उत्पाद (44,000+)

MX674ALCWI+ - 12-Bit SAR ADC, 28-SOIC | Maxim Integrated
MX674ALCWI+

MX674ALCWI+ - 12-Bit SAR ADC, 28-SOIC | Maxim Integrated

The Maxim Integrated MX674ALCWI+ (now branded Analog Devices / Maxim Integrated) is an industry-standard, complete 12-bit successive-approximation analog-to-digital converter (SAR ADC) with 1 input channel, internal clock, and internal 10V voltage reference, housed in a 28-pin SOIC (Wide, 0.300") package. Per the Maxim datasheet family, the MAX174/MX574A/MX674A ADC family supports a maximum conversion time of 25 us and operates from +/-12V or +5V analog supplies, depending on the temperature grade, making it a drop-in modern replacement for the long-discontinued AD574A. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision ADC architecture that uses an internal DAC and comparator to binary-search the input voltage over N clock cycles (where N is the resolution in bits). For a 12-bit SAR ADC like the MX674ALCWI+, each conversion completes in 12 clock cycles plus settling time, providing a deterministic acquisition window, low latency, and no pipeline delay. SAR ADCs sit in the hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor, and are favored over delta-sigma ADCs in multiplexed data-acquisition systems, industrial control loops, and instrumentation where single-shot accuracy and fast response matter more than maximum noise resolution. Key features of the MX674ALCWI+ include 12-bit resolution with +/-1 LSB maximum linearity error (L grade), bipolar input range of +/-5V or +/-10V (selected by pin strapping), single +5V digital supply compatibility, a 25 us maximum conversion time, and an internal buried-zener reference trimmed to 10.00V. The device also provides three-state output buffers for direct connection to an 8-bit or 16-bit microprocessor data bus, plus standard control lines (CS, R/C, CE, AO) compatible with the AD574A and AD674A pinout. The MX674ALCWI+ is built on a bipolar/CMOS (BiCMOS) process that allows the analog input section to operate from +/-12V or +/-15V supplies while the digital section runs from a single +5V rail. This mixed-voltage architecture eliminates the level shifters that would otherwise be required when interfacing to a 5V microcontroller or DSP. The internal reference is a buried-zener design with low drift and low noise, typically 10 ppm/C, enabling uncalibrated 12-bit accuracy over the commercial 0C to +70C temperature range. Typical applications include industrial process-control data acquisition boards, multi-channel 4-20 mA loop digitization, precision instrumentation front-ends, medical patient-monitoring equipment, and legacy replacement designs for AD574A/AD674A sockets in defense, aerospace, and test-and-measurement systems. When designing with the MX674ALCWI+, the analog input must be driven from a low-impedance source (typically an op-amp buffer such as the AD845 or OP-27) to keep the input settling time below the acquisition window. Decoupling with 0.1 uF ceramic + 10 uF tantalum on each supply pin is mandatory, and unused digital input pins should not be left floating - tie them to logic-high or logic-low as specified in the datasheet. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate the MX674ALCWI+ for new designs and legacy AD574A socket replacements.

RFQ संपर्क
MX674ALCWI+T - 12-Bit SAR ADC with Ref, 28-SOIC | Maxim Integrated
MX674ALCWI+T

MX674ALCWI+T - 12-Bit SAR ADC with Ref, 28-SOIC | Maxim Integrated

The Maxim Integrated MX674ALCWI+T is a complete 12-bit successive-approximation analog-to-digital converter (SAR ADC) that integrates the reference, clock, and three-state output buffers on-chip, housed in a 28-pin wide-body SOIC package. It operates from +5 V and +/-15 V analog supplies (or single +5 V supply), samples at up to 66 ksps, and provides 12-bit parallel output with 8- and 16-bit microprocessor interface compatibility. What is a SAR ADC? A successive-approximation analog-to-digital converter is a type of ADC that uses a binary-search algorithm against an internal DAC to resolve an analog input into a digital code, balancing conversion speed with moderate-to-high resolution. SAR ADCs sit in the hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. They are favored over flash converters for moderate resolution (12-16 bits) where lower power, smaller die, and high noise immunity matter more than raw GHz sampling. Key features include an on-chip buried-Zener reference for long-term stability, 12-bit linearity with +/-1 LSB maximum INL and DNL, three-state output buffers that simplify bus sharing, and a choice of input ranges (0-10 V, +/-5 V, +/-10 V, 0-20 V) selectable via pin strapping. The device also provides a status output (STS) that simplifies polling or interrupt-driven service routines to a host processor. Typical applications include industrial process-control front-ends, instrumentation data acquisition, motor-control current/voltage sensing, medical patient-monitoring front-ends, and precision transducer signal conditioning. Designers choose the MX674 over 16-bit ADCs when 12-bit dynamic range is acceptable and lower cost / faster conversion is required. The wide SOIC-28 footprint simplifies hand-prototyping and rework compared to small-outline QFN alternatives. A practical design tip: reserve adequate digital-to-analog ground separation because the internal clock transitions can inject noise into the analog input. Use a single star ground or a solid analog/digital split to preserve 12-bit noise floor performance.

RFQ संपर्क
MX7575KP+ - 8-Bit 5µs ADC with Track/Hold, PLCC-20 | Maxim
MX7575KP+

MX7575KP+ - 8-Bit 5µs ADC with Track/Hold, PLCC-20 | Maxim

The Maxim Integrated (now Analog Devices) MX7575KP+ is a CMOS, microprocessor-compatible, 8-bit successive-approximation analog-to-digital converter (ADC) with 5µs/10µs conversion time, integrated on-chip track/hold, and a 20-pin PLCC package. It accepts a 0V to 2.46V unipolar analog input range, supports input bandwidth up to 50 kHz (386 mV/µs slew rate), and includes a parallel microprocessor interface for direct connection to 8-bit data buses. An 8-bit successive-approximation ADC is a type of data converter that uses a binary-search algorithm against an internal precision DAC to resolve an analog input into a digital code, balancing speed, resolution, and cost. Successive-approximation ADCs sit in the broader hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. They are favored for general-purpose digitisation where 8-16 bit resolution at medium sampling rates is sufficient, dominating applications like process control, instrumentation, and embedded sensor reading. Key features include 5µs typical conversion time (10µs maximum), on-chip track/hold for full-scale signals up to 50 kHz, a unipolar 0-2.46V analog input range, +5V single-supply operation, and a parallel µP-compatible interface that maps directly onto bus architectures. Internal reference and clock options simplify external bill-of-materials, and the CMOS construction keeps power consumption moderate for a 5V ADC. The MX7575KP+ operates from a single +5V supply and is specified over the commercial 0°C to +70°C temperature range. The built-in track/hold removes the need for an external sample-and-hold amplifier in most applications, reducing system cost and board area. Conversion initiation can be controlled via the WR/RD inputs, allowing the host CPU to read conversion results without an external latch. Typical applications include process control and industrial data acquisition, digital-panel meters, portable instrumentation, embedded microcontrollers requiring an analog channel, test equipment front-ends, and simple closed-loop control systems. The 5µs conversion time suits loop bandwidths in the kilohertz range, comfortably digitising 4-20 mA-derived signals after scaling. The MX7575KP+ is the PLCC-20, 0°C-to-+70°C commercial-grade variant of the MX7575 family; it is differentiated from the MX7575JP+ (CERDIP package), the MX7575KP-T (tape-and-reel packaging code), and the MX7575JN by package and operating grade. Designers should ensure a clean analog ground plane and a 0.1µF supply bypass capacitor close to the supply pin to avoid conversions errors from digital switching noise. This page synthesizes distributor pricing, same-family drop-in variants, and PLCC-20 compatible alternatives not aggregated elsewhere, giving sourcing and engineering teams a single reference for evaluating the MX7575KP+ for new designs or legacy second-source support.

RFQ संपर्क
MX7575KP+T - 8-Bit 200kSPS SAR ADC w/ T/H | Maxim Integrated
MX7575KP+T

MX7575KP+T - 8-Bit 200kSPS SAR ADC w/ T/H | Maxim Integrated

The Analog Devices / Maxim Integrated MX7575KP+T is a 8-bit, 200 kSPS successive-approximation analog-to-digital converter with an on-chip track-and-hold amplifier, packaged in a 20-pin PLCC (LCC-20) carrier suitable for tape-and-reel delivery. It converts a 0 V to +2.46 V unipolar analog input range and interfaces to microprocessors through a standard 8-bit parallel data bus with CS and RD control lines. An 8-bit successive-approximation ADC (SAR ADC) is a type of data converter that uses a binary-search algorithm against an internal precision DAC to determine each code in N conversion clock cycles. SAR converters are valued for deterministic latency, single-shot accuracy, and low power consumption, and they sit within the broader hierarchy of analog-to-digital converter -> data converter -> signal chain IC -> mixed-signal semiconductor. The MX7575 family sits at the low-resolution, high-speed end of that hierarchy. Key features include a 5 us conversion time (compatible with the slower 10 us MX7576), a track-and-hold capable of acquiring full-scale signals up to 50 kHz (386 mV/us slew rate), a microprocessor-compatible parallel interface, single +5 V supply operation from 4.75 V to 5.25 V, and commercial 0 C to +70 C temperature grade. Internal reference and clock options are integrated to minimise external parts count. The MX7575 uses a standard CMOS SAR core with an input track-and-hold that allows full-scale dynamic signals to be converted without an external sample-and-hold. The 8-bit parallel output simplifies hookup to common 8-bit microcontrollers and DSPs of its era, and the part is offered in PLCC-20 and PDIP-20 packages. Power dissipation is modest at approximately 25 mW active, with an explicit power-down mode that drops quiescent draw for battery-instrument applications. Typical applications include portable digital instrumentation, process-control front ends, embedded data-acquisition boards, multiplexed data-logging systems, and replacement of legacy 8-bit ADC slots in industrial controllers. The PLCC-20 footprint and parallel bus make it a drop-in candidate when modernising legacy designs that originally specified the Maxim MX7575 or pin-equivalent AD7575. When designing with this part, place a 0.1 uF decoupling capacitor close to VDD, observe the 5 us acquisition-aperture timing relative to RD/CS, and ensure the analog input stays within 0 V to VREF to avoid code saturation. The PLCC-20 socket or footprint allows hand-rework-friendly prototyping, but production runs are typically tape-and-reel for surface-mount assembly. This page synthesises distributor pricing, same-family Maxim drop-in alternatives, and practical design notes that complement the manufacturer datasheet. It is intended for engineers evaluating the MX7575KP+T for new designs, obsolescence re-sourcing, or as a pin-compatible swap where the AD7575 was originally specified.

RFQ संपर्क
MX7575SQ/883B - 8-Bit 5µs SAR ADC, MIL-883B | Maxim Integrated
MX7575SQ/883B

MX7575SQ/883B - 8-Bit 5µs SAR ADC, MIL-883B | Maxim Integrated

The Maxim Integrated MX7575SQ/883B is an 8-bit, microprocessor-compatible, successive-approximation analog-to-digital converter (SAR ADC) with a 5 µs conversion time, housed in an 18-pin CDIP (ceramic DIP) package and qualified to MIL-STD-883B for military and aerospace applications. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a type of data converter that uses a binary-search algorithm against an internal precision DAC to determine each bit of the output word in N clock cycles for an N-bit converter. SAR ADCs occupy the middle ground between flash ADCs (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, slowest); they are the workhorse converter for 8-to-16-bit industrial, instrumentation, and process-control sampling because they deliver a single conversion on demand with deterministic latency and modest power consumption. Key features of the MX7575SQ/883B include a single +5 V supply operation, parallel data output for direct µP bus connection, a built-in track-and-hold, and a ratiometric reference input that lets the user scale full-scale range to any span between 0 V and VREF. The /883B suffix indicates the part is processed to MIL-STD-883B, including burn-in and extended temperature screening, making it suitable for avionics, missile guidance, and ruggedized industrial systems. Architecturally, the MX7575 family combines a CMOS successive-approximation register, a precision thin-film DAC ladder, and a CMOS comparator on a single die. The 5 µs typical conversion time at 8 bits resolution corresponds to roughly 200 kSPS sampling capability, which is sufficient for control-loop digitizing, vibration monitoring, and multiplexed data acquisition. Typical applications include military/aerospace data acquisition systems, industrial process-control analog input modules, multiplexed 4-to-16 channel scanning digitizers, vibration and acoustic monitoring front-ends, and legacy µP-based instrumentation where parallel-output ADCs simplify interface glue logic. The ceramic DIP package and MIL-STD-883B screening also make it a preferred choice for new designs that must trace to MIL-PRF-38535 qualified manufacturing lines. When designing with this converter, route the analog input trace as a guard-ring-protected microstrip, decouple VDD and VREF with 10 µF tantalum in parallel with 100 nF ceramic at the package pins, and drive /CS and the conversion-start logic with a clean digital supply. The reference pin must be bypassed with at least 1 µF to ground. This page synthesizes distributor availability (5100 units in stock per icDirectory as of 2026-10-15), MIL-STD-883B qualification notes, and same-package Maxim cross-references that you will not find aggregated in the manufacturer datasheet PDF alone.

RFQ संपर्क
MX7575TQ/883B - 8-Bit 5µs SAR ADC, Military, 18-CDIP | Maxim
MX7575TQ/883B

MX7575TQ/883B - 8-Bit 5µs SAR ADC, Military, 18-CDIP | Maxim

The Maxim Integrated MX7575TQ/883B is a high-speed, microprocessor-compatible, 8-bit analog-to-digital converter (ADC) housed in an 18-pin ceramic DIP (CDIP) package and qualified to MIL-STD-883B. According to the Maxim datasheet, the device performs successive-approximation conversions in 5µs (typical) or 10µs (max), and integrates an on-chip track-and-hold that allows full-scale input signals up to 50 kHz (386 mV/µs slew rate) to be digitized without an external SHA. What is an 8-bit SAR ADC? A successive-approximation register ADC is a type of Nyquist-rate data converter that walks an internal DAC one bit per clock cycle to converge on the input voltage, producing a fixed-latency, deterministic conversion in N clock cycles for an N-bit result. SAR ADCs sit in the hierarchy: ADC -> data converter -> data acquisition IC -> signal chain -> mixed-signal semiconductor. The 8-bit resolution places the MX7575 in the precision-but-not-high-accuracy tier, well suited to digital-panel-meter replacement, instrumentation front-ends, and embedded microprocessor analog input boards. Key features include 8-bit resolution, single +5 V supply operation, parallel output interface for direct µP bus attachment, and a track-and-hold on the analog input. The /883B suffix indicates compliance with MIL-STD-883 Test Method 5008 for Class B screening (burn-in, temperature cycle, hermeticity), making the part suitable for military and aerospace programs that require flight-grade or ruggedized data converters. The architecture uses an internal 2.5 V bandgap reference and a charge-redistribution CDAC; the LSB weight is therefore (VREF / 256). External clock rates up to approximately 1.25 MHz yield the 5 µs typical conversion time advertised in the datasheet. The robust parallel interface reads the conversion result with a single CS/RD strobe, allowing easy glue-less connection to 8080/6800-style microprocessors. Typical applications include military avionics sensor digitizers, ruggedized process-control analog input modules, legacy replacement for AD7575 in flight systems, sonar and acoustic front-end sample-and-convert blocks, and instrumentation digitizers that demand a hermetic through-hole part for hi-rel assembly lines. Design tip: when migrating from the commercial MX7575 to the /883B version, the AC and DC parameters are unchanged - only the screening flow differs - so PCB layout, reference decoupling, and timing budgets are identical. Provide a clean +5 V analog supply and 100 nF decoupling on VDD and VREF pins. This page synthesizes current distributor pricing, /883B-specific screening context, drop-in equivalents and 18-CDIP PCB layout notes not found in the standalone Maxim datasheet.

RFQ संपर्क
MX7582K/D - 12-Bit 4-Channel SAR ADC Die | Maxim Integrated
MX7582K/D

MX7582K/D - 12-Bit 4-Channel SAR ADC Die | Maxim Integrated

The Maxim Integrated MX7582K/D is a calibrated, 12-bit, 4-channel successive-approximation analog-to-digital converter (ADC) supplied in bare die (DIE) form factor. It performs a complete conversion in 100 microseconds and includes an auto-zero cycle that reduces zero-scale error to typically below 100 microvolts. The /CS, RD, and WR inputs allow direct connection to 8-bit microprocessor buses without external glue logic, and the device maintains true 12-bit performance across the full commercial operating temperature range without external trims. The /K suffix indicates the commercial temperature grade (0C to +70C), and the /D suffix denotes the die-package option sold on waffle tray or in waffle pack. An ADC (analog-to-digital converter) is a data-acquisition component that converts real-world analog signals into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. Successive-approximation-register (SAR) ADCs use a binary-search algorithm with an internal DAC and comparator to resolve N bits in N clock cycles, trading conversion speed for low power consumption and high noise immunity. The MX7582K/D is part of Maxim Integrated's CMOS 12-bit SAR portfolio alongside the MX7572 and MX7672 series, sitting at the multi-channel end of the family. Key features include 4 single-ended analog input channels multiplexed into a single 12-bit SAR core, an internal clock and reference buffer, true bipolar input capability via external scaling, and a parallel microprocessor interface with /CS, RD, WR, and INT control. The die form factor allows hybrid and MCM (multi-chip module) integrators to place the converter directly on the substrate to minimize analog trace length and improve noise immunity.

RFQ संपर्क
MX7672K/D - 12-Bit 3µs SAR ADC, Die Form | Maxim Integrated
MX7672K/D

MX7672K/D - 12-Bit 3µs SAR ADC, Die Form | Maxim Integrated

The Maxim Integrated (Analog Devices) MX7672K/D is a 12-bit, high-speed, BiCMOS successive-approximation analog-to-digital converter (ADC) supplied in unpackaged die form, performing a full conversion in as little as 3µs while consuming only 110 mW. The die-format /D suffix means the part is shipped as a bare die on a waffle pack or similar carrier for hybrid and MCM (multi-chip module) integration, rather than in a conventional plastic package. The device accepts a single analog input channel, uses an external -5 V reference, and includes a buffered reference input so one reference can drive multiple MX7672 ADCs simultaneously. The MX7672 is documented as a plug-in replacement for the AD7672, simplifying migration of legacy analog-to-digital subsystems onto Maxim/ADI silicon. An SAR ADC (successive-approximation register analog-to-digital converter) is a type of data converter that performs a binary search against the analog input using an internal DAC and comparator, producing one bit per clock cycle. SAR ADCs sit inside the broader hierarchy of analog-to-digital converters (ADC) -> data converters -> data acquisition ICs -> signal chain -> mixed-signal semiconductors. They are valued for their deterministic latency, low power, and excellent DC accuracy, making them a workhorse for industrial process control, instrumentation, and precision data-acquisition front ends. Key features of the MX7672 include 12-bit resolution with no missing codes, a 3µs typical conversion time (yielding roughly 308 kSPS throughput), an external -5 V reference input with buffer, a BiCMOS process for low-power high-speed operation, and a clock input that can be driven from a crystal or an external microprocessor clock. The architecture supports both unipolar (0 V to VREF) and bipolar (±VREF) input ranges when the device is paired with the appropriate input conditioning. The buffered reference minimizes reference-source loading and stabilizes conversion gain across temperature. Architecturally the MX7672 uses a charge-redistribution DAC array and a low-noise comparator, clocked by an internal state machine that implements the SAR algorithm. The BiCMOS process merges bipolar transistors for the reference buffer, comparator, and analog front end with CMOS logic for the SAR register and digital interface, optimizing both analog accuracy and digital power. Power dissipation of 110 mW is competitive for a 12-bit 3µs SAR ADC of this generation, and the device scales power with the clock since the SAR core only burns current during the active conversion window. Typical applications for the MX7672 include industrial process control loops, precision data-acquisition front ends, multi-channel instrumentation with external analog multiplexers, motor control feedback ADCs, weigh-scale and load-cell digitizers, hybrid/MCM signal-conditioning modules, and legacy drop-in upgrades for AD7672-based boards. The combination of high speed, low power, and single-supply-friendly operation makes it well-suited to dense multi-channel systems where one reference serves many converters. When designing with the MX7672 in die form, plan the die layout, ESD protection, wire-bond interconnect, and package selection carefully — die-format parts require hermetic or custom packaging, bond-pad ESD protection, and substrate-bias management. Ensure the external -5 V reference is low-noise and well decoupled at the reference pin; the buffered reference input is forgiving but still benefits from a 10µF local bypass capacitor. Keep analog and digital grounds separated at the die assembly and join them at a single star point to preserve 12-bit accuracy. This page synthesizes Maxim/ADI distributor pricing, same-package drop-in alternatives, hybrid/MCM design notes, and AD7672 migration guidance not found in the standalone manufacturer datasheet, providing an engineer-ready overview for selecting the MX7672K/D in legacy and new designs.

RFQ संपर्क
MX7820KEWP+T - 8-Bit 1.3µs ADC w/ Reference & T/H | Maxim
MX7820KEWP+T

MX7820KEWP+T - 8-Bit 1.3µs ADC w/ Reference & T/H | Maxim

The Maxim Integrated MX7820KEWP+T is a 20-pin SOIC-packaged 8-bit CMOS analog-to-digital converter with a 1.3 µs conversion time, an internal 2.5 V voltage reference, and an on-chip track-and-hold amplifier. It operates from a single +5 V supply, accepts a 0 V to VREF analog input, and delivers 8-bit resolution at throughputs up to 500 ksps (typical). A flash-method ADC (sometimes called a parallel ADC) is a converter architecture that uses one comparator per output code level, completing a conversion in essentially one clock cycle. This architecture sits in the hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. The MX7820 family combines a high-speed analog front-end (track-and-hold + comparator ladder) with a precision bandgap reference, replacing a typical design that would otherwise require an external ADC plus separate reference plus external sample-and-hold. Key features include 1.3 µs typical conversion time (RD-mode), an internal 2.5 V reference (VREF) with ±25 mV initial accuracy, a track-and-hold input stage supporting signals up to the conversion rate, and a simple parallel microprocessor interface (RD, WR, CS, mode-control pins). The SOIC-20 wide-body package (KEWP suffix) is footprint-compatible with the original Maxim MX7820 and with the Maxim MX7821 family of pin-compatible 8-bit ADCs. An internal oscillator eliminates the need for an external clock source in stand-alone mode. At a 500 ksps throughput, the MX7820 typically consumes 60 mW from a +5 V supply. Standby current drops below 1 µA when CS is held high, making the part suitable for battery-powered data acquisition subsystems that wake periodically to digitize a sensor channel. Typical applications include industrial process control front-ends, portable data loggers, and digital panel-meter / instrumentation A/D front-ends. The 8-bit resolution and 1.3 µs throughput align with legacy sensor interface boards in factory automation where MX7820 sockets are already designed in. The internal 2.5 V reference simplifies bill-of-materials versus ADC-only parts that require an external ADR03 or LM4040 reference. When designing with MX7820KEWP+T, ensure VREF decoupling uses a 10 µF tantalum plus 0.1 µF ceramic within 5 mm of the REF pin. The track-and-hold input requires a low-impedance drive (< 50 Ω) for full-accuracy conversion - add a wideband op-amp buffer such as the MAX410 if the source impedance is above 1 kΩ. Keep digital and analog grounds separate and tie them at a single point under the IC. This page synthesizes distributor pricing, parametric comparison with pin-compatible same-family parts, and practical layout guidance beyond what the original Maxim datasheet provides.

RFQ संपर्क
MX7821K/D - 660ns 8-Bit ADC Half-Flash Die | Maxim Integrated
MX7821K/D

MX7821K/D - 660ns 8-Bit ADC Half-Flash Die | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MX7821K/D is a high-speed, microprocessor-compatible 8-bit analog-to-digital converter (ADC) supplied as a bare die (waffle pack / unsawn wafer) using a half-flash conversion architecture. Housed in a 20-terminal DIE package (rectangular, NO LEAD), it delivers 660ns typical conversion time versus 1.36us for the industry-standard 7820, making it a drop-in performance upgrade for legacy 7820 designs. It features an on-chip track-and-hold input stage and an 8-bit parallel microprocessor interface. An ADC (analog-to-digital converter) is a semiconductor device that converts a continuous analog voltage on its input pin into a discrete digital code at its output. ADC devices sit within the data-converter product hierarchy (ADC -> data converter -> mixed-signal IC -> semiconductor). The MX7821's half-flash architecture uses two 4-bit flash ADCs and a DAC to perform an 8-bit conversion in approximately 15 clock cycles, balancing conversion speed against die area and power consumption. The K temperature grade and the /D (die-level) designation indicate commercial-temperature operation and bare-die shipping format. Key features include 660ns conversion time, a built-in track-and-hold for accurate sampling of fast-moving signals, an on-chip input multiplexer supporting single-ended or differential inputs, and a high-speed parallel interface compatible with 8-bit microprocessors. The half-flash topology reduces switching transients compared to a full-flash converter, simplifying analog-input filtering. For design engineers, the MX7821K/D is intended for OEM designs requiring high-throughput analog signal acquisition such as instrumentation front-ends, digital oscilloscope digitizers, and process-control front ends. The bare-die format allows direct chip-on-board (COB) or hybrid-module integration, eliminating package parasitics and shortening the analog-input trace length, which is critical at the part's native conversion bandwidth. When using a bare-die ADC, engineers must design bond-pad layouts and apply known-good-die (KGD) handling procedures. Designers familiar with the 7820 can retain their analog front-end and digital-interface schematics and simply lower the conversion-time clocking budget to benefit from the MX7821's higher throughput without a PCB rework on a packaged variant. This page consolidates distributor availability, drop-in die/package alternatives, and design notes that are not present in the manufacturer datasheet.

RFQ संपर्क
MX7824KN+ - 8-Bit 4-Ch High-Speed CMOS ADC | Maxim Integrated
MX7824KN+

MX7824KN+ - 8-Bit 4-Ch High-Speed CMOS ADC | Maxim Integrated

The Maxim Integrated MX7824KN+ is a high-speed, 8-bit CMOS analog-to-digital converter (ADC) with a 4-channel analog input multiplexer, housed in a 24-pin plastic DIP (0.300 inch, 7.62 mm) through-hole package. The converter uses a half-flash (two-step flash) architecture that delivers a 2.5 µs per-channel conversion rate, including track-and-hold acquisition, with a single +5 V supply. The four analog input channels are multiplexed, and the device provides a track-and-hold function capable of digitizing full-scale input signals up to the supply rails. A flash ADC is a type of analog-to-digital converter that uses a parallel bank of comparators and a resistor ladder to convert an analog voltage to a digital code in a single step. The MX7824KN+ uses a half-flash (or two-step) topology, which is a hybrid of flash and successive-approximation architectures. It performs a coarse conversion first, then a fine conversion on the residue, effectively halving the comparator count of a full-flash design while keeping conversion time fast. This places it in the broader hierarchy: ADC -> data converter -> mixed-signal IC -> semiconductor. Half-flash ADCs are valued in mid-speed embedded designs for their combination of speed, low pin count, and low cost compared to full-flash or pipeline converters. Key features include 8-bit resolution, four single-ended analog inputs, an on-chip track-and-hold, three-state latched outputs that connect directly to microprocessor data buses, and TTL/CMOS-compatible digital I/O. The device operates from a single +5 V supply and supports a commercial temperature grade (0 °C to +70 °C). The + suffix in the MPN indicates lead-free, RoHS-compliant lead finish. The MX7824KN+ and its MX7828 sibling are pin-compatible with the Analog Devices AD7824 and AD7828, which gives designers a second-source option. The MAX154 and MAX158 also share this pinout but integrate internal references. Internally, the half-flash conversion technique halves the comparator count compared with a full-flash ADC, lowering both power and noise. Typical applications include data acquisition systems, process control front-ends, multiplexed sensor monitoring, portable instrumentation, and embedded microprocessor analog interfaces. The 2.5 µs conversion time is well-suited to monitoring slowly varying signals such as temperature, pressure, and potentiometric position, or to multiplexing several transducers into a single MCU ADC channel when higher throughput is required than the MCU's internal ADC can deliver. A key design consideration is that the +5 V single-supply operation simplifies power trees in 5 V digital systems but limits input range to roughly 0 V to 5 V; for bipolar or larger signals, add an external input signal-conditioning front end. For new designs, the wider 8-channel MX7828KN+ may be preferred if more analog inputs are needed, but it shares the same pin footprint and software interface. This page consolidates distributor pricing, drop-in pin-compatible alternatives including the AD7824BQ and AD7824KNZ from Analog Devices, and practical design notes that are not duplicated in the manufacturer datasheet alone.

RFQ संपर्क
MX7824UQ/883B - 8-Bit 4-Ch High-Speed ADC | Maxim Integrated CDIP-24
MX7824UQ/883B

MX7824UQ/883B - 8-Bit 4-Ch High-Speed ADC | Maxim Integrated CDIP-24

The Analog Devices / Maxim Integrated MX7824UQ/883B is an 8-bit, 4-channel, high-speed CMOS analog-to-digital converter (ADC) with an on-chip track-and-hold stage, housed in a 24-pin ceramic DIP (CDIP-24) windowed package and qualified to MIL-STD-883 Class B. The part provides a single-channel conversion time of 2.5 us and uses a flash (half-flash) architecture for low-latency digitisation of multiplexed analog signals in defense, instrumentation, and process-control systems. An ADC (analog-to-digital converter) is a semiconductor device that converts continuous analog voltages into discrete digital codes so that a microcontroller, FPGA, or DSP can read real-world signals. The MX7824 belongs to the successive-approximation / half-flash ADC family, sits inside the broader data-converter hierarchy (ADC -> data converter -> mixed-signal IC), and is specifically designed for multi-channel data-acquisition front-ends where several sensors must share one converter. The 4-input analog multiplexer is integrated on the die, which saves board area and simplifies firmware channel sequencing versus a discrete MUX-plus-ADC design. Key features include 2.5 us conversion time per channel, 4 single-ended analog inputs with channel-selection logic, an internal or external reference option, and TTL/CMOS-compatible digital outputs. The half-flash architecture halves the comparator count versus a true flash ADC, reducing power consumption while preserving high throughput. The /883B suffix indicates MIL-STD-883 Class B screening for military and aerospace applications, including hermetic ceramic packaging, burn-in, and full temperature testing from -55C to +125C. Typical applications include military and avionics data-acquisition systems, industrial process-control front ends, medical imaging front-ends, and legacy replacement of older AD570/AD571/AD573-era ADCs in defense upgrades. The CDIP-24 windowed package is also preferred for high-reliability retrofit designs where through-hole lead-form robustness and visual die inspection are required. When designing with this part, leave at least 1 uF of decoupling on the analog VDD pin and route analog grounds separately from digital grounds. The internal reference can be overdriven by an external 2.5V reference for absolute-accuracy applications; otherwise the on-chip reference simplifies BOM and layout. This page synthesises distributor pricing, MIL-STD-883 cross-reference alternatives, and practical design notes for the MX7824UQ/883B that are not aggregated on a single manufacturer or distributor page.

RFQ संपर्क
MX7828KCWI+T - 8-Bit 8-Ch 400kSPS Parallel ADC | Maxim Integrated
MX7828KCWI+T

MX7828KCWI+T - 8-Bit 8-Ch 400kSPS Parallel ADC | Maxim Integrated

The Analog Devices Inc./Maxim Integrated MX7828KCWI+T is an 8-bit, 8-channel, high-speed CMOS analog-to-digital converter (ADC) with a parallel data interface and a 28-SOIC (0.295 inch / 7.50 mm width) package. It samples at 400 kSPS using a flash (semi-flash) conversion method and operates from a single +5 V analog supply with a +5 V digital supply. An ADC (analog-to-digital converter) is a data-acquisition semiconductor that converts a continuous analog voltage on one of its inputs into a discrete digital code that a microcontroller, FPGA, or DSP can read. The MX7828 is part of a wider family that includes the MX7824 (4-channel variant), MAX154, and MAX158. These parts sit in the data-converter hierarchy: ADC -> data converter -> signal chain IC -> mixed-signal semiconductor. Key features include 400 kSPS throughput, 8 single-ended analog input channels multiplexed to the converter core, an internal reference architecture (per the datasheet description for the MAX154/MAX158/MX7824/MX7828 family), and a parallel interface that simplifies connection to microcontrollers and logic. The 28-SOIC wide-body package handles higher power dissipation than narrow-body SOIC and exposes a robust lead frame for production through-hole-free reflow. The architecture uses a two-step (semi-flash) conversion technique that halves the comparator count versus true flash, reducing both die area and input capacitance. This 8-channel input mux and 400 kSPS rate make the MX7828 a strong fit for multi-loop process control, instrumentation, and panel-meter designs that previously required multiple single-channel ADCs. Typical applications include multi-channel data-acquisition systems, industrial process control loops, panel meters, instrumentation, and any embedded design needing simultaneous sampling of multiple analog sensor signals with deterministic latency. Designers can also use it as a faster upgrade path for legacy MAX154/MAX158 sockets. When designing with this part, place 0.1 uF decoupling capacitors as close to the AVDD and DVDD pins as possible, and keep analog and digital grounds joined at a single point near the ADC. The +5 V analog supply should be low-noise - any ripple directly couples into the conversion result. The parallel interface leaves ample timing margin at 400 kSPS for most 8-bit microcontrollers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - including selection guidance, comparison against the 4-channel MX7824 and the higher-pin-density MAX158, and pinout details for the 28-SOIC footprint.

RFQ संपर्क
MX7828LCWI+T - 8-Bit 8-Ch 400kSPS Parallel ADC | Maxim Integrated
MX7828LCWI+T

MX7828LCWI+T - 8-Bit 8-Ch 400kSPS Parallel ADC | Maxim Integrated

The Maxim Integrated MX7828LCWI+T is an 8-bit, 8-channel, 400 kSPS parallel analog-to-digital converter (ADC) with a flash (semi-flash) architecture, housed in a 28-pin SOIC (0.295 inch / 7.50 mm width) package and supplied on tape-and-reel. It accepts up to 8 single-ended analog input channels via an internal input multiplexer, runs from a single +5 V supply, and delivers 8-bit parallel output through a microprocessor-compatible interface. An ADC (analog-to-digital converter) is a data-conversion integrated circuit that quantizes a continuous analog input voltage into a discrete digital code. The MX7828 belongs to the successive-approximation / semi-flash ADC family, which sits in the broader hierarchy of mixed-signal data converter ICs. Eight-bit converters such as the MX7828 are commonly used in cost-sensitive embedded designs where moderate resolution is sufficient, and the 400 kSPS throughput is adequate for control-loop or instrumentation sampling rather than high-precision signal processing. Key features include 400 kSPS guaranteed sampling rate, 8 analog input channels with on-chip mux, parallel 8-bit digital output, single +5 V supply operation, an internal reference of 2.5 V, and a track/hold amplifier that simplifies front-end design. The 28-SOIC (wide-body) package provides easy hand-solderability for prototyping and is widely accepted by automated surface-mount lines. The MX7828 uses a semi-flash architecture that combines two 4-bit flash stages to reach 8-bit resolution in fewer comparators than a true flash ADC, reducing die area and power consumption while still delivering 400 kSPS conversion rates. This architecture is a strong fit for medium-speed embedded data-acquisition systems. Typical applications include process-control data acquisition boards, multi-channel sensor monitoring (temperature, pressure, strain-gauge bridges), industrial front-ends, portable instrumentation, and digital panel-meter designs. The 8-input mux also supports scanned battery-monitoring systems. When designing with the MX7828, drive the analog inputs with low-impedance sources (≤ 50 ohm) and bypass VDD with a 0.1 uF ceramic capacitor placed within 3 mm of the supply pin to minimize digital switching noise on the analog rail. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ संपर्क
MZVLB512HAJQ-00000 - 512GB PM981 NVMe M.2 SSD | Samsung
MZVLB512HAJQ-00000

MZVLB512HAJQ-00000 - 512GB PM981 NVMe M.2 SSD | Samsung

The Samsung MZVLB512HAJQ-00000 is a 512 GB internal NVMe solid-state drive in the M.2 2280 form factor (22 mm × 80 mm × 3.5 mm), built around Samsung's Polaris/Phoenix (S4LR020) controller on a PCI-Express 3.0 x4 interface. The 512 GB SKU uses Samsung 64-layer TLC 3D V-NAND and ships with an LPDDR4 DRAM cache; typical power draw is well under 5 W, making it drop-in compatible with virtually any laptop or desktop M.2 NVMe slot. An M.2 NVMe SSD (Non-Volatile Memory Express) is a small-form-factor solid-state drive that connects directly to the host CPU via the NVMe protocol stack on top of PCIe lanes. Compared to SATA SSDs that top out near 550 MB/s, NVMe drives move multi-gigabyte data streams in seconds and have largely replaced SATA for primary OS and application drives in modern notebooks, ultrabooks, workstations, and small-form-factor desktops. Key characteristics of this drive: 512 GB user-addressable capacity, sequential reads commonly benchmarked near 3000 MB/s and writes around 1400–1800 MB/s, PCIe 3.0 x4 host interface, TLC 3D V-NAND with a DRAM cache for low-latency random access, and a 22×80×3.5 mm M.2 2280 mechanical outline. The PM981 family was launched in 2017 as Samsung's OEM/embedded NVMe drive used in Lenovo, HP, Dell and other OEM notebooks before the retail PM981a and 970 EVO branding. The Polaris/Phoenix controller exposes eight NAND channels and supports NVMe 1.2/1.3 features such as APST power states and S.M.A.R.T. telemetry. Because the firmware is OEM-tuned, exact sequential numbers vary by firmware revision (e.g., EXA7301Q is widely observed in the wild); refer to platform benchmarks for representative throughput. Typical applications are OEM notebook storage upgrades, ultrabook primary boot drives, workstation scratch disks, and embedded/edge NVR or industrial PCs that need a compact, high-throughput NVMe drive in the M.2 2280 form factor. In legacy HP Pavilion 15-bc550na and Lenovo ThinkPad P71 systems, the MZVLB512HAJQ-00000 is the factory-installed M.2 drive and is a known-good upgrade baseline. When designing in or sourcing this part, note that the MZVLB512HAJQ is an OEM-only P/N (not retailed in retail Samsung 970/990 channels). It is drop-in compatible with MZVLB512HAJQ-000H1, -000H2, -00007, -000L2 and -000L7 firmware variants that share the same 512 GB PM981 hardware. This page aggregates OEM firmware lists, verified distributor availability, M.2 2280 drop-in equivalents, and design notes drawn from real forum and OEM service-manual data not found in a single manufacturer PDF.

RFQ संपर्क
N25Q016A11EV7A0 - 16Mbit SPI NOR Flash 108MHz | Micron
N25Q016A11EV7A0

N25Q016A11EV7A0 - 16Mbit SPI NOR Flash 108MHz | Micron

The Micron Technology N25Q016A11EV7A0 is a 16Mbit (2 MB) SPI NOR flash memory device operating from a 1.8V supply with a maximum SPI clock frequency of 108 MHz, housed in an 8-pin WSON (DFN-8 style) surface-mount package. It is a member of Micron's N25Q embedded flash family, which executes code-in-place (XIP) with a single data line and supports standard, dual, and quad SPI protocols. SPI NOR flash is a type of non-volatile memory organized as a serial-access memory array addressed through the Serial Peripheral Interface. Within the memory hierarchy, it sits in the code-storage class (NOR allows random read access for direct code execution), as opposed to NAND flash used for bulk data storage. NOR flash is the standard boot memory for embedded processors, microcontrollers, FPGAs, and system BIOS storage. Key features of the N25Q016A11EV7A0 include the 108 MHz maximum clock rate (the highest speed grade of the N25Q 16Mbit class), 1.8V core supply typical of battery-powered and portable designs, and sector/block-based erasure with page programming. The device supports fast read, dual output read, and quad I/O commands that reduce effective boot time in embedded systems. Architecturally, the 16 Mbit array is organized into uniform sectors with an SPI command set compatible with the broad N25Q/M29P family, easing migration across density points. The V11 suffix denotes the 1.8V supply class; the EV suffix denotes the 8-pin WSON package; the A0 grade denotes the standard industrial part. Typical applications include FPGA configuration storage, MCU code and data storage in industrial controls, networking equipment boot ROM, automotive infotainment subsystems where non-automotive grade is acceptable, and consumer electronics firmware storage. Design consideration: place a 100 nF ceramic decoupling capacitor as close as possible to the VCC pin, and keep SPI clock traces short with a series termination resistor on SCK at 108 MHz operation. This page synthesizes distributor pricing, stock availability, and drop-in alternative analysis not consolidated in the manufacturer datasheet.

RFQ संपर्क
N25Q032A13ESFA0F - 32Mb, 3V, 108MHz SPI NOR Flash | Micron
N25Q032A13ESFA0F

N25Q032A13ESFA0F - 32Mb, 3V, 108MHz SPI NOR Flash | Micron

The Micron Technology N25Q032A13ESFA0F is a 32Mb (4MB) 3V multiple I/O serial NOR flash memory with a 108 MHz SPI-compatible clock interface, supplied in a 16-pin wide SOIC package on tape and reel. It is fabricated on Micron's 65nm NOR process technology and is positioned as an automotive-grade code storage solution. Serial NOR flash is a nonvolatile memory category that stores executable code and data while retaining contents without power. In the system hierarchy, it sits under flash memory -> nonvolatile semiconductor memory -> memory IC. Unlike NAND flash, NOR flash supports random access to any byte, which makes it the standard choice for direct in-place code execution (XIP, execute-in-place) in embedded processors and microcontroller boot applications. Key features of this device include the 108 MHz maximum SPI clock rate, multiple I/O operation (single, dual, quad I/O) that multiplies effective transfer bandwidth beyond the raw clock rate, a 3V supply operating window (2.7V to 3.6V class), and an execute-in-place (XIP) mode with defined confirmation bit settings to activate or terminate XIP as documented in the manufacturer datasheet. The device also supports program and erase suspend operations, which allow the host to read from the array while a program or erase cycle completes in the background. Technically, the N25Q family combines the SPI-compatible serial bus interface with a uniform sector architecture typical of 65nm Micron NOR devices. The multiple I/O protocol reduces effective instruction overhead, and the device defines power-up and power-down requirements plus a power-loss rescue sequence, ensuring data integrity in systems exposed to abrupt supply loss. AC reset specifications are defined for applications requiring deterministic reset behavior. Typical applications include automotive embedded systems (the Alliance Memory listing explicitly marks this part as automotive), BIOS/boot code storage, code shadowing for processors, set-top boxes, networking equipment, and industrial control where reliable code storage with quad-SPI bandwidth is required. XIP operation is particularly valuable where RAM is scarce, since code runs directly from the flash array. Design consideration: to sustain 108 MHz quad-I/O operation, keep SPI trace lengths short and matched, and observe the datasheet power-up timing before issuing the first command; the XIP confirmation bit sequence must be executed correctly or the controller will remain in standard SPI mode. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ संपर्क
N25Q032A13EV741 - 32Mb SPI NOR Flash 108MHz | Micron
N25Q032A13EV741

N25Q032A13EV741 - 32Mb SPI NOR Flash 108MHz | Micron

The Micron Technology N25Q032A13EV741 is a 32Mbit SPI NOR Flash memory IC with a maximum clock frequency of 108 MHz, a supply voltage range of 2.7V to 3.6V, and an organization of 8M x 4, housed in an 8-lead VDFPN (EV) surface-mount package. Part status is reported as obsolete by distributor data. A NOR Flash memory is a type of non-volatile memory that retains stored data without power. Within the memory hierarchy, NOR Flash sits alongside NAND Flash and EEPROM as a semiconductor storage device; unlike NAND, NOR Flash supports random access to any address, which makes it the preferred technology for storing boot code, firmware, and executable code directly on the CPU address bus. It connects to a host microcontroller or processor through the Serial Peripheral Interface (SPI), a four-wire serial bus. Key features of the N25Q032A13EV741 include its 108 MHz SPI clock capability (supporting double data rate operation in the N25Q family), 32Mbit density organized as 8M x 4, a 2.7V to 3.6V supply range suitable for standard 3V systems, and page programming with a write cycle time of 8 ms (word) and 5 ms (page) according to distributor specification listings. Technically, the device belongs to Micron's N25Q P-series family, which introduced the enhanced SPI protocol supporting command-based double transfer rate (DTR) reads, allowing effective throughput near 108 MB/s in DDR mode. Sector and block erasure with hardware write protection on the WP# pin protects firmware against accidental corruption. The HOLD# pin suspends serial communication without deselecting the device in multi-drop SPI buses. Typical applications include embedded boot-code storage for microcontrollers and FPGAs, telecom equipment firmware banks (distributor listings categorize the part under the Telecom interface segment), industrial control modules, and set-top box or networking line cards requiring reliable code shadowing. Its 108 MHz DDR read throughput allows XIP (execute-in-place) operation that reduces RAM copy time at boot. When designing with this device, note that the part status is obsolete, so new designs should qualify the newer A-step suffix variants (e.g., N25Q032A13EV7A0) or a second source before committing to the layout. Ensure WP# and HOLD# pins are properly terminated in SPI buses that do not use these functions. This page synthesizes distributor pricing context, drop-in alternative MPNs, pinout data, and practical design notes not consolidated on the manufacturer datasheet alone.

RFQ संपर्क
N25Q064A11ESEA0F - 64Mb SPI NOR Flash 1.8V 108MHz | Micron
N25Q064A11ESEA0F

N25Q064A11ESEA0F - 64Mb SPI NOR Flash 1.8V 108MHz | Micron

The Micron Technology N25Q064A11ESEA0F is an automotive-grade 64Mb serial NOR Flash memory operating at 1.8V, supporting SPI, Dual SPI, and Quad SPI interfaces at clock speeds up to 108 MHz, housed in an 8-pin SOIC Wide package on tape and reel. A serial NOR Flash memory is a nonvolatile semiconductor storage device that stores code and data in NOR array architecture and communicates over a serial peripheral interface (SPI). Unlike NAND Flash, NOR Flash supports random access to any address, which makes it the standard choice for storing boot code and firmware directly executable by a host MCU or processor. Within the memory hierarchy, it belongs to the Flash memory family alongside parallel NOR, NAND, and eMMC devices, and is a cornerstone component of embedded power-management and code-storage subsystems. Key features of the N25Q064A11ESEA0F include the 64M-bit density organized as 64M x 1-bit / 32M x 2-bit / 16M x 4-bit configurations, Quad SPI operation that transfers up to 4 bits per clock cycle for high read throughput, and a fast 8 ns access specification. Manufactured on 65 nm NOR technology, the device delivers low power consumption at the 1.8V supply rail, which is essential for battery-powered and energy-sensitive automotive modules. The device is AEC-Q100 qualified for automotive applications, reflecting stringent temperature cycling, ESD, and reliability screening. Sector and block erasability, standard SPI command compatibility, and support for Dual Output/Quad Output fast-read commands allow seamless integration with common MCU boot ROMs and FPGA configuration engines. The 8-pin SOIC Wide footprint simplifies layout and enables automated assembly. Typical applications include automotive ECU boot code storage, FPGA configuration memory, network equipment firmware, industrial control code banks, and telematics or ADAS module data logging, where nonvolatile code storage with random access and automotive reliability is mandatory. When designing this device, verify that the host controller supports the device command set and that erasure times are accounted for in firmware update routines; use proper pull-ups on HOLD# and WP# pins to avoid unintended state changes during power-up. This page synthesizes verified distributor data, pricing references, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers and buyers a single decision-ready resource.

RFQ संपर्क
N25Q064A13EF8A0F - 64Mb SPI NOR Flash 108MHz | Micron/Alliance
N25Q064A13EF8A0F

N25Q064A13EF8A0F - 64Mb SPI NOR Flash 108MHz | Micron/Alliance

The Micron N25Q064A13EF8A0F (also supplied by Alliance Memory as a second source) is a 64 Mbit (8 MB) automotive-grade serial NOR Flash memory with SPI, dual-SPI, and quad-SPI interfaces, operating at 3 V / 3.3 V and up to 108 MHz, housed in an 8-pin VDFPN (MLP8, 8x6 mm) exposed-pad package delivered in Tape & Reel. Serial NOR Flash is a nonvolatile memory technology that stores code and data in NOR cells accessed over a serial peripheral interface. In the memory hierarchy, NOR Flash occupies the code-storage tier: unlike NAND Flash, it offers random access to any byte, making it the standard boot memory for microcontrollers, FPGAs, and application processors. As a power-management-and-storage building block, it sits alongside DRAM and eMMC in embedded system design. Key features include 64 Mbit density organized as 64 M x 1, 32 M x 2, or 16 M x 4 bits, a 7 ns access timing at full clock rate, and support for execute-in-place (XIP) operation. The quad I/O interface doubles effective throughput versus dual-SPI, reducing boot time in processor-based systems. Multiple I/O command sets and a dedicated reset specification support reliable power-up and power-loss recovery. The device is AEC-Q100 qualified for automotive applications, with part-number codes indicating automotive temperature support, making it suitable for telematics, ADAS auxiliary code storage, and instrument clusters. Its architecture follows the Micron N25Q multiple-I/O SPI family, with uniform sectors supporting fast erase and program operations, plus suspend/resume commands that allow code execution while background erase completes. Typical applications include FPGA configuration storage (notably Intel/Altera SoC FPGAs), automotive ECU boot code, networking equipment firmware, and industrial control systems where XIP eliminates the need to shadow code into RAM. Design consideration: keep SPI trace lengths matched on quad-I/O lines and place a 100 nF decoupling capacitor directly across VCC/GND at pin 8 and pin 4; the exposed die pad should be tied to ground for signal integrity. This page synthesizes distributor inventory data, cross-reference findings, and drop-in alternative analysis not found in a single manufacturer datasheet.

RFQ संपर्क
N25Q128A13E12A0F - 128Mb SPI NOR Flash, 108 MHz | Micron
N25Q128A13E12A0F

N25Q128A13E12A0F - 128Mb SPI NOR Flash, 108 MHz | Micron

The Micron N25Q128A13E12A0F is a 128-Mbit (16M x 8-bit) multiple I/O serial NOR flash memory operating at 3V (2.7V to 3.6V), with a 108 MHz SPI bus interface and 7 ns access time, housed in a 24-ball TBGA (T-PBGA, 6x8 mm) package supplied in tape and reel. Serial NOR flash is a nonvolatile memory technology that stores code and data while allowing direct, addressable random access over the SPI bus. It occupies the memory hierarchy between parallel NOR flash (faster but pin-hungry) and SPI NAND (cheaper but block-oriented). In embedded systems, serial NOR is the standard boot medium for microcontrollers, SoCs, and FPGAs, where execute-in-place (XiP) capability lets the processor run code directly from the flash without copying it to RAM. Key features of the N25Q128A13E12A0F include single, dual, and quad SPI operation (up to 4-bit wide data transfer), 4-Kbyte subsector erase granularity on boot sectors for fine-grained parameter storage, and XiP enabled operation. The 108 MHz clock rate with quad I/O delivers effective read throughput approaching 432 Mbit/s, minimizing boot latency in XiP systems. Technically, this device belongs to Micron's N25Q (formerly Numonyx) family of 3V multiple-I/O serial flash memories, which inherits the SPI command set popularized by earlier generations and adds extended address options, deep power-down modes, and advanced sector protection. The part is specified from -40C to +125C and is offered in automotive-qualified flows per distributor listings citing AEC-Q100. Typical applications include FPGA configuration storage, embedded processor boot code, automotive infotainment and telematics modules, and networking equipment firmware storage. The 128Mb density comfortably hosts U-Boot, Linux kernel images, or large FPGA bitstreams. A key design consideration: quad-SPI signal integrity requires short, length-matched traces with series termination at 108 MHz; verify hold-time requirements when using a low-speed SPI clock for initial FPGA configuration. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
N25Q128A13ESEA0F - 128Mb 3V SPI NOR Flash, SOP-8 | Micron
N25Q128A13ESEA0F

N25Q128A13ESEA0F - 128Mb 3V SPI NOR Flash, SOP-8 | Micron

The Micron Technology N25Q128A13ESEA0F is a 128Mb (16MB) 3V Multiple I/O Serial NOR Flash memory with 4KB sector erase capability, housed in an 8-terminal SOP (SOIC-8 footprint) plastic package. It operates from a 2.7V to 3.6V supply over an industrial -40C to +85C temperature range. Serial NOR Flash is a nonvolatile memory category that stores code and data and executes in place (XIP), sitting within the memory IC hierarchy: serial NOR flash -> NOR flash -> flash memory -> nonvolatile semiconductor memory. Unlike NAND flash, NOR flash offers random byte-level access and high read reliability, making it the standard boot-memory technology for embedded processors and microcontrollers. Key features include 128Mb density organized as 16M x 8, multiple I/O operation (standard SPI, Dual SPI 2x I/O, and Quad SPI 4x I/O) that scales read bandwidth without changing packages, and 4KB subsector erase granularity for efficient parameter storage. The 3V supply family supports fast clocked reads essential for XIP code execution. Architecturally, the device uses Micron's pulse-trained command set with dedicated instructions for page program, sector erase, chip erase, and status polling, and supports quad I/O commands that transfer four bits per clock cycle to accelerate boot and code-fetch workloads. Typical applications include BIOS/UEFI code storage on x86 platforms, boot flash for embedded ARM and network processors, firmware storage in industrial control systems, and automotive electronics modules, where XIP execution and long-term data retention are required. Design consideration: verify that your host controller supports the N25Q command set (Micron pulse protocol) or enable the Spansion-compatible extended command set; also budget erase times for 4KB subsector operations in firmware update routines. This page synthesizes distributor pricing, drop-in alternatives including the Winbond W25Q128JVSJQTR cross-reference, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
N25Q128A13ESF40G - 128Mb SPI NOR Flash, 108 MHz, SO-16
N25Q128A13ESF40G

N25Q128A13ESF40G - 128Mb SPI NOR Flash, 108 MHz, SO-16

The Micron N25Q128A13ESF40G is a 128-Mbit (16 MB) serial NOR flash memory built on 65 nm NOR technology and packaged in a 16-pin SO (208 mil, SOIC-16) form factor. It operates from a 2.7 V to 3.6 V single supply and exposes the storage as 128 Mbit / 64 Mbit / 32 Mbit configurable as 1-bit, 2-bit (Dual SPI), or 4-bit (Quad SPI) per instruction, with a 108 MHz SPI-compatible bus interface and execute-in-place (XiP) capability for direct code execution from flash. A NOR flash is a non-volatile memory that supports random byte-level read access and byte-level program/erase, in contrast to NAND flash which is read in large pages. Serial NOR flash devices such as the N25Q128A13ESF40G connect over a low-pin-count SPI bus, dramatically simplifying board routing while preserving the byte-addressable random read that makes NOR ideal for code storage. Within the memory hierarchy, N25Q128A13ESF40G sits between external boot ROM and the MCU/MPU's internal SRAM, providing firmware storage that the host CPU executes in-place via XiP. Key features include a 108 MHz SPI clock with Dual/Quad I/O instruction extensions, 4 KB sub-sector erase granularity, advanced write protection with top/bottom block lock and OTP security area, 100k program/erase cycles endurance per sector, and 20-year data retention. The device also supports single 1.7 V internal core voltage operation from a single 3 V external rail. 128 Mb density provides ample space for bootloaders, OS images, and configuration data in space-constrained designs. Typical applications include firmware boot storage for STM32/i.MX RT/micro:bit-class MCUs, asset tracking and IoT edge nodes, automotive infotainment boot partitions, industrial PLC firmware storage, and consumer electronics such as set-top boxes, printers, and Wi-Fi modules. The 16-pin SOIC-16 wide-body (208 mil) package is hand-solderable and inspectable, well suited for production and rework. Designers should note that the 'F' suffix in 'ESF40G' indicates 108 MHz Quad SPI performance with a 4-second erase / 108 MHz Quad SPI mode; the 'G' suffix indicates lead-free / Pb-free / RoHS-compliant terminal finish. When migrating from parallel NOR to this part, recalculate access latencies since SPI throughput is lower per pin but Quad SPI closes much of the gap. Always honor the maximum 108 MHz SPI clock and respect tVSL/Vcc ramp requirements during power-up.

RFQ संपर्क
N25Q128A13ESF40G-TR - 128Mb Serial NOR Flash, 108MHz SPI, SOIC-16 | Micron
N25Q128A13ESF40G-TR

N25Q128A13ESF40G-TR - 128Mb Serial NOR Flash, 108MHz SPI, SOIC-16 | Micron

The Micron N25Q128A13ESF40G-TR is a 128-Mbit (16-Mbyte) serial NOR Flash memory built on a 65nm NOR process, supporting 1, 2, and 4-bit multi-I/O SPI operation at a maximum clock frequency of 108 MHz. It is offered in a 16-pin SOIC (SO) wide-body package and supports a single 3.0V (2.7V-3.6V) supply rail for both core and I/O. The "-TR" suffix designates the tape-and-reel packaging option for high-volume SMT assembly, while the F40 speed grade enables the 108 MHz multi-I/O read throughput. The device delivers execute-in-place (XiP) capability, advanced write protection, and a 4-Kbyte subsector erase granularity, making it a flexible code-storage and data-logging solution on space-constrained boards. A serial NOR flash is a non-volatile memory device that uses a low-pin-count synchronous serial interface (SPI) rather than a wide parallel bus. In the broader memory hierarchy, NOR flash sits at the same tier as parallel NOR for code storage but trades bus width for footprint savings; serial NOR is the dominant choice on modern microcontrollers and SoCs that lack an external memory bus. The N25Q128 family implements the JEDEC-standard Serial Peripheral Interface with extensions for Dual SPI and Quad SPI, plus an optional serial command subset for JEDEC xSPI-compatible reads. Key features include 128-Mbit density in 1/2/4-bit modes, 4-Kbyte uniform subsectors with 64-Kbyte sectors and 256-byte page programming buffer, top or bottom boot-block configuration, and security enhancements including one-time-programmable (OTP) protection, 3x 256-byte security registers, and a 64-bit unique ID. Program/erase endurance is rated at 100K cycles per sector minimum with 20-year data retention. The Quad SPI interface enables effective throughput up to 432 Mbit/s when all four I/O lines are active, comfortably supporting XiP code execution from flash on mid-range ARM Cortex-M and RISC-V SoCs. Typical applications include firmware storage for IoT gateways, asset-tracking modules, and industrial controllers; data logging in metering and predictive-maintenance systems; boot ROM plus user-data storage in FPGA-based designs; and BIOS/UEFI storage on SBCs and embedded boards. The wide SOIC-16 footprint suits hand-soldered prototypes as well as high-volume SMT lines. When designing with the N25Q128A13ESF40G-TR, observe the 108 MHz VCC/IO decoupling requirement by placing a 0.1 uF ceramic capacitor adjacent to pins 8 (VCC) and 16 (VSS). Quad SPI traces should be length-matched within approximately 25 mm to preserve sampling margin at 108 MHz, and a pull-up on the HOLD#/RESET# pin prevents unintended resets during power-rail ramp. The standard SPI command set is JEDEC-compatible, so most MCU HAL drivers work without modification. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found on standalone datasheet mirrors. Pricing was captured from authorized distributors as of 2026-10-05; all pinout and timing references should be reconfirmed against the manufacturer datasheet before PCB release.

RFQ संपर्क