ATMEGA324PV-10AU vs ATMEGA644P-15AT तुलना
विस्तृत दोनों ओर की तुलना ATMEGA324PV-10AU द्वारा Microchip Technology और ATMEGA644P-15AT द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA324PV-10AU - 8-bit AVR MCU, 32KB Flash, 10MHz, 44-TQFP | Microchip
ATMEGA324PV-10AU ✓ सक्रियMicrochip Technology
ATMEGA644P-15AT - 8-bit AVR MCU 64KB Flash 16MHz TQFP-44 | Microchip
ATMEGA644P-15AT Obsoleteविशेषता तुलना
| पैरामीटर | ATMEGA324PV-10AU | ATMEGA644P-15AT |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Core Architecture | AVR 8-bit RISC | AVR 8-bit enhanced RISC |
| Program Memory (Flash) | 32 KB (16K x 16) | 64 KB (32K x 16) |
| EEPROM | 1 KB | 2 KB |
| SRAM | 2 KB | 4 KB |
| Maximum CPU Frequency | 10 MHz | — |
| Supply Voltage Range | 1.8 V to 5.5 V | — |
| General-Purpose I/O | 32 | — |
| General-Purpose Registers | 32 | — |
| Instruction Set | 131 instructions, most single-cycle | — |
| Performance | Up to 10 MIPS at 10 MHz | — |
| USART | 2 | 2 (dual USART, 'P' variant) |
| SPI | 1 (master/slave) | 1 master/slave |
| TWI (I2C) | 1 byte-oriented | 1 byte-oriented |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit, with differential mode |
| Timer/Counters | 3 (with PWM and compare modes) | 3 with PWM and compare modes |
| Watchdog Timer | Yes, programmable with separate oscillator | Yes, programmable |
| Analog Comparator | Yes, on-chip | — |
| RTC | Yes, real-time counter | — |
| Debug Interface | JTAG / OCD (debugWIRE) | — |
| पैकेज | 44-pin TQFP (10x10 mm), 0.80 mm pitch | 44-pin TQFP (10x10 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Process Family | picoPower | — |
| RoHS स्थिति | Compliant | Compliant |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 16 MHz (at 5V) |
| Throughput | — | Up to 1 MIPS per MHz (16 MIPS peak) |
| Operating Voltage (VCC) | — | 2.7 V to 5.5 V |
| General-Purpose I/O Lines | — | 32 |
| AEC-Q100 Qualification | — | Grade 1 |
| In-System Programmable | — | Yes (Flash, Read-While-Write) |
| picoPower Technology | — | Yes |