ADC12L032CIWM vs ADC12L034CIWM तुलना
विस्तृत दोनों ओर की तुलना ADC12L032CIWM द्वारा Texas Instruments और ADC12L034CIWM द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ADC12L032CIWM | ADC12L034CIWM |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | Obsolete | Obsolete |
| रेज़ोल्यूशन | 12-bit plus sign | 12 bits + sign |
| Architecture | SAR (Successive Approximation Register) | Successive-Approximation Register (SAR) |
| Number of Analog Input Channels | 2 (single-ended) / 1 (differential) | — |
| Sample Rate (max) | 73 ksamples/s (0.73 MHz) | — |
| Conversion Time | 8.8 us | [DATA_NEEDED: conversion time in us] |
| Analog Supply Voltage | 3.0 V to 5.5 V | 3.3 V nominal (3.0 V to 5.5 V operating range per datasheet family) |
| Digital Supply Voltage | 3.0 V to 5.5 V | — |
| Data Interface | NSC MICROWIRE, Serial, SPI-compatible | — |
| Input Type | Pseudo-differential / Single-ended | Differential, Pseudo-Differential, Single-Ended |
| Self-Calibration | Yes (on-chip, on-demand) | Yes (on-chip offset + linearity) |
| Sample/Hold | Integrated | — |
| ऑपरेटिंग तापमान | -40C to +85C (industrial grade) | — |
| पैकेज | 20-pin SOIC Wide (300 mil, EIAJ) | 24-pin SOIC Wide (7.5 mm body width) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance] | unknown |
| Number of Input Channels | — | 4 (single-ended, pseudo-differential, or differential) |
| Digital I/O Supply Voltage | — | 3.3 V nominal |
| Digital Interface | — | Serial (SPI/QSPI/MICROWIRE-compatible) |
| Sample-and-Hold to ADC Ratio | — | 1:1 |
| Number of A/D Converters | — | 1 |
| Maximum Serial Clock | — | 5 MHz (per datasheet family) |
| ऑपरेटिंग तापमान रेंज | — | -40C to +85C (industrial) |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL in LSB] |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL in LSB] |
| SNR / ENOB | — | [DATA_NEEDED: SNR or ENOB] |