ATMEGA48-20PI vs ATMEGA88-20PI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48-20PI द्वारा Microchip Technology और ATMEGA88-20PI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48-20PI - AVR 8-Bit MCU 20MHz 4KB Flash 28-PDIP | Microchip
ATMEGA48-20PI ✗ जीवन की समाप्तिMicrochip Technology
ATMEGA88-20PI - 8KB Flash 20MHz AVR MCU 28-DIP | Microchip
ATMEGA88-20PI Obsoleteविशेषता तुलना
| पैरामीटर | ATMEGA48-20PI | ATMEGA88-20PI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | उत्पादन बंद | Obsolete |
| Core Processor | AVR | AVR |
| Core Size | 8-Bit | 8-bit |
| Speed | 20 MHz | — |
| Program Flash Memory | 4 KB (2K x 16) | — |
| SRAM | 512 x 8 B | — |
| EEPROM | 256 x 8 B | — |
| Supply Voltage (Vcc/Vdd) | 2.7 V to 5.5 V (1.8 V to 5.5 V family range) | — |
| ADC Resolution | 10 bit | — |
| ADC Channels | 8 | — |
| Connectivity | I2C, SPI, UART/USART | I2C, SPI, UART/USART |
| Timers | Two 8-bit, one 16-bit | 3 timer/counters with compare and PWM modes |
| ऑपरेटिंग तापमान | -40C to +85C (Industrial, I grade) | -40C to +85C (industrial) |
| पैकेज / केस | 28-PDIP (0.300 inch, 7.62 mm) | — |
| माउंटिंग प्रकार | Through Hole | Through Hole |
| MIPS Throughput | Up to 20 MIPS at 20 MHz | — |
| On-Chip Debug | debugWIRE | debugWIRE |
| Series | AVR ATmega | — |
| Max Clock Speed | — | 20 MHz |
| Program Memory Size | — | 8 KB (4K x 16) FLASH |
| Program Memory Type | — | FLASH (ISP, self-programming, read-while-write) |
| SRAM Size | — | 1 KB |
| EEPROM Size | — | 512 B |
| Operating Voltage Range | — | 1.8 V to 5.5 V |
| Peripherals | — | Brown-out Detect/Reset, POR, PWM, WDT |
| Number of I/O | — | 23 |
| ADC | — | 8-channel, 10-bit |
| Instructions | — | 131 instructions, most single-cycle |
| Throughput | — | Up to 20 MIPS at 20 MHz |
| पैकेज | — | 28-PDIP (0.300 in, 7.62 mm) |
| Part Status | — | Obsolete |