5CSEBA2U19I7N vs 5CSEBA4U19I7LN तुलना
विस्तृत दोनों ओर की तुलना 5CSEBA2U19I7N द्वारा Intel और 5CSEBA4U19I7LN द्वारा Intel. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | 5CSEBA2U19I7N | 5CSEBA4U19I7LN |
|---|---|---|
| ब्रांड | Intel | Intel |
| श्रेणी | FPGA & CPLD | FPGA & CPLD |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Family | Cyclone V SE SoC FPGA | Cyclone V SE SoC FPGA |
| Logic Elements | 25K | 40K |
| HPS | Dual ARM Cortex-A9 MPCore with CoreSight | — |
| HPS Clock Frequency | 800 MHz | — |
| Embedded Memory | 1,400 Kbits | — |
| DSP Blocks (18x18 Multipliers) | 66 | 56 |
| User I/O Pins | 145 | — |
| LVDS Support | Up to 1.25 Gbps | — |
| पैकेज | 484-UBGA (19x19 mm) | 484-pin UFBGA (19x19 mm, 0.8 mm pitch) |
| Process Technology | 28 nm TSMC low-power | TSMC 28 nm low-power |
| ऑपरेटिंग तापमान | -40C to +100C (Industrial) | — |
| Voltage - Input (Max) | 1.1 V core | — |
| Peripherals | USB 2.0 OTG, Gigabit Ethernet, CAN, UART, SPI, I2C, NAND/NOR flash controllers | — |
| HPS-FPGA Interconnect | AXI bridges (3 master / 3 slave), FPGA-to-HPS SDRAM, DMA | — |
| RoHS स्थिति | Compliant | Compliant |
| माउंटिंग प्रकार | Surface Mount (BGA) | Surface Mount (BGA) |
| Hard Processor System | — | Dual-core ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Frequency | — | 925 MHz |
| FPGA Logic Performance | — | up to 925 MHz DSP / 300 MHz logic |
| Embedded Memory (M10K) | — | [DATA_NEEDED: total M10K bits] |
| PLLs | — | [DATA_NEEDED: PLL count per family datasheet] |
| Memory Controller | — | DDR2/DDR3/LPDDR2 with ECC (hardened in HPS) |
| HPS Peripherals | — | UART, SPI, I2C, USB 2.0 OTG, EMAC, SD/MMC, NAND, GPIO |
| Operating Temperature (Industrial) | — | -40C to +100C (I7 grade, inferred from MPN suffix) |
| Supply Voltage (core) | — | 1.1 V typical (Cyclone V family) |
| Configuration Scheme | — | Serial (EPCS) or Quad-Serial Flash |