ATMEGA168V-10AI vs ATMEGA88PA-AUR तुलना
विस्तृत दोनों ओर की तुलना ATMEGA168V-10AI द्वारा Microchip Technology और ATMEGA88PA-AUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA168V-10AI - AVR 8-bit MCU 16KB Flash 1.8V 10MHz TQFP-32 | Microchip
ATMEGA168V-10AI ✓ सक्रियMicrochip Technology
ATMEGA88PA-AUR - AVR 8-Bit MCU 20MHz 8KB Flash TQFP-32 | Microchip
ATMEGA88PA-AUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA168V-10AI | ATMEGA88PA-AUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | AVR 8-bit RISC | 8-bit AVR RISC |
| Flash Program Memory | 16 KB | — |
| SRAM | 1 KB | 1 KB |
| EEPROM | 512 B | 512 B |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 10 MHz | 20 MHz |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Throughput | Up to 10 MIPS (1 MIPS per MHz) | — |
| Instructions | 131 instructions, most single-cycle | — |
| GPIO Count | 23 general purpose I/O lines | — |
| ADC | 8-channel 10-bit | — |
| Timers/Counters | 3 (two 8-bit, one 16-bit) | Two 8-bit, one 16-bit |
| Communication Interfaces | USART, SPI, Two-Wire Interface (I2C) | SPI, TWI (I2C), USART |
| Debug System | debugWIRE on-chip debug | — |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | -40C to +85C |
| पैकेज | TQFP-32 (7x7 mm), gull-wing leads | 32-TQFP (7x7 mm, 0.8 mm pitch) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Working Registers | 32 x 8-bit general purpose | 32 |
| Flash Memory | — | 8 KB (4K x 16) |
| General Purpose I/O | — | 23 I/O lines |
| ADC Resolution | — | 10-bit |
| ADC Channels | — | 8 multiplexed channels |
| Packaging | — | Tape and Reel |
| Special Features | — | picoPower technology, ISP Flash with read-while-write |