ADS8341E vs ADS8343E तुलना

विस्तृत दोनों ओर की तुलना ADS8341E द्वारा Texas Instruments और ADS8343E द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
ADS8341E ADS8341E - 16-Bit 4-Channel 100kHz ADC | Texas Instruments

ADS8341E - 16-Bit 4-Channel 100kHz ADC | Texas Instruments

ADS8341E ✓ सक्रिय
Texas Instruments
ADS8343E ADS8343E - 16-Bit, 4-Channel ADC | Texas Instruments

ADS8343E - 16-Bit, 4-Channel ADC | Texas Instruments

ADS8343E ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADS8341E ADS8343E
ब्रांड Texas Instruments Texas Instruments
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 16 bit 16 bit
Input Channels 4 single-ended or 2 differential channels —
Conversion Rate 100 kHz 100 kSPS
Signal-to-Noise and Distortion Ratio 86 dB SINAD —
Architecture Successive-approximation sampling ADC —
Output Interface Synchronous serial interface —
Typical Supply Condition 5 V —
Typical Power Dissipation 8 mW at 100 kHz throughput and 5 V supply 8 mW at 100 kSPS and 5 V supply
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C -40 °C to +85 °C
पैकेज SSOP-16 16-pin SSOP
माउंटिंग प्रकार Surface mount Surface mount
Onboard Multiplexer Yes —
Pin Compatibility Pin-for-pin compatible with ADS7841 Pin-for-pin compatible with ADS7841 and ADS8341
Low-Power Suitability Designed for battery-operated systems —
Remote Acquisition Suitability Serial interface supports low-cost isolated data acquisition —
Supply Voltage Range [DATA_NEEDED: Supply Voltage Range] 2.7 V to 5.25 V
इनपुट वोल्टेज रेंज [DATA_NEEDED: Input Voltage Range] —
रेफ़रेंस वोल्टेज [DATA_NEEDED: Reference Voltage] —
Integral Nonlinearity [DATA_NEEDED: Integral Nonlinearity] —
Differential Nonlinearity [DATA_NEEDED: Differential Nonlinearity] —
RoHS स्थिति [DATA_NEEDED: RoHS Status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH Status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: Lead-Free Status] [DATA_NEEDED: lead-free status]
ADC Type — Successive-approximation sampling ADC
Total Input Channels — 4 channels
Single-Ended Input Configuration — 4 channels
Differential Input Configuration — 2 channels
Signal-to-Noise and Distortion — 86 dB SINAD
Input Range — Bipolar, ±VREF
Reference Voltage Range — 500 mV to VCC/2
इंटरफ़ेस प्रकार — Serial interface
Shutdown Mode — Yes
Input Multiplexer — Onboard 4-channel multiplexer
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध