ADM485JRZ vs ADM4856AR तुलना

विस्तृत दोनों ओर की तुलना ADM485JRZ द्वारा Analog Devices और ADM4856AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM485JRZ ADM485JRZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485JRZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485JRZ ✓ सक्रिय
Analog Devices
ADM4856AR ADM4856AR - 2.5 Mbps RS-485/RS-422 Transceiver | Analog Devices

ADM4856AR - 2.5 Mbps RS-485/RS-422 Transceiver | Analog Devices

ADM4856AR ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM485JRZ ADM4856AR
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 differential line transceiver RS-485/RS-422 differential line transceiver
Supply Voltage Range 4.75 V to 5.25 V —
Maximum Data Rate 5 Mbits/s 2.5 Mbps
Communication Mode Half-duplex —
Supported Standards EIA RS-485 and RS-422 —
Driver Output Count 1 differential driver —
Receiver Input Count 1 differential receiver —
Driver and Receiver Control Independently enabled —
पैकेज 8-pin SOIC 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface mount
Temperature Grade Commercial and industrial temperature range Commercial and industrial temperature ranges
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: minimum and maximum operating temperatures]
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
क्वाइसेंट करंट [DATA_NEEDED: quiescent current] —
सप्लाई करंट [DATA_NEEDED: driver and receiver supply current] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Driver Output Differential Voltage [DATA_NEEDED: driver output differential voltage] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
सप्लाई वोल्टेज — 5 V
Communication Modes — Half-duplex and full-duplex
Standards — EIA RS-485 and RS-422 compliant
Slew Rate — Reduced, slew-rate limited
Receiver Safety — True fail-safe receiver
Package Width — 3.90 mm
Driver Architecture — Differential line driver
Receiver Architecture — Differential line receiver
Bus Application — Multipoint bus transmission lines
Logic Supply Level — 5 V CMOS
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Maximum Supply Voltage — [DATA_NEEDED: maximum supply voltage]
Input and Output Current — [DATA_NEEDED: input and output current ratings]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध