ATMEGA16L-8AI vs ATMEGA169V-8AI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA16L-8AI द्वारा Microchip Technology और ATMEGA169V-8AI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA16L-8AI - 8MHz AVR MCU 16KB Flash TQFP-44 | Microchip
ATMEGA16L-8AI ✓ सक्रियMicrochip Technology
ATMEGA169V-8AI - 8-bit AVR MCU, 16KB Flash, LCD | Microchip
ATMEGA169V-8AI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA16L-8AI | ATMEGA169V-8AI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | AVR enhanced RISC, 8-bit | — |
| Core Series | AVR ATmega | — |
| Flash Program Memory | 16 KB (8K x 16), In-System Programmable | 16 KB (8K x 16) |
| SRAM | 1 KB | 1 KB |
| EEPROM | 512 B | 512 B |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 8 MHz | — |
| Maximum Throughput | Up to 16 MIPS at 16 MHz (device family rating) | — |
| Supply Voltage Range | [DATA_NEEDED: exact VCC min/max per speed grade] | — |
| ADC Resolution | 10-bit | 10-bit, 8-channel |
| ADC Channels | 8 single-ended; 7 differential (TQFP); 2 differential with 1x/10x/200x gain | — |
| Debug Interface | JTAG for on-chip debug | — |
| Instruction Set | 131 instructions, most single-clock cycle | — |
| General Purpose Registers | 32 | — |
| पैकेज | 44-TQFP (10x10 mm) | 64-TQFP (14x14 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | Industrial (I-grade, per Atmel suffix convention -40C to +85C) | -40C to +85C (I grade, industrial) |
| Description | 8-bit Microcontroller with 16K Bytes In-System Programmable Flash | — |
| Core Processor | — | AVR |
| Core Size | — | 8-Bit |
| Speed | — | 8 MHz |
| Operating Voltage Range | — | 1.8 V to 5.5 V |
| General Purpose I/O | — | 54 |
| LCD Controller | — | On-chip with internal step-up voltage |
| Timers | — | 3 flexible timers with PWM |
| Debug/Programming Interfaces | — | JTAG (boundary-scan, on-chip debug, ISP) |
| Instructions | — | 131 instructions, most single-cycle |
| MIPS Throughput | — | Up to 16 MIPS (fully static operation) |