माइक्रोकंट्रोलर्स

उत्पाद (20,000+)

C8051F019R - 25MHz 16KB Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F019R

C8051F019R - 25MHz 16KB Mixed-Signal MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F019R is an 8-bit mixed-signal microcontroller with a 25 MHz clock, 16 KB of ISP flash memory, and a 48-pin TQFP package measuring 7 x 7 mm. It combines a CIP-51-compatible microcontroller core with a 10-bit ADC and mixed-signal peripherals, making it suitable for embedded control systems that require analog measurement alongside digital processing. A mixed-signal microcontroller is an integrated circuit that combines a digital microcontroller core with analog functions such as ADCs, DACs, comparators, and voltage references. In the broader semiconductor hierarchy, the C8051F019R belongs to the microcontroller and embedded-processor class, where an 8051-compatible core executes firmware while dedicated peripherals acquire, generate, compare, and control analog signals. The verified device data identifies a 25 MHz operating speed, 16 KB of flash memory, 1.25 KB of RAM, a 10-bit ADC, and a 48-pin TQFP package. The C8051F018/9 family also provides two 12-bit DACs, two voltage comparators, an internal voltage reference, and hardware implementations of I2C or SMBus, UART, and SPI. These resources allow one controller to manage sensing, output generation, communications, and general-purpose control. The architecture combines an 8051-compatible core with high-speed 12-bit analog peripherals. The listed maximum execution rate is 25 MIPS, while the ADC provides 10-bit resolution for common industrial and instrumentation measurements. Integrated serial interfaces reduce the need for external peripheral chips, and in-system programming supports firmware programming and updates through the device programming interface. Typical uses include industrial sensor acquisition, process-control modules, data-acquisition equipment, embedded instrumentation, and compact control panels. The device is particularly appropriate when a design needs several analog channels, dual DAC outputs, programmable comparators, and conventional serial communications without requiring a higher-complexity control platform. The principal design consideration is power-supply and signal integrity. The verified supply range is 2.8 V to 3.6 V, so the regulator, decoupling network, and digital and analog ground arrangement must preserve a stable 3.3 V operating environment. Analog inputs should be protected against transients and configured for the impedance and source range of the selected sensors. This page consolidates verified manufacturer-related and distributor information, maps the C8051F019R's mixed-signal capabilities, identifies the unresolved need for a complete public pin list, and explains where drop-in alternatives can and cannot be substantiated without adding unverified technical claims.

RFQ संपर्क
C8051F020 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs
C8051F020

C8051F020 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F020 is a mixed-signal 8-bit system-on-a-chip microcontroller featuring a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and mixed-signal peripherals in a 100-pin TQFP package measuring 14 x 14 mm. Its principal specifications include an 8-channel, 12-bit ADC capable of 100 ksps, a 12-bit dual-channel DAC, two comparators, and five 16-bit timers, making it suitable for embedded measurement, industrial control, and analog-monitoring systems. A microcontroller is a semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The C8051F020 belongs to the hierarchy of MCU, mixed-signal microcontroller, 8-bit MCU, and embedded system-on-a-chip. Its analog and digital integration lets a compact embedded design acquire, process, and act on measured signals without requiring several separate external devices. The device provides 64 digital I/O pins, according to the manufacturer data, and combines serial communications with timer and analog resources. The 12-bit ADC includes an eight-channel multiplexer and programmable-gain stage, while the two-channel DAC provides a 12-bit output interface. Five 16-bit timers support accurate event timing, periodic events, and system timing. These resources are significant for designs requiring more than simple digital control. The C8051F020/1/2/3 family combines an 8051-compatible processing core with programmable analog peripherals and dedicated digital interfaces. At the family level, the on-board SAR ADC is described as having an eight-channel input multiplexer, programmable gain amplifier, and maximum throughput of 500 ksps. The individual C8051F020 product page specifies a 100 ksps, eight-channel, 12-bit ADC, so designers should use the device-specific value for this exact selection. Typical applications include industrial process monitoring, sensor acquisition, motor and actuator control, laboratory instrumentation, embedded data logging, and analog control systems. The device is particularly appropriate when an application needs synchronized sampling, precision timing, programmable analog gain, and a compact mixed-signal controller on the same board. When designing around the C8051F020, verify the exact package suffix, supply-voltage limits, clock configuration, analog input range, and exposed-pin assignments against the manufacturer datasheet. The base MPN C8051F020 is associated with a 100-pin TQFP in distributor listings, while ordering suffixes such as -GQ and -GQR identify specific package or shipping variants and must not be treated as interchangeable without checking ordering information. This page combines verified manufacturer specifications, distributor availability and pricing references, strict same-package replacement analysis, and practical design guidance. It is intended to provide engineering context beyond a raw parameter list, helping developers assess the C8051F020 against same-footprint family variants and redesign-level alternatives.

RFQ संपर्क
C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs
C8051F020-GQ

C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs

The Silicon Labs C8051F020-GQ is an 8-bit mixed-signal microcontroller with a 25 MHz maximum clock, 64 KB of flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. Its integrated system-on-chip design combines a 8051-compatible core, digital I/O, analog conversion, timers, serial communication, memory, and monitoring functions. A microcontroller is a programmable semiconductor device that integrates a CPU, memory, and peripherals into one device. The C8051F02x family belongs to the 8051 microcontroller hierarchy and is designed for embedded control and data-acquisition systems. The C8051F020-GQ can provide 64 digital I/O pins or 32 digital I/O pins according to its configuration, while its mixed-signal peripherals allow analog measurement and control functions to share one device. Key verified features include a 25 MHz operating frequency, 64 KB flash, and an on-chip ADC identified by distributor listings. Retrieved family data also reports two 16-bit SAR ADCs, 16-bit resolution, programmable throughput up to 1 Msps, and operation as two single-ended or one differential converter. An on-chip VDD monitor, watchdog timer, and clock oscillator reduce the amount of external support circuitry required. The device belongs to the C8051F02x mixed-signal MCU family and is positioned for industrial embedded-control, instrumentation, and data-acquisition designs. Its flash memory supports firmware storage, while the high-pin-count TQFP package exposes substantial digital and analog connectivity. The package is appropriate for conventional multilayer PCB assembly rather than a compact BGA or QFN redesign. Typical use cases include sensor acquisition, process monitoring, digital control, communications, and compact embedded instruments. The verified family description highlights two SAR ADC channels and DMA support, allowing sampled data to be transferred into RAM without requiring each byte to be handled directly by software. A critical design requirement is to verify the complete 100-pin assignment, exposed analog functions, supply limits, oscillator options, and peripheral multiplexing against the manufacturer datasheet before layout. The 100-pin package needs adequate routing space, and analog signal paths require careful grounding and decoupling to preserve measurement quality. This page consolidates verified distributor listings, manufacturer product information, package details, and practical replacement guidance. It distinguishes confirmed data from fields that still require schematic- and datasheet-level confirmation, helping engineers evaluate procurement and migration without confusing a similar MCU with a true drop-in replacement.

RFQ संपर्क
C8051F020R - 25MHz 8051 Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F020R

C8051F020R - 25MHz 8051 Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F020R is a mixed-signal 8-bit system-on-a-chip microcontroller featuring a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and mixed-signal peripherals in a 100-pin TQFP package measuring 14 x 14 mm. Its principal specifications include an 8-channel, 12-bit ADC capable of 100 ksps, a 12-bit dual-channel DAC, two comparators, and five 16-bit timers, making it suitable for embedded measurement, industrial control, and analog-monitoring systems. A microcontroller is a semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The C8051F020R belongs to the hierarchy of MCU, mixed-signal microcontroller, 8-bit MCU, and embedded system-on-a-chip. Its analog and digital integration lets a compact embedded design acquire, process, and act on measured signals without requiring several separate external devices. The device provides 64 digital I/O pins, according to the manufacturer data, and combines serial communications with timer and analog resources. The 12-bit ADC includes an eight-channel multiplexer and programmable-gain stage, while the two-channel DAC provides a 12-bit output interface. Five 16-bit timers support accurate event timing, periodic events, and system timing. These resources are significant for designs requiring more than simple digital control. The C8051F020R/1/2/3 family combines an 8051-compatible processing core with programmable analog peripherals and dedicated digital interfaces. At the family level, the on-board SAR ADC is described as having an eight-channel input multiplexer, programmable gain amplifier, and maximum throughput of 500 ksps. The individual C8051F020R product page specifies a 100 ksps, eight-channel, 12-bit ADC, so designers should use the device-specific value for this exact selection. Typical applications include industrial process monitoring, sensor acquisition, motor and actuator control, laboratory instrumentation, embedded data logging, and analog control systems. The device is particularly appropriate when an application needs synchronized sampling, precision timing, programmable analog gain, and a compact mixed-signal controller on the same board. When designing around the C8051F020R, verify the exact package suffix, supply-voltage limits, clock configuration, analog input range, and exposed-pin assignments against the manufacturer datasheet. The base MPN C8051F020R is associated with a 100-pin TQFP in distributor listings, while ordering suffixes such as -GQ and -GQR identify specific package or shipping variants and must not be treated as interchangeable without checking ordering information. This page combines verified manufacturer specifications, distributor availability and pricing references, strict same-package replacement analysis, and practical design guidance. It is intended to provide engineering context beyond a raw parameter list, helping developers assess the C8051F020R against same-footprint family variants and redesign-level alternatives.

RFQ संपर्क
C8051F021 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F021

C8051F021 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

Silicon Labs C8051F021 is a highly integrated mixed-signal 8-bit microcontroller with a powerful 25 MHz 8051-compatible core, 64 kB of Flash memory, 4.25 kB of RAM, and a 10 mm × 10 mm 64-pin QFP package. The device combines 32 digital I/O pins with a 12-bit, 8-channel, 100 ksps ADC and a 12-bit, 2-channel DAC, making it suitable for embedded control, data acquisition, and analog signal conditioning. A microcontroller integrates a processor core, memory, digital peripherals, and analog conversion functions on one semiconductor device. The C8051F021 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for controlling motors, reading sensors, driving displays, and executing real-time embedded algorithms. Its mixed-signal resources reduce the need for separate ADC and DAC components when the required conversion rates and resolution are sufficient. The principal verified specifications include 25 MHz performance, 64 kB of Flash, 4.25 kB of RAM, 32 digital I/O pins, a 12-bit 8-channel ADC capable of 100 ksps, a 12-bit 2-channel DAC, two comparators, and five 16-bit timers. The manufacturer describes the device as an analog-intensive MCU with additional communication interfaces. Exact interface assignments, electrical limits, clock details, and programming requirements should be confirmed in the manufacturer datasheet before layout or firmware design. C8051F021 uses the Silicon Labs C8051F02x family architecture and is identified as a mixed-signal system-on-a-chip MCU. Its combination of Flash memory, RAM, ADC, DAC, comparators, timers, and serial communications supports compact control boards where analog measurements and control outputs share the same MCU. The QFP64 package also provides a mechanically accessible footprint for conventional through-hole assembly or leaded PCB layouts. Typical applications include industrial sensor acquisition, laboratory instrumentation, motor and actuator control, process monitoring, embedded measurement systems, and communication-enabled control nodes. The ADC can sample multiple analog inputs at up to 100 ksps, while the DAC supports two analog outputs. Firmware should configure the converter channels, establish reference and acquisition timing, and calibrate results according to the electrical characteristics in the official documentation. For PCB design, place the MCU close to its bypass capacitors and keep analog signal routing away from high-current switching nodes. Use a stable clock and decoupling arrangement, confirm all package-specific pin functions, and provide adequate power and ground connectivity. Because the verified search results do not include complete electrical, timing, pin-function, or environmental tables, those values remain marked as data needed rather than inferred.

RFQ संपर्क
C8051F021R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)
C8051F021R

C8051F021R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F021R is a highly integrated mixed-signal 8-bit microcontroller with a powerful 25 MHz 8051-compatible core, 64 kB of Flash memory, 4.25 kB of RAM, and a 10 mm × 10 mm 64-pin QFP package. The device combines 32 digital I/O pins with a 12-bit, 8-channel, 100 ksps ADC and a 12-bit, 2-channel DAC, making it suitable for embedded control, data acquisition, and analog signal conditioning. A microcontroller integrates a processor core, memory, digital peripherals, and analog conversion functions on one semiconductor device. The C8051F021R belongs to the 8-bit microcontroller hierarchy and provides a compact platform for controlling motors, reading sensors, driving displays, and executing real-time embedded algorithms. Its mixed-signal resources reduce the need for separate ADC and DAC components when the required conversion rates and resolution are sufficient. The principal verified specifications include 25 MHz performance, 64 kB of Flash, 4.25 kB of RAM, 32 digital I/O pins, a 12-bit 8-channel ADC capable of 100 ksps, a 12-bit 2-channel DAC, two comparators, and five 16-bit timers. The manufacturer describes the device as an analog-intensive MCU with additional communication interfaces. Exact interface assignments, electrical limits, clock details, and programming requirements should be confirmed in the manufacturer datasheet before layout or firmware design. C8051F021R uses the Silicon Labs C8051F02x family architecture and is identified as a mixed-signal system-on-a-chip MCU. Its combination of Flash memory, RAM, ADC, DAC, comparators, timers, and serial communications supports compact control boards where analog measurements and control outputs share the same MCU. The QFP64 package also provides a mechanically accessible footprint for conventional through-hole assembly or leaded PCB layouts. Typical applications include industrial sensor acquisition, laboratory instrumentation, motor and actuator control, process monitoring, embedded measurement systems, and communication-enabled control nodes. The ADC can sample multiple analog inputs at up to 100 ksps, while the DAC supports two analog outputs. Firmware should configure the converter channels, establish reference and acquisition timing, and calibrate results according to the electrical characteristics in the official documentation. For PCB design, place the MCU close to its bypass capacitors and keep analog signal routing away from high-current switching nodes. Use a stable clock and decoupling arrangement, confirm all package-specific pin functions, and provide adequate power and ground connectivity. Because the verified search results do not include complete electrical, timing, pin-function, or environmental tables, those values remain marked as data needed rather than inferred.

RFQ संपर्क
C8051F022 - 25MHz Mixed-Signal MCU | Silicon Labs
C8051F022

C8051F022 - 25MHz Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F022 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and a 100-pin QFP package. Its integrated analog peripherals include a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, and two comparators. The device also provides 64 digital I/O pins, communication interfaces, and five 16-bit timers for embedded control, data acquisition, and signal-conditioning applications. A microcontroller such as the C8051F022 integrates a processor core, memory, digital I/O, timers, and analog conversion functions on one mixed-signal system-on-chip. The 8051 architecture belongs to the broader 8-bit microcontroller hierarchy and is suited to compact control systems that require deterministic peripheral integration without a separate external ADC or DAC. Its mixed-signal feature set is particularly useful when analog measurements, control outputs, and digital communications must share one device. The C8051F022 combines 25 MHz processing performance with 64 kB Flash and 4.25 kB RAM. The 10-bit ADC supports eight channels at up to 100 ksps, while the 12-bit DAC provides two channels for analog output generation. Two comparators support thresholding and basic signal decisions, and five 16-bit timers help implement timing, waveform generation, and periodic control functions. The manufacturer product page identifies the device as analog-intensive and provides the key feature selection for the C8051F02x family. The device is designed around the CIP-51 8051-compatible core, with integrated mixed-signal peripherals intended to reduce external component count. A 100-pin QFP package provides access to the device's digital and analog resources, but the high pin count also requires careful PCB routing and decoupling. Verified distributor data identifies the commercial orderable variant as C8051F022-GQ in a 100-TQFP package measuring 14 x 14 mm. Typical uses include industrial measurement and control, data-acquisition systems, analog signal generation, communications equipment, and embedded products requiring simultaneous MCU and analog-peripheral operation. The ADC can sample multiple external inputs, the DAC can produce programmable analog outputs, and the comparators can monitor thresholds without requiring separate comparator ICs. Firmware selection should account for the peripheral mix and the required I/O count rather than treating the MCU only as a general-purpose controller. For PCB implementation, place bypass capacitors close to the power pins and route sensitive analog signals away from high-current switching paths. The manufacturer documentation should be used to confirm the complete package pinout, electrical limits, programming method, and peripheral multiplexing before layout release. This page combines verified manufacturer and distributor facts with application-oriented design guidance and explicitly flags information not present in the supplied data.

RFQ संपर्क
C8051F022R - 25MHz Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F022R

C8051F022R - 25MHz Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F022R is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and a 100-pin QFP package. Its integrated analog peripherals include a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, and two comparators. The device also provides 64 digital I/O pins, communication interfaces, and five 16-bit timers for embedded control, data acquisition, and signal-conditioning applications. A microcontroller such as the C8051F022R integrates a processor core, memory, digital I/O, timers, and analog conversion functions on one mixed-signal system-on-chip. The 8051 architecture belongs to the broader 8-bit microcontroller hierarchy and is suited to compact control systems that require deterministic peripheral integration without a separate external ADC or DAC. Its mixed-signal feature set is particularly useful when analog measurements, control outputs, and digital communications must share one device. The C8051F022R combines 25 MHz processing performance with 64 kB Flash and 4.25 kB RAM. The 10-bit ADC supports eight channels at up to 100 ksps, while the 12-bit DAC provides two channels for analog output generation. Two comparators support thresholding and basic signal decisions, and five 16-bit timers help implement timing, waveform generation, and periodic control functions. The manufacturer product page identifies the device as analog-intensive and provides the key feature selection for the C8051F02x family. The device is designed around the CIP-51 8051-compatible core, with integrated mixed-signal peripherals intended to reduce external component count. A 100-pin QFP package provides access to the device's digital and analog resources, but the high pin count also requires careful PCB routing and decoupling. Verified distributor data identifies the commercial orderable variant as C8051F022R-GQ in a 100-TQFP package measuring 14 x 14 mm. Typical uses include industrial measurement and control, data-acquisition systems, analog signal generation, communications equipment, and embedded products requiring simultaneous MCU and analog-peripheral operation. The ADC can sample multiple external inputs, the DAC can produce programmable analog outputs, and the comparators can monitor thresholds without requiring separate comparator ICs. Firmware selection should account for the peripheral mix and the required I/O count rather than treating the MCU only as a general-purpose controller. For PCB implementation, place bypass capacitors close to the power pins and route sensitive analog signals away from high-current switching paths. The manufacturer documentation should be used to confirm the complete package pinout, electrical limits, programming method, and peripheral multiplexing before layout release. This page combines verified manufacturer and distributor facts with application-oriented design guidance and explicitly flags information not present in the supplied data.

RFQ संपर्क
C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs
C8051F023

C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs

Silicon Labs C8051F023 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash, 4.25 kB of RAM, and a 64-pin QFP package. It integrates a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, two comparators, five 16-bit timers, and additional communication interfaces for compact embedded control systems. A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one semiconductor die. The C8051F023 sits in the hierarchy MCU → mixed-signal microcontroller → 8-bit microcontroller → embedded semiconductor, providing sensor acquisition, control output, communications, and timing in one device. Its integrated analog peripherals reduce the need for separate ADC, DAC, and comparator components when board space or cost is important. Key features include the 25 MHz processor performance, 64 kB program Flash, 4.25 kB RAM, 8-channel 10-bit ADC sampling at 100 ksps, 2-channel 12-bit DAC, and two comparators. Five 16-bit timers support precise timing, periodic control, and communication tasks. The verified distributor listing identifies the device in a 64-TQFP package measuring 10 mm by 10 mm. The device architecture combines the established 8051 instruction set with analog-intensive peripherals in a mixed-signal system-on-chip design. The ADC and DAC provide conversion functions directly in the control loop, while comparators can support threshold detection and signal monitoring. The package provides 64 digital I/O pins according to the verified C8051F02x datasheet snippet, although exact pin assignments and package details should be confirmed against the manufacturer documentation. Typical uses include industrial measurement and control, data acquisition, sensor-interface systems, analog signal conditioning, and compact embedded instruments. The 100 ksps ADC is suitable for many low-to-moderate-bandwidth acquisition tasks, while the DAC supports programmable analog output in test equipment and control systems. A key design consideration is analog signal integrity. Place ADC inputs, DAC outputs, reference connections, and power pins according to the manufacturer layout guidance, keeping high-current switching paths away from sensitive analog traces and providing appropriate decoupling. The verified web data does not provide complete pinout, operating-temperature, supply-voltage, lifecycle, or compliance values, so those details require confirmation before production release.

RFQ संपर्क
C8051F023R - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs (Tape & Reel)
C8051F023R

C8051F023R - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F023R is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash, 4.25 kB of RAM, and a 64-pin QFP package. It integrates a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, two comparators, five 16-bit timers, and additional communication interfaces for compact embedded control systems. A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one semiconductor die. The C8051F023R sits in the hierarchy MCU → mixed-signal microcontroller → 8-bit microcontroller → embedded semiconductor, providing sensor acquisition, control output, communications, and timing in one device. Its integrated analog peripherals reduce the need for separate ADC, DAC, and comparator components when board space or cost is important. Key features include the 25 MHz processor performance, 64 kB program Flash, 4.25 kB RAM, 8-channel 10-bit ADC sampling at 100 ksps, 2-channel 12-bit DAC, and two comparators. Five 16-bit timers support precise timing, periodic control, and communication tasks. The verified distributor listing identifies the device in a 64-TQFP package measuring 10 mm by 10 mm. The device architecture combines the established 8051 instruction set with analog-intensive peripherals in a mixed-signal system-on-chip design. The ADC and DAC provide conversion functions directly in the control loop, while comparators can support threshold detection and signal monitoring. The package provides 64 digital I/O pins according to the verified C8051F02x datasheet snippet, although exact pin assignments and package details should be confirmed against the manufacturer documentation. Typical uses include industrial measurement and control, data acquisition, sensor-interface systems, analog signal conditioning, and compact embedded instruments. The 100 ksps ADC is suitable for many low-to-moderate-bandwidth acquisition tasks, while the DAC supports programmable analog output in test equipment and control systems. A key design consideration is analog signal integrity. Place ADC inputs, DAC outputs, reference connections, and power pins according to the manufacturer layout guidance, keeping high-current switching paths away from sensitive analog traces and providing appropriate decoupling. The verified web data does not provide complete pinout, operating-temperature, supply-voltage, lifecycle, or compliance values, so those details require confirmation before production release.

RFQ संपर्क
C8051F040 - 25MHz Mixed-Signal MCU | Silicon Labs | CAN
C8051F040

C8051F040 - 25MHz Mixed-Signal MCU | Silicon Labs | CAN

The Silicon Laboratories C8051F040 is an 8-bit mixed-signal microcontroller operating at 25 MHz, with 64 KB of programmable Flash, 64 digital I/O pins, and an integrated CAN 2.0B controller in a 100-pin TQFP package. It combines a 25 MIPS 8051 core, a 13-channel 12-bit ADC sampling at 100 ksps, three comparators, two 12-bit DAC channels, and an on-chip temperature sensor in one mixed-signal device. A mixed-signal microcontroller is a programmable controller that processes digital logic while also acquiring, generating, or comparing analog signals. The C8051F04x family belongs to the hierarchy of 8-bit MCU, microcontroller, embedded processor, and semiconductor. This integration reduces the need for separate analog and communication peripherals while retaining the deterministic control architecture associated with 8051 devices. Key features include 25 MIPS execution performance, 64 KB of In-System Programmable Flash, 256 bytes of RAM, 4 KB of external RAM, and 64 digital I/O pins. The C8051F040 also provides five timers, a Programmable Counter Array, SPI, SMBus, I2C, two UARTs, CAN 2.0B, a 13-channel 12-bit ADC, two 12-bit DACs, and three comparators. These resources support control loops, communications, analog measurement, and signal generation within a single package. The 25 MHz core provides up to 25 MIPS of throughput, while the 12-bit ADC supports measurements at up to 100 ksps. The integrated CAN controller adds network-capable communications without requiring a separate protocol controller. The combination of 64 I/O pins and extensive mixed-signal peripherals makes the device suitable for industrial control, data acquisition, communications, and embedded measurement systems where board space is constrained. Typical uses include CAN-connected industrial controllers, multi-channel sensor acquisition equipment, programmable signal generation, process monitoring, and communications-oriented embedded systems. The 100-lead TQFP package provides access to the extensive digital and analog resources, although its relatively large footprint demands careful PCB planning and adequate analog layout discipline. Designers should evaluate the MCU's analog acquisition behavior, external component requirements, clock architecture, and thermal conditions against the complete manufacturer datasheet before release. Firmware development also requires an approved 8051-compatible toolchain and programming method. The manufacturer datasheet remains the controlling source for pin-level functions, electrical limits, timing, and errata. This product page consolidates verified manufacturer and distributor information, package details, mixed-signal feature data, application guidance, and replacement considerations. It is intended to accelerate component evaluation while clearly separating published device facts from parameters that still require confirmation from the latest datasheet.

RFQ संपर्क
C8051F040R - 25MHz Mixed-Signal MCU | Silicon Labs | CAN (Tape & Reel)
C8051F040R

C8051F040R - 25MHz Mixed-Signal MCU | Silicon Labs | CAN (Tape & Reel)

The Silicon Laboratories C8051F040R is an 8-bit mixed-signal microcontroller operating at 25 MHz, with 64 KB of programmable Flash, 64 digital I/O pins, and an integrated CAN 2.0B controller in a 100-pin TQFP package. It combines a 25 MIPS 8051 core, a 13-channel 12-bit ADC sampling at 100 ksps, three comparators, two 12-bit DAC channels, and an on-chip temperature sensor in one mixed-signal device. A mixed-signal microcontroller is a programmable controller that processes digital logic while also acquiring, generating, or comparing analog signals. The C8051F04x family belongs to the hierarchy of 8-bit MCU, microcontroller, embedded processor, and semiconductor. This integration reduces the need for separate analog and communication peripherals while retaining the deterministic control architecture associated with 8051 devices. Key features include 25 MIPS execution performance, 64 KB of In-System Programmable Flash, 256 bytes of RAM, 4 KB of external RAM, and 64 digital I/O pins. The C8051F040R also provides five timers, a Programmable Counter Array, SPI, SMBus, I2C, two UARTs, CAN 2.0B, a 13-channel 12-bit ADC, two 12-bit DACs, and three comparators. These resources support control loops, communications, analog measurement, and signal generation within a single package. The 25 MHz core provides up to 25 MIPS of throughput, while the 12-bit ADC supports measurements at up to 100 ksps. The integrated CAN controller adds network-capable communications without requiring a separate protocol controller. The combination of 64 I/O pins and extensive mixed-signal peripherals makes the device suitable for industrial control, data acquisition, communications, and embedded measurement systems where board space is constrained. Typical uses include CAN-connected industrial controllers, multi-channel sensor acquisition equipment, programmable signal generation, process monitoring, and communications-oriented embedded systems. The 100-lead TQFP package provides access to the extensive digital and analog resources, although its relatively large footprint demands careful PCB planning and adequate analog layout discipline. Designers should evaluate the MCU's analog acquisition behavior, external component requirements, clock architecture, and thermal conditions against the complete manufacturer datasheet before release. Firmware development also requires an approved 8051-compatible toolchain and programming method. The manufacturer datasheet remains the controlling source for pin-level functions, electrical limits, timing, and errata. This product page consolidates verified manufacturer and distributor information, package details, mixed-signal feature data, application guidance, and replacement considerations. It is intended to accelerate component evaluation while clearly separating published device facts from parameters that still require confirmation from the latest datasheet.

RFQ संपर्क
C8051F041 - 25MHz Mixed-Signal 8051 MCU with 64KB Flash
C8051F041

C8051F041 - 25MHz Mixed-Signal 8051 MCU with 64KB Flash

Silicon Labs C8051F041 is an integrated mixed-signal 8-bit microcontroller with a 25MHz CIP-51-compatible 8051 core, 64KB of flash memory, a 12-bit 100ksps ADC, three comparators, and CAN 2.0B support in a 64-pin TQFP package. The device combines a 25 MIPS processing capability, 4.25KB of on-chip RAM, programmable analog conversion, and industrial communication features in one surface-mount device. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, and peripherals on one die. The C8051F041 belongs to the 8051 family, which combines a mature instruction set with mixed-signal peripherals for embedded control. Its position in the hierarchy is microcontroller → 8-bit MCU → mixed-signal MCU → embedded control platform. Key features include a 25MHz operating frequency and advertised performance of 25 MIPS, 64KB of in-system programmable flash, and 4.25KB of on-chip RAM. Its analog subsystem includes a 12-bit successive-approximation ADC with 13 input channels, programmable throughput up to 100ksps, and three comparators. CAN 2.0B support allows the MCU to participate in embedded CAN networks. The C8051F041 uses the Silicon Labs C8051F04x architecture, combining an enhanced 8051-compatible core with separate high-speed analog subsystems. The verified distributor description identifies both 10-bit and 12-bit conversion options across the family and notes a 100ksps ADC operating mode. This makes the device useful where digital control, local analog measurement, and deterministic communication must coexist in a compact embedded design. Typical applications include industrial sensor-control equipment, building automation nodes, CAN-connected instrumentation, motor or process-control modules, and compact consumer appliances. The 12-bit ADC is appropriate for monitoring external analog transducers, while the comparators can support threshold detection, fault signaling, or simple control functions without occupying a separate analog IC. The primary design consideration is power-domain integration. The verified source identifies a 2.7V to 3.6V supply range, so the MCU and its analog peripherals must be operated from a compatible 3.3V rail. Board design must also preserve clean analog return paths, provide suitable bypassing, and isolate communications and switching nodes from sensitive ADC inputs. This page consolidates verified distributor specifications, package information, pricing context, cross-reference findings, and practical design guidance. It also distinguishes documented drop-in replacements from unverified alternatives, helping engineers avoid assuming that a similar MCU is pin-compatible without checking its complete electrical and pin definitions.

RFQ संपर्क
C8051F041R - 25MHz Mixed-Signal 8051 MCU with 64KB Flash (Tape & Reel)
C8051F041R

C8051F041R - 25MHz Mixed-Signal 8051 MCU with 64KB Flash (Tape & Reel)

Silicon Labs C8051F041R is an integrated mixed-signal 8-bit microcontroller with a 25MHz CIP-51-compatible 8051 core, 64KB of flash memory, a 12-bit 100ksps ADC, three comparators, and CAN 2.0B support in a 64-pin TQFP package. The device combines a 25 MIPS processing capability, 4.25KB of on-chip RAM, programmable analog conversion, and industrial communication features in one surface-mount device. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, and peripherals on one die. The C8051F041R belongs to the 8051 family, which combines a mature instruction set with mixed-signal peripherals for embedded control. Its position in the hierarchy is microcontroller → 8-bit MCU → mixed-signal MCU → embedded control platform. Key features include a 25MHz operating frequency and advertised performance of 25 MIPS, 64KB of in-system programmable flash, and 4.25KB of on-chip RAM. Its analog subsystem includes a 12-bit successive-approximation ADC with 13 input channels, programmable throughput up to 100ksps, and three comparators. CAN 2.0B support allows the MCU to participate in embedded CAN networks. The C8051F041R uses the Silicon Labs C8051F04x architecture, combining an enhanced 8051-compatible core with separate high-speed analog subsystems. The verified distributor description identifies both 10-bit and 12-bit conversion options across the family and notes a 100ksps ADC operating mode. This makes the device useful where digital control, local analog measurement, and deterministic communication must coexist in a compact embedded design. Typical applications include industrial sensor-control equipment, building automation nodes, CAN-connected instrumentation, motor or process-control modules, and compact consumer appliances. The 12-bit ADC is appropriate for monitoring external analog transducers, while the comparators can support threshold detection, fault signaling, or simple control functions without occupying a separate analog IC. The primary design consideration is power-domain integration. The verified source identifies a 2.7V to 3.6V supply range, so the MCU and its analog peripherals must be operated from a compatible 3.3V rail. Board design must also preserve clean analog return paths, provide suitable bypassing, and isolate communications and switching nodes from sensitive ADC inputs. This page consolidates verified distributor specifications, package information, pricing context, cross-reference findings, and practical design guidance. It also distinguishes documented drop-in replacements from unverified alternatives, helping engineers avoid assuming that a similar MCU is pin-compatible without checking its complete electrical and pin definitions.

RFQ संपर्क
C8051F042 - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs
C8051F042

C8051F042 - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F042 is a mixed-signal 8-bit microcontroller built around the 8051 core and operating at up to 25 MHz. It integrates 64 KB of Flash program memory, a 10-bit SAR ADC with 13 channels and throughput up to 100 ksps, three comparators, and CAN 2.0B communication in a 100-TQFP package. The device is positioned for industrial, embedded control, measurement, and communication designs that need more analog capability than a basic general-purpose microcontroller. The C8051F042 belongs to the C8051F04x family of highly integrated mixed-signal System-on-a-Chip MCUs. Within the semiconductor hierarchy, it is a microcontroller, a mixed-signal MCU, an embedded processor, and a semiconductor. Its 8051-compatible core combines deterministic embedded control with integrated data acquisition, making it suitable for sensor interfaces, motor and power control, industrial monitoring, and CAN-connected equipment. Key features include 25 MHz performance, 64 KB of Flash memory, a 10-bit SAR ADC, three comparators, and an integrated CAN 2.0B controller. The ADC can operate with single-ended or differential inputs and supports programmable throughput up to 100 ksps according to the manufacturer data-sheet information. These resources allow one device to acquire analog signals, execute control logic, and communicate with other embedded systems without requiring several separate analog and communication components. The C8051F042 also supports in-system programming and mixed-signal integration typical of the C8051F04x family. The 100-TQFP package provides 64 digital I/O pins according to the family overview, while the device-specific datasheet remains the authority for exact pin assignments, electrical limits, memory organization, and peripheral multiplexing. The 25 MHz operating point supports faster control-loop execution and signal sampling than lower-speed members of the same family, subject to the specified clock and power-supply requirements. Typical applications include industrial data-acquisition systems, CAN bus equipment, sensor interfaces, motor-control subsystems, embedded instrumentation, and communications modules. In a measurement system, the internal ADC and comparators can reduce the number of external signal-conditioning components, while the CAN controller supports networked industrial equipment. In a control system, the 8051 core can execute supervisory logic while the analog peripherals monitor thresholds and process sensor inputs. Designers should preserve the exact C8051F042 pinout and peripheral assignments when laying out a PCB, and should use the manufacturer data sheet for decoupling, clock, analog-reference, and mixed-signal grounding recommendations. Because the provided verified sources describe the part but do not provide a complete pin table, package drawing, current consumption values, or a verified distributor price list, those details remain marked for verification rather than being inferred. This page consolidates the verified C8051F042 specifications, distributor references, family alternatives, application guidance, and engineering-oriented design notes. The information is intended to support component identification, initial architecture selection, and sourcing comparisons while separating confirmed data from parameters that require direct review of the manufacturer documentation.

RFQ संपर्क
C8051F042R - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F042R

C8051F042R - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F042R is a mixed-signal 8-bit microcontroller built around the 8051 core and operating at up to 25 MHz. It integrates 64 KB of Flash program memory, a 10-bit SAR ADC with 13 channels and throughput up to 100 ksps, three comparators, and CAN 2.0B communication in a 100-TQFP package. The device is positioned for industrial, embedded control, measurement, and communication designs that need more analog capability than a basic general-purpose microcontroller. The C8051F042R belongs to the C8051F04x family of highly integrated mixed-signal System-on-a-Chip MCUs. Within the semiconductor hierarchy, it is a microcontroller, a mixed-signal MCU, an embedded processor, and a semiconductor. Its 8051-compatible core combines deterministic embedded control with integrated data acquisition, making it suitable for sensor interfaces, motor and power control, industrial monitoring, and CAN-connected equipment. Key features include 25 MHz performance, 64 KB of Flash memory, a 10-bit SAR ADC, three comparators, and an integrated CAN 2.0B controller. The ADC can operate with single-ended or differential inputs and supports programmable throughput up to 100 ksps according to the manufacturer data-sheet information. These resources allow one device to acquire analog signals, execute control logic, and communicate with other embedded systems without requiring several separate analog and communication components. The C8051F042R also supports in-system programming and mixed-signal integration typical of the C8051F04x family. The 100-TQFP package provides 64 digital I/O pins according to the family overview, while the device-specific datasheet remains the authority for exact pin assignments, electrical limits, memory organization, and peripheral multiplexing. The 25 MHz operating point supports faster control-loop execution and signal sampling than lower-speed members of the same family, subject to the specified clock and power-supply requirements. Typical applications include industrial data-acquisition systems, CAN bus equipment, sensor interfaces, motor-control subsystems, embedded instrumentation, and communications modules. In a measurement system, the internal ADC and comparators can reduce the number of external signal-conditioning components, while the CAN controller supports networked industrial equipment. In a control system, the 8051 core can execute supervisory logic while the analog peripherals monitor thresholds and process sensor inputs. Designers should preserve the exact C8051F042R pinout and peripheral assignments when laying out a PCB, and should use the manufacturer data sheet for decoupling, clock, analog-reference, and mixed-signal grounding recommendations. Because the provided verified sources describe the part but do not provide a complete pin table, package drawing, current consumption values, or a verified distributor price list, those details remain marked for verification rather than being inferred. This page consolidates the verified C8051F042R specifications, distributor references, family alternatives, application guidance, and engineering-oriented design notes. The information is intended to support component identification, initial architecture selection, and sourcing comparisons while separating confirmed data from parameters that require direct review of the manufacturer documentation.

RFQ संपर्क
C8051F043 - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs
C8051F043

C8051F043 - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs

Silicon Labs C8051F043 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 KB of program Flash, and integrated CAN 2.0B support. The device is identified in distributor listings as an 8051 C8051F04x MCU in a 64-pin TQFP package measuring 10 mm by 10 mm. Its analog features include a 10-bit, 13-channel ADC operating at up to 100 ksps and three comparators, making it suitable for embedded control systems that need digital processing alongside analog measurement. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output functions on one package. The C8051F043 belongs to the mixed-signal MCU category and combines an 8-bit 8051 processor with flash memory, analog conversion, comparison, and communications peripherals. This integration reduces the number of external components required in industrial instrumentation, embedded measurement, and CAN-connected control equipment. The key headline specifications are a 25 MHz operating frequency, 64 KB of Flash program memory, and a 10-bit ADC with 13 channels and 100 ksps conversion capability. The integrated CAN 2.0B controller is an important differentiator for applications requiring reliable communication between embedded nodes. The family description also identifies 32 digital I/O pins for the C8051F043 variant, while the larger C8051F040, F042, F044, and F046 members provide 64 digital I/O pins. Silicon Labs describes the C8051F04x devices as fully integrated mixed-signal system-on-chip MCUs with in-system programming capability and a broad set of analog and digital peripherals. The C8051F043 is appropriate when a design needs CAN connectivity, deterministic 8-bit processing, local analog sensing, and a compact surface-mount implementation without moving to a higher-cost 32-bit MCU. Typical uses include industrial sensor controllers, CAN bus nodes, motor and process-control equipment, instrumentation front ends, and embedded data-acquisition systems. The 10-bit ADC supports sensor monitoring and control loops, while the three comparators can assist with threshold detection and signal conditioning. The 64 KB Flash capacity provides room for application firmware and configuration logic. Designers should confirm the exact device pinout, electrical limits, oscillator requirements, programming interface, and ADC input conditioning against the manufacturer datasheet before layout. This page synthesizes verified distributor information, available cross-reference findings, and practical application guidance; unavailable pricing, pin-level details, and full electrical limits are explicitly marked rather than estimated.

RFQ संपर्क
C8051F043R - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs (Tape & Reel)
C8051F043R

C8051F043R - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs (Tape & Reel)

Silicon Labs C8051F043R is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 KB of program Flash, and integrated CAN 2.0B support. The device is identified in distributor listings as an 8051 C8051F04x MCU in a 64-pin TQFP package measuring 10 mm by 10 mm. Its analog features include a 10-bit, 13-channel ADC operating at up to 100 ksps and three comparators, making it suitable for embedded control systems that need digital processing alongside analog measurement. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output functions on one package. The C8051F043R belongs to the mixed-signal MCU category and combines an 8-bit 8051 processor with flash memory, analog conversion, comparison, and communications peripherals. This integration reduces the number of external components required in industrial instrumentation, embedded measurement, and CAN-connected control equipment. The key headline specifications are a 25 MHz operating frequency, 64 KB of Flash program memory, and a 10-bit ADC with 13 channels and 100 ksps conversion capability. The integrated CAN 2.0B controller is an important differentiator for applications requiring reliable communication between embedded nodes. The family description also identifies 32 digital I/O pins for the C8051F043R variant, while the larger C8051F040, F042, F044, and F046 members provide 64 digital I/O pins. Silicon Labs describes the C8051F04x devices as fully integrated mixed-signal system-on-chip MCUs with in-system programming capability and a broad set of analog and digital peripherals. The C8051F043R is appropriate when a design needs CAN connectivity, deterministic 8-bit processing, local analog sensing, and a compact surface-mount implementation without moving to a higher-cost 32-bit MCU. Typical uses include industrial sensor controllers, CAN bus nodes, motor and process-control equipment, instrumentation front ends, and embedded data-acquisition systems. The 10-bit ADC supports sensor monitoring and control loops, while the three comparators can assist with threshold detection and signal conditioning. The 64 KB Flash capacity provides room for application firmware and configuration logic. Designers should confirm the exact device pinout, electrical limits, oscillator requirements, programming interface, and ADC input conditioning against the manufacturer datasheet before layout. This page synthesizes verified distributor information, available cross-reference findings, and practical application guidance; unavailable pricing, pin-level details, and full electrical limits are explicitly marked rather than estimated.

RFQ संपर्क
C8051F044 - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs
C8051F044

C8051F044 - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs

The Silicon Labs C8051F044 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of flash memory, a 10-bit 13-channel 100 ksps ADC, three comparators, five 16-bit timers, and integrated CAN in a 100-pin QFP package measuring 14 x 14 mm. Its combination of digital control and analog measurement makes it suitable for industrial monitoring, data acquisition, communications, and embedded control systems. An 8-bit microcontroller is a compact embedded-processing device that executes firmware from program memory and interacts with external hardware through digital and analog peripherals. The C8051F044 belongs to the mixed-signal MCU category, combining the 8051 instruction-set architecture with on-chip analog-to-digital conversion, comparator functions, timers, and communication interfaces. This integration allows a board to measure and control physical variables without requiring separate external converter ICs in many designs. The device operates at 25 MHz and provides 64 kB, or 64K x 8 bits, of flash memory. Its on-chip RAM is 4.25 kB, while five 16-bit timers support periodic generation, timing, and event measurement. The integrated 10-bit ADC supports 13 channels at 100 ksps, and three comparators provide fast threshold detection for signals such as temperature, voltage, or industrial sensor outputs. Communication and timing resources extend beyond the basic ADC and comparator functions. The C8051F044 includes integrated CAN and additional communication interfaces for connected industrial equipment. Its 100-pin QFP package exposes the mixed-signal resources and supports a conventional leaded or gull-wing footprint rather than a fine-pitch BGA arrangement, making assembly and prototype inspection comparatively accessible. Typical uses include sensor acquisition and supervisory control, industrial communication nodes, motor or process monitoring, and embedded systems that require both analog measurements and deterministic control. The 13-channel ADC is useful for multichannel process inputs, while the comparators can generate fast threshold events without continuously sampling the analog domain. A critical design consideration is the 14 x 14 mm, 100-pin footprint and the allocation of analog, digital, power, and communication pins. Designers should use the manufacturer package drawing and pinout documentation to confirm every net, preserve analog routing discipline, and provide suitable bypassing close to the supply pins. This page consolidates the verified manufacturer and distributor information for the C8051F044, separates confirmed specifications from unavailable data, and provides practical application guidance and same-family drop-in candidates without presenting unsupported pricing or pin details as verified facts.

RFQ संपर्क
C8051F045 - 25MHz 8-Bit MCU, 64KB Flash, 64-TQFP | Silicon Labs
C8051F045

C8051F045 - 25MHz 8-Bit MCU, 64KB Flash, 64-TQFP | Silicon Labs

Silicon Labs C8051F045 is an 8-bit C8051F04x-series microcontroller operating at 25 MHz, with 64 KB of programmable flash memory, 4.25 KB of RAM, CAN connectivity, and a 64-pin TQFP package measuring 10 x 10 mm. The device operates from a 2.7 V to 3.6 V supply, making it suitable for low-voltage embedded control systems requiring CAN communication, moderate onboard code storage, and a conventional 8051-compatible architecture. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic on one semiconductor device. The C8051F045 belongs to the C8051F04x family of 8-bit microcontrollers, combining an 8051-compatible core with embedded flash, RAM, digital I/O, communication peripherals, and other mixed-signal resources. Within the product hierarchy, it is a microcontroller, embedded controller, and semiconductor intended for compact standalone control and communication tasks. The verified product information identifies a 25 MHz maximum operating frequency, 64 KB flash program memory, 4.25 KB RAM, and 2.7 V to 3.6 V supply range. Its 64-pin TQFP package provides substantially more connection options than smaller microcontroller packages and is appropriate for designs requiring external memory interfaces, communications, analog inputs, timers, or a larger number of general-purpose I/O pins. The listed C8051F045-GQ ordering option is identified as a RoHS-compliant, lead-free 64-TQFP variant. The C8051F045 architecture is positioned for embedded control rather than high-performance computing. Its 25 MHz clock provides deterministic operation for motor, machine, interface, and communications tasks, while the 64 KB flash region supports a larger embedded program than small-memory 8051 devices. The verified listing identifies CAN capability in the C8051F04x family, allowing the controller to participate in industrial and automotive networking designs when the remaining peripheral, transceiver, and timing requirements are satisfied. Typical applications include CAN-connected industrial controllers, automated test equipment, building-control modules, embedded data-acquisition units, instrumentation, and communication gateways. In a CAN node, the microcontroller executes application logic, handles digital inputs, controls outputs, and communicates through a separate CAN transceiver. The 64-TQFP package also makes the device practical for designs that need more peripheral access than a small 20- or 32-pin MCU can provide. Designers should verify the complete pin assignment and peripheral availability against the manufacturer datasheet before layout because the supplied search results establish the package size and pin count but do not provide a complete numbered pin table. The 3.3 V supply range also requires careful regulator selection, while CAN implementation depends on correct transceiver selection, bus termination, isolation requirements, and software timing. This page consolidates the verified distributor specifications, package information, availability observations, and engineering-oriented application guidance into one practical reference. It also separates directly verified facts from unavailable details so engineers can identify what still requires confirmation in the complete C8051F04x technical documentation.

RFQ संपर्क
C8051F046 - 25MHz 8-Bit MCU with 32KB Flash | Silicon Labs
C8051F046

C8051F046 - 25MHz 8-Bit MCU with 32KB Flash | Silicon Labs

Silicon Labs C8051F046 is an 8-bit C8051F04x-series microcontroller operating at up to 25 MHz, with 32 KB of flash program memory, a 100-lead TQFP package, a 10-bit ADC, and CAN connectivity. The device is supplied in a 100-pin 14 x 14 mm TQFP package and is associated with the 8K ISP Flash MCU family. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripheral interfaces, and I/O into one device. The C8051F046 belongs to the C8051 8-bit microprocessor family, where the 8051-compatible instruction set provides a compact platform for embedded control. Its mixed-signal and communications features make it suitable for industrial controllers, CAN-connected equipment, data acquisition systems, and legacy embedded designs. The C8051F046's headline specifications are its 25 MHz operating frequency, 32 KB flash memory, and 10-bit ADC. The supplied distributor information also identifies CAN capability, while the package listing specifies 100-TQFP (14 x 14 mm). These features support designs that require programmable logic, analog measurement, and network communication in one device. The C8051F04x designation identifies the family rather than implying that every family member has identical peripheral resources. The supplied search results describe the processor as a 25 MIPS device and identify the C8051F046 as an 8-bit, legacy-speed processor compatible with ASM51 instructions. This architecture is useful for control-oriented embedded products where a deterministic, compact instruction set and established 8051 software ecosystem are more important than a high-performance 32-bit or 64-bit core. Typical applications include industrial data logging, CAN-node controllers, motor and process-control equipment, instrumentation, and embedded systems connected to legacy 8051 peripherals. The ADC provides a direct path for analog sensor inputs, while CAN allows the controller to exchange data with other embedded nodes. Firmware selection must nevertheless confirm the exact peripheral map, pin assignments, and electrical limits for the chosen ordering code. Designers should use the official device documentation for the complete 100-pin pinout, power sequencing, clock configuration, and decoupling requirements. Because the supplied data does not expose individual pin functions, the C8051F046 pinout is marked unavailable rather than reconstructed from assumptions. This page distinguishes the base device from orderable package suffixes such as -GQ and -GQR and focuses on verified distributor and manufacturer-document information.

RFQ संपर्क
C8051F047 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs
C8051F047

C8051F047 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F047 is an 8-bit mixed-signal microcontroller with a 25 MHz 8051-compatible core, 32 KB of in-system programmable flash memory, 32 digital I/O pins, and integrated CAN 2.0B support. The device is identified in distributor listings as a 64-TQFP (10 x 10 mm) package, providing a compact surface-mount solution for embedded control, industrial communication, and mixed-signal sensing systems. A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripheral interfaces, and digital or analog I/O. The C8051F04x family belongs to the broader 8-bit microcontroller and embedded-controller hierarchy. The C8051F047 is particularly suited to designs requiring legacy 8051 software compatibility alongside higher-performance mixed-signal peripherals and serial communication capability. Key verified features include a 25 MHz maximum operating frequency, 32 KB (32K x 8) of flash memory, 32 digital I/O pins, a 10-bit 13-channel ADC operating at up to 100 ksps, and three comparators. A separate verified listing describes a 10-bit ADC with 13 channels and 100 ksps performance, while the family documentation identifies an integrated CAN 2.0B controller for communications-oriented designs. The C8051F047 uses the Silicon Labs CIP-51 8051-compatible core, as described in the available comparison material. Its mixed-signal feature set allows one device to perform digital control while also acquiring analog measurements and comparing sensor or signal thresholds. The 10-bit ADC and three comparators can reduce the need for separate analog front-end ICs in suitable designs. Typical applications include industrial automation and factory control, CAN-connected equipment, data acquisition, environmental monitoring, embedded instrumentation, and motor or process-control systems. The 64-TQFP package is appropriate for compact boards requiring a high pin count and stable manufacturing, although actual layout must follow the manufacturer pinout and recommended decoupling guidance. Designers should verify the exact C8051F047 package variant, pin assignment, electrical limits, clock configuration, ADC reference, and CAN implementation in the manufacturer datasheet before layout release. Because the available verified data does not provide complete pricing, pin-level details, or full electrical tables, this page distinguishes documented facts from parameters requiring confirmation. This page combines verified distributor identifiers, family-level mixed-signal capabilities, pricing context, drop-in candidates, and application guidance into a concise engineering reference for engineers evaluating the C8051F047 in embedded control designs.

RFQ संपर्क
C8051F060 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F060

C8051F060 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

The Silicon Labs C8051F060 is a mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 64 KB of in-system programmable flash, 59 digital I/O pins, two 16-bit 1 Msps ADCs, a 12-bit two-channel DAC, three comparators, and CAN 2.0B connectivity in a 100-pin TQFP package. It combines an 8051-compatible core with extensive analog, communications, timer, and industrial-control peripherals. A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog functions on one device. The C8051F060 belongs to the microcontroller hierarchy, where its CIP-51 core executes firmware while the integrated converters and comparators measure or generate analog signals. This consolidation can reduce board area, external component count, and system complexity in industrial control, instrumentation, communications, and embedded data-acquisition equipment. The device operates at 25 MHz and provides 64 KB of flash plus 4352 bytes of on-chip RAM. Its 59 general-purpose digital I/O lines support multiple ports, while its mixed-signal resources include two 16-bit high-speed SAR ADCs, an eight-channel 10-bit ADC, and a two-channel 12-bit DAC. Three analog comparators support thresholding, waveform generation, and basic autonomous control functions. Communications resources include two UARTs, SPI, hardware SMBus compatible with I2C, and CAN 2.0B. According to the Silicon Labs C8051F06x manufacturer datasheet, the peripheral set also includes a programmable 16-bit counter/timer array with six capture/compare modules, five general-purpose 16-bit timers, and a dedicated watchdog timer. An internal calibrated precision oscillator is specified at 24.5 MHz. Typical applications include industrial process control, CAN-connected equipment, data-acquisition systems, analog control panels, test and measurement products, and embedded controllers requiring both serial communications and analog conversion. The integration of ADC, DAC, comparators, timers, and multiple serial interfaces allows a compact design without requiring separate analog or communication ICs. Designers should verify the exact package suffix and pin mapping against the manufacturer datasheet, because C8051F060 is ordered in package-specific forms such as C8051F060-GQ. PCB layout should separate sensitive analog inputs from high-speed digital signals, provide appropriate analog grounding and bypass capacitance, and account for the thermal and decoupling requirements of the complete mixed-signal system. This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family drop-in options, and practical selection guidance. It is intended to help engineers identify the correct 100-pin variant, compare MCU resources, and evaluate whether the C8051F060 provides sufficient analog, communications, and digital I/O capability for a new embedded design.

RFQ संपर्क
C8051F060R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)
C8051F060R

C8051F060R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F060R is a mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 64 KB of in-system programmable flash, 59 digital I/O pins, two 16-bit 1 Msps ADCs, a 12-bit two-channel DAC, three comparators, and CAN 2.0B connectivity in a 100-pin TQFP package. It combines an 8051-compatible core with extensive analog, communications, timer, and industrial-control peripherals. A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog functions on one device. The C8051F060R belongs to the microcontroller hierarchy, where its CIP-51 core executes firmware while the integrated converters and comparators measure or generate analog signals. This consolidation can reduce board area, external component count, and system complexity in industrial control, instrumentation, communications, and embedded data-acquisition equipment. The device operates at 25 MHz and provides 64 KB of flash plus 4352 bytes of on-chip RAM. Its 59 general-purpose digital I/O lines support multiple ports, while its mixed-signal resources include two 16-bit high-speed SAR ADCs, an eight-channel 10-bit ADC, and a two-channel 12-bit DAC. Three analog comparators support thresholding, waveform generation, and basic autonomous control functions. Communications resources include two UARTs, SPI, hardware SMBus compatible with I2C, and CAN 2.0B. According to the Silicon Labs C8051F06x manufacturer datasheet, the peripheral set also includes a programmable 16-bit counter/timer array with six capture/compare modules, five general-purpose 16-bit timers, and a dedicated watchdog timer. An internal calibrated precision oscillator is specified at 24.5 MHz. Typical applications include industrial process control, CAN-connected equipment, data-acquisition systems, analog control panels, test and measurement products, and embedded controllers requiring both serial communications and analog conversion. The integration of ADC, DAC, comparators, timers, and multiple serial interfaces allows a compact design without requiring separate analog or communication ICs. Designers should verify the exact package suffix and pin mapping against the manufacturer datasheet, because C8051F060R is ordered in package-specific forms such as C8051F060R-GQ. PCB layout should separate sensitive analog inputs from high-speed digital signals, provide appropriate analog grounding and bypass capacitance, and account for the thermal and decoupling requirements of the complete mixed-signal system. This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family drop-in options, and practical selection guidance. It is intended to help engineers identify the correct 100-pin variant, compare MCU resources, and evaluate whether the C8051F060R provides sufficient analog, communications, and digital I/O capability for a new embedded design.

RFQ संपर्क