ADM203JN vs MAX211IDB तुलना
विस्तृत दोनों ओर की तुलना ADM203JN द्वारा Analog Devices और MAX211IDB द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ADM203JN | MAX211IDB |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | High-speed CMOS RS-232 driver/receiver | RS-232 Line Driver/Receiver (Transceiver) |
| सप्लाई वोल्टेज | 5 V | — |
| Transmission Rate | 120 kB/s | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Interface Standard | EIA-232-E and V.28 | — |
| External Charge-Pump Capacitors | Not required for ADM203 | — |
| DC-DC Converter | Onboard | — |
| Nominal DC-DC Output | 9 V | — |
| Logic Supply Type | Single 5 V supply | — |
| पैकेज | DIP-20 | SSOP-28 (DB) |
| Terminal Count | 20 | — |
| माउंटिंग प्रकार | Through-hole | Surface Mount |
| Temperature Grade | Commercial | — |
| Cable Length Support | Extended cable lengths supported by high-drive-current outputs | — |
| Document Page Count | 6 pages | — |
| Datasheet File Size | 120 kB | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Operating Voltage Tolerance | [DATA_NEEDED: operating voltage tolerance] | — |
| Output Voltage Levels | [DATA_NEEDED: RS-232 output voltage levels] | — |
| Receiver Input Range | [DATA_NEEDED: receiver input voltage range] | — |
| क्वाइसेंट करंट | [DATA_NEEDED: quiescent current] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals Status | [DATA_NEEDED: conflict-minerals status] | — |
| Number of Drivers | — | 4 |
| Number of Receivers | — | 5 |
| Supply Voltage (VCC) | — | 4.5 V to 5.5 V |
| Data Rate (Max) | — | 120 kbps |
| Driver Output Swing | — | ±9 V (typ) |
| ESD Protection (HBM, RS-232 pins) | — | ±15 kV |
| Supply Current (typ, no load) | — | 1.5 mA |
| Charge Pump Caps | — | 4 external 0.1 µF |
| Receiver Input Threshold | — | 0.8 V (low) / 2.4 V (high) |
| Receiver Hysteresis | — | 0.5 V (typ) |
| Standards Compliance | — | TIA/EIA-232-F |
| Input Logic Compatibility | — | TTL/CMOS |