XC2C64A-7PCG44I - 64-Macrocell 7ns CPLD | Xilinx
MPN: XC2C64A-7PCG44I ✗ जीवन की समाप्तिXC2C64A-7PCG44I अवलोकन
A complex programmable logic device is a programmable semiconductor that combines a structured logic architecture with nonvolatile configuration storage. In the programmable-logic hierarchy, a CPLD sits between simple fixed-function logic and an FPGA: it offers macrocell-based logic implementation, predictable interconnect delays, and retained configuration in a compact package. The XC2C64A belongs to the CoolRunner-II family, designed for both high-performance and low-power portable equipment.
The device provides 64 macrocells and approximately 1,500 usable gates, with 33 user I/O pins available in the PCG44 package. The -7 suffix identifies the higher-performance speed grade. Its I/O architecture supports LVCMOS operation in 3.3 V, 2.5 V, and 1.8 V systems, while 1.5 V compatibility can be achieved by using Schmitt-trigger inputs. Intelligent power management helps reduce consumption when the device is inactive.
CoolRunner-II architecture uses configurable logic blocks and dedicated interconnect resources, making routing behavior more predictable than in a general-purpose FPGA. This characteristic is useful for control logic, bus arbitration, state machines, address decoding, and peripheral glue where a modest logic capacity is sufficient but deterministic implementation remains important. The PCG44 package also supports compact board layouts where a larger FPGA would be unnecessary.
Typical applications include industrial controller logic, low-power handheld equipment, communications interfaces, test and measurement systems, and embedded control subsystems. The 33 user I/O count makes the device suitable for parallel buses, status and control registers, clock distribution, and programmable signal conditioning when external fixed-function logic would otherwise consume more board area.
PCB design should follow the package dimensions, exposed-pad or thermal requirements, and recommended decoupling shown in the AMD datasheet. Confirm pin assignments, voltage domains, and supported I/O standards in the pin-description table before routing. Programming must use a compatible CoolRunner-II device programmer and the appropriate design file.
This page combines the XC2C64A-7PCG44I family architecture, package details, verified replacement relationships, and practical selection guidance. It also highlights the distinctions between speed grades and temperature suffixes so engineers can identify a pin-compatible replacement without overlooking device-level qualification requirements.
के लिए ड्रॉप-इन विकल्प XC2C64A-7PCG44I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC2C64A-7PCG44I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Process Technology, Configuration Memory, Package, Device Type, Logic Architecture.
XC2C64A-7VQG44I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC2C64A-7VQG44C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC2C64A-5VQG44C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC2C64A-7PCG44C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XC2C64A-5PCG44I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC2C64A-7PCG44I Maximum Ratings और Electrical Characteristics
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Logic Capacity | 64 macrocells |
| Usable Gates | 1,500 gates |
| User I/O Pins | 33 pins |
| Speed Grade | -7 |
| पैकेज | 44-pin VQFP |
| Process Technology | Advanced CMOS |
| Power Management | Intelligent power management |
| 3.3 V I/O Standard | LVCMOS |
| 2.5 V I/O Standard | LVCMOS |
| 1.8 V I/O Standard | LVCMOS |
| 1.5 V Input Compatibility | Schmitt-trigger inputs |
| Temperature Grade | Industrial grade |
| Configuration Memory | Nonvolatile configuration storage |
| Logic Architecture | Macrocell-based CoolRunner-II architecture |
| माउंटिंग प्रकार | Surface mount |
XC2C64A-7PCG44I 44-pin vqfp पिन कॉन्फ़िगरेशन गाइड
XC2C64A-7PCG44I (44-pin vqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC2C64A-7PCG44I.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC2C64A-7PCG44I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Controller Logic, Low-Power Portable Equipment, Communications Interface Conditioning, Test and Measurement Control, Embedded System Glue Logic, Audio and Video Interface Support.
Industrial Controller Logic
The XC2C64A-7PCG44I fits compact industrial control blocks that require deterministic programmable logic without the resource level of an FPGA. Its 64 macrocells and approximately 1,500 usable gates can implement state machines, interlocks, alarm logic, and supervisory sequencing, while the -7 speed grade supports tighter timing margins. The industrial-grade designation is relevant to equipment operating beyond consumer-temperature conditions. Intelligent power management also helps when only part of the logic is active, although final dissipation depends on clocking, I/O activity, voltage, and the implemented design.
अनुशंसित
Low-Power Portable Equipment
The XC2C64A-7PCG44I is appropriate for portable products that need a small, reconfigurable control engine with 64 macrocells and 33 user I/O pins. It can consolidate power sequencing, button handling, display control, status logic, and low-speed peripheral interfacing into one nonvolatile CPLD. Intelligent power-management features support reduced activity power, while the 44-pin VQFP limits board footprint. For battery-powered equipment, designers should still evaluate energy consumption across active and standby states, because I/O toggling and clock distribution can dominate the programmable-logic contribution.
अनुशंसित
Communications Interface Conditioning
The XC2C64A-7PCG44I can implement protocol framing, command decoding, bus arbitration, and interface isolation around communications peripherals. Its 33 user I/O pins provide enough parallel connectivity for control signals, while the -7 grade favors designs with demanding combinational or registered timing. LVCMOS support at 3.3 V, 2.5 V, and 1.8 V permits use with multiple generations of mixed-signal interface components. The design must still honor voltage compatibility, setup and hold requirements, termination, and configuration constraints for every connected bus.
अनुशंसित
Test and Measurement Control
In test and measurement equipment, the XC2C64A-7PCG44I can implement sequencing, trigger conditioning, front-panel control, and glue logic between sensors and a processor. The 64-macrocell limit makes it appropriate for modular instrument control rather than high-channel-count signal processing. The -7 speed class provides additional timing margin for clocked state machines and parallel capture logic. Engineers should use the timing tables to establish setup, hold, clock, and output-delay margins, and should review I/O drive and termination for every instrument signal path.
अनुशंसित
Embedded System Glue Logic
The XC2C64A-7PCG44I is useful when a microcontroller or processor requires deterministic companion logic for address decoding, arbitration, interrupt routing, or peripheral sequencing. Sixty-four macrocells and 33 user I/O pins provide a practical capacity limit for those functions while preserving a compact 44-pin VQFP footprint. Nonvolatile configuration permits the logic pattern to remain available after power loss, and the -7 grade can improve timing margin over a -5 device. Final selection should account for worst-case propagation delays and system clock requirements from the manufacturer timing tables.
अनुशंसित
Audio and Video Interface Support
The XC2C64A-7PCG44I can support audio or video systems with control-path logic, channel routing, synchronization, and status monitoring. Its macrocell capacity is better suited to control and interface adaptation than complete media processing, while the 33 available user I/O pins can support several parallel data or control lines. The -7 grade benefits clocked routing and registered interfaces. Signal integrity remains application-dependent: impedance, trace length, grounding, and output timing must be evaluated for each bus, particularly when the device interfaces with converters or higher-speed digital components.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC2C64A-7PCG44I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC2C64A-7VQG44I | XC2C64A-7VQG44C | XC2C64A-5VQG44C | XC2C64A-7PCG44C | XC2C64A-5PCG44I |
|---|---|---|---|---|---|---|
| Device Type | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD | CoolRunner-II CPLD |
| Logic Capacity | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| Speed Grade | -7 | -7 | -7 | -5 | -7 | -5 |
| Package | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 | VQFP-44 |
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Temperature Suffix | I (industrial) | I (industrial) | C (commercial) | C (commercial) | C (commercial) | I (industrial) |
मुख्य विशेषताएँ
- Preserves the target's high-performance speed class (बनामXC2C64A-5VQG44C)
- Maintains industrial temperature positioning (बनामXC2C64A-7VQG44C)
- Matches the target PCG44 package code (बनामXC2C64A-7VQG44I)
डिज़ाइन नोट्स
Route the XC2C64A-7PCG44I against the exact PCG44 package drawing and pin table in DS311 rather than against a generic 44-pin VQFP footprint. Verify body dimensions, lead pitch, pin-1 orientation, power pins, configuration pins, and any exposed thermal features. Place required bypass capacitors close to their associated supply pins and keep the configuration interface away from noisy switching nodes. Every candidate replacement must pass this same mechanical and pin-function comparison.
Do not treat PCG44, VQG44, I, and C as interchangeable without decoding and checking each ordering suffix. The target is a 44-pin VQFP device with an industrial suffix, while candidate replacements can differ in package code or temperature grade. A -5 replacement is also approximately 28.6% slower by grade designation than -7. Compare the manufacturer's timing, environmental, and package tables and perform board-level validation before approving any alternate device.
Use the DS311 operating-current and power-management characteristics to build the power budget for active and inactive states. Account for core current, I/O drive current, and the dynamic effect of switching signals; the logic-cell count alone does not determine consumption. Keep I/O levels compatible with the selected LVCMOS voltage and use Schmitt-trigger inputs where required for the 1.5 V application mentioned in the device documentation.
Use the maximum timing data, not nominal values, when constraining clock, setup, hold, and output-delay requirements. Add series damping or source-synchronous routing techniques when a connected interface requires controlled edge rates, and maintain a continuous ground reference beneath high-speed routes. The CPLD's predictable interconnect is beneficial, but package effects, load capacitance, and board return paths still determine signal integrity at the pin.
अनुपालन जानकारी
The cited component pages and datasheet snippets do not provide definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed for the exact ordering code and assembly.