ATMEGA48P-20MMU vs ATMEGA48V-10MI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48P-20MMU द्वारा Microchip Technology और ATMEGA48V-10MI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48P-20MMU - 4KB Flash 20MHz AVR MCU QFN-28 | Microchip
ATMEGA48P-20MMU ✓ सक्रियMicrochip Technology
ATMEGA48V-10MI - 4KB Flash 1.8V AVR MCU QFN-32 | Microchip
ATMEGA48V-10MI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA48P-20MMU | ATMEGA48V-10MI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Clock Speed | 20 MHz | — |
| Flash Memory | 4 KB (2K x 16) ISP Flash | — |
| EEPROM | 256 B | 256 B |
| SRAM | 512 B | 512 B |
| सप्लाई वोल्टेज | 4.5 V to 5.5 V | — |
| I/O Ports | 23 general-purpose I/O lines | — |
| Working Registers | 32 x 8-bit general purpose | — |
| Timer/Counters | 3 flexible timer/counters with compare modes | — |
| Serial Interfaces | SPI, TWI, USART | USART, SPI, Two-Wire Interface (I2C) |
| ADC | 10-bit ADC | 8-channel 10-bit |
| Low Power Technology | picoPower | — |
| Programming | ISP / ICSP in-system programming | — |
| पैकेज | 28-VQFN (4x4 mm), 0.45 mm pitch, 1 mm height | 32-VFQFN Exposed Pad (MLF) 5x5 mm |
| Package Material | Green (RoHS) plastic | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Lifecycle Stage | ACTIVE | — |
| Flash Program Memory | — | 4 KB In-System Programmable |
| Maximum CPU Speed | — | 10 MHz (up to 10 MIPS) |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| GPIO Count | — | 23 I/O lines |
| Timers | — | 3 flexible timer/counters |
| On-Chip Debug | — | debugWIRE |
| ऑपरेटिंग तापमान | — | -40C to +85C (industrial) |
| Series | — | AVR ATmega48 |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS status] |