ATMEGA16L-8PU vs ATMEGA32L-8PC तुलना
विस्तृत दोनों ओर की तुलना ATMEGA16L-8PU द्वारा Microchip Technology और ATMEGA32L-8PC द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA16L-8PU - 8MHz AVR MCU 16KB Flash DIP-40 | Microchip
ATMEGA16L-8PU ✓ सक्रियMicrochip Technology
ATMEGA32L-8PC - 8-Bit AVR MCU 8MHz 32KB Flash 40-PDIP | Microchip
ATMEGA32L-8PC ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA16L-8PU | ATMEGA32L-8PC |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Max Clock Speed | 8 MHz | — |
| Flash Memory | 16 KB (8K x 16) In-System Programmable | — |
| SRAM | 1 KB | 2 KB |
| EEPROM | 512 B | 1 KB |
| Supply Voltage Range | 2.7 V to 5.5 V | — |
| I/O Ports | 32 I/O (4 x 8-bit ports: PORTA-PORTD) | — |
| ADC | 8-channel 10-bit | 8-channel 10-bit |
| Communication Interfaces | USART, SPI, TWI (I2C-compatible) | — |
| Timers | 3 (two 8-bit, one 16-bit with PWM) | — |
| JTAG | Yes (boundary-scan and on-chip debug) | — |
| Instructions | 133 instructions, most single-cycle | 131 instructions, most single-cycle |
| General Purpose Registers | 32 x 8-bit | — |
| ऑपरेटिंग तापमान | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 40-PDIP (0.600 inch, through-hole) | 40-PDIP (P) |
| माउंटिंग प्रकार | Through Hole | Through Hole |
| Oscillator | Internal RC oscillator and external crystal options | — |
| RoHS स्थिति | Compliant (green part) | — |
| लाइफसाइकिल स्थिति | Active | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 8 MHz |
| FLASH Program Memory | — | 32 KB (16K x 16) |
| Operating Voltage Range | — | 2.7 V to 5.5 V (ATMEGA32L) |
| General Purpose Working Registers | — | 32 x 8-bit |
| General Purpose I/O Lines | — | 32 |
| JTAG Interface | — | On-chip-debug and boundary scan |
| Active Mode Current | — | 1.1 mA (1 MHz, 3 V, 25 C) |
| Idle Mode Current | — | 0.35 mA (1 MHz, 3 V, 25 C) |
| Power-down Mode Current | — | < 1 uA |
| Throughput | — | Up to 8 MIPS at 8 MHz |
| Programmability | — | In-System Programmable (ISP) FLASH, self-programming |