ATMEGA48P-20AUR vs ATMEGA48A-AU तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48P-20AUR द्वारा Microchip Technology और ATMEGA48A-AU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48P-20AUR - 8-bit AVR MCU 4KB Flash 20MHz 32-TQFP | Microchip
ATMEGA48P-20AUR ✓ सक्रियMicrochip Technology
ATMEGA48A-AU - 8-bit AVR MCU, 4KB Flash, 20MHz, TQFP-32 | Microchip
ATMEGA48A-AU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA48P-20AUR | ATMEGA48A-AU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | AVR 8-bit RISC |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 20 MHz | 20 MHz |
| Performance | Up to 20 MIPS at 20 MHz | — |
| Flash Memory | 4 KB (2K x 16) | — |
| EEPROM | 256 B | — |
| SRAM | 512 B | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| General Purpose I/O | 23 I/O lines | — |
| Timers/Counters | Three flexible timer/counters with compare modes | — |
| ADC | 10-bit, 6-channel | — |
| Serial Interfaces | USART, SPI, 2-wire (I2C-compatible) | — |
| पैकेज | 32-TQFP (7x7 mm) | 32-pin TQFP (7x7 mm) |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Life Cycle Stage | ACTIVE | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Programming | In-System Programmable (ISP) Flash | — |
| Power Technology | picoPower low-power features with sleep modes | — |
| MIPS Throughput | — | 20 MIPS |
| Program Memory (Flash) | — | 4 KB (2K x 16) |
| Data EEPROM | — | 256 B |
| Data SRAM | — | 512 B |
| General-Purpose I/O Lines | — | 23 |
| General-Purpose Working Registers | — | 32 |
| Supply Voltage (VCC) | — | 4.5 V to 5.5 V |
| ADC Resolution | — | 10-bit |
| ADC Channels | — | 8 |
| Timer/Counters | — | 3 (with compare modes) |
| PWM Channels | — | 6 |
| Communication Interfaces | — | SPI, TWI (I2C), USART |
| MSL स्तर | — | 3 (168 hours) |
| RoHS स्थिति | — | Compliant |