ADM4850AR vs ADM4851AR तुलना

विस्तृत दोनों ओर की तुलना ADM4850AR द्वारा Analog Devices और ADM4851AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM4850AR ADM4850AR - 115 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM4850AR - 115 kbps RS-485/RS-422 Transceiver | Analog Devices

ADM4850AR ✓ सक्रिय
Analog Devices
ADM4851AR ADM4851AR - 500 kbps RS-485/422 Transceiver | Analog Devices

ADM4851AR - 500 kbps RS-485/422 Transceiver | Analog Devices

ADM4851AR ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM4850AR ADM4851AR
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs RS-485 Transceivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Differential RS-485/RS-422 line transceiver RS-485/RS-422 differential line transceiver
Manufacturer Analog Devices —
सप्लाई वोल्टेज 5 V 5 V
Maximum Data Rate 115 kbps 500 kbps
Communication Standard EIA RS-485 and RS-422 —
Duplex Support Half-duplex and full-duplex —
Slew Rate Slew-rate limited —
Receiver Fail-Safe True fail-safe receiver —
Transmitter and Receiver Count 1 transmitter and 1 receiver —
Bus Configuration Multipoint bus transmission lines —
पैकेज 8-lead SOIC 8-lead SOIC
माउंटिंग प्रकार Surface mount Surface Mount
Automotive Qualification [DATA_NEEDED: automotive qualification status] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
Output Differential Voltage [DATA_NEEDED: output differential voltage] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection ratio] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Communication Mode — Half-duplex
Standards Compatibility — EIA RS-485 and EIA RS-422 compliant
Receiver Fail-Safe Behavior — True fail-safe receiver
Transition Rate Control — Reduced slew rate for low EMI
Bus Topology — Multipoint bus transmission line
Signal Type — Differential
Lead Count — 8 leads
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Driver Output Current — [DATA_NEEDED: driver output current]
ESD Protection Rating — [DATA_NEEDED: ESD protection rating]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध