AS1521-T vs AS1531-T तुलना

विस्तृत दोनों ओर की तुलना AS1521-T द्वारा ams OSRAM और AS1531-T द्वारा ams OSRAM. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

ams OSRAM
AS1521-T AS1521-T - 10-Bit 300ksps 8-Ch SAR ADC | ams OSRAM

AS1521-T - 10-Bit 300ksps 8-Ch SAR ADC | ams OSRAM

AS1521-T ✓ सक्रिय
ams OSRAM
AS1531-T AS1531-T - 12-Bit 300ksps Low-Power ADC | ams OSRAM

AS1531-T - 12-Bit 300ksps Low-Power ADC | ams OSRAM

AS1531-T ✓ सक्रिय

विशेषता तुलना

पैरामीटर AS1521-T AS1531-T
ब्रांड ams OSRAM ams OSRAM
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 10 bit 12 bits
Architecture SAR (Successive Approximation Register) SAR (Successive Approximation Register)
Number of Channels 8 single-ended / 4 differential —
सैंपलिंग रेट 300 ksps 300 ksps (AS1531); up to 400 ksps (AS1530 variant)
Input Type Differential, Pseudo-Differential, Single-Ended Single-Ended, pseudo-differential (configurable)
Supply Voltage (Single) 2.7 V to 5.25 V 2.7 V to 5.25 V
Supply Current (Full Speed) 1.1 mA typical —
Power Consumption 3.6 mW at 3 V, 300 ksps —
शटडाउन करंट 1 µA —
इंटरफ़ेस SPI / QSPI / MICROWIRE compatible —
Maximum Serial Clock 4 MHz —
INL (इंटीग्रल नॉनलीनियरिटी) ±0.5 LSB (max) —
DNL (Differential Nonlinearity) ±0.5 LSB (max, no missing codes) —
SINAD at 100 kHz Input 71 dB —
ऑपरेटिंग तापमान -40 °C to +85 °C -40 C to +85 C (industrial)
पैकेज 20-TSSOP, 4.4 mm body width 20-pin TSSOP
माउंटिंग प्रकार Surface Mount Surface Mount
Reference Type External (REF pin) —
RoHS स्थिति Compliant Compliant
Number of Input Channels — 4 or 8 (single-ended, multiplexed)
Supply Current (Active) — [DATA_NEEDED: typical active current at 3V/5V]
Supply Current (Power-Down) — [DATA_NEEDED: typical power-down current in uA]
Analog Input Range — 0 V to VREF
रेफ़रेंस वोल्टेज — External, up to VDD
Data Interface — MICROWIRE, QSPI, SPI, Serial
Packaging — Tape and Reel (TR)
INL (max) — [DATA_NEEDED: max INL in LSB]
DNL (max) — [DATA_NEEDED: max DNL in LSB]
THD — Approximately -80 dB (class-typical for 12-bit SAR at low input frequency)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध