उत्पाद (44,000+)

XCKU035-3FBVA676E - -3 Kintex UltraScale FPGA | AMD
XCKU035-3FBVA676E

XCKU035-3FBVA676E - -3 Kintex UltraScale FPGA | AMD

The AMD XCKU035-3FBVA676E is a Kintex UltraScale field-programmable gate array built on 20 nm FPGA technology, with 444,343 logic cells and a 676-ball FCBGA package. The -3 speed grade is the highest-performance grade in the XCKU035 family, making this device suited to demanding parallel processing, high-speed connectivity, signal processing, and accelerator workloads where logic density and timing performance are both important. A field-programmable gate array is a semiconductor whose digital logic, memory, and fixed hard blocks can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic semiconductor and a configurable SoC platform. The Kintex UltraScale family combines programmable logic fabric with high-speed serial transceivers, block RAM, DSP resources, and dedicated input/output resources for communications, industrial, defense, test, and embedded-processing systems. The XCKU035 device provides 444,343 logic cells, 1,945,600 related programmable resources, and 312 listed package-associated entries in the product listing. Its 676-ball FCBGA package supports a high-density pin arrangement required by a large FPGA. The -3 grade is specified for maximum performance within the family; the manufacturer documentation identifies -3 as the highest-performance speed grade, while -2, -1, and -1L are lower-speed or lower-static-power options. The device uses 20 nm FPGA technology and belongs to the Kintex UltraScale generation. Its architecture is intended for designs requiring substantial parallel logic, moderate-to-high-speed data movement, and flexible hardware customization. Exact transceiver count, DSP count, block-RAM capacity, I/O performance, operating-temperature limits, and power envelopes for the exact suffix must be confirmed in the package-specific AMD documentation before a production design is released. Typical Kintex UltraScale applications include high-speed network and storage interfaces, wireless and test-equipment basebands, industrial image processing, radar and signal-processing chains, high-performance embedded systems, and hardware accelerators. The large logic-cell count is especially useful when a design must combine parallel datapaths, buffering, protocol handling, control logic, and accelerator functions in one programmable device rather than across several fixed-function chips. PCB implementation should use the official 676-ball package outline, ball map, escape-routing rules, and power-decoupling recommendations. Because the package uses exposed thermal connections and high-speed I/O, plane assignment, via placement, return-path continuity, decoupling, and thermal management can materially affect signal integrity and junction temperature. This product page combines the exact XCKU035-3FBVA676E package and speed-grade identity with same-footprint family alternatives, application guidance, comparison parameters, and practical implementation notes. Verify the complete pin list, electrical limits, configuration method, and production status against AMD documentation for the exact ordering code before schematic capture or PCB release.

RFQ संपर्क
XCKU035-3FBVA900E - -3 Kintex UltraScale FPGA | AMD
XCKU035-3FBVA900E

XCKU035-3FBVA900E - -3 Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU035-3FBVA900E is a Kintex UltraScale field-programmable gate array built for high-performance programmable logic, signal processing, and accelerated system designs. The device uses the -3 speed grade, which AMD identifies as the highest-performance available Kintex UltraScale grade, and is packaged in a 900-BBGA FCBGA with 468 I/O sites. Its combination of large-scale parallel programmable logic and a high-density ball-grid-array package makes it suitable for demanding networking, industrial, test, defense, video, and compute-adjacent systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic can be configured after fabrication. The FPGA category sits above programmable logic devices in the broader semiconductor hierarchy and combines configurable logic blocks, block RAM, programmable I/O, dedicated processing resources, and high-speed interconnect fabric. Designers use this configurable architecture to implement parallel pipelines, protocol controllers, signal-processing functions, hardware accelerators, and complete interface subsystems without replacing custom silicon. The XCKU035 belongs to the Kintex UltraScale family, which balances large logic capacity with advanced serial connectivity and high-speed I/O. The -3 suffix identifies its performance grade, while FBVA900 identifies the 900-ball FCBGA package and E identifies the specified product-temperature option. The listed 468 I/O sites provide substantial board-level connectivity for high-speed memory, transceivers, clocks, and parallel interfaces. Exact resource counts, voltage ranges, transceiver counts, and timing limits should be confirmed against the AMD XCKU035 documentation for the selected design revision. At the architecture level, UltraScale devices organize programmable resources into advanced logic and memory blocks connected through a high-bandwidth network. This fabric supports wide parallel data paths and allows multiple logic, memory, and I/O-intensive blocks to operate concurrently. Designers can therefore partition functions into deterministic pipelines instead of relying on sequential processor execution. Board-level implementation still requires careful attention to pin assignment, power delivery, clock jitter, transceiver configuration, and thermal management. Typical applications include high-speed network-interface control, industrial automation and motion control, radar and signal-processing front ends, high-speed test equipment, video infrastructure, and embedded edge-computing systems. The 468-I/O package is particularly useful where a design needs numerous parallel interfaces alongside serial links. It is also appropriate for FPGA prototyping and hardware acceleration platforms that require considerably more parallel logic than small serial programmable logic devices. Design planning should begin with the AMD package pinout files and the device pin description, then reserve decoupling for each supply rail before assigning high-speed transceivers or external memory. A 900-BBGA device also requires a multilayer PCB with controlled-impedance routing, via-in-pad or equivalent interconnect structures, adequate thermal spreading, and assembly-process compatibility. Validate signal integrity, power sequencing, junction temperature, and configuration startup behavior in the final system rather than relying only on device-level simulation. This product record combines the exact AMD/Xilinx ordering code, package identity, I/O count, available speed-grade references, source documentation, and practical FPGA design guidance. It also identifies a same-package Kintex UltraScale option for speed or temperature planning while clearly separating those device options from true cross-brand equivalents.

RFQ संपर्क
XCKU035-3SFVA784E - 444343 Logic Cells FPGA | AMD
XCKU035-3SFVA784E

XCKU035-3SFVA784E - 444343 Logic Cells FPGA | AMD

The AMD XCKU035-3SFVA784E is a Kintex UltraScale field-programmable gate array with 444,343 logic cells, 468 I/O, and 19,456,000 embedded memory bits, packaged in a 784-ball FCCSP BGA. The -3 designation identifies the highest-performance speed grade in the XCKU035 family. Its combination of substantial programmable logic, on-chip memory, and high I/O count supports demanding parallel processing, data acquisition, signal processing, and communication systems. A field-programmable gate array is a reconfigurable digital semiconductor in which interconnect and logic functions are established by loading a programmable configuration. Within the product hierarchy, an FPGA is a programmable logic device within the broader integrated-circuit category. Unlike a fixed-function ASIC, an FPGA allows field updates, hardware reuse, and shorter product-development cycles when logic requirements evolve after initial design. The XCKU035 family combines 444,343 logic cells with 19,456,000 embedded memory bits and as many as 468 I/O in this configuration. This resource density allows multiple parallel data paths to coexist within one device. The 784-ball package also supports high-density board escape routing, although its fine-pitch ball array requires careful PCB layout, controlled assembly, and comprehensive inspection. The -3 speed grade favors designs in which maximum logic performance is more important than lower power or cost. The -3SFVA784E ordering code identifies the device family, speed grade, package, and temperature or grade options. Programmable logic, DSP-oriented arithmetic, high-speed serial connectivity, and general-purpose I/O can be combined within the same Kintex UltraScale design. System designers should evaluate timing closure, power integrity, configuration storage, clocking, and transceiver requirements against their specific end product. Typical applications include high-speed data acquisition, industrial control, communications infrastructure, test and measurement, video processing, and high-throughput digital signal processing. The large logic and memory resources suit parallel algorithms, while the 468 I/O support extensive external connectivity. Projects with modest logic needs should use a smaller FPGA to reduce board area, power, and assembly complexity. PCB implementation is the central hardware consideration for this 784-ball device. Follow the AMD package pinout, recommended escape routing, and power-delivery guidance when defining the PCB stack-up. Validate high-speed nets, supply sequencing, configuration access, thermal paths, and assembly process controls before releasing production artwork. This page combines device-specific resource data, same-footprint alternatives, comparison parameters, and practical implementation guidance. It is designed to help engineers distinguish speed-grade and temperature-grade variants, prepare a pin-compatible replacement strategy, and select the appropriate Kintex UltraScale device for a complex FPGA system.

RFQ संपर्क
XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD
XCKU040-1FBVA676C

XCKU040-1FBVA676C - 530K-Cell Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU040-1FBVA676C is a Kintex UltraScale field-programmable gate array built on a 20 nm process, providing 530,250 logic cells, 21,606,000 RAM bits, and 312 user I/O in a 676-pin FCBGA package. The device operates from a 0.95 V core supply and is assigned the -1 speed grade. A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and high-speed serial transceivers. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and general-purpose processors because its parallel architecture can accelerate bitstream-defined data paths. The Kintex UltraScale family occupies the performance and resource range between smaller UltraScale devices and larger UltraScale+ devices. The XCKU040 resource totals include approximately 242,400 logic blocks or CLBs, 530,250 logic elements or cells, and 21,606,000 RAM bits. Its 312 user I/O support digital connectivity on the board, while the -1 speed grade identifies its timing and power class. These resources make the device suitable for parallel processing, protocol handling, image processing, data acquisition, and embedded control systems requiring deterministic hardware execution. The FCBGA package integrates 676 package connections and supports dense board-level routing needed for high-speed interfaces and programmable logic. Its 27 x 27 mm form factor is confirmed for the XCKU040-1FBVA676C. Because this is a high-pin-count BGA device, exact power delivery, escape routing, and differential-pair layout must follow the AMD package pinout files and the applicable device guidance rather than general BGA assumptions. Typical deployments include industrial vision, test and measurement, communications infrastructure, scientific instrumentation, and embedded signal-processing systems. In these applications, the FPGA can execute multiple parallel data paths in parallel, reduce external processor loading, and provide deterministic latency through fixed hardware pipelines. The 312 user I/O also permit direct interfacing with sensors, converters, memory, and network transceivers. Designers should verify power sequencing, decoupling, thermal performance, and high-speed signal integrity against the AMD documentation for the exact package and speed grade. A 676-pin FCBGA also requires careful PCB stack-up, via-in-pad or microvia strategy, and assembly process control. Confirm the pinout by device rather than inferring it from another XCKU040 package option. This page consolidates the verified resource totals, package characteristics, speed-grade designation, and practical design considerations for the XCKU040-1FBVA676C. It also distinguishes same-footprint alternatives by speed and temperature grade so engineers can identify a suitable replacement without overlooking device qualification requirements.

RFQ संपर्क
XCKU040-1FBVA900C - Kintex UltraScale FPGA | AMD
XCKU040-1FBVA900C

XCKU040-1FBVA900C - Kintex UltraScale FPGA | AMD

The AMD XCKU040-1FBVA900C is a Kintex UltraScale field-programmable gate array with 424,200 logic cells, 468 I/O sites, and a 900-pin FCBGA package. It is built on a 20 nm process and uses a nominal 0.95 V core voltage. The -1 speed designation identifies the performance grade, while the FBVA900C package code identifies the 900-ball surface-mount configuration. A field-programmable gate array, or FPGA, is a programmable semiconductor whose logic fabric, programmable input/output blocks, embedded memory, and dedicated hardware resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device, an integrated circuit, and a semiconductor. FPGAs are selected when designers need hardware parallelism, reconfigurable interfaces, high-speed serial connectivity, or adaptable logic without fabricating a custom ASIC. The XCKU040 device provides 424,200 programmable logic cells and 468 I/O sites in a 900-pin FCBGA package. Its 20 nm Kintex UltraScale architecture supports integration of programmable logic with high-speed serial transceivers, block RAM, DSP resources, and dedicated clocking resources. The 0.95 V nominal core voltage places the device in a performance-oriented logic family, although complete system operation requires the voltage rails, decoupling, clocking, configuration, and power-management solution specified by AMD. The -1 suffix is the speed grade and the C suffix denotes the applicable commercial temperature and product classification. The part number also identifies the exact package, ball count, and underlying device variant required for footprint matching. Because this is a large BGA package with hundreds of balls, PCB escape routing, via-in-pad or through-via fanout, solder mask control, and assembly thermal design are as important as the logic configuration. Typical uses for XCKU040-class Kintex UltraScale devices include high-speed data acquisition, programmable signal processing, network packet processing, test and measurement, industrial control, machine vision, and embedded high-performance computing. An AMD reference design identified as PMP10630 demonstrates a compact multi-rail power architecture for an XCKU040 FPGA, illustrating the system-level power complexity associated with this device. The principal design trade-off is performance capability versus board complexity. A 900-ball FCBGA supports a large pin and power budget, but it requires a dense multilayer PCB, controlled impedance routing, extensive decoupling, and careful power sequencing. Prototype validation should use AMD-compatible design tools, the official UltraScale package pinout files, and the manufacturer’s configuration and power-delivery guidance. This product analysis brings together the exact device identity, package characteristics, verified technical highlights, relevant application context, and design constraints that engineers must evaluate beyond the basic catalog description. It also distinguishes true package-compatible alternatives from nearby speed or package options that cannot replace the device without PCB redesign.

RFQ संपर्क
XCKU040-1FBVA900I - 530250-Cell Kintex UltraScale FPGA | AMD
XCKU040-1FBVA900I

XCKU040-1FBVA900I - 530250-Cell Kintex UltraScale FPGA | AMD

The AMD Xilinx XCKU040-1FBVA900I is a Kintex UltraScale field-programmable gate array with 530,250 logic cells, 468 user I/O, and a 900-ball FCBGA package. It is manufactured on 20 nm technology, operates from a 0.95 V core supply, and carries the industrial-temperature designation indicated by the I suffix. The -1 speed grade places the device in the entry performance tier of the XCKU040 family, while FBVA900 identifies its large 900-ball package and A900 package variant. A field-programmable gate array is a programmable-logic device whose configurable interconnect and logic resources implement digital functions after the device is manufactured. Within the broader hierarchy, an FPGA is a programmable logic device, a semiconductor, and a reconfigurable implementation platform. Kintex UltraScale devices combine scalable logic, memory, DSP, high-speed I/O, and dedicated clocking resources for systems requiring substantial parallel processing and deterministic data movement. The XCKU040-1FBVA900I is designed for industrial-temperature applications where a high pin count, 468 user I/O, and FPGA-scale programmable logic are important. Its 20 nm process implementation supports a 0.95 V core operating voltage, while the 900-ball package provides extensive signal access for high-bandwidth interfaces. The industrial suffix distinguishes its environmental qualification from commercial-temperature ordering codes, while the -1 grade identifies the device's performance class within the family. The 530,250-cell figure describes the device's programmable logic scale rather than a fixed number of independent processor cores. Designers can instantiate parallel datapaths, protocol engines, control logic, and hardware accelerators in one device, reducing the number of discrete components on complex digital platforms. Exact resource distributions, I/O standards, memory quantities, clocking limits, power data, and configuration requirements must be confirmed against the AMD device documentation for the final design. Typical implementation areas include industrial automation, high-speed communications, instrumentation, test and measurement, embedded control, signal processing, and adaptable compute platforms. In these systems, the large I/O count can support multiple interfaces and parallel buses, while the large logic fabric can consolidate functions that would otherwise require several discrete programmable or fixed-function devices. Board design must account for the 900-ball package, power sequencing, decoupling, configuration storage, thermal management, and high-speed routing. For a new Kintex UltraScale design, confirm the required package, speed grade, temperature range, supported I/O standards, power budget, and development-tool compatibility before schematic capture. For an existing XCKU040-1FBVA900I board, use the AMD package pinout files and device documentation when assigning every ball, power rail, configuration signal, and I/O constraint. This page combines the verified device identity with practical replacement, application, and PCB-planning guidance. It distinguishes documented XCKU040 family variants from unsupported substitutions and emphasizes that a true drop-in replacement must preserve the 900-ball footprint, electrical requirements, speed grade, temperature grade, and pin compatibility.

RFQ संपर्क
XCKU040-1SFVA784C - 530K Logic Cell Kintex UltraScale FPGA | AMD
XCKU040-1SFVA784C

XCKU040-1SFVA784C - 530K Logic Cell Kintex UltraScale FPGA | AMD

The AMD XCKU040-1SFVA784C is a Kintex UltraScale field-programmable gate array with 530,250 logic elements, 468 I/O, and 784-ball BFBGA packaging in a square FCCSP configuration. The device combines programmable logic resources, high-speed programmable I/O, dedicated memory, programmable clocking, and hard processing resources in one FPGA package. Its 784-BFBGA footprint supports dense designs requiring substantial interconnect bandwidth and pin access. A Kintex UltraScale FPGA is a semiconductor in the FPGA and CPLD family, which sits between fixed-function logic and software-programmable processors. Unlike an ASIC, an FPGA permits configuration-time changes to logic, memory organization, pin functions, and interfaces. Unlike a processor-centric system, it implements parallel datapaths directly in programmable hardware, reducing latency for tasks such as protocol termination, signal processing, storage interfacing, and data movement. The listed device provides 530,250 logic elements and 468 I/O, giving an architecture-oriented balance between compute capacity and external connectivity. The 468 available I/O can support high-pin-count interfaces, although designers must account for dedicated configuration, power, clock, and ground assignments when planning a board. Its -1 speed designation identifies a specific performance grade, while the 784-ball package provides the physical interface for power delivery, configuration, differential I/O, and internal fabric connectivity. The XCKU040 device belongs to the Kintex UltraScale generation, where programmable logic resources combine with dedicated hard blocks for memory and high-speed serial or parallel data movement. This mixed architecture is useful when a design needs both flexible control logic and deterministic parallel throughput. Exact core voltage, power envelope, RAM capacity, transceiver configuration, supported clocking resources, and static timing values should be established from the applicable AMD product documentation and device-specific implementation tools. Typical uses include industrial control and automation, network packet processing, test and measurement, high-speed storage interfaces, embedded vision, telecommunications equipment, and defense or aerospace platforms requiring programmable logic density. The 468-I/O count is particularly useful for designs combining multiple buses, sensor inputs, converters, memory interfaces, and communication links on a single board. PCB implementation should treat the 784-BFBGA package as a demanding fine-pitch design. Use the AMD package pinout and PCB library, provide a power and ground plane architecture appropriate for the complete device, and route high-speed interfaces according to the selected bank constraints. Confirm voltage compatibility, decoupling, configuration access, thermal performance, and all unused balls before releasing artwork for fabrication. This page consolidates the exact package and logic figures, verified sourcing links, pin-compatible Kintex UltraScale options, application guidance, and engineering-focused comparison points. It also distinguishes documented device facts from parameters that require the AMD datasheet, product selection guide, and Vivado implementation results before a production design is approved.

RFQ संपर्क
XCKU040-1SFVA784I - 530K Logic FPGA, 784-BGA | AMD
XCKU040-1SFVA784I

XCKU040-1SFVA784I - 530K Logic FPGA, 784-BGA | AMD

The AMD XCKU040-1SFVA784I is a Kintex UltraScale field-programmable gate array featuring 530,250 logic elements, 30,300 logic array blocks and configurable logic blocks, 21,606,000 RAM bits, and 468 user I/O pins in a 784-FCBGA package. It operates from a 0.922 V to 0.979 V supply range and is built on 20 nm FPGA technology. A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and I/O behavior are configured after manufacture. The Kintex UltraScale family sits between FPGA performance and programmable logic device cost, combining substantial programmable resources with dedicated high-speed I/O and hardened interface capabilities. XCKU040-1SFVA784I is intended for designs requiring a large fabric, extensive parallel connectivity, and numerous user I/O rather than a small general-purpose microcontroller. The -1 speed grade identifies the device's performance class, while the SFVA784 package code identifies the 784-ball flip-chip ball-grid-array configuration. With 468 user I/O pins, the device can support substantial external connectivity. Its 21,606,000 RAM bits provide on-chip storage for packet buffering, data acquisition, video processing, control logic, and general-purpose FPGA workloads. The industrial temperature specification covers junction temperatures from -40 °C to 100 °C. The 20 nm Kintex UltraScale architecture combines programmable logic resources with dedicated resources for high-speed serial links, memory interfaces, and DSP-oriented processing. Engineers use the device for protocols, data acquisition, test equipment, industrial control, communications infrastructure, and embedded signal-processing systems. Device configuration, timing constraints, clocking, and I/O standards must be implemented through the associated AMD FPGA design flow. Typical deployments include high-speed network interfaces, radar and aerospace signal-processing platforms, factory automation controllers, high-resolution imaging systems, and telecommunications equipment. The 468 user I/O pins are especially useful where a design combines wide parallel buses with high-speed serial links. A 784-FCBGA package also demands careful PCB planning, including escape routing, power delivery, thermal management, and assembly-process compatibility. The principal design consideration is package complexity. A 784-ball BGA requires a dense multilayer PCB with controlled impedance, via-in-pad or escape routing, and accurate assembly alignment. Power rails must support the stated 0.922 V to 0.979 V operating range, and junction temperature must remain within the industrial limit. Use the AMD package pinout files and UltraScale design documentation when assigning every ball and power plane. This page combines the exact device specifications, package information, pin-compatible family alternatives, application guidance, and practical PCB considerations to support component selection and hardware planning without relying on the manufacturer datasheet alone.

RFQ संपर्क
XCKU040-2FBVA676E 530250-Cell Kintex UltraScale FPGA | AMD
XCKU040-2FBVA676E

XCKU040-2FBVA676E 530250-Cell Kintex UltraScale FPGA | AMD

The AMD XCKU040-2FBVA676E is a Kintex UltraScale field-programmable gate array with 530,250 logic cells, 21,606,000 RAM bits, 312 user I/Os, and a 676-ball FCBGA package. It combines programmable logic, block RAM, DSP resources, programmable I/O, and high-speed connectivity on a 20 nm device platform. A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and interface functions are configured after manufacture. The FPGA hierarchy extends from configurable logic blocks and programmable I/O to system-level functions such as hardware acceleration, network interfaces, and embedded control. Kintex UltraScale devices occupy the middle of the AMD/Xilinx product portfolio between lower-cost UltraScale devices and higher-end Virtex UltraScale devices. Three headline resources define the XCKU040-2FBVA676E: 530,250 programmable logic cells, 21.606 million RAM bits, and 312 user I/Os. The -2 speed designation identifies its performance grade, while FBVA676 specifies the 676-ball fine-pitch BGA package. The package is designed for multilayer PCB construction where controlled power, ground, and high-speed routing are essential for reliable operation at FPGA switching speeds. The device is suitable for parallel processing, protocol termination, high-speed data capture, video processing, wireless infrastructure, and embedded systems requiring substantial programmable logic. Its 676-ball FCBGA footprint provides more I/O and power connectivity than lower-pin-count packages, enabling wide parallel interfaces and multiple high-speed transceivers. The 20 nm process generation supports a strong balance of logic density, memory bandwidth, power efficiency, and design flexibility. For communications equipment, the FPGA can implement datapath control, packet classification, aggregation, and interface conversion in one programmable device. Video and machine-vision systems can use parallel logic for pixel processing, while industrial control systems can combine deterministic interfaces with configurable logic. In test equipment, the device can generate or analyze high-volume digital data and implement protocol-specific logic without relying on a fixed-function ASIC. PCB design requires careful separation of power and ground planes, short return paths for high-speed signals, and pin-compatible fanout from the BGA. Decoupling should be distributed near the package power balls, while differential and serial channels require length-aware routing and continuous reference planes. The AMD UltraScale package pinout files and UG575 should be used directly when assigning every ball, configuring power rails, and validating board escape routing. This product page combines the device resource summary, package constraints, drop-in alternatives, application guidance, and practical design checks. It is intended to help engineers determine whether the Kintex UltraScale architecture, -2 speed grade, 312 I/O count, and 676-ball footprint match a specific system requirement before beginning schematic capture or PCB layout.

RFQ संपर्क
XCKU040-2FBVA676I - 424K Kintex UltraScale FPGA | AMD
XCKU040-2FBVA676I

XCKU040-2FBVA676I - 424K Kintex UltraScale FPGA | AMD

AMD XCKU040-2FBVA676I is a Kintex UltraScale field-programmable gate array with 424,200 logic cells, 312 user I/Os, a -2 speed grade, and a 676-BBGA FCBGA package. It is manufactured on 20 nm technology and uses a 0.95 V core supply. The device combines programmable logic, fixed and configurable I/O resources, embedded memory, high-speed serial connectivity, and dedicated processing resources in one package. An FPGA is a semiconductor whose digital circuit is configured after manufacture. A Kintex UltraScale belongs to the FPGA and adaptive-computing hierarchy, where programmable logic can accelerate parallel algorithms, implement communication interfaces, consolidate functions, and adapt to changing field requirements. Compared with a fixed-function ASIC, an FPGA allows design revisions through configuration rather than fabrication changes. The XCKU040-2FBVA676I offers 424,200 programmable logic cells and 312 user I/O in the industrial -2 speed-grade configuration. Its 676-BBGA FCBGA package supports high-density interconnection and is intended for demanding boards requiring substantial logic, memory resources, and external interface bandwidth. The -2 designation identifies the device's performance class within the Kintex UltraScale family. Kintex UltraScale devices combine programmable logic fabric with high-speed transceivers, memory interfaces, clocking resources, and hardened processing blocks. The 20 nm implementation and 0.95 V VCCINT operating point place substantial performance and power requirements on board-level power delivery. Configuration, programming, clock distribution, transceiver equalization, and I/O standards must therefore be treated as one integrated design problem rather than separate FPGA concerns. Typical uses include high-throughput signal processing, industrial networking, data acquisition, test and measurement, video infrastructure, communications equipment, and embedded processing accelerators. In these systems, the FPGA's parallel architecture can execute multiple lanes or filtering stages concurrently, while programmable I/O supports specialized interfaces. Design teams should select board-level transceivers, regulators, memory, and connectors that satisfy the signal-integrity and power-delivery limits for the selected I/O standards. A critical implementation concern is package and power integrity. The 676-BBGA device requires a dense multilayer PCB, careful escape routing, adequate thermal vias under the package, and decoupled supply rails. Add the exposed thermal pad or thermal-via structure specified by the package drawing, and verify every voltage rail against the AMD XCKU040 device documentation before schematic capture. This product record combines the verified device identity, package, logic-cell count, I/O count, technology node, voltage, and speed grade with practical guidance for FPGA selection, PCB implementation, power delivery, and migration. It is intended to help engineers identify the correct AMD/Xilinx device and plan a board-level design without confusing speed-grade, package, or lifecycle differences.

RFQ संपर्क
XCKU040-2FBVA900E - 530K-Cell Kintex UltraScale FPGA | AMD
XCKU040-2FBVA900E

XCKU040-2FBVA900E - 530K-Cell Kintex UltraScale FPGA | AMD

The AMD XCKU040-2FBVA900E is a Kintex UltraScale field-programmable gate array built on a 20 nm process, with 530,250 logic cells, 468 user I/Os, and 21,606,000 RAM bits in a 900-ball FCBGA package. It operates from a 0.95 V core supply and is designed for high-performance programmable-logic systems that require substantial parallel processing, high-speed serial connectivity, and deterministic programmable logic. A field-programmable gate array is a programmable-logic device that can be configured after manufacture to implement digital functions. Within the product hierarchy, this Kintex UltraScale device combines configurable logic blocks, block RAM, DSP resources, programmable input/output, and high-speed transceivers. The UltraScale architecture places these resources in a fabric designed for scalable data paths, making the device suitable for systems that need more flexibility than a fixed application-specific integrated circuit. Key device attributes include 530,250 logic cells, 30,300 logic-array blocks or configurable logic blocks, 468 user I/Os, and 21,606,000 bits of block RAM. The device uses a 0.95 V core supply and is manufactured in a 20 nm process. Its 900-ball flip-chip ball-grid-array package provides 31 mm by 31 mm body dimensions and supports a large pin count for power distribution, configuration, memory interfaces, transceivers, and general-purpose I/O. The -2 designation identifies the device’s performance-grade option within the XCKU040 family, while the final E suffix identifies the associated package and temperature-grade ordering variant. The 900-ball FCBGA footprint is intended for multilayer printed-circuit boards with controlled escape routing and power-delivery networks. Exact transceiver rates, maximum I/O standards, configuration characteristics, power consumption, and operating-temperature limits should be selected from the manufacturer’s device tables and package documentation. Typical applications include high-speed network packet processing, industrial control and automation, high-performance computing, test and measurement equipment, machine vision, signal processing, and adaptable accelerator logic. The large logic and RAM resources allow parallel algorithms to be implemented in programmable hardware, while the 468 user I/Os support interfaces to external memory, converters, transceivers, clocks, and board-level control signals. PCB implementation requires careful attention to ball-grid-array escape routing, layer transitions, power-plane geometry, decoupling, thermal management, and high-speed signal integrity. The 31 mm by 31 mm package also demands a controlled board-construction process because power delivery and thermal performance are tightly coupled in large FPGA designs. This page combines the exact orderable MPN, verified package and resource details, application guidance, comparison criteria, and practical design considerations. It also distinguishes package-compatible family variants from devices that require a different footprint, allowing engineering teams to assess replacement options without confusing functional similarity with true drop-in compatibility.

RFQ संपर्क
XCKU040-2FBVA900I - Kintex UltraScale FPGA | AMD
XCKU040-2FBVA900I

XCKU040-2FBVA900I - Kintex UltraScale FPGA | AMD

The AMD XCKU040-2FBVA900I is a Kintex UltraScale field-programmable gate array built on a 20 nm process, with 424,200 programmable logic cells, 468 user I/O, and a 900-ball FCBGA package. It operates from a 0.95 V core supply and is graded for industrial-temperature equipment. The device combines programmable logic, DSP resources, block RAM, high-speed serial connectivity, and hard processing blocks in one programmable device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, and signal-processing functions can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, embedded memory, dedicated DSP blocks, programmable input/output, and clocking resources. This makes it suitable when system functions must be updated, parallelized, or implemented with hardware-level timing rather than fixed application-specific logic. The XCKU040 provides 424,200 logic cells and 468 user I/O in a 900-ball FCBGA package. The -2 speed designation identifies the device's performance grade within the Kintex UltraScale family. Its 0.95 V core voltage reflects the use of advanced process technology, while the large I/O count supports interfaces to external memory, network transceivers, converters, and parallel digital systems. The Kintex UltraScale architecture integrates dedicated DSP, block RAM, memory controllers, high-speed transceivers, and security features. These resources allow designers to implement parallel signal processing, data acquisition, packet processing, and accelerator logic in a single device. Because the fabric is programmable, the same hardware platform can accommodate different algorithms and interface configurations when field updates are important. Typical applications include 5G and wireless infrastructure, high-speed networking, industrial vision, test and measurement, machine-learning accelerators, DSP processing, and high-performance embedded systems. The industrial grade and large I/O count are especially useful for equipment that must combine extensive parallel connectivity with programmable real-time processing. Board design requires careful attention to the 900-ball FCBGA footprint, multilayer power distribution, high-speed routing, decoupling, clocking, and thermal performance. Follow the AMD package pinout files and UltraScale design guidance to assign every ball and validate the power, clock, and transceiver configuration before fabrication. This product page consolidates the exact MPN identity, package information, selection guidance, drop-in family alternatives, comparison data, and practical design notes needed to evaluate the XCKU040-2FBVA900I for a new programmable-logic design.

RFQ संपर्क
XCKU040-2FFVA1156I - Kintex UltraScale FPGA 520 I/O | AMD
XCKU040-2FFVA1156I

XCKU040-2FFVA1156I - Kintex UltraScale FPGA 520 I/O | AMD

The AMD XCKU040-2FFVA1156I is a Kintex UltraScale FPGA with 520 user I/O, 21,606,000 system logic capacity, 530,250 DSP-equivalent resource units, speed grade -2, in a 1156-ball FCBGA package rated for industrial temperatures of -40C to +100C. A Field Programmable Gate Array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks (CLBs), DSP slices, block RAM, and programmable interconnect that designers configure after manufacturing. Within the power-management hierarchy of digital system ICs, an FPGA sits at the top of the programmable logic taxonomy: programmable logic device (PLD) -> FPGA -> system-on-chip FPGA. FPGAs are used where custom logic, parallelism, or post-deployment reconfigurability is required that fixed-function ASICs or microcontrollers cannot provide. Key features of the XCKU040-2FFVA1156I include the 20nm UltraScale architecture, which lowers total power consumption versus the previous 28nm 7-series generation, a -2 speed grade for high-performance designs, and an industrial (I-suffix) temperature rating of -40C to +100C. The 1156-ball flip-chip BGA provides 520 user I/O for high-bandwidth parallel interfaces, and the fabric includes MMCM and PLL clock management resources. On the technical side, the Kintex UltraScale family focuses on price/performance using monolithic 20nm die. The device core supply operates from 0.922V to 0.979V per the datasheet listing. The UltraScale architecture adds enhanced routing, higher DSP throughput, and improved clocking compared to Kintex-7, making the XCKU040 a popular mid-density choice between the XCKU035 and XCKU060. Typical applications include industrial image processing and machine vision, wireless baseband and RF front-end processing, medical ultrasound, and ASIC prototyping. The 520 I/O count suits multi-camera sensor aggregation and high-width data converters. Design consideration: FCBGA-1156 devices require careful PCB stackup design - escape routing under the 1.0mm ball pitch typically needs via-in-pad or at least 8 layers, and core voltage rails must meet the tight 0.922-0.979V tolerance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
XCKU040-2SFVA784E - 530K Logic Cells FPGA | AMD
XCKU040-2SFVA784E

XCKU040-2SFVA784E - 530K Logic Cells FPGA | AMD

The AMD XCKU040-2SFVA784E is a Kintex UltraScale FPGA with 530,000 system logic cells, 21,606 Kb of block RAM and 1,920 DSP slices in a 784-FCCSP BGA package. The -2 speed grade targets performance-oriented designs, while the extended-temperature suffix supports a 0°C to 100°C junction range. A field-programmable gate array is a programmable digital logic device within the broader FPGA and semiconductor hierarchy. Instead of implementing fixed Boolean logic in an ASIC, an FPGA combines configurable LUTs, routing resources, block RAM, DSP blocks and programmable I/O. This allows designers to implement parallel data processing, protocol bridging, control logic and high-speed interfaces on one integrated circuit. The XCKU040 device provides 530,000 system logic cells and 1,920 DSP slices, giving it substantial parallel arithmetic capacity. Its 21,606 Kb of block RAM supports buffering, packet storage and data-plane workloads. The SFVA784 package provides 468 I/O according to the product listing, enabling high pin-count connectivity for high-speed networking, industrial processing and test equipment. The package measures 23 mm by 23 mm. The 20 nm Kintex UltraScale architecture combines programmable logic with dedicated DSP, memory and high-speed I/O resources. The -2 performance designation identifies the device speed grade, while E identifies the extended-temperature product configuration. Bank-specific I/O standards and pin placement must be selected from the AMD package files when implementing memory interfaces, serial links or other high-speed peripherals. Typical uses include 100G networking equipment, industrial vision and control systems, signal-processing platforms, high-performance computing and communications infrastructure. The 468-I/O package is particularly useful when a design requires substantial parallel connectivity, multiple memory interfaces or high lane counts. The 1,920 DSP slices also suit filtering, modulation, FFT and other multiply-accumulate intensive operations. PCB implementation requires careful power delivery, decoupling and ball-grid-array layout. Follow the AMD package pinout files and UltraScale layout guidance for exact ball assignments. Provide continuous power and ground planes, place decoupling capacitors close to supply balls, and verify thermal performance across the full 0°C to 100°C junction range. This product page combines the verified device configuration, package details, search-driven technical queries, drop-in family options and practical implementation guidance. These resources help engineers identify the correct XCKU040 package and speed grade while planning resources, pin assignments, power delivery and replacement decisions.

RFQ संपर्क
XCKU040-2SFVA784I - Kintex UltraScale FPGA, 468 I/O | AMD
XCKU040-2SFVA784I

XCKU040-2SFVA784I - Kintex UltraScale FPGA, 468 I/O | AMD

AMD XCKU040-2SFVA784I is a Kintex UltraScale field-programmable gate array with 468 I/O, a -2 performance speed grade, and a 784-BFBGA FCCSP package. The device combines programmable logic, fixed resources, high-speed I/O, and system-level connectivity for demanding communications, industrial, networking, and embedded-processing systems. Its 20 nm process technology supports an efficient balance between logic density, signal integrity, and power efficiency. A field-programmable gate array is a reconfigurable digital semiconductor whose logic, interconnect, and I/O behavior are configured after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, while a Kintex UltraScale FPGA adds advanced DSP, memory, high-speed I/O, clocking, and system integration capabilities. This makes the XCKU040 suitable when fixed logic would be inflexible and a software-driven processor would not provide sufficient deterministic parallelism or timing performance. Key features include 468 available I/O, the -2 speed grade, a 784-ball BFBGA package, and operation across the industrial temperature range of -40 °C to 100 °C junction temperature. The -2 grade provides higher static performance than the -1 grade and sits below the -3 grade in the documented Kintex UltraScale speed ordering. The large I/O count supports interfaces to memory, networking, accelerators, control logic, and external peripheral devices. The device belongs to the XCKU040 Kintex UltraScale family, whose programmable resources support parallel datapaths, protocol handling, signal processing, and control-plane functions. Although the package exposes a large number of connections, a complete board design still depends on the selected bank voltage, memory interface, clocking architecture, pin assignments, and device-specific configuration. High-performance BFBGA packages also require careful power delivery, via-in-pad and through-via strategy, thermal design, and assembly-process control. Typical applications include network packet processing, industrial automation, high-speed data acquisition, fixed-function accelerators, embedded vision, telecommunications infrastructure, and test equipment. In these systems, the FPGA can implement parallel logic directly in hardware, reducing processor overhead and supporting deterministic timing. The 468-I/O resource can also divide into multiple banks, allowing a designer to interface logic, memory, and external circuitry while respecting voltage and timing constraints. A key design consideration is that changing speed grade does not change the basic device family, but it can alter timing margins and power characteristics. Verify the complete Vivado design, pin constraints, power estimates, and board-level timing before substituting a different grade. For the -2 device, use the AMD documentation package and board-design guidance for SFVA784 power, decoupling, configuration, and thermal implementation. This page combines the verified device identity, package, I/O, temperature, and speed-grade information with practical application guidance, comparison parameters, and design considerations for engineers planning an SFVA784 Kintex UltraScale implementation.

RFQ संपर्क
XCKU040-3FBVA676E - Kintex UltraScale FPGA | AMD
XCKU040-3FBVA676E

XCKU040-3FBVA676E - Kintex UltraScale FPGA | AMD

The AMD XCKU040-3FBVA676E is a Kintex UltraScale field-programmable gate array with 312 user I/O sites in a 676-ball FCBGA package. The -3 speed grade provides the highest performance option in the XCKU040 family, while the -3FBVA676E ordering code identifies the commercial-temperature, standard-voltage device configuration. It is intended for designs requiring parallel programmable logic, high-speed serial connectivity, substantial on-chip memory, and deterministic accelerator pipelines within a single FPGA package. A field-programmable gate array is a semiconductor whose digital logic blocks, routing, block RAM, and programmable I/O can be configured after manufacture. The Kintex UltraScale family extends this programmable-device concept into ASIC-like parallel processing systems. Within the FPGA hierarchy, the XCKU040 belongs to the Kintex UltraScale product line, combines FPGA fabric with dedicated high-speed serial resources, and is positioned between lower-density programmable logic and the largest ASIC-class devices. Key characteristics of the XCKU040-3FBVA676E include 312 I/O, a 676-ball FCBGA package, and the -3 performance grade. The large ball count supports a substantial interface complement, while the Kintex UltraScale architecture is suited to high-throughput datapaths requiring wide parallel transfers. The package uses ball-grid technology rather than perimeter leads, supporting dense routing of power, ground, configuration, and user signals across the device. Detailed logic-cell, memory, and high-speed transceiver counts should be taken from the current AMD Kintex UltraScale data sheet and product-selection tables for the exact device variant. The -3 suffix denotes the highest performance grade offered for XCKU040 devices, making this ordering option appropriate when timing closure must be achieved at demanding clock rates. Designers should distinguish device speed grade, package suffix, and operating-temperature designation when comparing orderable parts: changing the speed grade changes timing characteristics, while changing the package changes the PCB land pattern and may also change the power-management design. Typical deployments include high-throughput data processing, network packet handling, high-performance computing accelerators, video and image pipelines, telecommunications infrastructure, and industrial systems that consolidate multiple fixed-function blocks into one programmable device. The 312 I/O sites are useful for parallel control planes, external memory interfaces, and general-purpose peripheral connections, while dedicated UltraScale resources support high-speed serial links. PCB design requires careful attention to the 676-ball FCBGA footprint, multilayer board construction, power-plane integrity, and via access beneath the device. Use the AMD package pinout files and board-design guidance to assign every ball, and validate high-speed interfaces with the vendor-recommended constraints. Because the ball grid hides most connections under the package, PCB inspection and test-point planning are especially important after assembly. This page organizes the verified package, interface, and family information into an engineering-focused reference and separates device-selection facts from application guidance. It also identifies same-package XCKU040 ordering options for migration planning while directing designers to AMD documentation for authoritative ball assignments, timing limits, and power budgets.

RFQ संपर्क
XCKU040-3FBVA900E - 530K Logic Cell Kintex UltraScale FPGA | AMD
XCKU040-3FBVA900E

XCKU040-3FBVA900E - 530K Logic Cell Kintex UltraScale FPGA | AMD

The Advanced Micro Devices XCKU040-3FBVA900E is a Kintex UltraScale field-programmable gate array with 530,250 logic elements, 30,300 logic array blocks, and a 900-pin FCBGA package. The device is built on a 20 nm process, operates from a 0.95 V core supply, and uses speed grade -3 for performance-oriented programmable-logic designs. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, memory resources, and signal-processing blocks can be programmed after manufacture. FPGAs belong to the programmable-logic and semiconductor hierarchies and are widely used when designs require parallel processing, adaptable hardware, high I/O density, or faster development cycles than fixed-function ASICs. The Kintex UltraScale family combines programmable logic with high-speed serial connectivity, memory, DSP, and clocking resources. The XCKU040-3FBVA900E provides 530,250 logic elements and 30,300 logic array blocks, creating substantial capacity for data-path, control, networking, signal-processing, and accelerator logic. Its 900-pin FCBGA package supports a very large pin count for high-bandwidth designs. The -3 suffix identifies the performance grade, while the final E suffix identifies the extended-temperature product associated with this ordering code. This FPGA is appropriate when a design needs substantially more parallel logic than smaller programmable devices, but does not require the absolute capacity of the largest UltraScale devices. Its architecture can support multiple high-speed data paths, protocol bridges, digital signal-processing pipelines, and hardware accelerators. The 20 nm manufacturing process and Kintex UltraScale resource mix position the device between general-purpose FPGAs and very large system-FPGA implementations. Typical uses include industrial automation, test and measurement, high-performance computing, aerospace and defense systems, video processing, and communications infrastructure. In these applications, programmable logic can implement parallel interfaces, acquisition pipelines, protocol conversion, low-latency control, or hardware acceleration while allowing product updates after deployment. PCB design requires careful attention to the 900-ball land pattern, power delivery, ground-plane continuity, and high-speed signal routing. The 0.95 V core rail and numerous supply domains should be designed with the decoupling and power-plane requirements defined in the manufacturer package, board-design, and device guidance. Use the AMD UltraScale package device pinout files for the authoritative ball assignments and PCB library geometry. This page combines the identified device characteristics, same-package speed and temperature alternatives, comparison parameters, and practical implementation guidance. It is intended to accelerate engineering selection while keeping the distinction between confirmed electrical data and package-level items that require the manufacturer pinout files.

RFQ संपर्क
XCKU040-3SFVA784E 468-I/O Kintex UltraScale FPGA | AMD
XCKU040-3SFVA784E

XCKU040-3SFVA784E 468-I/O Kintex UltraScale FPGA | AMD

AMD XCKU040-3SFVA784E is a Kintex UltraScale field-programmable gate array with 468 I/O, 53,025 logic cells, and a 21,606,000-gate implementation capacity, supplied in a 784-ball FCBGA package. It combines programmable logic, high-speed I/O, embedded memory, programmable clocking, and dedicated resources for demanding parallel-processing and signal-processing systems. The -3 designation identifies the device speed grade, while SFVA784 identifies its 784-ball package and pin arrangement. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices and provides a hardware-level alternative to implementing extensive functions in software. Kintex UltraScale devices combine substantial parallel logic capacity with high-performance fabric resources, making them suitable for demanding signal processing, data acquisition, communications, and embedded systems. The XCKU040 device provides 468 user I/O and a 21,606,000-gate implementation capacity in one package. Its 784-ball FCBGA format supports dense, high-speed PCB layouts, while the 53,025 logic-cell figure identifies the logical resource scale of the selected family member. The -3 speed suffix supports performance-oriented designs where deterministic parallel operation and interface bandwidth are important. Configuration, clocking, power-management, and I/O implementation should follow the AMD UltraScale design guidance. Kintex UltraScale devices integrate programmable logic with selectable I/O standards, clock-management resources, block RAM, DSP resources, and dedicated networking or accelerator blocks. This combination allows one device to consolidate functions that might otherwise require several discrete devices. Designers can assign interfaces according to system timing constraints, derive multiple internal clocks, and place data-processing pipelines in parallel rather than executing every operation sequentially. Typical applications include high-speed data acquisition, industrial image processing, communications infrastructure, test and measurement systems, embedded control, and high-throughput digital signal processing. A designer can use the Kintex UltraScale fabric for parallel algorithms while assigning appropriate banks to memory, clocks, serial links, and external interfaces. Final resource allocation depends on the selected I/O standards, memory interface requirements, timing constraints, and device configuration. The 784-ball FCBGA package requires careful PCB layout, power planning, decoupling, and thermal design. Follow the AMD package pinout files and UG575 guidance when assigning every ball, configuring the power rails, and routing high-speed interfaces. Validate signal integrity, power sequencing, and junction-temperature margins before releasing the PCB for fabrication. This page combines the exact device identity and package information with practical guidance for FPGA resource planning, PCB implementation, lifecycle sourcing, and equivalent-part evaluation. It also distinguishes speed-grade and temperature-grade options so engineers can assess replacement risk before changing a production design.

RFQ संपर्क
XCKU11P-1FFVD900E - Kintex UltraScale+ FPGA | AMD
XCKU11P-1FFVD900E

XCKU11P-1FFVD900E - Kintex UltraScale+ FPGA | AMD

The AMD XCKU11P-1FFVD900E is a Kintex UltraScale+ field-programmable gate array with 653,100 programmable logic cells in a 900-BBGA FCBGA package. It is the -1 speed-grade member of the XCKU11P family and is identified by the 1FFVD900E ordering code. The device combines programmable logic, fixed or configurable I/O resources, block RAM, DSP resources, and high-speed serial transceivers within one FPGA package. An FPGA is a semiconductor whose digital logic is configured after manufacture. The FPGA hierarchy includes programmable logic arrays, look-up tables, flip-flops, routing fabric, dedicated memory, DSP arithmetic blocks, transceivers, and I/O resources. Compared with an application-specific integrated circuit, an FPGA allows designers to adapt interfaces, parallel processing, protocol handling, and hardware acceleration without changing the physical silicon. The XCKU11P-1FFVD900E is identified in product listings as a 653,100-cell Kintex UltraScale+ device using a 900-BBGA FCBGA package. Its large logic and routing capacity supports parallel data processing, custom accelerators, protocol bridging, high-speed interface termination, and embedded control functions. The -1 ordering suffix denotes the device speed grade, while the final package, temperature, and qualification codes require validation against the applicable AMD ordering guide before a new PCB or production release. UltraScale+ FPGAs combine programmable logic with DSP processing resources and serial transceiver capability. These resources allow high-throughput designs to combine parallel datapaths with high-speed serial links instead of separating those functions into multiple devices. Exact transceiver count, I/O count, memory totals, power ratings, and operating-temperature limits are not reproduced in the available product records and must be taken from the package-specific AMD device documentation. Typical uses include PCIe-connected accelerator systems, industrial data acquisition, high-speed networking, test and measurement equipment, and defense or aerospace processing platforms. For these applications, the device is commonly configured through AMD Vivado or compatible programming tools, while the 900-BBGA footprint requires careful PCB escape routing, thermal analysis, and multilayer interconnect planning. The principal design consideration is package complexity. A 900-BBGA device has a dense ball array that requires fine-pitch PCB design rules, via-in-pad or escape-routing strategies, controlled impedance, and effective heat removal. The exact pinout, power rails, decoupling requirements, and exposed thermal lands must be assigned directly from the AMD package pinout files. This page combines the exact orderable identifier, package information, price evidence, comparison criteria, and practical integration guidance. It also distinguishes a documented same-package device from cross-architecture FPGA options that are not true drop-in replacements, helping engineers avoid treating broadly similar programmable logic devices as electrically or mechanically interchangeable.

RFQ संपर्क
XCKU11P-L1FFVE1517I Kintex UltraScale+ FPGA | AMD
XCKU11P-L1FFVE1517I

XCKU11P-L1FFVE1517I Kintex UltraScale+ FPGA | AMD

The AMD XCKU11P-L1FFVE1517I is a Kintex UltraScale+ field-programmable gate array with 653,100 logic elements, 53,964,800 RAM bits, and 512 I/O ports, housed in a 1517-BBGA FCBGA package. It is designed for high-performance programmable systems that combine parallel logic, embedded memory, high-speed serial connectivity, and extensive I/O in one device. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and other configurable functions are defined after manufacture. An FPGA belongs to the programmable-logic hierarchy and the broader embedded-semiconductor category. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed to implement parallel processing, protocol bridging, hardware acceleration, control, test, or signal-processing functions. The Kintex UltraScale+ device provides 37,320 LABs or CLBs in the closely related XCKU11P-2 grade, 653,100 logic elements, and 53,964,800 RAM bits. Its 512 I/O positions support substantial external connectivity. The XCKU11P-L1 designation identifies the specific grade, while FFVE1517 identifies its 1517-FCBGA package configuration and device characteristics. These resources make the device appropriate for parallel datapaths, embedded-memory-intensive processing, and interface-rich control systems. FPGA performance depends on the complete system design rather than logic-element count alone. Clocking, power delivery, memory interfaces, high-speed transceivers, PCB routing, and device configuration all influence realized performance. The 1517-FCBGA package also requires careful escape routing and power-plane design. Designers should follow the AMD package pinout files, UltraScale+ packaging guidance, and schematic and layout recommendations when assigning balls and planning the power distribution network. Typical uses include network interface equipment, industrial automation, high-speed data acquisition, communications infrastructure, embedded processing, and defense-oriented control systems. In these applications, programmable logic can accelerate parallel algorithms, consolidate interface functions, or provide flexible field updates. The device is especially relevant when deterministic parallel throughput and a high pin count are more important than minimizing unit cost or package size. The most important design consideration is to validate the complete power, thermal, signal-integrity, and pin-assignment plan before layout. The 1517-BBGA package has many power and ground balls, so layer transitions, via placement, plane splitting, decoupling, and auxiliary-power sequencing require careful coordination. Use the AMD pinout files as the authoritative source when creating the symbol, footprint, and escape-routing constraints. This page combines exact device characteristics with package guidance, same-family replacement analysis, and engineering-focused selection criteria. It also highlights which parameters require confirmation from AMD documentation, helping engineers distinguish true pin-compatible choices from parts that merely belong to the broader Kintex UltraScale+ family.

RFQ संपर्क
XCKU13P-1FFVE900E - Kintex UltraScale+ FPGA | AMD
XCKU13P-1FFVE900E

XCKU13P-1FFVE900E - Kintex UltraScale+ FPGA | AMD

The AMD XCKU13P-1FFVE900E is a Kintex UltraScale+ field-programmable gate array with 304 I/O positions, supplied in a 900-BBGA FCBGA package. It is designed for parallel processing, programmable logic, high-speed interconnect, and embedded systems requiring a large FPGA fabric, substantial on-chip memory, and high-speed serial connectivity. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O functions are configured after manufacture. The Kintex UltraScale+ family belongs to the broader hierarchy of programmable logic devices, alongside FPGAs, complex programmable logic devices, and application-specific integrated circuits. Its parallel architecture allows multiple independent processing pipelines to operate simultaneously, making it suitable for demanding data-processing and interface systems. The device provides 304 I/O positions and uses a 900-ball flip-chip ball-grid-array package for dense board-level interconnection. The -1 ordering code identifies the device speed option within the XCKU13P family, while FFVE900 identifies its specific package configuration. Its BGA construction supports high I/O density and advanced interconnect routing, but the package also requires careful power delivery, thermal management, and BGA-layout expertise. Kintex UltraScale+ devices combine programmable logic resources with high-speed transceivers, memory interfaces, and DSP processing capabilities. This architecture is useful when a design must consolidate control logic, data acquisition, packet processing, and external communication into one FPGA. Compared with a smaller FPGA, the XCKU13P provides greater implementation capacity, while its advanced UltraScale+ architecture supports demanding bandwidth-oriented workloads. Typical applications include industrial control, test and measurement, high-speed data acquisition, network infrastructure, defense and aerospace systems, and accelerator prototyping. In these systems, the FPGA can implement parallel algorithms, interface to external memory, serialize high-rate data, and coordinate multiple peripherals while retaining programmable field updates. PCB implementation should prioritize uninterrupted power planes, low-impedance power distribution, solid thermal coupling, and signal-integrity control for high-speed package transitions. Designers should use AMD's package pinout files and the Vivado Design Suite to validate every pin assignment, bank voltage, differential pair, and power connection before fabrication. This product summary combines the exact device identity, package information, family context, and practical FPGA implementation considerations. It also distinguishes ordering variants that retain the same physical package while changing speed, temperature, or low-power characteristics, helping engineers evaluate upgrade and replacement options without confusing family similarity with guaranteed equivalence.

RFQ संपर्क
XCKU3P-1FFVA676E - Kintex UltraScale+ FPGA, 676-FCBGA | AMD Xilinx
XCKU3P-1FFVA676E

XCKU3P-1FFVA676E - Kintex UltraScale+ FPGA, 676-FCBGA | AMD Xilinx

The AMD Xilinx XCKU3P-1FFVA676E is a Kintex UltraScale+ field-programmable gate array (FPGA) supplied in a 676-ball FCBGA package, with 256 user I/O, 355,950 logic cells and a 667 MHz maximum clock rating as published for this device. The -1 suffix denotes the speed grade, and the A code in the part number identifies the 676-ball package option. A field-programmable gate array is a programmable logic device: an array of configurable logic blocks, block RAM, DSP arithmetic slices and high-speed I/O that is configured at power-up from a bitstream rather than being permanently masked in silicon. FPGAs sit at the top of the programmable-logic hierarchy, above fixed-function ASICs in flexibility and above microcontrollers in datapath throughput. Kintex UltraScale+ occupies the middle of AMD's portfolio, between the cost-optimized Artix-7/Zynq families and the highest-capacity Virtex UltraScale+ devices. The KU3P device combines roughly 355,950 logic cells with the UltraScale+ DSP48E2 arithmetic pipeline and 16.3 Mb of block RAM per slice group, delivering high performance per watt for mid-range designs. Key platform features include SelectIO resources with back-ported I/O, up to 16.3 Gb/s GTY transceivers, and the AXI4 interconnect fabric that links programmable logic to hard DSP blocks and memory. A dedicated security subsystem supports bitstream encryption and authentication for design-IP protection. Mechanically, the 676-FCBGA lands on a 31 x 31 mm substrate and is intended for multilayer boards with via-in-pad and micro-BGA fanout design rules. Because the package offers no user I/O beyond the specified 256 balls, the majority of the board budget is spent on power, clocking, and high-speed routing rather than on peripheral connectivity. Configuration data is loaded through the standard AMD configuration path, and the part is supported by the AMD Vivado design suite. Typical applications for the XCKU3P-1FFVA676E include industrial control and automation platforms, professional broadcast and video infrastructure, aerospace and defence instrumentation, telecom line-card and baseband processing, and test and measurement systems that need a large amount of parallel logic and DSP throughput in a single package. When planning the board, treat power delivery as the primary risk: UltraScale+ devices require multi-rail sequencing, and decoupling must follow the recommended high-frequency capacitor layout from the AMD package pinout and design documentation. Provide a solid ground plane, follow the recommended BGA fanout and via-in-pad geometry, and keep the high-speed transceiver reference design rules intact if the design uses GTY links. This page consolidates distributor availability, verified package and speed-grade data, pin-compatible family alternatives, and practical design guidance in one place so that engineers can qualify the KU3P device quickly, and compare it against the KU5P and -2 speed-grade options before committing to a layout.

RFQ संपर्क
XCKU3P-1FFVB676E - Kintex UltraScale+ FPGA | 355K LC | AMD
XCKU3P-1FFVB676E

XCKU3P-1FFVB676E - Kintex UltraScale+ FPGA | 355K LC | AMD

The AMD Xilinx XCKU3P-1FFVB676E is a Kintex UltraScale+ field-programmable gate array (FPGA) offering 355,950 logic cells, 31,641,600 bits of block RAM, and 1,560 DSP slices, housed in a 676-ball FCBGA package (FFVB676) at the -1 speed grade and the E (extended) temperature tier. It integrates 280 user I/O pins and 24 transceivers supporting up to 16.375 Gbps, making it the mid-density workhorse of the Kintex UltraScale+ family. Kintex UltraScale+ FPGAs occupy a specific tier in AMD's programmable-logic taxonomy: below Virtex UltraScale+ for highest performance and above Artix-7/Artix UltraScale+ for cost-optimized applications. Architecturally, the UltraScale+ generation introduces a register-rich silicon fabric, 3rd-generation SSI (stacked silicon interconnect) techniques, and tightly coupled DSP/BRAM columns, delivering up to 2x the performance-per-watt versus the prior generation for DSP-intensive workloads such as 5G baseband, machine-learning inference, and high-speed instrumentation. Key features of the XCKU3P include 16.375 Gbps GTH transceivers (24 channels), 6.6 Tbps serial bandwidth per device, integrated 100G Ethernet MACs, and a system-monitoring block that tracks on-die voltage and temperature. The device supports DDR4-2400 with on-chip ECC and offers hardware-rooted security via bitstream encryption and authentication using AES-256 and RSA-2048. The 676-ball FCBGA package has a body size of 27 mm × 27 mm with a 1.0 mm ball pitch, suitable for high-density PCB designs using standard BGA assembly. Typical applications span high-performance digital signal processing, 100G Ethernet network interface cards, 4K/8K video processing pipelines, test and measurement instrumentation, software-defined radio (SDR), and radar/EW front-end processing. The combination of high-speed transceivers and abundant DSP resources makes it a strong fit for low-latency, line-rate processing in both wired and wireless infrastructure. When designing with the XCKU3P-1FFVB676E, allocate at least eight PCB layers with continuous GND planes and matched-length pairs for transceivers; the package's 1.0 mm pitch requires HDI stack-ups (microvias). The extended (E) temperature grade supports -40 °C to +100 °C junction, and designers must respect the 2.0 W/cm² package thermal envelope with adequate airflow or heatsinking for sustained workloads. Vivado Design Suite is required for implementation.

RFQ संपर्क
XCKU3P-1FFVB676I - Kintex UltraScale+ FPGA | AMD
XCKU3P-1FFVB676I

XCKU3P-1FFVB676I - Kintex UltraScale+ FPGA | AMD

AMD XCKU3P-1FFVB676I is a Kintex UltraScale+ field-programmable gate array in a 676-pin FCBGA package. The device combines programmable logic, block RAM, DSP resources, high-speed serial connectivity, and general-purpose I/O in a single heterogeneous FPGA. Its XCKU3P designation identifies the high-performance Kintex UltraScale+ product family, while the -1 suffix identifies the -1 speed grade. The FFVB676 package designation identifies the 676-ball flip-chip BGA configuration used by this part. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. FPGA architecture belongs to the broader programmable-logic hierarchy and can be classified as a semiconductor, integrated circuit, and digital logic device. Instead of implementing every digital function with fixed application-specific circuitry, an FPGA combines configurable logic blocks and dedicated hard resources with an interconnect fabric. This enables parallel processing, rapid hardware revision, and high integration in systems that require deterministic real-time behavior. The XCKU3P family targets demanding communications, industrial, networking, signal-processing, and embedded-control systems. A Kintex UltraScale+ FPGA is useful when a design needs substantially more logic and serial throughput than lower-density programmable devices, while retaining a single-package implementation. The device combines a -1 performance grade with a large 676-pin package that provides extensive package I/O and power connectivity. Exact logic-cell, memory, DSP, I/O, and power specifications should be taken from the current AMD Kintex UltraScale+ data sheet for the selected package and speed grade. Use the part in designs that benefit from parallel datapaths, hardware-assisted filtering, protocol termination, high-speed data movement, or adaptive control. Common engineering roles include accelerator logic, video and image processing, industrial control, test instrumentation, communications infrastructure, and high-speed interface bridging. AMD UltraScale+ devices use programmable logic, block RAM, DSP slices, high-speed I/O, and integrated power-management resources, allowing one device to implement control, datapath, and interface functions in parallel rather than requiring several discrete components. The 676-ball FCBGA package is mechanically and electrically demanding. Board design must follow the AMD package pinout files and the device PCB-design guidance, including exact power and ground-plane connections, via arrays, decoupling placement, and ball-grid escape routing. Differential and high-speed interfaces require controlled impedance, careful return-path continuity, and compliance with the stated maximum transition-rate and board-routing constraints. Use the package-device pinout files from AMD when assigning every ball and when cross-checking the schematic, PCB library, and assembly drawings. Thermal design is also central to FPGA implementation because logic utilization, I/O activity, and switching can increase dynamic power. The power budget should be calculated from the actual clocking, memory, DSP, serial-link, and I/O assumptions in the design, including worst-case activity factors. A conservative approach is to use the AMD power estimator and system-design guidance with the exact device, package, speed grade, and utilization. This page identifies the verified commercial configuration and the engineering constraints that should be checked before schematic release. This product record combines the verified XCKU3P-1FFVB676I configuration, package information, related same-footprint variants, selection trade-offs, and practical implementation guidance. It is intended to help engineers identify the correct AMD/Xilinx Kintex UltraScale+ device and prepare a package-compliant, thermally valid, and production-ready FPGA design.

RFQ संपर्क