ATMEGA164A-MUR vs ATMEGA1284P-MUR तुलना
विस्तृत दोनों ओर की तुलना ATMEGA164A-MUR द्वारा Microchip Technology और ATMEGA1284P-MUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA164A-MUR - 16KB Flash AVR MCU 20MHz VQFN-44 | Microchip
ATMEGA164A-MUR ✓ सक्रियMicrochip Technology
ATMEGA1284P-MUR - 8-bit AVR MCU 20MHz 128KB Flash | Microchip
ATMEGA1284P-MUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA164A-MUR | ATMEGA1284P-MUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | AVR 8-bit RISC | — |
| Core Size | 8-bit | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 20 MHz | — |
| Flash Memory | 16 KB (8K x 16) | — |
| EEPROM | 512 B | 4 KB |
| SRAM | 1 KB | 16 KB |
| Supply Voltage Range | 1.8 V to 5.5 V | 2.7 V to 5.5 V |
| General Purpose I/O | 32 I/O lines | — |
| ADC Resolution | 10-bit | — |
| ADC Channels | 8 channels | — |
| Communication Interfaces | USART, SPI, TWI (I2C) | — |
| Timers | 2 x 8-bit, 1 x 16-bit | — |
| Instruction Count | 133 instructions, most single-cycle | — |
| पैकेज | 44-VQFN (7x7 mm) with exposed pad | 44-VQFN (7x7 mm), exposed pad |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (T&R), Green | — |
| Moisture Sensitivity Level | [DATA_NEEDED: MSL level] | — |
| Core | — | AVR 8-bit RISC |
| Max Clock Frequency | — | 20 MHz |
| Flash Program Memory | — | 128 KB (64K x 16), In-System Programmable |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| General Purpose I/O Lines | — | 32 |
| USARTs | — | 2 |
| Timer/Counters | — | 3 (with compare modes and PWM) |
| ADC | — | 8-channel, 10-bit |
| Serial Interfaces | — | TWI (I2C, byte-oriented), SPI, 2x USART |
| Real Time Counter | — | Yes (RTC) |
| Working Registers | — | 32 x 8 general purpose |
| Instructions | — | 131 instructions, most single-cycle |
| Multiplier | — | On-chip 2-cycle hardware multiplier |
| Debug / Programming | — | ISP (In-Circuit Serial Programming), JTAG |
| Life Cycle Stage | — | Active |