ADM232LAR vs ADM232LJR तुलना

विस्तृत दोनों ओर की तुलना ADM232LAR द्वारा Analog Devices और ADM232LJR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM232LAR ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices

ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices

ADM232LAR ✓ सक्रिय
Analog Devices
ADM232LJR ADM232LJR - 5V 120kbps RS-232 Transceiver | Analog Devices

ADM232LJR - 5V 120kbps RS-232 Transceiver | Analog Devices

ADM232LJR ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM232LAR ADM232LJR
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
सप्लाई वोल्टेज 5 V (single supply) 5 V
Transceiver Configuration 2 drivers / 2 receivers (2/2) —
डेटा दर 120 kB/s —
Interface Standard Compliance EIA-232-E and V.28 —
Output Swing 9 V with 5 V supply —
On-Board DC-DC Converters Yes —
Required External Capacitors 1 uF —
Shutdown Low power shutdown mode —
Receiver Supply Current in Shutdown 1 uA (receivers active in shutdown) —
Receiver Input Voltage Tolerance 30 V —
पैकेज 16-lead SOIC (SOIC-16) 16-pin SOIC
पिन की संख्या 16 —
माउंटिंग प्रकार Surface Mount Surface mount
Technology CMOS —
Automotive Qualification (AEC-Q100) not_applicable —
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Driver Output Current [DATA_NEEDED: driver output current] —
RoHS स्थिति [DATA_NEEDED: RoHS status for ADM232LAR] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status for ADM232LAR] [DATA_NEEDED: REACH status]
Product Type — RS-232 line-driver and receiver transceiver
Number of Drivers — 2
Number of Receivers — 2
Maximum Data Rate — 120 kbps
Driver Output Swing — ±9 V
Charge-Pump Capacitor Value — 1 µF
Receiver Input Voltage Rating — 30 V
Power Supply Configuration — Single 5 V supply
DC-DC Converter — Onboard
Shutdown Feature — Low-power shutdown; receivers active in shutdown
Interface Standard — EIA-232-E and V.28
Logic Technology — CMOS
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध