ATMEGA32L-8MJ vs ATMEGA32A-AU तुलना
विस्तृत दोनों ओर की तुलना ATMEGA32L-8MJ द्वारा Microchip Technology और ATMEGA32A-AU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA32L-8MJ - 8-bit AVR MCU 32KB Flash 8MHz | Microchip
ATMEGA32L-8MJ ✓ सक्रियMicrochip Technology
ATMEGA32A-AU - 8-bit AVR MCU, 32KB Flash, 16MHz, TQFP-44 | Microchip
ATMEGA32A-AU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA32L-8MJ | ATMEGA32A-AU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Processor | AVR 8-bit RISC | — |
| Program Memory Size | 32 KB (16K x 16) Flash | — |
| Program Memory Type | In-System Programmable Flash with Read-While-Write | — |
| SRAM | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 8 MHz | 16 MHz |
| Operating Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Throughput | Up to 8 MIPS at 8 MHz | — |
| Instruction Set | 131 powerful instructions, most single-clock cycle | — |
| General Purpose Working Registers | 32 x 8-bit | — |
| I/O Lines | 32 programmable I/O lines | — |
| ADC | 8-channel 10-bit successive approximation | 8-channel, 10-bit |
| Timers | Three flexible timer/counters with compare modes | — |
| Connectivity | Two USART, SPI, Two-wire Serial Interface (I2C) | — |
| Debug Interface | JTAG (boundary-scan and on-chip debug) | JTAG (IEEE 1149.1 compliant) |
| पैकेज | 44-VQFN Exposed Pad (7x7 mm) | 44-pin TQFP (10x10 mm, 0.8 mm pitch) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | -40C to +85C | -40C to +85C (industrial) |
| RoHS स्थिति | Compliant | Compliant (Green) |
| सप्लाई करंट | [DATA_NEEDED: active supply current] | — |
| Manufacturer | — | Microchip Technology (formerly Atmel) |
| Series | — | AVR ATmega |
| Core Architecture | — | AVR RISC 8-bit |
| MIPS Throughput | — | 16 MIPS at 16 MHz |
| Program Memory (Flash) | — | 32 KB |
| I/O Pins | — | 32 programmable |
| Timers/Counters | — | Two 8-bit and one 16-bit |
| Communication Peripherals | — | USART, SPI, TWI (I2C) |