AS1531 vs AS1531-T तुलना

विस्तृत दोनों ओर की तुलना AS1531 द्वारा ams OSRAM और AS1531-T द्वारा ams OSRAM. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

ams OSRAM
AS1531 AS1531 - 12-Bit 8-Channel 300ksps ADC | ams OSRAM | 20-TSSOP

AS1531 - 12-Bit 8-Channel 300ksps ADC | ams OSRAM | 20-TSSOP

AS1531 ✓ सक्रिय
ams OSRAM
AS1531-T AS1531-T - 12-Bit 300ksps Low-Power ADC | ams OSRAM

AS1531-T - 12-Bit 300ksps Low-Power ADC | ams OSRAM

AS1531-T ✓ सक्रिय

विशेषता तुलना

पैरामीटर AS1531 AS1531-T
ब्रांड ams OSRAM ams OSRAM
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 12 bits 12 bits
Sample Rate 300 ksps —
Number of Input Channels 4 single-ended / 2 pseudo-differential (8 with COM pin) 4 or 8 (single-ended, multiplexed)
Supply Voltage (VDD) +2.7 V to +3.6 V —
Supply Current (300 ksps) 2.2 mA —
Supply Current (Reduced-Power Mode) [DATA_NEEDED: reduced-power mode current] —
Supply Current (Power-Down) [DATA_NEEDED: power-down current] [DATA_NEEDED: typical power-down current in uA]
Internal Reference Voltage 2.5 V —
Analog Input Range (Single-Ended) 0 V to VREF —
Analog Input Range (Pseudo-Differential) 0 V to 2xVREF —
इंटरफ़ेस SPI / QSPI / MICROWIRE-compatible serial —
Architecture SAR (Successive Approximation Register) SAR (Successive Approximation Register)
Integral Nonlinearity (INL) [DATA_NEEDED: INL max] —
Differential Nonlinearity (DNL) [DATA_NEEDED: DNL max] —
Signal-to-Noise + Distortion (SINAD) [DATA_NEEDED: SINAD] —
पैकेज 20-pin TSSOP 20-pin TSSOP
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] -40 C to +85 C (industrial)
RoHS स्थिति Compliant (per DigiKey listing) Compliant
सैंपलिंग रेट — 300 ksps (AS1531); up to 400 ksps (AS1530 variant)
Supply Voltage (Single) — 2.7 V to 5.25 V
Supply Current (Active) — [DATA_NEEDED: typical active current at 3V/5V]
Analog Input Range — 0 V to VREF
रेफ़रेंस वोल्टेज — External, up to VDD
Data Interface — MICROWIRE, QSPI, SPI, Serial
Input Type — Single-Ended, pseudo-differential (configurable)
माउंटिंग प्रकार — Surface Mount
Packaging — Tape and Reel (TR)
INL (max) — [DATA_NEEDED: max INL in LSB]
DNL (max) — [DATA_NEEDED: max DNL in LSB]
THD — Approximately -80 dB (class-typical for 12-bit SAR at low input frequency)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध