माइक्रोकंट्रोलर्स

उत्पाद (20,000+)

FS32K144WAT0WLFT - S32K144 80MHz 512KB Flash MCU | NXP
FS32K144WAT0WLFT

FS32K144WAT0WLFT - S32K144 80MHz 512KB Flash MCU | NXP

The NXP Semiconductors FS32K144WAT0WLFT is an automotive-grade 32-bit ARM Cortex-M4F microcontroller in the S32K1 family, delivering up to 80 MHz core performance with 512 KB of embedded Flash memory in a 48-pin LQFP (7x7 mm) package. It integrates CAN FD, LIN, FlexIO, and a hardware cryptographic security engine (CSEc) for secure on-board communications, targeting general-purpose automotive body and chassis applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, peripherals, and I/O on a single silicon die. Within the broader semiconductor hierarchy, an MCU is a sub-class of microcontroller -> embedded processor -> SoC -> semiconductor device. The S32K1 family further specializes in automotive-grade general-purpose MCUs (GPMs) that meet AEC-Q100 Grade 1/2 qualification, distinguishing it from industrial Cortex-M parts. The M4F core variant adds a single-precision Floating-Point Unit, easing signal-processing and sensor-fusion workloads. Key features include 64 KB SRAM, a 12-bit 1 Msps ADC with up to 16 channels, multiple timer modules (FlexTimer, eMIOS), and rich connectivity through CAN FD, LIN, SPI, UART, and I2C. The CSEc engine provides secure boot, key storage, and AES-128 acceleration, while a separate Cortex-M0+ core on select variants handles hardware security. Wide supply range (2.7 V to 5.5 V) supports both 3.3 V and 5 V automotive rails. The S32K144 architecture uses low-power modes (Halt, Stop, Run) with rapid wake-up via the ARM WFI/WFE instructions, enabling ECUs that draw <30 µA in standby while still supporting CAN wake-up. On-chip memory includes ECC on Flash and SRAM for ASIL-B functional safety support per ISO 26262. The device is qualified to AEC-Q100 Grade 1 (-40°C to +125°C), making it suitable for under-hood and body-domain modules. Typical applications include automotive body control modules (BCM), lighting controllers, seat and mirror modules, HVAC interfaces, CAN/LIN gateway nodes, and small sensor ECUs. Its combination of CAN FD, CSEc, and AEC-Q100 reliability targets the modern vehicle network where encrypted, low-latency communication and deterministic behavior are required. When designing with the FS32K144WAT0WLFT, ensure the chosen variant includes the peripherals your firmware expects - the LQFP-48 footprint limits exposed peripheral counts versus the LQFP-64 or LQFP-100 packages. Use the S32K1 SDK and configuration tools (S32 Config Tools, EB tresos) to validate pin allocation and peripheral routing before layout. This page synthesizes distributor pricing, parametric cross-reference data, and practical design notes for the FS32K144WAT0WLFT not found in the bare manufacturer datasheet.

RFQ संपर्क
FS32K148HAT0MLLT - S32K148 Arm Cortex-M4F 80MHz MCU | NXP
FS32K148HAT0MLLT

FS32K148HAT0MLLT - S32K148 Arm Cortex-M4F 80MHz MCU | NXP

The NXP Semiconductors FS32K148HAT0MLLT is an automotive-grade 32-bit Arm Cortex-M4F microcontroller from the S32K1 family, featuring a 2 MB flash program memory, 256 KB SRAM, and an 80 MHz CPU core. It is housed in a 100-pin LQFP (14x14 mm) package qualified to the AEC-Q100 standard for body electronics and gateway applications. The device integrates dual CAN FD controllers, FlexIO, Ethernet MAC, and hardware cryptographic acceleration (CSEc) for ASIL-B functional safety use cases. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The S32K1 family specifically targets automotive and high-reliability industrial applications, so each member must combine deterministic real-time response with low-power operating modes and functional-safety features. As part of the S32K1 platform, the FS32K148HAT0MLLT positions itself between the lower-pin S32K11x and the high-pin S32K14x variants for body domain controllers, gateway ECUs, and industrial control units. Key features of this part include 2 MB (2M x 8) flash with ECC, 4 KB EEPROM emulation area, 32 channels of 12-bit SAR ADC and one 8-bit DAC, an internal oscillator, and an operating voltage range of 2.7 V to 5.5 V. Cryptographic services, secure boot, and HSE firmware are provided by the on-chip CSEc security engine, and the FlexIO peripheral can emulate additional serial interfaces. The LQFP-100 footprint offers generous ground and power pins for clean analog performance in mixed-signal designs. The Cortex-M4F core includes a single-precision FPU, DSP extensions, and a Memory Protection Unit (MPU). Combined with the tightly-coupled peripheral crossbar, this allows deterministic interrupt latency for time-critical automotive control loops. Peripherals such as FlexCAN, FlexIO, LIN, and Ethernet are wired through NXP's configurable peripheral trigger router for flexible DMA-driven I/O. Typical applications include automotive body controllers, gateway ECUs, sensor fusion nodes, industrial PLCs, and motor-control driver boards. The 2 MB flash supports large AUTOSAR applications and over-the-air (OTA) staging partitions, while the ASIL-B hardware decomposition makes it a frequent choice for chassis and powertrain subsystems. When designing with this MCU, allocate generous decoupling on every VDD/VSS pair and follow NXP S32K1 reference manual recommendations for HSE secure boot provisioning. Pin compatibility with S32K146 and S32K144 in LQFP-100 enables smooth migration along the family without PCB rework. This page synthesizes distributor pricing, pin-compatible S32K family drop-ins, and design notes that go beyond the manufacturer datasheet to support faster sourcing decisions for automotive and industrial programs.

RFQ संपर्क
FX32K144HAT0MLLT - S32K144 80MHz ARM Cortex-M4F MCU 512KB | NXP
FX32K144HAT0MLLT

FX32K144HAT0MLLT - S32K144 80MHz ARM Cortex-M4F MCU 512KB | NXP

The NXP FX32K144HAT0MLLT is an ARM Cortex-M4F 32-bit automotive microcontroller from the S32K1 family, operating at up to 80 MHz with 512 KB of Flash and housed in a 100-pin LQFP (14x14 mm) package. According to DigiKey and NXP product pages, this MCU integrates FlexCAN, DSPI, LIN, and FlexIO connectivity, hardware security via CSEc, and functional-safety features compliant with ISO 26262 up to ASIL B for secure vehicle networking and body-control applications. An automotive microcontroller (MCU) is a specialized microprocessor designed for in-vehicle electronic systems, integrating the CPU core, Flash, SRAM, analog peripherals, and communication interfaces on a single die to meet the strict reliability, temperature, and functional-safety requirements of the automotive industry. Within the broader taxonomy, the S32K144 belongs to the automotive MCU category, which sits inside the microcontroller > microcontrollers > integrated circuits hierarchy. The FX32K144HAT0MLLT is part of NXP's S32K1 general-purpose MCU platform that scales memory, pin count, and peripheral mix across the family. Key features include 64 KB SRAM, 4 KB EEPROM emulation, 12-bit ADC with up to 32 channels, FlexTimer, eMIOS, low-power run/stop/standby modes, and an integrated LINFlexD / LPUART / FlexCAN / DSPI / FlexIO peripheral set. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V automotive rails directly without bridge trimming. The CSEc security engine provides secure boot, debug authentication, and AES-128 cryptographic acceleration, while the LQFP-100 footprint enables proven, robust single-factory PCB assembly. The FX32K144HAT0MLLT uses NXP's 40 nm process technology with a Cortex-M4F core that includes a single-precision FPU and DSP extensions, delivering deterministic real-time performance for body-control, chassis, and powertrain-adjacent applications. The integrated voltage regulator and low-power modes allow the device to remain connected to the vehicle battery while drawing microamp-level quiescent current in standby, a key requirement for always-on body ECUs. Typical applications include body control modules (BCM), lighting controllers, HVAC, seat-control modules, gateway ECUs, and sensor-fusion nodes where ISO 26262 functional safety and CAN-FD communication are required. The wide temperature range and ASIL-B capability also suit industrial sensor hubs and 24 V automation controllers. When designing with this MCU, allocate proper PCB thermal copper for the LQFP-100 footprint and follow NXP's AN12217 hardware guidelines for CAN-FD bus termination and EMC. Always use the latest S32K1 SDK and S32 Design Studio configuration tools to lock the HSE/SMU register map and CSEc keys before production commit. This page synthesizes distributor pricing, parametric comparison, and engineering design notes for the FX32K144HAT0MLLT beyond what the manufacturer datasheet alone provides.

RFQ संपर्क
G9S12GN32F1VLCR - 16-bit S12G MCU, 32KB Flash, CAN/LIN | NXP
G9S12GN32F1VLCR

G9S12GN32F1VLCR - 16-bit S12G MCU, 32KB Flash, CAN/LIN | NXP

The NXP G9S12GN32F1VLCR is a 16-bit HCS12-based automotive microcontroller from the S12G family, integrating 32KB Flash and 2KB RAM in a 32-pin LQFP package. Built around the S12 CPU core with a bus frequency of up to 25 MHz, the device targets cost-sensitive automotive body and chassis applications while providing hardware CAN and LIN/SAE J2602 communication peripherals. The part ships in LQFP-32 surface-mount packaging with MSL-3 moisture sensitivity and Sn (tin) matte terminal finish per JESD-609 e3. Background: An automotive microcontroller is an MCU optimized for in-vehicle electronics. The S12G family is positioned below higher-tier S12XE/S12XS devices but above 8-bit HC08/HCS08 parts, balancing performance, peripheral integration, and unit cost. Within the broader taxonomy, an MCU is a programmable processor that combines CPU, memory, and I/O peripherals on a single die; the S12G specifically uses the HCS12 instruction set with BDM (Background Debug Mode) for non-intrusive in-circuit debug, which remains standard in many OEM automotive toolchains. Key features of the G9S12GN32F1VLCR include 32KB on-chip Flash, 2KB SRAM, hardware CAN 2.0A/B controller, LIN 2.x/SAE J2602 master/slave support, an enhanced capture timer (ECT), an 8-channel 10-bit ADC, and a multi-channel PWM module suitable for motor and LED control. Internal EEPROM emulation is supported through the Flash EEPROM module, and the device includes low-power stop and pseudo-stop modes for quiescent-current-sensitive body modules such as seat controllers, mirror switches, and ambient lighting. Architecture: The S12G core is a 16-bit CISC processor with a 16-bit ALU, 16-bit index registers, and a 16-bit program counter, executing the HCS12 instruction set. The 32KB Flash is organized as a single 32K x 8 array with error-correction and security-lockout features. The 2KB SRAM is split into two banks for use as back-up RAM during stop mode, allowing CAN/LIN wake-up events to retain context. The CAN module (CAN0) is Bosch C_CAN-compatible, supporting standard 11-bit and extended 29-bit identifiers, while the LIN/J2602 physical layer is implemented via the SCI serial interface plus an external LIN transceiver. Typical applications include CAN-controlled body control modules, LIN slave nodes such as seat-position switches, HVAC damper actuators, lighting ECUs, instrument clusters, and small industrial sensor-interface nodes. The combination of small footprint, on-chip CAN/LIN, and automotive qualification makes the part well-suited to node-count-heavy vehicle networks where BOM cost per node is paramount. Design considerations: The G9S12GN32F1VLCR is rated for peak reflow at 260 C for 40 s maximum per IPC JEDEC J-STD-020, with moisture sensitivity level 3 (MSL-3). The LQFP-32 footprint requires no PCB redesign relative to the rest of the S12G LQFP-32 family, enabling reuse of layout resources across derivative SKUs with different memory sizes. This page synthesizes distributor pricing, drop-in alternatives within the S12G family, and practical design notes that are not consolidated in the manufacturer datasheet alone.

RFQ संपर्क
GD32F105VCT6 - 108MHz Cortex-M3 MCU 256KB Flash LQFP-100
GD32F105VCT6

GD32F105VCT6 - 108MHz Cortex-M3 MCU 256KB Flash LQFP-100

The GigaDevice GD32F105VCT6 is a 32-bit ARM Cortex-M3 microcontroller running up to 108 MHz with zero-wait-state Flash access, 256 KB on-chip Flash and 64 KB SRAM, housed in a 100-pin LQFP package. It integrates USB 2.0 Full-Speed OTG, two 12-bit ADCs (1 MSPS), two 12-bit DACs, and a rich set of peripherals (USART, SPI, I2C, CAN, timers) for cost-sensitive embedded designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, working memory, and I/O peripherals on a single silicon die. Within the semiconductor taxonomy, the GD32F105VCT6 sits at the hierarchy Microcontroller -> 32-bit MCU -> ARM Cortex-M3 MCU -> mainstream MCU -> GigaDevice GD32 family. It is designed as a drop-in upgrade path for STM32F103-class designs while adding USB OTG that STM32F103 lacks. Key features include 108 MHz max CPU clock with single-cycle multiply and hardware divide, a 12-bit ADC with up to 16 channels and 1 MSPS conversion rate, two 12-bit DAC channels, three general-purpose 16-bit timers plus one PWM timer, two USARTs plus two UARTs, two SPIs, two I2Cs, one USB FS OTG, one CAN 2.0B, and an operating voltage range of 2.6V to 3.6V. The device also supports external interrupts on all GPIO pins and a 7-channel DMA controller. The GD32F105VCT6 uses a 3-stage pipelined Cortex-M3 core with Thumb-2 instruction set, delivering 1.25 DMIPS/MHz (90 DMIPS at 72 MHz equivalent). Flash controller prefetch and 64-bit-wide Flash access deliver up to 50% higher CoreMark scores than competing Cortex-M3 parts at the same clock, making it well suited to real-time control loops, USB peripherals, and motor-control firmware. Typical applications include USB HID/CDC peripherals, industrial control boards, smart home gateways, motor drive controllers, consumer appliances, and cost-optimized IoT nodes. The LQFP-100 footprint matches the STM32F105/F103 100-pin layout, enabling reuse of existing PCB designs. When designing with this device, ensure the external 8 MHz HSE crystal is selected to drive the 108 MHz PLL; for USB applications a 48 MHz clock-accurate source is required. Decouple VDD/VDDA pins with 100 nF ceramics close to each pin and provide a 4.7 uF bulk capacitor for ADC noise suppression. This page synthesizes distributor pricing from LCSC and Pacific Component Xchange, drop-in alternatives from the STM32F103/F105 family, and practical design notes not consolidated in any single manufacturer document.

RFQ संपर्क
GD32F407ZET6 - 168MHz Cortex-M4 MCU 512KB Flash | GigaDevice
GD32F407ZET6

GD32F407ZET6 - 168MHz Cortex-M4 MCU 512KB Flash | GigaDevice

The GigaDevice GD32F407ZET6 is a 32-bit high-performance microcontroller based on the Arm Cortex-M4 core operating at 168 MHz, with 512 KB on-chip Flash and 192 KB SRAM, housed in a 144-pin LQFP package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die. Within the power-management and embedded-systems hierarchy, an MCU sits above discrete logic and below application processors, executing real-time control and connectivity tasks. The GD32F407 belongs to GigaDevice's GD32F4xx high-performance MCU series, a family positioned as a cost-effective, supply-secure alternative in the mainstream Cortex-M4 segment. Key features include up to three 12-bit 2.6 MSPS ADCs and two 12-bit DACs for precision analog acquisition, on-chip Ethernet MAC for industrial networking, USB HS/FS OTG for device and host modes, and CAN 2.0B for automotive and industrial fieldbus links. The core achieves Flash zero-wait-state access for maximum execution efficiency, and the peripheral set connects through two APB buses for deterministic I/O timing. Architecturally, the GD32F407xx integrates the Arm Cortex-M4 processor with its DSP and floating-point instruction extensions, enabling single-cycle MAC and hardware FPU for control-loop mathematics. Peripherals are routed through a multi-layer bus matrix that reduces arbitration contention between the core, DMA controllers, and high-bandwidth interfaces such as Ethernet and USB. Typical applications include industrial automation controllers, IoT gateways and connectivity nodes, motor drives, and communication equipment, where the combination of 168 MHz throughput, hardware Ethernet, and rich analog peripherals replaces discrete ADC and communication chips. Design consideration: apply decoupling capacitors at every VDD pin pair, and verify Flash wait-state configuration when operating the core at the full 168 MHz from the internal RC or external crystal clock source. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ संपर्क
HC32L031 - 48MHz Cortex-M0+ 64KB Flash MCU | XHSC (小华)
HC32L031

HC32L031 - 48MHz Cortex-M0+ 64KB Flash MCU | XHSC (小华)

The XHSC (小华半导体) HC32L031 is a 32-bit ultra-low-power microcontroller based on the Arm Cortex-M0+ core running up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in compact LQFP-32 and QFN-32 (4x4 mm) packages. It operates from a wide 1.8 V to 5.5 V supply, making it suitable for both battery-powered and industrial 5 V rails. A low-dropout (LDO) linear regulator is an analog integrated circuit that maintains a tightly regulated output voltage even when the input-to-output voltage difference is small (the dropout voltage). LDOs belong to the broader family of linear regulators, which in turn are a subset of voltage regulators and power management ICs used in virtually every powered electronic system. The HC32L031 sits one level above: it is a microcontroller that *uses* internal LDOs to power its core and analog domains from a single external supply. Key differentiating features include a deeply engineered power management system with 0.65 µA Deep-Sleep current (all clocks off, IO retention, IO interrupt wake-up, full RAM/CPU state retention) and 45 µA/MHz active current at 3 V / 48 MHz with peripherals off. The device includes multiple low-power modes, an integrated LDO regulator, and Brown-Out Reset (BOR). Peripheral highlights include a 12-bit SAR ADC, multiple timers, UART, SPI, I²C, and an integrated LCD segment driver (variant dependent), making it highly competitive in metering and HMI applications. Architecturally, the HC32L031 leverages the Cortex-M0+ core (Thumb-2 instruction set, single-cycle IO) and pairs it with a high-efficiency on-chip voltage regulator to minimize dynamic power. The Flash is organized with erase/write protection to support secure in-field firmware updates. Typical applications include battery-powered IoT sensors, smart water/gas/heat meters, wearable health devices, low-power wireless sensor nodes, BLE/Zigbee beacon peripherals, electronic shelf labels, and consumer appliances requiring always-on sensing with multi-year battery life. Its wide 1.8 V–5.5 V input range also suits industrial 5 V control boards. When designing with the HC32L031, select the package variant (LQFP-32 F8TB or QFN-32 F8UB) that matches your PCB footprint and thermal target. Pay attention to decoupling: place 100 nF + 4.7 µF ceramic capacitors close to VDD/VSS pins to keep the internal LDO stable during load transients. This page synthesizes distributor pricing, package variants, drop-in alternatives, and practical design notes not consolidated in any single manufacturer datasheet, providing actionable engineering value for selection and procurement.

RFQ संपर्क
HD4074818FS - 4-Bit OTP Microcontroller with LCD Driver | Renesas
HD4074818FS

HD4074818FS - 4-Bit OTP Microcontroller with LCD Driver | Renesas

The Renesas HD4074818FS is a 4-bit single-chip microcomputer with on-chip OTPROM, an integrated 16-digit LCD driver/controller, an analog voltage comparator, and a 32 kHz watch oscillator circuit, packaged in an 81-pin QFP (FS suffix). It is part of the legacy HD407xxxx OTPROM family originally developed by Hitachi Semiconductor and now maintained by Renesas Electronics following the merger of Hitachi's and Mitsubishi's semiconductor operations. A 4-bit microcontroller (4-bit MCU) is a class of single-chip microcomputer whose central processing unit operates on 4-bit data words, with typical 8-bit or 16-bit internal addressing. These MCUs were widely adopted in the 1990s and early 2000s for cost-sensitive, low-power, embedded control tasks where 4-bit arithmetic precision was sufficient - household appliances, remote controls, calculators, electronic meters, simple LCD-display appliances, and consumer white goods. In the modern semiconductor taxonomy, the 4-bit MCU is a hypernym under microcontroller (MCU), then embedded processor, then integrated circuit. The HD4074818FS is differentiated by its integrated 16-digit LCD driver, which eliminates the need for an external LCD controller chip in many small-format display products. Key features of the HD4074818FS include: an OTPROM program memory for one-time field programmability, integrated LCD segment driver supporting up to 16 digits, an on-chip voltage comparator for analog signal conditioning, a 32 kHz watch oscillator for low-power real-time-clock (RTC) operation, and multiple I/O ports. The FS suffix denotes the QFP package, which provides a large pin count suitable for the LCD segment outputs and parallel I/O. The device operates from a single low-voltage supply and is engineered for ultra-low standby current consumption. Architecturally, the HD4074818FS combines a 4-bit ALU core with dedicated LCD-driver hardware, a 32 kHz crystal oscillator for timekeeping, and analog comparator peripherals. This single-chip integration reduces BOM cost and PCB footprint in products that previously required a separate MCU, LCD driver IC, and comparator IC. The OTPROM program memory allows late-stage customization of firmware after the silicon is fabricated, which was a key advantage over mask-ROM 4-bit MCUs of the same era. Typical applications include: home appliance controllers (rice cookers, microwave ovens, washing machines), electronic thermostats, water heaters, simple digital scales, remote control units with LCD displays, and battery-powered consumer devices requiring a low-cost LCD readout. Designers should note that this part belongs to a mature legacy family - verify current lifecycle status and long-term supply before committing to a new design. The 81-pin QFP package requires careful PCB layout for reliable soldering. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives, and practical design notes not consolidated in any single manufacturer datasheet.

RFQ संपर्क
HD6417750RF240 - SH7750R 240MHz SuperH RISC MCU | Renesas
HD6417750RF240

HD6417750RF240 - SH7750R 240MHz SuperH RISC MCU | Renesas

The Renesas HD6417750RF240 is a 32-bit SuperH RISC (SH-4) microprocessor (MPU) running at 240 MHz, supplied in a 208-pin PQFP package with a 1.4 V to 1.6 V core supply and a 3.0 V to 3.6 V I/O supply, providing ROMless operation with 48K x 8 of on-chip RAM. A microprocessor (MPU) is a VLSI central processing unit on a single chip that integrates the CPU core, caches, MMU, bus interfaces, and peripheral controllers. The SH7750R belongs to the SuperH family: a RISC microprocessor architecture -> 32-bit RISC processor -> embedded microprocessor -> system-on-chip class MPU -> semiconductor IC. This taxonomy situates the HD6417750RF240 within the broader processor hierarchy that scales up to application processors for desktops and down to microcontrollers for deeply embedded sensing. Key features include a 240 MHz CPU clock with object-code upward compatibility from SH-1, SH-2, and SH-3, 16 KB instruction cache, 32 KB data cache (32 KB unified in SH-4), an integrated MMU with 4-way set-associative TLB, a single-precision IEEE-754 floating-point unit, a 16-bit unified instruction set, and a 32-bit external bus interface supporting SDRAM, SRAM, ROM, and PCMCIA. The 208-pin PQFP (28 mm x 28 mm) package offers a familiar through-hole-style lead footprint suitable for legacy industrial designs and evaluation boards. The HD6417750R architecture combines a Harvard-style cache hierarchy with a unified external bus, enabling high-throughput data movement for embedded computing workloads such as real-time control, machine vision front-ends, and high-resolution graphical HMI. The integrated FPU and MMU allow full Linux and Windows CE operating-system support, which is rare among 32-bit embedded MPUs of this generation. Typical applications include industrial machine controllers, factory automation HMIs, in-vehicle infotainment prototypes, network-attached print/image processing engines, point-of-sale terminals, and legacy SH-4 upgrade boards. The 240 MHz performance is well matched to QVGA/VGA-resolution graphics and MPEG-2 decode. When designing with the HD6417750RF240, pay close attention to the dual-voltage power tree (1.5 V core, 3.3 V I/O), the SDRAM interface timing, and bus-arbiter configuration for any DMAC peripherals. Refer to the Renesas SH7750R hardware manual for PLL loop filter components and reset sequencing. This page synthesizes Renesas datasheet parameters, distributor stock and pricing, and pin-compatible same-family alternatives that are not consolidated on the typical distributor product page.

RFQ संपर्क
HD6417750RX240V - SH-4 240MHz 32-Bit MPU, 208-QFP | Renesas
HD6417750RX240V

HD6417750RX240V - SH-4 240MHz 32-Bit MPU, 208-QFP | Renesas

The Renesas HD6417750RX240V is a 32-bit SH-4 (SuperH) RISC microprocessor running at 240 MHz in a 208-pin LQFP package with a 3.3 V I/O supply, ROMless architecture, and Pb-free lead finish. An MPU (Microprocessor Unit) in this category is a 32-bit superscalar RISC core that executes the SuperH instruction set and connects to external SDRAM, SRAM, and ROM through an external bus interface. The HD6417750RX240V belongs to the SH7750 family and sits at the top of the embedded processing hierarchy between microcontroller units (MCU) and full application processors, with explicit multimedia (MMU, cache, FPU) extensions. SH-4 cores have been used in set-top boxes, printers, industrial control, and automotive infotainment where deterministic 32-bit performance exceeds what 8/16-bit controllers can deliver. Key features of the HD6417750RX240V include a 240 MHz CPU clock, an integrated FPU, separate 16 KB instruction and 8 KB data caches, an MMU with TLB, and an external bus interface supporting SDRAM, PCMCIA, and burst ROM. The 208-pin LQFP package exposes all of these signals plus serial, USB, and timer peripherals, allowing a compact PCB layout without BGA complexity. The architecture combines a dual-issue superscalar pipeline with a Harvard-style cache structure, achieving roughly 360 MIPS / 1.4 GFLOPS sustained throughput at 240 MHz. On-chip peripherals include DMA, SCI (UART), timers, and a PCMCIA controller, which is unusual for embedded MPUs of this class. The part is fabricated in a low-power CMOS process that lets designers hold the core in software-controlled standby while keeping external bus monitoring active. Typical applications include industrial machine controllers, point-of-sale terminals, set-top box media decoders, and OEM printer/copier controllers. The 240 MHz speed and FPU make it well suited for JPEG/MPEG-1 software codecs and for the control loops in office imaging equipment. When designing with this part, remember that it is ROMless - boot firmware must reside in external flash or ROM. Provide a PLL loop filter network per the hardware manual and observe the 3.3 V supply tolerance (typically +/-5%) to keep the PLL locked across temperature. The LQFP package simplifies rework versus BGAs in legacy industrial designs. This page synthesizes distributor pricing, same-family SH-4 drop-in alternatives, and practical design notes not assembled in the manufacturer datasheet alone.

RFQ संपर्क
HD6417750SX167V - 167MHz SH-4 32-Bit Microprocessor | Renesas
HD6417750SX167V

HD6417750SX167V - 167MHz SH-4 32-Bit Microprocessor | Renesas

The Renesas HD6417750SX167V is a 32-bit RISC microprocessor based on the SuperH SH-4 (SH7750) core, clocked at 167 MHz and packaged in a 208-pin LQFP (S-V) form factor with ROMless architecture. As part of the SuperH family, it integrates a 32-bit single-core SH-4 CPU with on-chip FPU, 32 KB instruction cache, 32 KB data cache, and a sophisticated bus state controller (BSC) capable of glueless external memory interfacing. The device targets embedded applications requiring high processing throughput with low power consumption in industrial, office automation, and networking equipment. An SH-4 SuperH microprocessor belongs to the superscalar RISC CPU family originally developed by Hitachi and now maintained by Renesas Electronics Corporation. The SH-4 instruction set extends the earlier SH-1/SH-2 ISA with 16-bit fixed-length instructions and adds a 128-bit media extension (SIMD-style) for multimedia and DSP-style workloads. Within the broader semiconductor taxonomy, the SH7750 sits in the hierarchy: SH-4 core -> SuperH family -> 32-bit RISC microcontroller -> embedded processor -> semiconductor IC. The ROMless designation means the chip executes code from external NOR flash, SRAM, or SDRAM, providing maximum firmware flexibility for long-lifecycle industrial designs. Key differentiating features include 167 MHz sustained core frequency, hardware IEEE 754 single-precision floating-point unit, integrated memory management unit (MMU) supporting virtual memory, separate 32 KB instruction and 32 KB data caches with write-back policy, and a peripheral set encompassing DMAC, timer, SCI, and a powerful 32-bit external bus. The on-chip FPU executes single-precision floating-point in one cycle for SIMD instructions and supports vector arithmetic. With five-stage pipeline architecture and dual-issue superscalar dispatch, the SH-4 delivers up to 360 MIPS / 1.4 GFLOPS peak throughput, enabling real-time video, audio, and control processing without external co-processors. Typical applications include industrial machine controllers, networked printers, multifunction office imaging systems, set-top box controllers, point-of-sale terminals, and embedded HMI panels. The wide 32-bit external bus and SDRAM controller support high-bandwidth data movement required for image scanning and printing pipelines. The integrated MMU enables full Linux and Windows CE operating system support, opening the device to open-software stacks used in commercial embedded products. When designing with this part, allocate sufficient PCB area for the 208-pin LQFP and ensure the external memory bus traces are length-matched for SDRAM operation above 100 MHz. The device requires a 3.3 V I/O supply and a separate core voltage rail; decoupling must follow Renesas reference layout for stable PLL lock. This page synthesizes distributor stock, drop-in alternatives from the SH7750 family, and practical design notes not consolidated in the manufacturer datasheet alone.

RFQ संपर्क
HD64F3687GFPV - H8/300H 16-bit MCU, 56KB Flash, 20MHz | Renesas
HD64F3687GFPV

HD64F3687GFPV - H8/300H 16-bit MCU, 56KB Flash, 20MHz | Renesas

The Renesas HD64F3687GFPV is a 16-bit single-chip microcontroller belonging to the H8/300H Tiny Series of the H8/3687 Group, integrating a high-performance H8/300H CPU core with 56KB of on-chip Flash memory and packaged in a 64-pin LQFP (10x10 mm, 0.5 mm pitch). It operates from a 4V to 5.5V supply and runs up to 20 MHz, offering 53 I/O pins for moderate-complexity embedded designs. What is an H8/300H microcontroller? The H8/300H is Renesas' enhanced 16-bit CISC CPU family, upward-object-code-compatible with the original H8/300 while adding a wider 16-bit register file and richer addressing modes. Tiny-Series derivatives such as the H8/3687 Group position this MCU in the hierarchy: H8 family -> H8/300 CPU -> H8/300H Tiny -> H8/3687 Group, used as mainstream microcontrollers -> embedded systems -> semiconductor ICs. The Flash variant (-F suffix) integrates user-programmable Flash memory suitable for prototyping and field-upgradable production firmware. Key features include on-chip Flash program memory, RAM, multiple timers (16-bit and 8-bit), a watchdog timer, and serial interfaces including SCI (asynchronous/synchronous) and I2C bus. The H8/300H core executes most instructions in 2 to 4 states at 20 MHz, achieving roughly 5 to 10 MIPS sustained throughput. The 64-LQFP package exposes a wide parallel I/O bus and dedicated peripheral pins, enabling direct LED/segment-LCD driving, motor control PWM, and external memory interfacing when required. Typical applications include white-goods motor control (washing machines, air conditioners), consumer appliance key-scan user interfaces, industrial sensor signal conditioning, and small home appliances requiring deterministic real-time control. The integrated timers and SCI/I2C allow direct connection to sensors, inverters, and operator panels without external glue logic. When designing with this device, follow the H8/3687 Group hardware manual for unused-pin handling (tie all unused CMOS inputs to VCC or GND to prevent pass-through current). Designers migrating from earlier H8/300 parts benefit from object-level upward compatibility for firmware reuse.

RFQ संपर्क
HT45F0074A - Half-Bridge Induction Cooker Flash MCU | Holtek
HT45F0074A

HT45F0074A - Half-Bridge Induction Cooker Flash MCU | Holtek

The Holtek HT45F0074A is a Flash Memory type 8-bit high-performance RISC architecture microcontroller specially designed for half-bridge induction cooker applications, delivered in a 24-pin SOP (24SOP) surface-mount package. It integrates complementary PWM outputs with adjustable dead-time insertion, an 11-channel 12-bit A/D converter with 2-channel automatic conversion, SPI/I2C/UART serial interfaces, nine groups of over-voltage protection, and a programmable-gain internal operational amplifier. An induction cooker control MCU is an application-specific standard product (ASSP) that sits at the top of the power-appliance control hierarchy: below general-purpose 8-bit MCUs, it adds dedicated analog front-ends and power-control state machines so a single chip can manage resonant half-bridge power stages, user interfaces, and safety monitoring without external comparators or amplifiers. Key differentiating features include the complete hardware protection mechanism covering over-current, surge, and phase-loss conditions, nine programmable over-voltage protection groups (upgraded from seven in the earlier HT45F0074), and complementary PWM outputs with hardware dead-time insertion that directly drive half-bridge gate control. The 12-bit ADC with 2-channel automatic conversion mode continuously samples current and voltage feedback without CPU intervention, freeing processing bandwidth for control loops and user interface tasks. Architecturally, the device uses Holtek's high-performance 8-bit RISC core with Flash program memory, combining fast instruction execution with in-system reprogrammability for production flexibility. The integrated programmable-gain operational amplifier conditions current-sense signals internally, reducing external component count and board area in cost-sensitive appliance designs. Typical applications include 3500W-class half-bridge induction cooker main control (Holtek's official reference design uses this exact chip), other resonant power-control appliances, and induction heating systems requiring hardware-level protection. The SPI/I2C/UART interfaces support display panels, touch keys, and external EEPROM. Design consideration: because the HT45F0074A has been placed on End-of-Life (latest purchase date May 24, 2026, per Holtek EOL notification), new designs should evaluate the Holtek-designated replacement device or design in the HT45F0074 only for service continuity. This page synthesizes verified web data, the Holtek EOL cross-reference, and drop-in alternative analysis not found on the manufacturer product page.

RFQ संपर्क
HT45F8640 - 8-bit BMS Flash MCU, 3-7 Cell Li-ion | Holtek
HT45F8640

HT45F8640 - 8-bit BMS Flash MCU, 3-7 Cell Li-ion | Holtek

The Holtek Semiconductor HT45F8640 is an 8-bit Flash A/D type BMS (Battery Management System) microcontroller with an integrated accumulative cell voltage monitor module, designed specifically for 3 to 7 cell Li-ion rechargeable battery protection applications. It supports a maximum input voltage of 36V, integrates 4KB of Flash program memory and 256B of RAM data memory, and is housed in a 28-pin SSOP-A package. A BMS microcontroller is a specialized type of 8-bit microcontroller unit within the power management IC hierarchy, combining an MCU core with dedicated battery-monitoring analog front-end circuitry. Unlike general-purpose MCUs, BMS devices such as the HT45F8640 integrate cell voltage monitoring, protection FET gate drivers, and high-voltage tolerant front ends, reducing external component count in battery pack designs. Key features include the accumulative cell voltage monitor, which measures an accumulative voltage from cell 1 to cell N and outputs a divide-by-N voltage through an analog multiplexer with ±0.5% accuracy. Integrated discharge and charge N-type MOSFET gate drivers eliminate external gate-drive ICs, while a high accuracy voltage regulator powers the core from the high-voltage pack rail. The device also provides a multi-channel ADC (up to 5 channels) and true EEPROM for storing calibration data and serial numbers. Architecturally, the HT45F8640 is based on Holtek's high-performance 8-bit RISC core with Flash multi-programming capability, enabling field firmware updates. The dedicated analog modules are tightly coupled to the core, allowing fast protection loops for overcharge and overdischarge conditions. Typical applications include 3S to 7S Li-ion battery packs for power tools, e-bikes, portable medical devices, and backup power systems, where integrated cell monitoring and FET drive reduce BOM cost. Design consideration: plan your end-of-life strategy now - Holtek has issued a formal EOL notification for the HT45F8640/HT45F8650, with the last purchase date of October 07, 2026. This page synthesizes the EOL notification, drop-in family alternatives, and design guidance not found on standard distributor pages.

RFQ संपर्क
HT45F8650 - 8-Bit Li-Battery Protection Flash MCU | Holtek
HT45F8650

HT45F8650 - 8-Bit Li-Battery Protection Flash MCU | Holtek

The Holtek Semiconductor HT45F8650 is an 8-bit BMS (Battery Management System) Flash microcontroller with an integrated accumulative cell voltage monitor, designed specifically for 3 to 8 cell Li-ion rechargeable battery protection in a 48-pin LQFP-EP package. It integrates a multi-channel 12-bit A/D converter, a comparator, a high-accuracy voltage regulator, and dedicated Li-ion battery protection functions including two discharge N-type MOSFET gate drivers and one charge N-type MOSFET gate driver. A battery management MCU is a class of embedded controller that combines battery-specific analog front-end functions with a general-purpose processor core, sitting within the hierarchy of 8-bit Flash MCUs used in power management and battery protection integrated circuits. The accumulative cell voltage monitor outputs a divide-by-N voltage of the stacked cells to the analog multiplexer with a ±0.5% divided ratio accuracy, which is then digitized by the internal 12-bit ADC. Key features include up to 36V maximum input voltage tolerance, 8KB of Flash program memory, 512 bytes of RAM data memory, and True EEPROM for storing serial numbers and calibration data. Flash multiple-program capability simplifies firmware iteration, while the integrated MOSFET gate drivers eliminate external driver ICs and reduce bill-of-materials cost. Architecturally, the device uses Holtek's high-performance 8-bit RISC core with multiple flexible Timer Modules providing timing, pulse generation, and PWM output functions. Complete SPI, I2C, and UART interfaces allow straightforward communication with external hardware such as fuel gauges, displays, or host controllers. Typical applications include handheld measurement instruments, electric power tools, handheld hair dryers, and handheld vacuum cleaners - portable battery-powered products where accurate cell monitoring and reliable charge/discharge protection are mandatory safety requirements. A key design consideration is that the OCP (over-current protection) circuit power source can be selected between a general I/O pin and VDD (5V); pins such as PA0 and PA3 may host two coexisting functions but cannot use both simultaneously, so pin assignment must be planned early. This page synthesizes verified datasheet excerpts, distributor pricing context, same-family drop-in options, and practical BMS design notes not found together on the manufacturer site.

RFQ संपर्क
HT66F25D - A/D Flash 8-bit MCU with EEPROM | Holtek
HT66F25D

HT66F25D - A/D Flash 8-bit MCU with EEPROM | Holtek

The Holtek HT66F25D is an A/D Flash type 8-bit MCU with EEPROM, built on a high-performance RISC architecture, supplied in an SOP small-outline package. It belongs to Holtek's enhanced Flash MCU family that integrates an analog-to-digital converter, non-volatile EEPROM data memory, and a high-current LED driver output structure on a single chip, allowing multi-programming convenience thanks to its Flash program memory. An 8-bit Flash microcontroller is a complete computing system on a single integrated circuit: it combines a processor core, program Flash memory, data RAM, EEPROM, peripheral functions such as timers, PWM and ADC channels, and general-purpose I/O. Within the semiconductor hierarchy, the HT66F25D sits in the microcontroller -> embedded processor -> integrated circuit taxonomy, positioned for cost-sensitive embedded control where on-chip analog input and small non-volatile data storage remove the need for external components. Key differentiating features of this device, as stated by Holtek and the datasheet aggregators carrying the official document, include the Flash program memory with multi-programming support (enabling in-circuit update during development and production), the integrated A/D converter for reading analog sensors directly, the on-chip EEPROM for calibration data and user settings that must survive power cycles, and the enhanced high-current LED driver capability highlighted in Holtek's product notification for the HT66F24D/HT66F25D family. Architecturally, the device follows Holtek's RISC-style 8-bit core used across the HT66Fx1D series, with register-mapped I/O ports (PA, PB, PC with individual pull-up and wake-up control bits per the datasheet register lists), typical of the family's low-cost, low-pin-count embedded control philosophy. The exact clock frequency range, ADC resolution, Flash and RAM capacities are detailed in the 175-page official datasheet and should be confirmed there for each specific suffix. Typical applications include small appliance control, LED lighting and brightness control exploiting the high-current driver outputs, battery chargers, sensor interfaces using the A/D converter, and consumer products requiring configuration storage in EEPROM. A key design consideration: this device has been formally phased out by Holtek. According to the official Holtek EOL notification PDF, the last time buy date was April 14, 2026, so new designs must qualify a replacement immediately. This page synthesizes distributor sourcing data, the official Holtek EOL cross-reference notice, and drop-in replacement analysis not found on standard datasheet aggregator sites.

RFQ संपर्क
HT66FB550 - 8-bit USB Flash MCU, 8KB, LQFP-48 | Holtek
HT66FB550

HT66FB550 - 8-bit USB Flash MCU, 8KB, LQFP-48 | Holtek

The Holtek Semiconductor HT66FB550 is an 8-bit Flash A/D USB microcontroller with a 12-bit ADC, 8KB of Flash program memory, 37 general-purpose I/O lines, an SPI interface, and USB 2.0 Full Speed connectivity, housed in a 48-pin LQFP (7x7 mm) package. An 8-bit microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting within the broader hierarchy of semiconductor devices as: microcontroller -> embedded processor -> integrated circuit. The HT66FB550 belongs to Holtek's A/D Flash USB series, which combines Holtek's high-performance RISC core with direct analog signal interfacing and a USB interface, eliminating the need for a separate USB transceiver chip in many designs. Key features include the USB 2.0 Full Speed device controller (12 Mbps), a 12-bit resolution analog-to-digital converter, 8KB of Flash program memory, an SPI serial interface, and a wide operating voltage range of 2.2V to 5.5V. These specifications make the device well suited to cost-sensitive designs that must digitize analog sensor signals and stream them over USB without a discrete USB bridge. Technically, the HT66FB550 uses Holtek's 8-bit high-performance RISC architecture, common to the HT66FB540, HT66FB550, and HT66FB560 family members, which differ mainly in memory density and pin count. The integrated USB serial interface engine (SIE) handles protocol framing in hardware, reducing firmware overhead and CPU loading compared with bit-banged USB implementations. Typical applications include USB HID devices such as game controllers and keyboards, USB sensor data loggers, battery chargers with USB telemetry, test fixtures, and industrial control panels that interface directly to analog transducers through the 12-bit ADC. When designing with this device, respect the 2.2V to 5.5V supply range and place 0.1uF decoupling capacitors at each VDD pin; the USB full-speed line requires 22-ohm series resistors and careful 90-ohm differential routing on the DP/DM pair. This page synthesizes distributor pricing, drop-in family alternatives, application guidance, and design notes not found in the manufacturer datasheet, offering engineering value beyond a raw specification listing.

RFQ संपर्क
IMC302AF064XUMA1 - iMOTION MCE 2.0 Motor & PFC Controller, 64-LQFP | Infineon
IMC302AF064XUMA1

IMC302AF064XUMA1 - iMOTION MCE 2.0 Motor & PFC Controller, 64-LQFP | Infineon

The Infineon IMC302AF064XUMA1 is an iMOTION dual-core motor and PFC (Power Factor Correction) controller integrating the Motion Control Engine (MCE 2.0) hardware state machine with an additional ARM Cortex-M0 microcontroller, packaged in a 64-pin LQFP. It targets variable-speed drives below 600 V for PMSM and BLDC motors with highly efficient field-oriented control (FOC), sensorless or Hall-based operation, single or leg-shunt current sensing, and configurable protection. The device also integrates a programmable PFC stage, enabling compliance with harmonic standards in appliance and HVAC applications. An iMOTION motor controller is a mixed-signal IC that offloads the time-critical FOC computation from a software MCU into dedicated hardware. This category fits into the broader hierarchy of motor drive semiconductors -> power management ICs -> mixed-signal ICs -> application-specific microcontrollers. By pairing a deterministic motor control engine with a scriptable Cortex-M0 host, iMOTION parts enable engineers to tune motor parameters without writing low-level real-time code, while still leaving room for application-layer scripting and housekeeping. Key features include MCE 2.0 hardware FOC, integrated scriptable ARM Cortex-M0 core, configurable PFC control, sensorless and Hall-based motor support, single/leg-shunt current sensing, 3.3 V or 5 V supply operation, integrated gate drivers for an external PFC and inverter stage, and a configurable protection feature set including overcurrent, overvoltage, and overtemperature. UL/IEC 60730 functional-safety support and a programmable scripting engine round out the device. The 64-LQFP package offers ample pin count for multi-channel shunt sensing, PFC driver outputs, and debug interfaces. Typical applications include white goods (washing machines, refrigerators, dishwashers, air conditioners, fans, pumps), HVAC compressors, and small industrial variable-frequency drives where a compact, energy-efficient BOM is required. The integrated PFC + motor controller shrinks the part count versus discrete solutions, while the MCE 2.0 engine removes the need for a high-performance DSP or Cortex-M4 host MCU. When designing with this device, follow the Infineon iMOTION hardware design guide for power-stage grounding and shunt-resistor layout to minimize current-sense noise. Use the MCE Designer tool to configure the motor parameters and protection thresholds, and the scripting API for application-layer tasks. This page synthesizes distributor pricing, Infineon iMOTION family drop-in alternatives, and practical design notes not consolidated on the manufacturer product page.

RFQ संपर्क
IPQ8072 - Quad-core Wi-Fi 6 SoC, 2.2GHz, Networking Pro 1200 | Qualcomm
IPQ8072

IPQ8072 - Quad-core Wi-Fi 6 SoC, 2.2GHz, Networking Pro 1200 | Qualcomm

The Qualcomm IPQ8072 is a quad-core 64-bit ARM Cortex-A53 networking system-on-chip (SoC) operating up to 2.2 GHz, integrated into Qualcomm's Networking Pro 1200 platform for premium Wi-Fi 6 (802.11ax) routers, gateways, and mesh systems. It supports up to 12 spatial streams across 2.4 GHz, 5 GHz, and 6 GHz bands when paired with QCN9074 or QCN9024 companion radios, delivers up to 5.4 Gbps aggregate PHY rate, and ships in a 772-ball FCBGA package. The die integrates a quad-core CPU subsystem, dual-band MAC/BB blocks, dedicated packet engine hardware, and security acceleration. A Wi-Fi 6 SoC is a system-on-chip that consolidates the application processor, Wi-Fi baseband/MAC, networking offloads, and crypto engines into a single die, replacing what was historically a CPU-plus-discrete-Wi-Fi-chipset architecture. Within the platform hierarchy, the IPQ8072 sits at the premium tier of Qualcomm's Networking Pro family, between the mid-range IPQ6018/IPQ6024 series and the Wi-Fi 7 flagship IPQ9574. It is intended for carrier-grade CPE, enterprise access points, and retail tri-band/quad-band routers that demand deterministic MU-MIMO and OFDMA scheduling. Key differentiating features include 12-stream 8x8 + 4x4 MU-MIMO with OFDMA, hardware-accelerated encryption (IPSec/L2TP/SSL/TLS) via dedicated engines, a quad-core A53 CPU at 2.2 GHz for control plane and SDK extensibility, support for up to 2.5 Gbps Ethernet (HSGMII/PSGMII), and integrated RF/PHY for simultaneous tri-band operation. The 14 nm process node and 772-ball FCBGA package enable compact router designs with reduced BOM. Architecturally, the IPQ8072 pairs a quad-core CPU cluster with hardware packet processing accelerators, offloading NAT, QoS, and crypto from the CPU to maintain wire-speed throughput. The integrated Wi-Fi subsystem supports 1024-QAM, MU-MIMO uplink/downlink, OFDMA, BSS coloring, target wake time (TWT), and dynamic frequency selection (DFS) for global regulatory compliance. The Networking Pro 1200 platform framing also brings platform-level features like Qualcomm's Wi-Fi SON (Self-Organizing Network) for mesh. Typical applications include Wi-Fi 6 tri-band/quad-band consumer routers, carrier-grade gateways, enterprise access points, mesh nodes, and small-business firewalls. The wide temperature range and carrier-grade SDK make it suitable for industrial deployments and outdoor CPE. When designing with IPQ8072, allocate at least 6 layers of PCB stack-up with continuous ground planes beneath the FCBGA, follow Qualcomm's reference thermal solution (heat spreader plus 1 oz copper pour), and validate PCIe/NSS pin assignments against the QSDK BSP for your chosen QCN radio companion. Use M.2 or mPCIe slots to attach QCN9074 5 GHz or 6 GHz radio cards. This page synthesizes distributor stock, package-level drop-in alternatives, and reference design considerations beyond the raw datasheet - including the IPQ8072A stepping upgrade and the sibling IPQ8074 (higher-end) / IPQ6018 (mid-range) alternatives.

RFQ संपर्क
J3455E - Intel Celeron Quad-Core SoC 2.3 GHz 10W Embedded | Intel
J3455E

J3455E - Intel Celeron Quad-Core SoC 2.3 GHz 10W Embedded | Intel

The Intel Celeron J3455E is a quad-core embedded System-on-Chip (SoC) from the Apollo Lake family, featuring 4 cores/4 threads, a 2 MB L2 cache, and a base frequency of 1.50 GHz that bursts up to 2.30 GHz. It integrates Intel HD Graphics 500 with 12 execution units and is manufactured on Intel's 14 nm process with a 10 W TDP, targeting embedded and low-power applications. The term SoC (System-on-Chip) refers to a single silicon die that integrates the CPU cores, GPU, memory controller, and platform I/O (PCIe, SATA, USB) into one package. Apollo Lake SoCs like the J3455E belong to the Atom/Celeron/Pentium Silver hierarchy, which itself sits within Intel's broader embedded and entry-level desktop x86 product stack. By collapsing chipset functions into the same package, Apollo Lake platforms reduce board area, BOM cost, and power envelope compared to discrete CPU-plus-chipset designs of prior generations. Key features of the J3455E include 4 physical cores without Hyper-Threading, a 2 MB shared L2 cache, dual-channel DDR3L/LPDDR3 up to 1866 MT/s and LPDDR4 up to 2400 MT/s memory support, and Intel HD Graphics 500 running up to 750 MHz. I/O includes PCIe 2.0 lanes, SATA 3.0, USB 3.0, and integrated audio. The 10 W scenario design power enables fanless thermal designs, while the 14 nm lithography keeps leakage low for always-on embedded workloads. Architecturally, the J3455E uses Intel's Goldmont CPU microarchitecture, which delivers significantly higher IPC than the prior Braswell/Airmont generation while maintaining the same low-TDP envelope. The integrated HD Graphics 500 (Gen9 LP architecture) supports hardware-accelerated decode for H.265/HEVC and VP9, making the part suitable for digital signage and media playback. The SoC is firmware-configurable for either 6 W or 10 W TDP modes, letting OEMs trade sustained performance against power budget. Typical applications for the J3455E include digital signage players, thin-client terminals, entry-level POS systems, industrial HMI panels, retail kiosks, and fanless embedded boxes. Its low TDP and integrated I/O make it a strong fit where a full desktop CPU is over-spec but ARM-based SoCs lack x86 software compatibility. The part's 10-year embedded lifecycle support also suits long-life industrial designs. When designing with the J3455E, ensure the carrier board implements both PCIe x1 and x2 reference clock routing per Intel's Apollo Lake Platform Design Guide, and use wide copper pours under the SoC package to spread the 10 W dissipation across the PCB. For thermal margin in sealed enclosures, derate the TDP to 6 W via the platform firmware if the chassis cannot sustain 10 W continuously. This page consolidates distributor pricing, embedded lifecycle context, drop-in alternatives, and design notes that supplement the official Intel product page and datasheet references.

RFQ संपर्क
KC9S08QG8CFFE - 8-bit S08QG Microcontroller 8KB Flash | NXP
KC9S08QG8CFFE

KC9S08QG8CFFE - 8-bit S08QG Microcontroller 8KB Flash | NXP

The NXP (formerly Freescale) KC9S08QG8CFFE is an 8-bit HCS08-family microcontroller from the S08QG sub-family, featuring 8KB of on-chip Flash memory, an HCS08 CPU core, and an integrated small-package QG MCU architecture. It is supplied in a 20-pin QFN/QFP-style package (FFE suffix) aimed at space-constrained embedded designs. The device is catalogued by Rochester Electronics as an authorized aftermarket source after the original Freescale/NXP part was discontinued, and it carries the S08QG - 8-BIT SMALL PACKAGE QG M descriptor used across distributor listings. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripheral set into one package. Within the broader hierarchy, the KC9S08QG8CFFE is a low-pin-count 8-bit MCU -> HCS08 family -> S08QG sub-family -> 8-bit microcontroller -> embedded processor -> semiconductor. The HCS08 core uses the S08 instruction set (a superset of the legacy HC05/HCS05 family), enabling object-code reuse from earlier Freescale 5V 8-bit designs. Synonyms frequently seen on datasheets and distributor pages include HCS08 MCU, S08 microcontroller, and QG-series small-package 8-bit MCU. Key features of the KC9S08QG8CFFE include 8KB of Flash program memory, multiple low-power modes for battery-friendly operation, on-chip debug support via the Freescale/NXP background debug mode (BDM), and an integrated peripheral set that typically covers timers, ADC, GPIO, and a serial communications interface (SCI/SPI). The device operates across an industrial temperature range and is designed for cost-sensitive, low-power, low-pin-count embedded applications. The 'KC' prefix designates Rochester Electronics' authorized aftermarket re-stocking of the discontinued Freescale/NXP original part number, ensuring long-term availability for legacy designs. From a technical depth perspective, the S08QG family uses a von Neumann architecture with a 16-bit address space, enabling efficient C and assembly code generation. The Flash memory supports in-application programming (IAP) and in-circuit programming (ICP), which simplifies firmware development and field upgrades. Internal clock sources and PLL options allow flexible system-clock configuration while minimizing external component count, which is critical for the small-package target footprint. Typical applications for this part include small consumer appliances, low-cost remote controls, battery-powered sensor nodes, white-goods user-interface controllers, and replacement/aftermarket boards for industrial equipment originally built around Freescale S08QG designs. The combination of low power, small package, and integrated peripherals makes it well suited to designs where board space, BOM cost, and energy budget matter more than raw CPU throughput. When designing with the KC9S08QG8CFFE, engineers should verify the active lifecycle status with the supplier because the original Freescale/NXP part was moved to End of Life; Rochester Electronics is the primary authorized stock source. Pinout, peripheral mapping, and Flash programming voltages must be cross-checked against the original NXP MC9S08QG8 datasheet family document, which the Rochester part replicates. This page synthesizes distributor pricing snapshots, lifecycle signals, drop-in same-family alternatives, and practical sourcing notes not consolidated in the original NXP datasheet alone.

RFQ संपर्क
KF8TS2714SG - 14KB Flash 8-bit MCU SOIC-20 | ChipON
KF8TS2714SG

KF8TS2714SG - 14KB Flash 8-bit MCU SOIC-20 | ChipON

The ChipON KF8TS2714SG is a high-reliability 8-bit microcontroller based on the proprietary KungFu 8-bit (KF8) core architecture, featuring 14KB of program Flash memory, 14-bit instruction word, and 1024 bytes of SRAM, housed in a 20-pin SOIC (SOIC-20) package for industrial-grade applications. It supports 2.6V to 5.5V single-supply operation, integrates multiple timer/counter/PWM modules, an enhanced capture/compare/PWM peripheral, and 10-bit ADC channels, making it a drop-in member of the KF8TS2714 family designed for cost-sensitive embedded control. An 8-bit microcontroller (8-bit MCU) is a small computer-on-a-chip containing a CPU with an 8-bit data bus, program and data memory, I/O ports, timers, communication peripherals, and interrupt control. The 8-bit MCU sits in the broader taxonomy: microcontroller -> embedded controller -> integrated circuit -> semiconductor. The ChipON KF8 family uses the proprietary KungFu RISC-style core, a position comparable to Microchip PIC or 8051 cores, but with extended 14-bit instruction word and improved peripheral integration. 8-bit MCUs remain a dominant choice for simple, deterministic, real-time control in appliances, industrial sensors, and motor control where cost and code simplicity outweigh throughput. Key features of the KF8TS2714SG include 14KB Flash program memory (8Kx16 organization), 1024 bytes SRAM, integrated 10-bit ADC with multiple channels, enhanced PWM/capture/compare timers, and 2.6V-5.5V wide operating voltage. The part also integrates a high-precision internal oscillator, LVD (low-voltage detection) with selectable thresholds, multiple communication interfaces (UART, SPI, I2C), and on-chip in-system programmable (ISP) Flash for field updates without external programmers. The KF8TS2714 architecture combines a single-cycle KungFu core with a Harvard bus structure, enabling deterministic instruction throughput for real-time control loops. The 14-bit instruction word and 8Kx16 program Flash organization allow dense code packing and faster interrupt service routine execution. The internal 32 kHz low-speed oscillator plus a high-speed configurable oscillator (up to 16 MHz) support flexible clock trees for low-power standby and active processing, while integrated brown-out reset (BOR) and watchdog timer (WDT) harden the part against industrial electrical noise. Typical applications include small home appliances (rice cookers, induction cookers, fans, washing machine sub-modules), industrial sensor interfaces, low-end motor control, LED lighting controllers, and battery management front-ends. The wide 2.6V-5.5V supply range supports both 3.3V and 5V system rails. For high-end motor control, multi-axis drive, or high-speed communication, the designer should consider the KF32A 32-bit MCU family from the same manufacturer. When designing with this device, ensure the decoupling network is sized per the datasheet: a 1uF plus 100nF ceramic pair (often a 105 plus 102) placed as close as possible to the VDD and VSS pins, and avoid negative or transient over-voltage on VDD to prevent LATCH-UP damage. Reserve unused pins as outputs or with internal pull-ups to minimize quiescent current and improve EMI immunity. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes - including critical LATCH-UP mitigation guidance - that are not consolidated in the manufacturer datasheet alone.

RFQ संपर्क
KMC7448THX1400ND - 1.4GHz PowerPC G4 MPU 360-FCCBGA | NXP
KMC7448THX1400ND

KMC7448THX1400ND - 1.4GHz PowerPC G4 MPU 360-FCCBGA | NXP

The NXP KMC7448THX1400ND is a PowerPC G4 microprocessor IC from the MPC74xx family delivering 1.4 GHz 32-bit processing performance in a 360-pin FCCBGA (25x25) package. The device operates from a 1.15 V core supply and is qualified for the -40C to +105C industrial temperature range, making it suitable for compute-intensive embedded platforms requiring proven PowerPC instruction-set compatibility. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, cache, memory management unit and on-chip peripherals onto a single die; the PowerPC G4 architecture builds on this base with AltiVec/VMX SIMD extensions and superscalar out-of-order execution. The MPC74xx family sits within NXP/Freescale's high-performance PowerPC microprocessor hierarchy, above the MPC7xx line and aligned with infrastructure, networking and aerospace applications that benefit from mature PowerPC software ecosystems. Key features of the KMC7448THX1400ND include: 1.4 GHz core clock, 32-bit PowerPC architecture with AltiVec-compatible SIMD unit, 1.15 V core VDD, on-chip L1/L2 caches, integrated MMU and the standard PowerPC bus interface. The 360-FCCBGA package exposes the full PowerPC address/data bus plus JTAG, system management and interrupt pins, allowing direct attachment to platform ASICs and DDR memory bridges without external glue logic. Typical applications include industrial control and automation systems, aerospace and defense embedded computing platforms, networking and telecommunications infrastructure, and military-grade single-board computers. The wide industrial temperature window and long-life-cycle PowerPC toolchain support position this part for programs requiring 10+ years of supply continuity rather than the latest-edge consumer silicon. When designing with this part, ensure the 360-ball FCCBGA land pattern is routed with the controlled-impedance, matched-length layers specified in the NXP hardware design guide, and provide low-inductance decoupling within 100 mils of each VDD/VSS pair. Designers should also verify the host firmware supports PowerPC little-/big-endian boot and the platform's boot ROM vector configuration. This page synthesizes distributor pricing, real-time stock signals and drop-in alternatives from the same MPC74xx family, plus practical thermal and signal-integrity notes not found in the standalone datasheet.

RFQ संपर्क
KMPC8313CVRAGDB - PowerQUICC II Pro 400MHz MPU, 516-TEPBGA | NXP
KMPC8313CVRAGDB

KMPC8313CVRAGDB - PowerQUICC II Pro 400MHz MPU, 516-TEPBGA | NXP

The NXP KMPC8313CVRAGDB is a PowerQUICC II Pro microprocessor built on the PowerPC e300c3 core, operating at up to 400 MHz, and housed in a 516-ball TEPBGA package measuring 27x27 mm. The device integrates a 32-bit single-core CPU with a high-performance system bus, dedicated security engine, DDR1/DDR2 memory controller, dual 10/100/1000 Mbps Ethernet MACs (without encryption), USB 2.0, and four DMA channels, making it suitable for cost-sensitive networking and industrial control applications. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, executing instructions fetched from memory and orchestrating peripherals through on-chip controllers. Within the broader semiconductor taxonomy, MPUs sit alongside microcontrollers (MCUs), DSPs, and FPGAs as programmable logic devices, and the PowerQUICC II Pro family specifically targets communications infrastructure where integrated Ethernet and DMA offload reduce bill-of-materials cost. Key differentiating features of the KMPC8313CVRAGDB include the non-encryption variant of the MPC8313E (the 'A' designator denotes absence of the security engine), integrated PHY interfaces, hardware packet handling acceleration, and 16-bit DDR2 memory support up to 266 MHz. The 400 MHz core combined with dual Gigabit Ethernet MACs delivers wire-speed forwarding for entry-level routers, switches, and network appliances. The device uses a 32-bit PowerPC e300c3 superscalar core with separate 16 KB instruction and data caches, dual integer units, and a hardware MMU supporting Linux, VxWorks, and other embedded operating systems. The integrated system bus and DMA controller offload data movement from the CPU, leaving more headroom for protocol processing in networking workloads. Typical applications include SOHO routers, residential gateways, industrial Ethernet switches, networked printers, and embedded Linux appliances. Designers choose this part when they need mature PowerPC software support, integrated Gigabit Ethernet, and a long-life-cycle component for industrial designs. When designing with the KMPC8313CVRAGDB, ensure the PCB has a thermal dissipation path through the exposed pad and that the 1.0 mm pitch BGA is assembled by an experienced contract manufacturer. Programmable clocking and configurable SerDes modes require careful reference-clock jitter analysis to meet Ethernet PHY compliance. This page synthesizes distributor stock data, parametric drop-in alternatives, and practical design notes that complement but do not replace the official NXP MPC8313 hardware specifications reference manual for the part.

RFQ संपर्क