ATMEGA48A-PU vs ATMEGA88V-10PJ तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48A-PU द्वारा Microchip Technology और ATMEGA88V-10PJ द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48A-PU - 8-bit AVR MCU 4KB Flash 20MHz DIP-28 | Microchip
ATMEGA48A-PU ✓ सक्रियMicrochip Technology
ATMEGA88V-10PJ - 8KB AVR MCU, 1.8V, 28-PDIP | Microchip
ATMEGA88V-10PJ ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA48A-PU | ATMEGA88V-10PJ |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | AVR 8-bit RISC | — |
| Core Size | 8-bit | — |
| Speed | 20 MHz | — |
| Flash Memory | 4 KB (2K x 16) | — |
| EEPROM | 256 B | 512 B |
| SRAM | 512 B | 1 KB |
| सप्लाई वोल्टेज | 4.5 V to 5.5 V | — |
| I/O Count | 23 | — |
| Timers | 2 x 8-bit, 1 x 16-bit | — |
| ADC | 10-bit, 6 channels | 8-channel 10-bit |
| Serial Interfaces | USART, SPI, I2C (TWI) | — |
| ऑपरेटिंग तापमान | -40C to +85C | -40C to +85C (industrial) |
| पैकेज | 28-PDIP (through-hole) | 28-pin PDIP (PJ), through-hole |
| माउंटिंग प्रकार | Through Hole | Through-Hole |
| Life Cycle Stage | ACTIVE | — |
| ISP Capability | In-System Programmable Flash | — |
| Sleep Modes | 6 modes | — |
| Core Architecture | — | 8-bit AVR RISC |
| Flash Program Memory | — | 8 KB |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 10 MHz |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| I/O Lines | — | 23 |
| Timers/Counters | — | 2 x 8-bit, 1 x 16-bit |
| Communication Interfaces | — | USART, SPI, Two-Wire (I2C-compatible) |
| Throughput | — | Up to 10 MIPS (1 MIPS per MHz) |
| Instructions | — | 131 instructions, most single-cycle |
| On-Chip Debug | — | debugWIRE |
| Programming | — | ISP (In-System Programmable), self-programming Flash |
| Power Modes | — | 6 modes including power-down and power-save |