AD7862AR-10 vs AD7863AR-10REEL तुलना
विस्तृत दोनों ओर की तुलना AD7862AR-10 द्वारा Analog Devices और AD7863AR-10REEL द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
AD7863AR-10REEL - Dual 175 kSPS 14-Bit Simultaneous-Sampling ADC | Analog Devices
AD7863AR-10REEL ✓ सक्रियविशेषता तुलना
| पैरामीटर | AD7862AR-10 | AD7863AR-10REEL |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Part Number | AD7862AR-10 | — |
| Number of ADCs | 2 | — |
| रेज़ोल्यूशन | 12 bits | 14 bits |
| Conversion Rate (Throughput) | 250 kSPS per channel | — |
| Conversion Time | 4 microseconds | 5.2 us |
| Input Channels | 4 (2 channels x 2 inputs) | 4 (2 per ADC, channel selected by A0) |
| इनपुट वोल्टेज रेंज | ±10 V (AD7862-10) | — |
| Analog Input Type | Single-ended, true bipolar | — |
| सप्लाई वोल्टेज | +5 V single supply | Single 5 V |
| Supply Current (typ) | 12 mA (60 mW) | — |
| Architecture | SAR (Successive Approximation) | — |
| Internal Reference | +2.5 V | 2.5 V (on-chip, with 0.1 uF bypass caps) |
| Aperture Delay Matching | Tight (matched between two ADCs) | — |
| इंटरफ़ेस | High-speed parallel | — |
| Integral Nonlinearity (INL) | ±1 LSB max (typical) / ±0.5 LSB (B-grade) | — |
| Signal-to-Noise Ratio (SNR) | 70 dB typical | — |
| Common-Mode Rejection | 80 dB typical at 50 kHz | — |
| Power Dissipation | 60 mW typical | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C | — |
| पैकेज | 28-pin SOIC (R-28) wide body | 28-SOIC (0.295 inch, 7.50 mm width) |
| Channel Selection | A0 logic input | — |
| Track-and-Hold | Yes, two integrated T/H amplifiers | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS compliance] |
| Number of Channels | — | 4 analog inputs grouped into 2 simultaneous-sampling channels |
| Sampling Rate (per channel) | — | 175 kSPS |
| ADC Architecture | — | SAR (Successive Approximation), 2 ADCs with track/hold |
| Input Range | — | ±10 V (or ±2.5 V with -10 range option) |
| Data Interface | — | Parallel (14-bit) |
| Simultaneous Sampling | — | Yes (single CONVST triggers both ADCs) |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| Process Technology | — | LC2MOS (linear-compatible CMOS) |
| Packaging | — | Tape & Reel (REEL) |