and SATA blocks to move data without heavy CPU intervention. Compared to discrete MCU-plus-discrete-controller solutions, this tight integration lowers BOM count and improves determinism for packet workloads. Typical applications include wired and wireless routers, network attached storage (NAS), industrial gateways, secure VPN appliances, and advanced media processing platforms. The SEC engine also makes it suitable for IPsec/SSL acceleration in next-generation firewalls. When designing with this part, verify that the 783-ball FCPBGA layout has adequate PCB escape routing for DDR3 and SERDES lanes, since signal integrity and stack-up cost dominate the design. Thermal management is critical: at 800 MHz under sustained load, plan for airflow or heatsinking per the device's thermal profile. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference point for evaluating the MPC8535EBVTANGA557.

RFQ संपर्क
MPC8535EBVTAQG - PowerQUICC III 1.0GHz e500 MPU | Freescale/NXP
MPC8535EBVTAQG

MPC8535EBVTAQG - PowerQUICC III 1.0GHz e500 MPU | Freescale/NXP

The Freescale/NXP MPC8535EBVTAQG is a high-performance PowerQUICC III integrated processor featuring a 32-bit Power Architecture e500 core scaling up to 1.0 GHz (with the family rated up to 1.25 GHz), housed in a 783-ball FCPBGA (29x29 mm) package. It implements Power Architecture technology with a 36-bit physical address space, and is targeted at industrial-grade networking and embedded control applications. A microprocessor (MPU) is the central processing unit of an embedded system that fetches, decodes, and executes instructions while managing memory and peripherals. The MPC8535EBVTAQG belongs to the PowerQUICC III family of communications processors, which sit in the hierarchy: MPU -> microprocessor -> integrated processor -> Power Architecture -> PowerPC -> communications processor. PowerQUICC III parts integrate CPU cores, memory controllers, and communications peripherals on a single die, enabling high-throughput packet processing for routers, switches, and industrial gateways. Key features of the MPC8535EBVTAQG include a 1.0 GHz e500 core, integrated DDR memory controller, dual GbE controllers, PCI Express and RapidIO interconnect support, and a high-bandwidth local bus. Industrial-grade temperature qualification supports deployment in factory automation, telecom edge equipment, and harsh-environment networking appliances where commercial parts would fail. The device uses a system-on-chip architecture combining a PowerPC-class CPU with hardware acceleration blocks for queue management, table lookup, and cryptography offload. This integration reduces BOM count versus discrete CPU-plus-ASIC designs and simplifies PCB layout, although the 783-ball BGA footprint demands multilayer PCB fabrication with controlled-impedance routing for the DDR and SerDes lanes. Typical applications include industrial Ethernet switches, routers and network appliances, telecom base station controllers, factory automation controllers, and secure gateways. The 1.0 GHz core delivers deterministic throughput for layer-2/layer-3 packet forwarding while the integrated peripherals eliminate external PHY and bridge chips. When designing with this processor, allocate at least 6 PCB layers with dedicated power and ground planes; the 783-ball BGA requires 0.8 mm pitch fanout with microvia or via-in-pad technology. Decouple each voltage rail with bulk, mid-frequency, and high-frequency ceramic capacitors placed as close to the balls as the BGA land pattern allows. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and hardware teams evaluate the part against current PowerQUICC III family members and successor Layerscape devices.

RFQ संपर्क
MPC8535EBVTATHA - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP
MPC8535EBVTATHA

MPC8535EBVTATHA - PowerPC e500 MPU 1.25GHz 783-FCPBGA | NXP

The NXP MPC8535EBVTATHA is a PowerPC e500-based integrated microprocessor from the MPC85xx family, featuring a single 32-bit core operating at up to 1.25 GHz, housed in a 783-ball FCBGA (Flip-Chip Plastic Ball Grid Array) package measuring 29 mm x 29 mm. The part integrates a security co-processor (SEC) for cryptographic acceleration and a DDR2/DDR3 memory controller, making it a complete system-on-chip for wired networking and embedded computing workloads. What is a PowerPC e500 MPU? The PowerPC e500 architecture is a 32-bit superscalar embedded processor core originally developed by Freescale (now part of NXP Semiconductors) targeting networking, storage, industrial control, and telecom infrastructure. Within the broader taxonomy, the MPC8535 sits as an MPU (microprocessor unit) -> embedded processor -> microprocessor -> integrated circuit. The e500 core typically pairs with integrated peripherals (memory controllers, security engines, Ethernet MACs) so a single chip can replace what previously required a CPU plus discrete glue logic on the PCB. Key features of this variant include hardware-accelerated cryptography (SEC), a 64-bit DDR2/DDR3 memory controller with ECC support, integrated Ethernet interfaces, and PCI Express connectivity. Operating temperature and qualification tier are encoded in the part suffix: T indicates -40C to +105C extended industrial temperature, A indicates the silicon revision A, and TH indicates the specific operating-condition/customer profile. The FCBGA-783 package with 29 mm x 29 mm body requires a high-density multi-layer PCB with controlled-impedance routing, matched-length serpentine traces for DDR lines, and via-in-pad or microvia assembly technology. Architecturally, the MPC8535EBVTATHA pairs the e500 core with a high-bandwidth system bus that fans out to the DDR memory controller, the SEC engine, and the I/O subsystem (Ethernet, PCIe, local bus). The 1.25 GHz clock speed in this variant is the top end of the MPC8535 speed grade range, delivering roughly 1700 DMIPS of integer performance. The hardware SEC engine accelerates AES, 3DES, SHA, and public-key operations used in IPsec, SSL/TLS, and DRM pipelines, offloading these tasks from the main CPU. Typical applications include industrial routers and gateways, network attached storage (NAS) controllers, secure access points, industrial control boards, and OEM embedded modules. The wide operating temperature range and integrated security engine make the part especially well-suited to industrial networking and headless-edge appliances that must run unattended for years. When designing with this device, engineers must follow NXP's reference PCB layout for the FCBGA-783 - signal integrity on the DDR2/DDR3 interface and thermal dissipation through the package's die-side thermal interface are both critical. Boot configuration, clock routing, and power-up sequencing are governed by NXP documentation. Limited availability on the open market (the part is in lifecycle transition and stocked mostly through distributors like Rochester Electronics for legacy builds) should also be considered during component selection. This page synthesizes verified distributor data, package-level cross-references, and design notes not consolidated on a single manufacturer page.

RFQ संपर्क
MPC8535ECVJAKGA - PowerQUICC III MPU 600MHz 783-FCBGA | NXP
MPC8535ECVJAKGA

MPC8535ECVJAKGA - PowerQUICC III MPU 600MHz 783-FCBGA | NXP

The NXP (formerly Freescale) MPC8535ECVJAKGA is a PowerQUICC III integrated communications processor built on the Power Architecture e500 core, delivering 600 MHz of processing performance within a 783-ball FCBGA (29x29 mm) package designed for industrial temperature ranges (-40C to +105C). It integrates a single 32-bit e500 core with DDR2/DDR3 memory controller, high-speed serial interfaces including PCI Express and SATA, plus Gigabit Ethernet, USB, SDHC, and the Security Engine (SEC) for cryptographic acceleration, making it a true system-on-chip for embedded networking. What is a PowerQUICC processor? A PowerQUICC (pronounced 'power-quick') is a family of communications processors from NXP (originally Freescale, originally Motorola) that integrates one or more Power Architecture CPU cores with a high-bandwidth Communications Processor Module (CPM) or QUICC Engine. The family spans PowerQUICC I, II, and III generations and sits in the broader taxonomy: PowerQUICC -> communications processor -> application processor -> microprocessor -> integrated circuit -> semiconductor. PowerQUICC III parts specifically target enterprise routers, switches, wireless base stations, and industrial control requiring deterministic multi-protocol I/O. The MPC8535E's headline features include a 32-bit e500 core running at 600 MHz, hardware-accelerated Security Engine (SEC 3.0) supporting DES/3DES/AES/SHA, two PCI Express interfaces, two Gigabit Ethernet controllers, two SATA-II ports, a USB 2.0 controller, an enhanced SDHC host, and 256 KB of internal SRAM with L1/L2 cache hierarchy. The integrated DDR2/DDR3 SDRAM controller supports up to 512 MB of addressable memory with ECC, while DUART, I2C, SPI, and local bus glue logic round out the peripheral set for legacy MCU-style connectivity. Architecturally, the MPC8535E uses a Harvard-style e500 core with separate 32 KB L1 instruction and data caches plus a unified 256 KB L2 backside cache. The device implements NXP's Trust Architecture with secure boot and the SEC block offloading symmetric/asymmetric crypto from the CPU. On-chip serdes macros deliver multi-gigabit connectivity without external PHYs, which historically reduced board cost in router line cards and RAID controllers. Typical applications include enterprise routers and switches, RAID storage controllers, industrial automation controllers, secure access points, factory automation PLCs, and military/aerospace embedded systems. The wide peripheral integration and -40C to +105C industrial temperature grade target designs requiring both rich I/O and harsh-environment reliability. When designing with this device, evaluate whether the 600 MHz e500 throughput is sufficient for your control plane, confirm DDR3 routing supports fly-by topology for 783-ball flip-chip BGA assembly, and budget for the 783-ball FCBGA requiring multi-layer PCB with microvia stack-ups. Per the NXP product page, this part has reached End of Life status, so redesigns should verify remaining inventory and consider the newer QorIQ P-series family for fresh designs. This page consolidates authorized distributor pricing, parametric specifications, package details, and engineering guidance beyond the raw datasheet to help procurement and design engineers evaluate the MPC8535ECVJAKGA for both legacy maintenance and new embedded designs.

RFQ संपर्क
MPC8535ECVTAKGA - PowerQUICC III MPU, 600MHz, 783-FCBGA | NXP
MPC8535ECVTAKGA

MPC8535ECVTAKGA - PowerQUICC III MPU, 600MHz, 783-FCBGA | NXP

The NXP MPC8535ECVTAKGA is a PowerQUICC III integrated communications processor built around the PowerPC e500 core, delivering up to 600 MHz of complex application processing performance in a 783-ball FCBGA (29x29 mm) package. It integrates a high-speed system-on-chip with DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, Gigabit Ethernet MACs and a Security Engine (SEC), targeting IP networking, storage and industrial gateway designs with extended -40C to +105C temperature support. PowerQUICC III is the third-generation Power Architecture communications processor family from NXP (formerly Freescale), succeeding PowerQUICC II and combining a high-performance e500 core with on-chip peripherals formerly found in external ASICs. Within the broader system hierarchy it sits between a generic microprocessor (MPU) and a fully integrated network processor, integrating the CPU core, memory controller, DMA engines, security accelerator and multi-protocol peripherals on a single die for deterministic, low-latency packet handling. Key features include a 32-bit PowerPC e500 core with up to 600 MHz core frequency, an integrated SEC security engine for IPSec, SSL/TLS and bulk encryption, dual Gigabit Ethernet controllers with TCP/IP acceleration, four SerDes lanes configurable for PCI/PCIe and SATA, an enhanced local bus controller, dual I2C, DUART, GPIO and DDR2/DDR3 SDRAM controller with ECC. The 783-FCBGA package provides ample thermal headroom for industrial-temperature operation and exposes all high-speed interfaces without external glue logic. Typical applications include industrial routers and gateways, secure VPN concentrators, networked storage controllers (NAS/iSCSI), factory-floor control and edge compute platforms, and aerospace/defense communications where the -40C to +105C temperature range and SEC engine are required. The integrated DDR2/3 controller with ECC further supports designs that need error-corrected memory for high-availability systems. When designing with the MPC8535ECVTAKGA, plan a 6-layer PCB at minimum for DDR3 signal integrity, provide a dedicated 1.0V core supply with tight load-line regulation, and follow NXP hardware specifications document for SerDes reference clock jitter. Bypass capacitors must be placed as close as possible to each supply pin, and unused balls must remain connected per the package layout guide to avoid signal coupling. This page synthesizes distributor availability, drop-in alternatives drawn from the PowerQUICC III family, and practical hardware-design considerations not consolidated in the original datasheet.

RFQ संपर्क
MPC8535ECVTAKGA557 - 600MHz PowerQUICC III e500 MPU | NXP
MPC8535ECVTAKGA557

MPC8535ECVTAKGA557 - 600MHz PowerQUICC III e500 MPU | NXP

The NXP Semiconductors MPC8535ECVTAKGA557 is a PowerPC e500 microprocessor in NXP's PowerQUICC III family, delivering a single 32-bit core at 600MHz in a 783-ball FC-PBGA (29x29 mm) package. Part number decoding indicates the 1V core voltage tier (V suffix), commercial temperature grade (T), and the “A557” customer-specific order code supplied by Rochester Electronics. A microprocessor (MPU) is a single-chip CPU with on-chip caches, memory management, and peripheral controllers, sitting at the top of a typical embedded hierarchy (MPU -> SoC -> integrated circuit -> semiconductor). The MPC85xx family integrates communications peripherals alongside the e500 core, allowing wired networking, storage, and industrial control firmware to run on one chip without an external controller ASIC. Key features include the 600MHz e500 core with double-precision FPU, integrated L1/L2 caches, an enhanced local bus controller, DDR memory controller, multiple Gigabit Ethernet MACs, and PCI/PCI-X interfaces. The 1V core rail keeps active power modest for its performance tier, while the FC-PBGA package supplies the ball density required for the wide external memory and I/O buses. The MPC8535E uses a Book E/embedded PowerPC architecture with hardware table-walk MMU and tightly coupled SRAM, supporting deterministic interrupt latency for real-time protocol stacks. Integrated security and SEC engines (where enabled by device derivative) provide protocol offload for IPsec, SSL/TLS, and IPSec-accelerated VPN gateways, which historically drove the part's adoption in mid-range routers and security appliances. Typical applications include industrial networking routers, network attached storage controllers, telecom line cards, and embedded control planes. The 29x29 mm FC-PBGA requires a multilayer PCB with controlled-impedance routing for DDR and SerDes lanes. When designing the power tree, allocate at least 2A peak headroom on the 1V core rail to absorb e500 core activity bursts. Place a minimum 22uF bulk + 0.1uF high-frequency decoupling distribution across the BGA balls, and follow NXP layout guidelines for DDR termination to avoid signal-integrity re-spins. This page consolidates distributor inventory, datasheet references, same-family order codes, and engineering trade-offs that the bare manufacturer datasheet does not summarize.

RFQ संपर्क
MPC8536AVJATHA - 1.25GHz PowerPC e500 SoC | NXP | Networking
MPC8536AVJATHA

MPC8536AVJATHA - 1.25GHz PowerPC e500 SoC | NXP | Networking

The NXP MPC8536AVJATHA is a 1.25 GHz PowerQUICC III system-on-chip (SoC) microprocessor built around a single 32-bit PowerPC e500 core, housed in a 783-ball FCPBGA (29x29 mm) package and rated for 0 to 90 degrees C operation. A system-on-chip for embedded networking integrates a processor core, memory controllers, and high-speed I/O onto one die, replacing multi-chip solutions and reducing board complexity. Within the power-management and embedded-processing hierarchy, the MPC85xx PowerQUICC III family sits above smaller PowerQUICC II devices and targets gigahertz-class application processing with balanced I/O throughput for IP networking and advanced media processing. Key features include dual 10/100/1000 Mbps Ethernet controllers, dual SATA 3Gbps interfaces, and triple USB 2.0 ports, providing native connectivity for storage gateways and network appliances. The integrated DDR2 and DDR3 memory controllers support high-bandwidth main memory without external bridge chips. PCI and PCI Express interfaces enable flexible expansion, while DUART, I2C, SPI, and MMC/SD (SDHC) peripherals cover control and storage needs. Technically, the e500 core combines a RISC execution pipeline with NXP enhanced peripherals and interconnect technology, balancing core performance against I/O system throughput. Multiple supply rails (1.5V, 1.8V, 2.5V, and 3.3V per distributor data) support core, I/O, and interface domains, requiring sequenced power-up design. The 783-ball FCPBGA 29x29 mm outline demands a multilayer PCB with controlled-impedance high-speed routing for DDR3, PCIe, and SerDes signals. Typical applications include IP network routers and switches, storage controllers using the dual SATA and Gigabit Ethernet interfaces, industrial control systems, and media processing equipment where gigahertz-class processing is required. A critical design consideration is thermal management: a 1.25 GHz PowerPC e500 dissipates substantial power, so a properly sized heatsink and airflow must be validated against the datasheet thermal resistance figures before finalizing the enclosure. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, helping engineers secure last-time-buy stock for this End-of-Life part.

RFQ संपर्क
MPC8536AVTAKGA - PowerQUICC III 600MHz SoC | NXP | Networking
MPC8536AVTAKGA

MPC8536AVTAKGA - PowerQUICC III 600MHz SoC | NXP | Networking

The NXP (formerly Freescale) MPC8536AVTAKGA is a PowerQUICC III integrated communications processor that combines a 32-bit Power Architecture e500 core running at 600 MHz with high-speed peripherals for IP networking and advanced media processing. Housed in a 783-ball FCPBGA (29x29 mm) package, the device integrates DDR2/DDR3 memory controllers, SDHC, PCI/PCIe, SATA, dual Gigabit Ethernet, and USB interfaces on a single die. A PowerQUICC (pronounced "power-quick") processor is a family of communications-centric SoCs that originated at Motorola/Freescale and continued under NXP. The PowerQUICC architecture targets embedded networking equipment where deterministic I/O, multi-protocol support, and robust peripheral integration outweigh raw GHz performance. Within the broader taxonomy, MPC8536 sits in the PowerQUICC III family of integrated communications processors -> Power Architecture SoCs -> embedded processors -> microprocessors -> semiconductors. Key features include the e500 core with dual-issue superscalar pipeline, integrated L1/L2 caches, a system-on-chip DDR2/DDR3 SDRAM controller with ECC, two Gigabit Ethernet MACs with SGMII support, two PCI Express interfaces, one PCI interface, two SATA ports, USB 2.0, SDHC, and a security engine. The integrated peripherals allow a single MPC8536 to replace a CPU-plus-discrete-controller board, reducing BOM count in routers, switches, and network attached storage. The architecture employs a coherent system bus connecting the e500 core to the memory controller and high-speed I/O. Hardware acceleration for protocol processing offloads packet handling from the core, enabling sustained line-rate throughput on GbE ports without CPU saturation. The 0 to 90 C operating range supports thermally constrained embedded environments without industrial-grade silicon. Typical applications include enterprise routers, SOHO/SMB switches, network attached storage (NAS), industrial gateways, and IP set-top boxes. The combination of GbE plus PCIe plus SATA makes the part well suited to consolidated headless NAS controllers where DDR3 memory bandwidth and dual GbE aggregation are required. When designing with this device, allocate the largest available PCB area to the 783-ball FCPBGA breakout, route DDR3 signals with matched lengths, and verify that the heatsink thermal design keeps junction temperature below 90 C at maximum sustained load. The part is now in NXP's obsolescence roadmap for the PowerQUICC III line - check the NXP product change notification before committing to new designs.

RFQ संपर्क
MPC8536AVTANG - PowerPC e500 MPU 800MHz 783-FCBGA | NXP
MPC8536AVTANG

MPC8536AVTANG - PowerPC e500 MPU 800MHz 783-FCBGA | NXP

The NXP MPC8536AVTANG is a PowerPC e500 microprocessor from the PowerQUICC III MPC85xx family, delivering 800 MHz of single-core 32-bit processing performance in a 783-pin FCBGA (29x29 mm) package. Fabricated on a 0.09 µm process, the device operates from multi-rail supplies of 1.0 V (core), 1.5 V, 1.8 V, 2.5 V, and 3.3 V for I/O and DDR2 memory interfaces. The integrated communications processor combines high-performance computing with on-chip peripherals for storage, networking, and industrial control. A PowerQUICC III MPU belongs to the microprocessor (MPU) category within the broader Integrated Circuits > Microcontrollers/MPU taxonomy. PowerQUICC III devices integrate one or more PowerPC e500 cores with peripheral controllers (Ethernet, DMA, I2C, SPI, UART, PCI Express, security engines), enabling them to replace discrete CPU-plus-ASIC designs in routing, switching, and embedded gateway applications. The MPC8536AVTANG features a 32-bit PowerPC e500 core with a 32 KB instruction and 32 KB data L1 cache, a 256 KB L2 cache, hardware MMU, and an integrated DDR2 memory controller. It also includes two 10/100/1000 Mbps Ethernet MACs, four 10/100 Mbps Ethernet MACs, USB 2.0, PCI Express, and optional security acceleration. Energy management features such as doze, nap, sleep, and deep-sleep modes reduce power in idle periods. The architecture combines a superscalar e500 execution pipeline with on-chip SRAM and a high-bandwidth system bus, allowing deterministic response in real-time communications workloads. The 783-FCBGA package exposes wide parallel DDR2, local-bus, and serial RapidIO interfaces, supporting line-rate packet processing in enterprise and service-provider equipment. Typical applications include enterprise routers and switches, network security appliances, industrial control gateways, storage controllers, and SOHO/SMB routing platforms. The integrated Ethernet and security blocks make it a strong fit for VPN/firewall appliances and converged IP service gateways. When designing with this MPU, allocate dedicated ground/power planes on the PCB for the 1.0 V core supply, follow the NXP hardware specifications for DDR2 routing (length-matched, impedance-controlled traces), and provide a heatsink or thermal interface material since a single 1 GHz class PowerPC part typically dissipates 5-10 W at full utilization. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design considerations not collected in a single place on the manufacturer datasheet, giving procurement, hardware, and firmware teams a faster path to a Bill of Materials decision.

RFQ संपर्क