AD5258BRMZ1-R7 vs AD5258BRMZ100 तुलना
विस्तृत दोनों ओर की तुलना AD5258BRMZ1-R7 द्वारा Analog Devices और AD5258BRMZ100 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ अंतिम खरीदविशेषता तुलना
| पैरामीटर | AD5258BRMZ1-R7 | AD5258BRMZ100 |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Digital Potentiometers | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | अंतिम बार खरीदें |
| End-to-End Resistance | 1 kΩ | 100 kΩ |
| Number of Taps | 64 positions | 64 |
| Number of Circuits | 1 | — |
| इंटरफ़ेस | I²C-compatible (2-wire serial) | I²C-compatible (2-wire) |
| मेमोरी प्रकार | Nonvolatile EEPROM (wiper settings retained) | — |
| Resistance Tolerance | 0.1 % accuracy stored in EEPROM | ±30 % |
| Differential Non-Linearity (DNL) | ±1 LSB (max) | — |
| Wiper Resistance | 75 Ω (typical) | — |
| VLogic Pin Range | 1.8 V to 5.5 V (interface logic level) | — |
| Supply Voltage (VDD) | 2.7 V to 5.5 V [DATA_NEEDED: full VDD range - confirm in datasheet Electrical Characteristics] | — |
| Power-on EEPROM Refresh | <1 ms | — |
| Address Pins | AD0 and AD1 (decode up to 4 devices on bus) | — |
| Software Write Protect | Yes (command-based) | Yes (via I²C command) |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C | −40 °C to +125 °C |
| पैकेज | 10-pin MSOP (3 mm × 4.9 mm) | 10-pin MSOP (RM), 3 mm × 4.9 mm |
| माउंटिंग प्रकार | Surface Mount | — |
| MSL स्तर | MSL 1 (per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | Compliant |
| Lead-Free | Yes | — |
| Tape and Reel Packaging | Yes (-R7 suffix, 7" reel) | — |
| Product Type | — | Digital Potentiometer (DigiPOT) |
| Number of Channels | — | 1 |
| EEPROM-stored Tolerance Accuracy | — | 0.1 % |
| Address Decode Pins | — | AD0 (2 pins, supports up to 4 devices on bus) |
| VLOGIC Range | — | 2.7 V to 5.5 V |
| Analog Supply / Terminal Voltage | — | 2.7 V to 5.5 V |
| Power-on EEPROM Refresh Time | — | < 1 ms |
| Nonvolatile Memory | — | Yes (wiper settings retained on power-down) |
| Taper | — | Linear |