ADS7844N vs MAX147AEAP+TG05 तुलना
विस्तृत दोनों ओर की तुलना ADS7844N द्वारा Texas Instruments और MAX147AEAP+TG05 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ADS7844N | MAX147AEAP+TG05 |
|---|---|---|
| ब्रांड | Texas Instruments | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bit | 12 bits |
| Number of Channels | 8 channels | — |
| Input Configuration | 8 single-ended or 4 differential inputs | — |
| Conversion Rate | 200 kHz | 133 ksps max |
| सप्लाई वोल्टेज | Single supply, +5 V typical application | — |
| Reference Voltage Range | 100 mV to VCC | — |
| इनपुट वोल्टेज रेंज | 0 V to VREF | 0 to VREF (unipolar) or ±VREF (bipolar) |
| Typical Power Dissipation | 3 mW at 200 kHz throughput and +5 V supply | — |
| इंटरफ़ेस | Synchronous serial interface | — |
| ADC Architecture | Sampling SAR ADC | — |
| Shutdown Mode | Yes | — |
| पैकेज | 20-pin SSOP | 20-pin SSOP |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| आउटपुट प्रकार | Serial output | — |
| Product Description | 12-bit, 8-channel serial-output sampling ADC | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (E grade, AEAP) |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Input Channels | — | 8 single-ended / 4 differential |
| Converter Architecture | — | SAR (Successive Approximation Register) |
| Analog Input Modes | — | Single-ended or differential, software-selectable |
| Supply Voltage (VDD) | — | +2.7 V to +3.6 V |
| Operating Supply Current | — | 1.2 mA typ |
| Power-Down Current | — | 1 µA typ |
| Internal Reference | — | +2.5 V, internal |
| External Reference Input | — | Yes, VREF pin overdrivable |
| Serial Interface | — | SPI / QSPI / MICROWIRE compatible |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL value, typical ±1 LSB max per datasheet family] |
| Differential Nonlinearity (DNL) | — | ±1 LSB, no missing codes |
| Track/Hold Bandwidth | — | High bandwidth, per datasheet |
| Shutdown Pin | — | Yes, hard-wired active-low SHDN-bar |
| Software Power-Down | — | Yes, selectable via serial interface |
| Auto-Shutdown End of Conversion | — | Yes, programmable |
| MSL स्तर | — | 1 per SSOP JEDEC J-STD-020 |