AD693AE vs AD693AD तुलना
विस्तृत दोनों ओर की तुलना AD693AE द्वारा Analog Devices और AD693AD द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | AD693AE | AD693AD |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Loop-powered 4-20 mA sensor transmitter | Monolithic 4-20 mA loop-powered sensor signal conditioner |
| Signal Input | Low-level transducer voltage | — |
| Input Interface | Instrumentation amplifier front end | — |
| Precalibrated Input Span | 60 mV | — |
| Output Current Range | 4-20 mA | 0-20 mA or 4-20 mA, depending on configuration |
| Precalibrated Output Span | 4-20 mA unipolar; 0-20 mA unipolar; 8 mA bipolar | — |
| Loop Supply | Loop-powered operation | — |
| Loop Configuration | Two-wire current loop | — |
| On-Chip Features | Voltage reference and auxiliary amplifier | — |
| RTD Interface | Precalibrated 100 ohm RTD interface | Precalibrated 100 ohm RTD interface |
| Calibration | Independently adjustable output span and zero | — |
| पैकेज | 20-CLCC (9 x 9 mm) | 20-lead ceramic DIP |
| माउंटिंग प्रकार | Surface mount | Through-hole |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| Loop Voltage Range | [DATA_NEEDED: loop voltage range] | — |
| अधिकतम आउटपुट करंट | [DATA_NEEDED: maximum output current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Power Supply Rejection | [DATA_NEEDED: power supply rejection] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Input Signal Type | — | Voltage |
| Output Signal Type | — | Current |
| Supply Voltage Range | — | 12 V to 36 V |
| Precalibrated Input Spans | — | 30 mV and 60 mV |
| Offset Voltage | — | 200 uV |
| Amplifier Configuration | — | 5-amplifier instrumentation-amplifier front end |
| Integrated Reference | — | On-chip voltage reference |
| Auxiliary Amplifier | — | Integrated auxiliary amplifier |
| Powering Method | — | Loop-powered from a two-wire current loop |
| पिन काउंट | — | 20 pins |