माइक्रोकंट्रोलर्स

उत्पाद (20,000+)

EFM32ZG110F4-QFN24T - 24MHz Cortex-M0+ 4KB MCU | Silicon Labs
EFM32ZG110F4-QFN24T

EFM32ZG110F4-QFN24T - 24MHz Cortex-M0+ 4KB MCU | Silicon Labs

The Silicon Labs EFM32ZG110F4-QFN24T is a 24 MHz ARM Cortex-M0+ microcontroller with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. It operates from a 1.98 V to 3.8 V supply and is designed for compact, energy-sensitive embedded systems. A microcontroller is an integrated semiconductor that combines a processor core, program memory, data memory, and peripherals in one package. The Zero Gecko family uses an ARM Cortex-M0+ core within the MCU hierarchy, while its low-power platform adds energy-saving modes, fast wake-up behavior, and autonomous peripheral operation. This makes it suitable for battery-powered sensing, metering, and small control systems that must respond quickly without continuously consuming maximum power. The EFM32ZG110F4-QFN24T combines a 24 MHz processor with 4 KB of Flash and 2 KB of SRAM. Silicon Labs specifies as little as 0.5 microamp in Stop mode and 114 microamps per MHz in Run mode, supporting designs that spend most of their operating life in a low-power state. Its 17 digital I/O pins provide connections for sensors, switches, indicators, and control signals within the limited footprint of a 5 x 5 mm QFN package. Two 16-bit timers support periodic timing, input capture, output compare, and basic pulse-width modulation functions. The Zero Gecko platform also integrates analog and communications peripherals around the 32-bit ARM Cortex-M0+ processor. The constrained 4 KB memory footprint favors compact firmware, while the 24 MHz clock rate provides adequate headroom for control loops, low-rate serial communication, and sensor aggregation rather than graphics or high-throughput data processing. Typical applications include compact energy meters, gas and water sensing nodes, battery-operated industrial monitors, environmental sensors, and wearable or IoT accessory controllers. The 24-QFN package also supports space-constrained products in which board area, supply voltage, and standby current are more important than large program storage. The -QFN24T ordering code identifies the manufacturer's tape-and-reel package format. Designers should verify the exact exposed-pad connection, decoupling requirements, and available peripheral pins against the EFM32ZG data sheet before layout release. Because the Flash and RAM capacities are small, firmware architecture, constant-data placement, and peripheral initialization sequence should be reviewed early rather than after application code is complete. This page consolidates manufacturer specifications, distributor availability references, same-footprint Zero Gecko alternatives, and application-specific engineering guidance that is not presented as a single block in the manufacturer data sheet.

RFQ संपर्क
EFM32ZG110F8-B-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32ZG110F8-B-QFN24

EFM32ZG110F8-B-QFN24 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG110F8-B-QFN24 is a 24 MHz ARM Cortex-M0+ microcontroller with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. Designed around the EFM32 Zero Gecko low-power platform, it combines a 32-bit processor, fast wake-up operation, and energy-saving modes for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one control device. In the technology hierarchy, the EFM32ZG110 belongs to the ARM Cortex-M0+ class of 32-bit microcontrollers, which sit above 8-bit controllers in processing capability while retaining a simple embedded-system architecture. Its memory, GPIO, timers, analog functions, and communication peripherals make it suitable for control, sensing, metering, and low-power IoT endpoints. The device operates at up to 24 MHz and provides 8 kB Flash for firmware and 2 kB RAM for working data. Its 17 digital I/O pins support external sensors, switches, indicators, and actuators. Two 16-bit timers are useful for periodic generation, input capture, timing, and basic motor or dimming control. The 24-QFN package supports compact, high-density PCB layouts in energy-sensitive industrial and embedded applications. The EFM32ZG platform emphasizes low-power operation and short wake-up times. According to the Silicon Labs EFM32ZG datasheet, the family can consume as little as 0.5 microampere in Stop mode and 114 microampere per megahertz in Run mode. This makes the MCU useful in systems that spend most of their operating time asleep, where average current depends strongly on duty cycle, peripheral activity, and wake-up frequency. Typical uses include smart energy and gas meters, water-monitoring equipment, industrial sensing nodes, compact control panels, and connected low-power sensors. The device can coordinate acquisition and processing through its integrated peripherals while limiting the external component count needed for embedded control. Its 8 kB Flash is appropriate for compact applications with a controlled firmware footprint rather than memory-intensive connectivity stacks. Hardware design should preserve clean supply decoupling, assign all QFN perimeter pins according to the manufacturer pin-description table, and verify that the exposed-pad connection and PCB thermal design follow the package guidance. Firmware should also use the device's low-energy modes deliberately because measured battery life depends on how often the processor and peripherals wake from sleep. This page organizes the EFM32ZG110F8-B-QFN24 specifications, same-footprint alternatives, practical application guidance, and engineering trade-offs to support faster component selection and board-level implementation.

RFQ संपर्क
EFM32ZG110F8-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG110F8-QFN24

EFM32ZG110F8-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG110F8-QFN24 is a 24 MHz ARM Cortex-M0+ microcontroller with 8 kB Flash memory, 2 kB RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. Designed around Silicon Labs' energy-conscious EFM32 platform, this MCU combines a compact 32-bit architecture with low-power operating techniques, fast wake-up behavior, and energy-saving modes for embedded systems requiring low standby power. The device also includes ADC and AES capabilities according to the manufacturer product-page and distributor records. An EFM32 microcontroller belongs to the 32-bit embedded MCU hierarchy, where Cortex-M0+ processor cores execute compact real-time control software in compact embedded systems. The Cortex-M0+ architecture is positioned below more feature-rich Cortex-M processors in performance and system complexity, while retaining a 32-bit instruction set, efficient interrupt handling, and a broad embedded-software ecosystem. EFM32 devices add energy-focused peripherals and low-power modes to that foundation, making them especially useful for battery-operated sensing, metering, and control products. The EFM32ZG110F8-QFN24 operates up to 24 MHz and provides 8 kB Flash for firmware and 2 kB RAM for working data. Its 17 digital I/O pins support external sensors, indicators, actuators, and digital interfaces, while two 16-bit timers support periodic timing, pulse measurement, and basic control functions. The manufacturer identifies fast wake-up and energy-saving modes as defining platform characteristics, allowing the MCU to remain responsive while reducing activity during idle intervals. The available records additionally identify an ADC and AES hardware capability, making the MCU relevant to designs that measure analog quantities or protect locally stored or communicated data. These functions share the same constrained 8 kB Flash and 2 kB RAM budget as the target part, so firmware size, RAM allocation, interrupt latency, and peripheral-resource conflicts should be reviewed together before committing to a design. The exact converter resolution, AES implementation details, and complete electrical limits were not supplied in the verified records and therefore must be confirmed in the manufacturer documentation. Typical uses include compact energy meters, smart gas, water, and utility monitoring nodes, portable industrial sensing modules, low-power alarm and control units, and small IoT endpoints. In each case, the 24 MHz processing rate is suitable for lightweight control tasks, while the 17 GPIO count and two timers help connect sensors and timed outputs without requiring a larger package. The 24-QFN 5 x 5 mm footprint favors compact board layouts, although its exposed-pad thermal and assembly requirements need careful PCB planning. A key design consideration is that the 2 kB RAM limits concurrent buffers and stack depth, while the 8 kB Flash limits the available firmware image. Developers should reserve memory for the bootloader, application code, library overhead, and update mechanisms, and should verify that the intended peripherals remain available on all exposed pins. Wake sources, voltage settings, decoupling, and pin multiplexing should be confirmed against the exact device revision before schematic release. This page consolidates the verified manufacturer and distributor specifications, compares documented same-package alternatives, and adds practical memory, PCB, and low-power design guidance that is not presented as a single consolidated decision in the underlying search records.

RFQ संपर्क
EFM32ZG210F32-QFN32 - 24MHz Cortex-M0+ 32KB Flash MCU | Silicon Labs
EFM32ZG210F32-QFN32

EFM32ZG210F32-QFN32 - 24MHz Cortex-M0+ 32KB Flash MCU | Silicon Labs

The Silicon Labs EFM32ZG210F32-QFN32 is a 32-bit ARM Cortex-M0+ microcontroller rated to 24 MHz, with 32 kB of embedded Flash, 4 kB of RAM and 24 digital I/O pins, housed in a 32-pin QFN (6x6 mm) surface-mount package with an exposed thermal pad. It operates from a single 1.85 V to 3.8 V supply (2.5 V / 3.3 V rails typical) across a -40 °C to +85 °C temperature range. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory and peripherals onto one die. The EFM32ZG210F32-QFN32 belongs to the EFM32 Zero Gecko family, a 32-bit microcontroller (MCU) line from Silicon Labs built around the low-power ARM Cortex-M0+ processor. In the wider semiconductor hierarchy it sits at the intersection of embedded processing and energy-conscious IoT design: MCU -> 32-bit microcontroller -> embedded processor -> integrated circuit. Key features include an ARM Cortex-M0+ core clocked up to 24 MHz, 32 kB Flash with a pre-programmed UART bootloader, 4 kB of SRAM, 24 GPIO pins, two 16-bit timers, hardware AES encryption and an ADC. Low-power figures are the headline differentiator: as little as 0.5 µA in Stop mode and roughly 114 µA/MHz in Run mode, with fast wake-up from the deep sleep states. Silicon Labs builds the device on its own energy-friendly platform, adding autonomous (interrupt-driven) peripherals so the CPU core can stay asleep while timers, ADC conversions and serial traffic continue. This reduces effective system energy rather than merely lowering the datasheet sleep current, which is what matters in coin-cell and energy-harvesting designs. Typical uses include battery-powered sensor nodes, Bluetooth and Zigbee radio SoC companions, smart meters, industrial monitoring and asset-tracking tags, portable medical accessories and low-power consumer wearables. The 32-pin QFN footprint also suits compact remote-control and home-automation handsets. When designing around this part, note that the 24 I/O pins are fewer than larger EFM32 packages offer, so plan pin multiplexing carefully for radio plus sensor plus UART designs. Also budget for the exposed pad's thermal path and for decoupling close to the supply pins. This page synthesizes Silicon Labs specifications, drop-in alternatives and practical design guidance that is not gathered together in the manufacturer datasheet, helping engineers qualify the part faster.

RFQ संपर्क
EFM32ZG210F4-B-QFN32 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG210F4-B-QFN32

EFM32ZG210F4-B-QFN32 - 24MHz Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG210F4-B-QFN32 is an ARM Cortex-M0+ Zero Gecko 32-bit microcontroller with a maximum clock frequency of 24 MHz, 4 KB of Flash memory, 2 KB of RAM, and a 32-QFN surface-mount package measuring 6 mm by 6 mm. The device is designed around the EFM32 low-power platform, which combines an energy-efficient processor core with fast wake-up behavior, low-power modes, and energy-saving peripherals. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, digital interfaces, timers, and analog or communication peripherals. The Zero Gecko family belongs to the hierarchy of 32-bit microcontroller, embedded processor, embedded controller, and semiconductor. It is especially relevant to battery-operated and energy-sensitive systems where active current, sleep current, and recovery time influence battery life. The EFM32ZG210F4 provides 24 digital I/O pins and two 16-bit timers in addition to its 4 KB Flash and 2 KB RAM. The Zero Gecko family also emphasizes autonomous peripherals, allowing selected tasks to operate with less processor intervention. The manufacturer EFM32ZG data sheet reports consumption as low as 0.5 uA in Stop mode and 114 uA/MHz in Run mode. These figures make the device applicable to small sensor nodes, compact control products, wearables, and portable instrumentation. The architecture uses an ARM Cortex-M0+ processor, a 32-bit RISC core suited to compact embedded systems. Its relatively small memory configuration favors control-oriented firmware rather than graphical interfaces or large data processing. The 24 MHz operating speed provides useful timing capability for digital control, communication, and periodic sensing while maintaining the low-power focus of the EFM32ZG family. Typical uses include battery-powered sensor nodes, energy-harvesting monitors, industrial sensing modules, compact motor or actuator controllers, portable medical accessories, and low-power IoT equipment. Autonomous peripheral operation can reduce the frequency at which the processor must wake, while the fast wake-up behavior helps systems respond to external events without continuous full-power operation. Designers should account for the limited 4 KB Flash and 2 KB RAM when selecting firmware, boot code, libraries, and stack depth. Decoupling, exposed-pad layout, clock configuration, and low-power mode transitions must follow the manufacturer datasheet. Production firmware should also be tested for boundary conditions involving temperature, supply voltage, sleep duration, and wake-up sources. This product record combines manufacturer specifications, distributor availability, packaging details, application guidance, and verified drop-in assessment. It distinguishes electrically identical ordering codes from true engineering substitutes, helping engineers avoid PCB and firmware risks when selecting replacements.

RFQ संपर्क
EFM32ZG210F4-QFN32 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG210F4-QFN32

EFM32ZG210F4-QFN32 - 24MHz Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG210F4-QFN32 is an ARM Cortex-M0+ 32-bit microcontroller with a maximum operating speed of 24 MHz, 4 KB of Flash memory, 2 KB of RAM, and 24 digital I/O pins in a 32-QFN 6 x 6 mm package. Designed around the EFM32 Zero Gecko low-power platform, the device combines a 32-bit ARM Cortex-M0+ processor with energy-saving modes, fast wake-up behavior, and autonomous peripherals for energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, communications interfaces, and digital I/O. The EFM32 Zero Gecko family belongs to the MCU, embedded processor, and energy-efficient semiconductor hierarchy. It is intended for applications where a compact controller must combine real-time control, low standby consumption, and limited memory requirements without requiring a higher-cost host processor. The principal device specifications include a 24 MHz maximum CPU frequency, 4 KB of Flash organized as 4K x 8, 2 KB of SRAM, and 24 digital I/O pins. The EFM32ZG family provides two 16-bit timers, an integrated analog and peripheral architecture, and low-energy operating modes. Silicon Labs states that EFM32ZG devices can consume as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode, making the device suitable for battery-operated equipment and intermittent-sampling systems. The EFM32ZG210F4-QFN32 uses an ARM Cortex-M0+ processor with fast wake-up support and low-energy techniques. Its compact memory footprint is appropriate for compact control tasks, while the 24 digital I/O pins provide external connectivity for sensors, indicators, actuators, and digital interfaces. The 32-QFN 6 x 6 mm package supports space-constrained designs, but exposed-pad layout and thermal management must be considered during PCB implementation. Typical uses include battery-powered sensor nodes, industrial condition-monitoring equipment, compact access-control products, low-power sensing modules, and embedded industrial controls. In these systems, Stop mode can reduce consumption between events, while autonomous peripherals may support low-latency measurement and wake-up behavior. For motor, actuator, or high-current loads, the MCU should supervise separate driver circuitry rather than directly power the load. Designers should follow Silicon Labs hardware-design guidance, place decoupling capacitors close to the supply pins, and connect the exposed pad according to the package land pattern. Confirm the exact pin assignments, electrical limits, and board requirements in the EFM32ZG data sheet and EFM32 Hardware Design Considerations application note before layout release. Do not infer unused-pin or reserved-pin behavior from the abbreviated distributor listings. This product page consolidates the verified manufacturer specifications, package details, sourcing information, and engineering guidance. It also distinguishes documented drop-in family variants from unqualified cross-package alternatives, helping engineers evaluate the EFM32ZG210F4-QFN32 for low-power embedded designs without treating differently packaged MCUs as direct replacements.

RFQ संपर्क
EFM32ZG210F4-QFN32T - 24MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32ZG210F4-QFN32T

EFM32ZG210F4-QFN32T - 24MHz ARM Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG210F4-QFN32T is an ARM Cortex-M0+ 32-bit microcontroller rated up to 24 MHz, with 4 KB of Flash memory, 2 KB of SRAM, and 24 digital I/O pins in a 32-QFN 6 mm × 6 mm package. The device combines an energy-efficient Cortex-M0+ processor with integrated analog and communications peripherals for compact, low-power embedded systems. A microcontroller is a programmable semiconductor system that combines a processor core, memory, I/O ports, and peripherals on one integrated circuit. The EFM32ZG belongs to the Zero Gecko family, where MCU is the common synonym for microprocessor integrated into a single chip. Its hierarchy extends from a 32-bit ARM Cortex-M0+ embedded microcontroller to a low-power embedded processing IC commonly used for battery-operated and embedded control products. Key features include a maximum clock speed of 24 MHz, 4 KB Flash organized as 4K × 8, 2 KB RAM, 24 digital I/O pins, and two 16-bit timers. The family also integrates ADC and AES hardware. According to the Silicon Labs EFM32ZG data sheet, the device can consume as little as 0.5 µA in Stop mode and 114 µA/MHz in Run mode, making energy-conscious operating profiles central to the platform. The architecture emphasizes autonomous peripherals, analog integration, and fast wake-up from energy-saving modes. The Cortex-M0+ core provides 32-bit processing while maintaining a compact, power-conscious implementation. This balance makes the MCU suitable where a higher-performance processor would add unnecessary cost, board area, or active current, but conventional low-power 8-bit controllers would provide insufficient processing capability or peripheral integration. Typical applications include battery-powered sensors, compact industrial monitoring equipment, wearable accessories, connected IoT nodes, and low-power embedded controllers. The 24 digital I/O pins support external sensors and actuators, the ADC supports analog measurements, and the AES accelerator supports hardware-assisted encrypted data handling. The 32-QFN package also supports compact board layouts when its exposed-pad thermal requirements are followed. The primary design consideration is power-rail and thermal planning. The manufacturer documentation states that AVDD_x, VDD_DREG, and IOVDD_x must be connected together at the PCB level, with an optional filter, so those supplies require careful routing and decoupling. Designers should also follow Silicon Labs application note AN0002, “EFM32 Hardware Design Considerations,” for practical schematic and layout guidance. This product record combines verified manufacturer specifications, distributor availability references, package details, pricing fields, and practical hardware guidance. It also distinguishes verified orderable data from unresolved substitution information, helping engineers compare the Zero Gecko MCU without assuming that a similar package or processor speed guarantees pin-to-pin compatibility.

RFQ संपर्क
EFM32ZG210F8-B-QFN32 - 24MHz 8KB Cortex-M0+ MCU | Silicon Labs
EFM32ZG210F8-B-QFN32

EFM32ZG210F8-B-QFN32 - 24MHz 8KB Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG210F8-B-QFN32 is a 24 MHz ARM Cortex-M0+ Zero Gecko microcontroller with 8 KB of Flash memory, 2 KB of RAM, and 24 digital I/O pins in a 32-QFN 6 x 6 mm package. It combines a low-power embedded platform with 2 x 16-bit timers and operates from a 1.98 V to 3.8 V supply range. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one package. The EFM32 Zero Gecko family belongs to the hierarchy of 32-bit microcontroller, embedded processor, and low-power semiconductor devices. The ARM Cortex-M0+ architecture provides a compact instruction set suited to control-intensive systems that prioritize energy efficiency, predictable response, and low system complexity. Key features include a maximum operating frequency of 24 MHz, 8 KB Flash, and 2 KB RAM. Silicon Labs specifies run-mode consumption as low as 114 uA/MHz and stop-mode consumption as low as 0.5 uA. The device also provides autonomous peripherals, analog integration, energy-saving modes, and fast wake-up behavior. These characteristics make it useful where the controller must monitor sensors, update outputs, and remain available for infrequent communication without continuously loading a battery. The EFM32ZG210F8-B-QFN32 is based on the 32-bit ARM Cortex-M0+ processor and provides 24 digital I/O pins for external sensing, switching, and control functions. Its 2 x 16-bit timers support periodic timing and event generation. The integrated analog and peripheral resources reduce the need for external components in compact sensing and energy-harvesting products. Typical applications include smart energy meters, water and gas meters, industrial sensor nodes, wearable devices, and low-power IoT equipment. In these systems, the 8 KB Flash capacity suits compact firmware, while the 2 KB RAM allows moderate protocol buffering and peripheral management without requiring a larger microcontroller. Designers should follow Silicon Labs hardware guidance in application note AN0002, EFM32 Hardware Design Considerations. In particular, the AVDD_x, VDD_DREG, and IOVDD_x pins must be connected together at the PCB level, with an optional filter, and supply decoupling should follow the manufacturer reference layout. This page combines manufacturer specifications, distributor availability references, same-package Zero Gecko options, and practical hardware-design notes to support part selection and PCB planning beyond a distributor listing alone.

RFQ संपर्क
EFM32ZG210F8-QFN32 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG210F8-QFN32

EFM32ZG210F8-QFN32 - 24MHz Cortex-M0+ MCU | Silicon Labs

The Silicon Labs EFM32ZG210F8-QFN32 is a 32-bit ARM Cortex-M0+ microcontroller operating up to 24 MHz, with 8 kB of Flash memory, 2 kB of RAM, and 24 digital I/O pins in a 32-QFN 6 x 6 mm package. It belongs to the EFM32 Zero Gecko family and combines a compact embedded processing core with low-power operating modes for energy-sensitive embedded systems. An ARM Cortex-M0+ microcontroller is a reduced-instruction-set embedded processor used to monitor sensors, process control signals, and manage system peripherals. The Cortex-M0+ architecture belongs to the broader microcontroller and embedded-processing hierarchy, while the EFM32 Zero Gecko family adds energy-saving features, fast wake-up behavior, autonomous peripherals, and integrated analog functions for compact control designs. The EFM32ZG210F8-QFN32 provides 8 kB of Flash, 2 kB of RAM, 24 digital I/O pins, and two 16-bit timers. Its 24 MHz maximum operating speed supports responsive control tasks while the device can consume as little as 0.5 uA in Stop mode and 114 uA/MHz in Run mode, according to the Silicon Labs EFM32ZG datasheet. These figures make the MCU suitable for systems where average power consumption is more important than sustained processing throughput. The Zero Gecko platform emphasizes low-energy operation rather than high-performance computation. Its sleep and stop behavior allows firmware to remain responsive to selected events while reducing energy use between measurements. The EFM32 implementation also includes a Wake-up Interrupt Controller for managing interrupts that occur while the CPU is asleep, supporting duty-cycled sensing and control systems that must promptly resume computation. Typical uses include battery-powered energy and gas meters, smart water meters, compact environmental sensors, industrial monitoring nodes, and other embedded systems that periodically acquire data and transmit or display results. The 32-QFN package supports high-density placement on compact boards, while the 24 I/O pins provide connections for digital inputs, outputs, serial interfaces, and external sensing hardware. Designers should account for the limited 8 kB Flash and 2 kB RAM when planning firmware, boot code, diagnostics, and communication buffers. The manufacturer datasheet directs PCB designers to the “AN0002 EFM32 Hardware Design Considerations” application note for board-layout guidance, including decoupling and exposed-pad implementation. This page consolidates verified manufacturer specifications, distributor references, same-family drop-in candidates, package details, and practical design guidance. It is intended to help engineers evaluate the EFM32ZG210F8-QFN32 for compact, low-power embedded designs without substituting unsupported specifications.

RFQ संपर्क
EFM32ZG222F16-QFP48 - 24MHz 16KB MCU | Silicon Labs
EFM32ZG222F16-QFP48

EFM32ZG222F16-QFP48 - 24MHz 16KB MCU | Silicon Labs

Silicon Labs EFM32ZG222F16-QFP48 is a 32-bit ARM Cortex-M0+ Zero Gecko microcontroller rated for operation up to 24 MHz, with 16 kB of Flash memory, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers in a 48-pin TQFP package measuring 7 x 7 mm. It is designed for energy-sensitive embedded systems that require efficient processing, low-power operation, fast wake-up behavior, and energy-saving modes. The device supports 2.5 V and 3.3 V supply configurations according to the verified product data. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, working RAM, and peripherals into one compact package. The ARM Cortex-M0+ architecture belongs to the embedded processor hierarchy and is commonly used for control-oriented products requiring deterministic operation and efficient code execution. Within the EFM32 product family, the Zero Gecko platform emphasizes low-power sensing and control rather than high-performance compute. The EFM32ZG222F16-QFP48 combines a 24 MHz Cortex-M0+ core with 16 kB Flash and 4 kB RAM. Its 37 digital I/O pins provide connections for sensors, indicators, actuators, and control signals. Two 16-bit timers support periodic timing, event counting, and basic control-loop tasks. The manufacturer describes the platform as incorporating low-energy techniques, fast wake-up times, and energy-saving modes for battery-powered and other energy-conscious equipment. The device family also emphasizes autonomous peripherals, analog integration, and low power consumption. According to the Silicon Labs Zero Gecko datasheet, Zero Gecko devices can consume as little as 0.5 microamp in Stop mode and 114 microamps per megahertz in Run mode. These figures make the MCU suitable for systems that spend substantial time between infrequent user interactions or sensor events and must maintain a low average power budget. Typical uses include connected utility meters, water and gas monitoring, industrial sensing nodes, compact environmental monitors, and low-power embedded controls. In these systems, the Cortex-M0+ processor handles local logic while the integrated timers and digital I/O manage periodic sampling, status indicators, and external interfaces. Battery operation benefits from the documented Stop and Run current characteristics, although the final battery life depends on the complete firmware duty cycle, sensor load, and supply circuitry. Designers should verify the exact pin multiplexing, peripheral assignments, and board requirements against the manufacturer datasheet before layout. Decoupling, grounding, programming access, clock configuration, and unused-pin treatment are especially important in a 48-pin mixed-signal embedded design. The supplied web evidence does not include a complete 48-pin assignment, so this page does not reproduce an inferred pinout or fabricate individual signal names. This page consolidates the verified manufacturer and distributor data into an application-oriented overview of the EFM32ZG222F16-QFP48. It also separates confirmed memory, speed, package, and low-power characteristics from unverified attributes and explains why fewer drop-in alternatives are listed than normally required. Engineers can use the comparison table, practical design notes, and sourcing questions to evaluate the MCU without mistaking incomplete public snippets for complete datasheet coverage.

RFQ संपर्क
EFM32ZG222F32-QFP48 - 24 MHz Cortex-M0+ 32KB MCU | Silicon Labs
EFM32ZG222F32-QFP48

EFM32ZG222F32-QFP48 - 24 MHz Cortex-M0+ 32KB MCU | Silicon Labs

The Silicon Labs EFM32ZG222F32-QFP48 is an ARM Cortex-M0+ Zero Gecko microcontroller operating up to 24 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 37 digital I/O pins in a 48-TQFP 7 x 7 mm package. It is designed for energy-sensitive embedded systems that need low-power operation, fast wake-up behavior, and autonomous peripheral operation without relying on an active CPU loop. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as GPIO, timers, communications interfaces, and analog blocks. The EFM32ZG Zero Gecko family combines a 32-bit ARM Cortex-M0+ processor with Silicon Labs low-energy techniques. This positions the device within the hierarchy of embedded controller, microcontroller, 32-bit microcontroller, ARM Cortex microcontroller, and power-management-oriented embedded processing. The verified device data identifies 24 MHz operating speed, 32 kB Flash, 4 kB RAM, 37 digital I/O pins, and two 16-bit timers. The EFM32ZG family data also reports consumption as low as 0.5 uA in Stop mode and 114 uA/MHz in Run mode. Autonomous peripherals allow supported timer, ADC, and communication activity to continue while the processor sleeps, reducing the energy cost of periodic sensing and control tasks. Supply voltage is specified as 1.98 V to 3.8 V, supporting both 2 V and 3.3 V powered systems. The integrated analog and communications resources make the device applicable to industrial control, energy measurement, smart metering, connected sensing, and low-power embedded products. Battery-operated designs benefit from fast wake-up behavior and energy-saving modes that reduce unnecessary processor activity. Engineering trade-offs include a modest 4 kB SRAM budget for protocol buffering and application data, and a Cortex-M0+ core intended for compact control workloads rather than heavy graphics or complex digital signal processing. Board designs should provide the voltage range required by the device and verify decoupling, clock, debug, and exposed-pin requirements against the manufacturer datasheet. This page combines manufacturer specifications, distributor availability, power characteristics, package details, and practical replacement analysis. It also distinguishes a verified same-footprint option from reel packaging variants and cross-family parts that are not automatically pin-to-pin compatible.

RFQ संपर्क
EFM32ZG222F4-B-QFP48 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs
EFM32ZG222F4-B-QFP48

EFM32ZG222F4-B-QFP48 - 24MHz ARM Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG222F4-B-QFP48 is a 32-bit ARM Cortex-M0+ microcontroller rated up to 24 MHz, with 4 KB of flash memory, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. The device operates from 1.98 V to 3.8 V and is designed for energy-sensitive embedded systems that require low-power operation, fast wake-up behavior, and integrated peripherals. A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals. The EFM32 Zero Gecko family belongs to the 32-bit MCU and embedded-controller hierarchy, combining an Arm Cortex-M0+ core with energy-saving modes suitable for battery-powered, industrial, and connected equipment. Key features include a maximum 24 MHz processor clock, 4 KB flash, 2 KB RAM, 37 digital I/O pins, and two 16-bit timers. According to the Silicon Labs EFM32ZG data sheet, the family consumes as little as 0.5 µA in Stop mode and 114 µA/MHz in Run mode. These figures make the device appropriate for meter, sensor-node, and portable applications where average energy use matters more than peak processing throughput. The EFM32 architecture emphasizes autonomous peripherals, fast transitions between low-energy states, and extensive analog and digital integration. Its Cortex-M0+ core supports efficient event-driven control, while its timers and communication peripherals can reduce the need for continuous central-processor intervention. This architecture is especially useful in systems that must periodically acquire data, process it locally, and sleep for most of the operating cycle. Typical applications include smart energy meters, gas and water meters, industrial sensor nodes, compact environmental monitors, and battery-powered accessories. The 37 digital I/O pins provide interface flexibility for sensors, switches, indicators, and external converters, while the 48-pin TQFP package supports conventional surface-mount assembly and prototype-board routing. Designers should preserve the device's decoupling and exposed-ground requirements, follow the recommended pin multiplexing in the manufacturer pin-description table, and validate firmware against the selected clock, flash, and peripheral configuration. If software must operate with a larger firmware image or RAM working set, choose a member with sufficient memory rather than changing code without a complete peripheral and memory-map review. This product record combines manufacturer specifications, package details, verified sourcing information, and same-family drop-in alternatives. It also identifies memory-capacity trade-offs that matter when evaluating replacements, while keeping package and pin compatibility as the central PCB-level constraints.

RFQ संपर्क
EFM32ZG222F4-QFP48 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG222F4-QFP48

EFM32ZG222F4-QFP48 - 24MHz Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG222F4-QFP48 is a 32-bit ARM Cortex-M0+ microcontroller operating up to 24 MHz, with 4 kB Flash, 2 kB RAM, and 37 digital I/O pins in a 48-pin TQFP (7 x 7 mm) package. It belongs to the Zero Gecko family and is designed for energy-sensitive embedded systems that require low-power operation, rapid wake-up, and compact code footprint. A microcontroller is an integrated circuit that combines a processor core, memory, peripherals, and I/O in one device. In the device hierarchy, the EFM32ZG222F4-QFP48 is a microcontroller, or MCU, within the broader category of embedded semiconductors. Its ARM Cortex-M0+ core supports compact, deterministic control tasks, while the Zero Gecko low-energy platform makes it suitable for systems that spend much of their operating time in low-power states. Key features include a maximum clock frequency of 24 MHz, 4 kB of Flash, 2 kB of RAM, and two 16-bit timers. The device also provides 37 digital I/O pins in its 48-lead package. Its low-power platform includes energy-saving modes and fast wake-up behavior, helping battery-operated products reduce the amount of time spent consuming power. The manufacturer documentation also identifies AES capability and an ADC in product-level descriptions. The EFM32ZG222 family combines an ARM Cortex-M0+ processor with low-power system features and a peripheral set intended for embedded control. Its small 4 kB Flash capacity favors compact firmware rather than GUI-heavy or connectivity-intensive applications. The 48-pin TQFP package provides substantially more I/O than smaller 20-pin or 32-pin devices, making it useful when external sensors, switches, indicators, or interface circuits require dedicated pins. Typical applications include low-power sensor nodes, connected accessories, compact industrial controllers, building-automation endpoints, portable measurement equipment, and consumer accessories. The combination of 24 MHz processing speed, 37 digital I/O pins, and low-energy modes supports periodic sensing, local control, and short communication transactions without requiring a higher-power MCU. When designing around this device, engineers should verify the exact peripheral pin assignments and electrical limits in the EFM32ZG222 datasheet. Decoupling, programming access, clock configuration, and low-power state transitions must be handled according to the manufacturer reference design; the 4 kB Flash and 2 kB RAM limits also require firmware-size budgeting before feature commitments. This product record combines manufacturer specifications, distributor availability, cross-reference evidence, and engineering-focused application guidance. It also distinguishes verified drop-in alternatives from options whose memory capacity or ordering code differs, helping designers make a replacement decision without relying on package similarity alone.

RFQ संपर्क
EFM32ZG222F8-B-QFP48 - 24MHz Cortex-M0+ MCU | Silicon Labs
EFM32ZG222F8-B-QFP48

EFM32ZG222F8-B-QFP48 - 24MHz Cortex-M0+ MCU | Silicon Labs

Silicon Labs EFM32ZG222F8-B-QFP48 is a 24 MHz ARM Cortex-M0+ Zero Gecko microcontroller with 8 KB Flash memory, 2 KB RAM, and 37 digital I/O pins in a 48-TQFP 7 x 7 mm package. Designed for energy-sensitive embedded systems, it combines a 32-bit processor with low-power operating modes, fast wake-up behavior, and integrated analog and digital peripherals. Its 1.98 V to 3.8 V operating range supports low-voltage 2 V and 3.3 V system designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32ZG222 belongs to the Zero Gecko family, a low-power platform within the broader hierarchy of ARM Cortex-M microcontrollers, embedded processors, and semiconductor devices. This combination allows a product to execute firmware, sample analog signals, control digital outputs, and manage communications without requiring several separate discrete components. Key features include a maximum 24 MHz operating frequency, 8 KB of Flash for program storage, 2 KB of RAM for working data, and two 16-bit timer peripherals. The device consumes as little as 0.5 uA in Stop mode, while its Run-mode consumption is specified at 114 uA/MHz. The 37 digital I/O pins provide flexible connections for sensors, controls, communication interfaces, and discrete logic. The EFM32ZG architecture uses the ARM Cortex-M0+ instruction set and a low-power design that supports energy-sensitive applications. Its peripheral integration includes timer resources for periodic measurement and control, analog capabilities for embedded sensing, and autonomous low-power behavior that can reduce reliance on continuous processor activity. The 48-TQFP package provides enough I/O and power connectivity for compact but feature-rich embedded boards. Typical uses include connected sensor nodes, smart utility and metering equipment, industrial monitoring, low-power remote controls, and consumer products that periodically wake to collect or transmit information. Its combination of 8 KB Flash, 2 KB RAM, and 37 I/O pins is especially suitable for compact control tasks where firmware size, peripheral count, and standby power are more important than maximum compute performance. Designers should use the EFM32ZG222 Hardware Design Considerations application note and the manufacturer datasheet when assigning the AVDD, VDD_DREG, and IOVDD pins. The device family documentation calls for these supply rails to be connected together at the PCB level, with an optional filter. Correct decoupling, exposed-pad implementation, and ground-return layout are essential for reliable operation and low-noise analog performance. This product record combines manufacturer specifications, package information, drop-in family options, and application-oriented engineering guidance. It is intended to help engineers identify the correct memory configuration, verify PCB compatibility, and select an appropriate low-power MCU without overlooking supply-rail, firmware-capacity, or pin-level constraints.

RFQ संपर्क
EFM32ZG222F8-QFP48 - 24MHz 8KB Flash MCU | Silicon Labs
EFM32ZG222F8-QFP48

EFM32ZG222F8-QFP48 - 24MHz 8KB Flash MCU | Silicon Labs

The Silicon Labs EFM32ZG222F8-QFP48 is an ARM Cortex-M0+ Zero Gecko microcontroller with a 24 MHz maximum clock, 8 KB Flash memory, 2 KB RAM, and 37 digital I/O pins in a 48-pin TQFP package. It is designed for energy-sensitive embedded systems that require a compact 32-bit controller, low-power operation, and rapid wake-up behavior. A microcontroller is an embedded semiconductor that integrates a CPU core, program memory, data memory, peripherals, and I/O into one device. The EFM32 Zero Gecko family belongs to the 32-bit microcontroller -> embedded processor -> semiconductor hierarchy. Its ARM Cortex-M0+ core provides a compact instruction set and event-driven execution, while the low-energy architecture supports duty-cycled products in which the MCU spends most of its time asleep. The verified device data identifies a 24 MHz operating speed, 8 KB Flash organized as 8K x 8, 2 KB RAM, and two 16-bit timers. The manufacturer describes fast wake-up times and energy-saving modes as core platform features. A 1.98 V to 3.8 V supply range appears in the alternatives cross-reference data, and the package is a 48-pin TQFP measuring 7 x 7 mm. The 37 digital I/O pins provide connections for sensors, actuators, communications, and user controls. This MCU is suitable for compact industrial sensing, connected sensor nodes, building controls, portable instruments, and low-power embedded products. Its small memory footprint favors focused control tasks rather than complex graphical interfaces or large application workloads. The 48-pin TQFP also exposes more I/O than the smallest packages while remaining compatible with conventional leaded assembly processes. Designers should verify the exact peripheral pin assignments, programming interface, and operating-mode limits against the manufacturer datasheet before layout release. Decoupling, ground-return planning, and separation between analog and digital circuitry remain important when the MCU drives sensors or communication modules. This page combines verified manufacturer and distributor information with practical selection guidance, application context, and compatibility-focused alternative research. It is designed to help engineers evaluate the EFM32ZG222F8-QFP48 faster while retaining traceability to the supplied product data.

RFQ संपर्क
EFM8BB21F16G-C-QFN20R - 50MHz 16KB 8-Bit MCU | Silicon Labs
EFM8BB21F16G-C-QFN20R

EFM8BB21F16G-C-QFN20R - 50MHz 16KB 8-Bit MCU | Silicon Labs

Silicon Labs EFM8BB21F16G-C-QFN20R is an 8-bit EFM8 Busy Bee microcontroller with a 50 MHz CIP-51 core, 16 KB of Flash memory, and a 20-QFN 3x3 mm package. The verified distributor listing identifies 16 digital I/O and 2.5 V/3.3 V operation, while the related Mouser result confirms 2.25 KB RAM. Its compact package and integrated analog peripherals suit space-constrained embedded systems. An 8-bit microcontroller is a programmable semiconductor containing a CPU core, memory, digital I/O, timers, and peripherals on one integrated circuit. The EFM8 Busy Bee family combines an 8051-compatible architecture with enhanced peripherals, allowing compact embedded controllers to execute control logic, sample analog signals, and manage communications without requiring separate components. This MCU therefore sits between a basic microcontroller and a more complex mixed-signal embedded controller. The verified data highlights a 50 MHz operating speed, 16 KB Flash, 2.25 KB RAM, 16 digital I/O lines, and a 3x3 mm QFN-20 package. Related Silicon Labs family information lists a 12-bit ADC, analog comparators, programmable counter array channels, and additional communication peripherals. These integrated resources reduce board area and simplify designs requiring sensor acquisition, timing, or low-speed communication. The C-QFN20R ordering suffix identifies a packaged 20-QFN tape-and-reel configuration; the provided data does not independently establish every electrical limit for this exact suffix. The family datasheet should be used for package dimensions, pin functions, electrical characteristics, clocking, memory behavior, and programming details. Because the MCU integrates both digital and analog functions, careful grounding and short analog traces remain important. Typical uses include compact sensor controllers, consumer-electronics accessories, motor-control or timing subsystems, medical-device control boards, and industrial automation modules. The 20-QFN package reduces footprint compared with larger leaded packages, but exposed-pad thermal management and assembly process controls must be considered. The 50 MHz core provides useful headroom when coordinating peripheral activity and control tasks. For PCB design, use the manufacturer datasheet and reference-manual pin definitions rather than assuming package-side numbering. Place decoupling capacitors close to supply pins, provide a clean analog reference and ground arrangement, and verify exposed-pad copper against the package drawing. Confirm programming, clock, reset, and boot requirements before committing the layout. This page combines verified distributor and manufacturer information with application guidance, datasheet links, and a cautious replacement analysis. Because exact electrical and lifecycle fields were not supplied in the source data, they are marked as needed instead of being inferred. That approach keeps purchasing and design decisions traceable to verifiable EFM8BB2 documentation.

RFQ संपर्क
EFM8BB21F16I-C-QSOP24 - 50MHz 8051 MCU, 16KB Flash, QSOP-24 | Silicon Labs
EFM8BB21F16I-C-QSOP24

EFM8BB21F16I-C-QSOP24 - 50MHz 8051 MCU, 16KB Flash, QSOP-24 | Silicon Labs

The Silicon Labs EFM8BB21F16I-C-QSOP24 is an 8-bit CIP-51 8051-core microcontroller from the Busy Bee 2 (EFM8BB2) family, operating at up to 50 MHz with 16 KB of Flash and 2.25 KB of RAM in a 24-pin QSOP package. It integrates a 12-bit ADC, enhanced PWM, and precision analog peripherals in a compact surface-mount footprint designed for space-constrained embedded designs. The industrial-grade device operates from a 2.2 V to 3.6 V supply across -40 to +125 C. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and a set of programmable I/O and peripheral interfaces. The 8051 architecture, introduced by Intel in 1980 and still widely used today, is a CISC 8-bit core with an instruction set optimised for bit-level control and small-form-factor embedded code. Silicon Labs' EFM8 Busy Bee line modernises this core with a single-cycle CIP-51 implementation, integrated high-precision analog, and a low-power platform aimed at industrial, consumer, and embedded-control applications. Key features include a 50 MHz single-cycle 8051 core delivering ~50 MIPS, 16 KB in-system programmable flash, 2.25 KB RAM, a 12-bit 200 ksps ADC, multiple timers (5 x 16-bit), a 3-channel PCA for PWM/capture, I2C/SPI/UART communication peripherals, and on-chip temperature sensor. The 24-pin QSOP package supports up to 21 digital I/O pins in a small 8.7 mm x 3.9 mm footprint suitable for high-density PCB designs. Typical applications include industrial sensor interfaces, LED lighting controllers, motor-control signal conditioning, capacitive-touch front panels, and consumer peripherals. The wide -40 to +125 C operating range and AEC-Q100 readiness on related family members also suit the device for automotive body and HVAC subsystems when used with automotive-graded siblings. When designing with the EFM8BB21F16I-C-QSOP24, ensure the supply rail is decoupled with at least a 1 uF bulk and 100 nF ceramic capacitor pair placed close to the VDD pin. The device has no internal regulator; the supply must remain within 2.2 V-3.6 V at all times including transients. Use Simplicity Studio for configuration, flashing, and energy profiling during development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
EFM8BB51F16G-C-QFN20R - 50MHz 16KB 8051 MCU | Silicon Labs
EFM8BB51F16G-C-QFN20R

EFM8BB51F16G-C-QFN20R - 50MHz 16KB 8051 MCU | Silicon Labs

Silicon Labs EFM8BB51F16G-C-QFN20R is an 8-bit CIP-51 8051 Busy Bee microcontroller operating at 50 MHz, with 16 kB Flash, 1.28 kB RAM, and 16 GPIO in a 20-QFN 3 x 3 mm package. It is designed for compact embedded control applications requiring efficient 8051 processing, integrated flash memory, and a broad set of peripherals. An 8-bit microcontroller such as the EFM8BB51F16G-C-QFN20R is a programmable semiconductor that executes firmware, reads inputs, controls outputs, and manages communication or timing functions within a larger embedded system. The EFM8 Busy Bee family belongs to the broader 8-bit MCU and embedded-processing hierarchy, making it suitable for control-centric products where cost, compactness, and deterministic peripheral integration matter more than high-end processing performance. The device provides 4 x 16-bit timers and 3 PCA channels according to the manufacturer product information. Its 50 MHz operating frequency supports efficient execution of typical control logic, while 16 kB Flash stores firmware and 1.28 kB RAM supports working data. The 16 GPIO provide connections for sensors, switches, actuators, indicators, and other embedded-system signals within the 3 x 3 mm QFN-20 footprint. The EFM8BB51 family uses the wide-supply 5 V Busy Bee platform and is specified for operation from -40 °C to 85 °C. The supplied manufacturer page identifies additional communication peripherals, although the exact peripheral inventory is not enumerated in the verified web data. Applications include compact sensor controllers, industrial monitoring modules, building-control interfaces, communication equipment, and low-cost consumer devices. The principal design consideration is package and firmware compatibility. EFM8BB51F16G-C-QFN20R must be placed on a PCB footprint matching the 20-QFN 3 x 3 mm package, with careful attention to exposed-pad layout, power routing, decoupling, and signal integrity. The manufacturer EFM8BB51 datasheet should be used as the authoritative source for pin assignments, electrical limits, startup behavior, and programming details. This product page consolidates verified distributor specifications, manufacturer documentation, package information, sourcing context, and practical design guidance. Availability and pricing should be checked against current distributor records, while lifecycle and exact alternate-device suitability should be confirmed before production release.

RFQ संपर्क
EFM8LB11F32ES1-C-QFN24R - 8-bit 72MHz Laser Bee MCU, 32KB Flash | Silicon Labs
EFM8LB11F32ES1-C-QFN24R

EFM8LB11F32ES1-C-QFN24R - 8-bit 72MHz Laser Bee MCU, 32KB Flash | Silicon Labs

The Silicon Labs EFM8LB11F32ES1-C-QFN24R is a CIP-51 8051-core "Laser Bee" 8-bit microcontroller running at 72 MHz with 32 KB flash and 2.25 KB RAM in a 24-pin QFN (3x3 mm) package. It is supplied on a 3.3 V typical rail (2.2 V to 3.6 V) and integrates a 14-bit ADC, two 12-bit DACs, a 4-channel PWM, and the standard EFM8 peripheral set including I2C, SPI, and UART. Laser Bee is Silicon Labs' high-throughput 8-bit MCU family that retains the classic 8051 instruction set while pushing the core to a 72 MHz pipeline, achieving roughly 50 MIPS effective throughput. In the broader taxonomy, EFM8LB1 sits under 8-bit microcontrollers, which are themselves a sub-category of microcontrollers (MCU), embedded controllers, and finally integrated circuits (IC). Compared with older 8051 parts (typically 12 MHz, 1 MIPS/MHz), the Laser Bee core delivers 7-8x higher compute density, making it suitable where determinism of the 8051 is preferred but throughput of an ARM Cortex-M0+ is not required. The device integrates 32 KB single-cycle flash, 2.25 KB RAM, 13 digital I/O (20 per the supplier listing) plus analog, an internal 49 MHz ±2% HFO, and a hardware cryptographic accelerator is not included at this family tier. Peripherals visible from the part number suffix ("S1") include UART, SMBus/I2C, SPI, PCA, timers, and a 14-bit 12-channel SAR ADC. The "C" in the suffix indicates revision C silicon, which improves ADC linearity and lowers active current compared with revision A/B parts. Architecturally, the Laser Bee core is a single-cycle 8051 with branch prediction and a tightly-coupled flash controller; this avoids the multi-cycle fetch penalty of legacy 8051s. The internal 49 MHz HFO can drive the core directly or be divided, and a low-frequency 32 kHz oscillator backs RTC-mode sleep. The 14-bit ADC at 900 ksps and two 12-bit DACs provide direct analog I/O for sensor conditioning loops without external converters. Typical applications include BLDC motor control (FOC sensorless), USB-C power delivery (PD) negotiation, portable medical sensor read-out, and lighting-control modules requiring up to 20 PWM channels. This part also fits general-purpose 8051 socket upgrades in industrial HMI and HVAC controllers where the existing firmware stack must be preserved. When designing with this part, route the QFN-24 exposed pad (pin 25 / DAP) directly to a contiguous ground pour - this is the primary thermal and electrical return path. Keep ADC traces short and symmetric, and use a separate analog supply decoupling node if mixed-signal accuracy matters. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not found in the manufacturer datasheet.

RFQ संपर्क
EFM8LB12F64E-C-QFN24 - 72MHz 8051 MCU 64KB Flash QFN-24 | Silicon Labs
EFM8LB12F64E-C-QFN24

EFM8LB12F64E-C-QFN24 - 72MHz 8051 MCU 64KB Flash QFN-24 | Silicon Labs

The Silicon Labs EFM8LB12F64E-C-QFN24 is a CIP-51 8051-core 8-bit microcontroller from the Laser Bee EFM8LB1 family, delivering 72 MHz CPU performance with 64 KB Flash, 4.25 KB RAM, and a high-integration analog peripheral set, housed in a 24-pin QFN (3x3 mm) package. It integrates a 14-bit 12-channel ADC capable of up to 900 ksps, four 12-bit DACs, two low-current comparators, and four configurable logic units, providing an analog-rich MCU for optical modules and precision sensing. An 8-bit microcontroller (MCU) such as this EFM8LB1 device is a single-chip computer that combines an 8051-compatible CPU core, Flash program memory, RAM, and a rich set of analog and digital peripherals. Within the broader semiconductor taxonomy, an MCU falls under microcontrollers, which in turn sit inside the integrated-circuits hierarchy as one of the most widely deployed device families for embedded control. The 8051 architecture, originally introduced by Intel in 1980, remains one of the longest-lived CPU instruction sets in the industry. Key features include 6 x 16-bit timers, multiple communication interfaces (UART, SPI, I2C, and integrated CAN), an on-chip VDD monitor, a watchdog timer, a ±2% internal oscillator, and an internal calibrated temperature sensor with ±3 °C accuracy. The pipelined CIP-51 core executes most instructions in one to two system clocks, effectively doubling throughput versus a standard 8051 running at the same frequency. Typical applications include optical modules, LED lighting controllers, sensor signal conditioning, industrial control nodes, and consumer devices that require both analog precision and 8-bit MCU economics. The wide 2.2V to 3.6V supply range and small 3x3 mm footprint suit space-constrained PCB designs. When designing with this part, ensure decoupling capacitors are placed close to VDD pins, and that ADC inputs are referenced properly to minimize conversion noise. Developers can use Silicon Labs' Simplicity Studio with the built-in configuration wizards to accelerate firmware bring-up.

RFQ संपर्क
EFM8LB12F64E-C-QFP32 - 72MHz 8051 MCU 64KB Flash | Silicon Labs
EFM8LB12F64E-C-QFP32

EFM8LB12F64E-C-QFP32 - 72MHz 8051 MCU 64KB Flash | Silicon Labs

The Silicon Labs EFM8LB12F64E-C-QFP32 is a high-performance 8-bit 8051 (CIP-51) microcontroller from the Laser Bee family, delivering 72 MHz core performance with 64 KB Flash and 4.25 KB RAM in a 32-pin QFP (7x7 mm) package. It integrates a 14-bit, 20-channel ADC capable of up to 900 ksps, four 12-bit DACs, two low-current analog comparators with adjustable reference, and four configurable logic units, all in a compact surface-mount form factor. An 8051 microcontroller is a Harvard-architecture 8-bit MCU originally introduced by Intel in 1980 and now widely produced as a licensed core. The CIP-51 variant from Silicon Labs is a pipelined enhancement of the original 8051 instruction set, achieving single-clock-per-instruction execution that delivers roughly 8-12x the performance of the standard 8051 at the same clock rate. Within the broader taxonomy, the EFM8LB1 sits as: microcontroller (MCU) -> embedded controller -> 8-bit MCU -> 8051-family MCU -> CIP-51 core MCU -> Laser Bee performance line. Key features include a wide 2.2V to 3.6V supply range, six 16-bit timers, multiple communication peripherals (I2C/SPI/UART), an integrated CAN controller, on-chip VDD monitor, hardware watchdog timer, and a ±2% internal oscillator that eliminates the need for an external crystal in many designs. The device is well suited to cost-sensitive optical module, sensor hub, and motor-control applications. Typical applications include optical modules and transceivers, IoT sensor nodes, industrial control interfaces, LED lighting controllers, low-end motor control, and consumer appliances. Designers choose this part for its high analog integration and small footprint. When designing with the EFM8LB12F64E-C-QFP32, ensure decoupling capacitors are placed close to VDD pins and that unused debug pins (such as C2CK/C2D) are handled per the reference manual to prevent leakage. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate supply-chain resilience.

RFQ संपर्क
EFM8UB20F64G-A-QFP48 - 8-bit USB MCU, 64kB Flash | Silicon Labs
EFM8UB20F64G-A-QFP48

EFM8UB20F64G-A-QFP48 - 8-bit USB MCU, 64kB Flash | Silicon Labs

The Silicon Labs EFM8UB20F64G-A-QFP48 is a high-speed 8-bit CIP-51 (8051-compatible) microcontroller from the EFM8 Universal Bee family, integrating a full-speed USB peripheral with an on-chip transceiver and clock recovery. It operates at 48 MHz, contains 64 kB of Flash, 4.25 kB of RAM, and is housed in a 48-pin TQFP (7x7 mm) package for surface-mount assembly. An 8-bit microcontroller (MCU) is a microprocessor integrated on a single IC with program memory (Flash), data memory (RAM), and peripheral interfaces. The 8051 architecture, originally introduced by Intel in 1980, remains widely used in cost-sensitive embedded applications. The CIP-51 core used by Silicon Labs is a pipelined 8051 implementation that executes most instructions in 1-2 system clocks, delivering roughly 10x the throughput of a standard 8051 at the same clock. The EFM8UB20F64G-A-QFP48 belongs to the universal-bee sub-family, which adds USB 2.0 full-speed support and analog peripherals aimed at USB human-interface and communication devices. Key features include 40 digital I/O pins, 6 x 16-bit timers, 5 programmable counter array (PCA) channels, a 10-bit differential ADC with EMIF, two low-current analog comparators, and integrated USB with on-chip transceiver. The wide operating voltage range of 2.4 V to 3.6 V suits battery-powered and USB bus-powered designs, while internal oscillators reduce external component count. Architecturally, the device combines an 8-bit ALU with a 2-stage pipeline, 256 bytes of internal data RAM, and 4 kB of XRAM accessible via MOVX. The USB block includes a Serial Interface Engine (SIE), dedicated 1.024 kB USB FIFO buffer, and integrated 3.3 V regulator for USB signaling, enabling bus-powered operation without external USB components. Typical applications include USB human-interface devices (HID), USB-to-UART bridges, gaming peripherals, USB sensors, low-cost instrumentation, and embedded consumer products that require a small footprint with on-board USB. The 48-TQFP package exposes enough I/O for matrix keypads, displays, and multiple serial peripherals. When designing with this part, ensure the USB D+/D- traces are 90 ohm differential and routed as short as possible. Decouple VDD with 100 nF plus 4.7 uF bulk capacitors placed close to the pins, and follow Silicon Labs reference design guidelines for EMI/ESD on the USB connector. This page synthesizes distributor pricing, drop-in alternatives from the EFM8UB2 family, and practical design notes not consolidated in any single manufacturer document.

RFQ संपर्क
EFM8UB20F64G-B-QFN32 - 48MHz USB 8051 MCU, 64KB Flash | Silicon Labs
EFM8UB20F64G-B-QFN32

EFM8UB20F64G-B-QFN32 - 48MHz USB 8051 MCU, 64KB Flash | Silicon Labs

The Silicon Labs EFM8UB20F64G-B-QFN32 is a USB-capable 8-bit CIP-51 (8051-compatible) microcontroller from the EFM8 Universal Bee family, operating at 48 MHz with 64 kB on-chip Flash and 4 kB RAM, housed in a 32-pin QFN (5x5 mm) package. It integrates a USB 2.0 full-speed device controller, 25 digital I/O pins, six 16-bit timers, and a five-channel Programmable Counter Array (PCA) for PWM and timing functions, plus a 10-bit differential ADC with 20 input channels. The 'B' temperature grade variant supports an operating range of -40C to +105C, making it suitable for industrial and consumer USB HID, CDC, and composite device designs. An 8-bit microcontroller (MCU) is an integrated circuit containing a CPU, program memory (Flash), data memory (RAM), and programmable I/O peripherals on a single die. The 8051 architecture, originally introduced by Intel in 1980, remains one of the most widely deployed MCU cores due to its compact code density, deterministic interrupt response, and low cost. The CIP-51 core implemented in EFM8UB2 devices executes most instructions in 1-2 system clocks at 48 MHz, giving 8051-class peripherals performance comparable to many 16-bit cores while preserving the 8051 instruction set for code reuse. Key features of the EFM8UB20F64G-B-QFN32 include an integrated USB 2.0 full-speed (12 Mbps) PHY and transceiver that eliminates the need for external USB components, a 10-bit 200 ksps SAR ADC with 20 channels and true differential inputs for sensor measurements, and two on-chip low-current analog comparators with adjustable reference. The device supports I2C, SPI, and UART serial interfaces, an external memory interface (EMIF), and a four-channel DMA controller that offloads data movement between peripherals and RAM. The EFM8UB2 architecture uses a pipelined CIP-51 core with a peak throughput of 48 MIPS at 48 MHz, and the device offers multiple low-power modes - including a 0.1 uA typical stop-mode current with full RAM retention - that make it well-suited to USB bus-powered and battery-powered applications. The integrated USB peripheral includes an on-chip 3.3V LDO regulator and 1.5 kOhm pull-up resistors, simplifying USB bus-powered designs to a minimum external BOM. Typical applications include USB HID input devices such as keyboards, mice, and game controllers, USB-to-UART bridge dongles, USB CDC virtual COM ports, USB composite devices combining HID + CDC, USB charging-port controllers, and industrial sensor interfaces with USB diagnostics. The wide temperature grade and integrated USB also fit point-of-sale (POS) terminals, barcode scanners, and laboratory instrumentation front panels. When designing with the EFM8UB20F64G-B-QFN32, ensure that VBUS sensing is correctly wired to the VBUS pin and that the D+ and D- lines use 90 ohm differential routing per USB 2.0 signal-integrity guidelines. Use the on-chip LDO output (VDD) to power external pull-up resistors rather than routing 5 V VBUS directly to logic-level pins. The internal 5 V tolerant I/O allows direct interfacing with USB VBUS signals without external level shifters. This page synthesizes current distributor stock and pricing, same-family drop-in variants, and practical design guidance for the USB-capable EFM8UB2 family - information not consolidated in any single manufacturer datasheet.

RFQ संपर्क
EFM8UB20F64G-B-QFN32R - 48MHz 8051 USB MCU, 64kB Flash | Silicon Labs
EFM8UB20F64G-B-QFN32R

EFM8UB20F64G-B-QFN32R - 48MHz 8051 USB MCU, 64kB Flash | Silicon Labs

The Silicon Labs EFM8UB20F64G-B-QFN32R is a high-performance 8-bit Universal Bee microcontroller built on the pipelined CIP-51 8051 core, operating at 48 MHz with 64 kB Flash and 4 kB RAM in a 32-pin QFN (5x5 mm) package. It integrates a full-speed USB 2.0 controller, 25 digital I/O pins, six 16-bit timers, five PCA channels, and a 10-bit differential ADC with multiple channels. The -B temperature grade targets -40C to +85C operation, while the -R suffix denotes Tape and Reel packaging for high-volume assembly. A Universal Bee 8-bit MCU is a small-form-factor microcontroller that combines a legacy-compatible 8051 instruction set with modern peripherals such as USB, I2C/SMBus, SPI, and UART. It belongs to the broader category of embedded microcontrollers, which sit below microprocessors and microprocessors with caches in the system hierarchy: microcontroller -> embedded controller -> IC. Universal Bee parts specifically target cost-sensitive USB-enabled applications where 8-bit density, deterministic interrupt response, and USB 2.0 full-speed (12 Mbps) connectivity outweigh the throughput of 32-bit Cortex-M0/M0+ alternatives. Key features of the EFM8UB20F64G-B-QFN32R include the USB 2.0 full-speed device controller with on-chip transceiver, a 10-bit 200 ksps differential SAR ADC, two on-chip low-current analog comparators with adjustable reference, brown-out reset and supply supervisor, and a hardware cipher engine for AES-128. The 32-QFN package measures 5x5 mm with an exposed pad for low thermal impedance. The device supports 2.7 V to 5.25 V supply, making it directly compatible with battery and USB bus-powered designs. Typical applications for this part are USB HID peripherals (keyboards, mice, game controllers), USB-to-UART bridges, USB CDC virtual COM ports, industrial sensor interfaces, and low-cost consumer appliances needing USB connectivity. The combination of 64 kB code space and USB in a compact 32-QFN makes it especially attractive for space-constrained dongles and wearables. When designing with this MCU, reserve the exposed pad (EP) for a continuous ground plane and connect it to GND through at least four thermal vias. Add a 1 uF and a 100 nF decoupling pair as close as possible to the VDD pin. The USB D+/D- traces must be 90 ohm differential, length-matched within 150 mil, and routed over a continuous ground reference for impedance control. This page synthesizes distributor pricing, drop-in alternatives from the same EFM8UB2 family, and practical design notes that go beyond what is in the manufacturer datasheet alone.

RFQ संपर्क