ATMEGA48PV-10MMU vs ATMEGA48V-10MI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48PV-10MMU द्वारा Microchip Technology और ATMEGA48V-10MI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48PV-10MMU - 8-bit AVR MCU 4KB Flash 10MHz | Microchip
ATMEGA48PV-10MMU ✓ सक्रियMicrochip Technology
ATMEGA48V-10MI - 4KB Flash 1.8V AVR MCU QFN-32 | Microchip
ATMEGA48V-10MI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA48PV-10MMU | ATMEGA48V-10MI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| Flash Memory | 4 KB (2K x 16) ISP FLASH | — |
| EEPROM | 256 B | 256 B |
| SRAM | 512 B | 512 B |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 10 MHz | — |
| Supply Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| ऑपरेटिंग तापमान | Industrial (-40C to +85C) | -40C to +85C (industrial) |
| Number of I/O Lines | 23 | — |
| Timers/Counters | 3 (with compare modes) | — |
| ADC | 10-bit, 6 channels | 8-channel 10-bit |
| Serial Interfaces | SPI, TWI (I2C-compatible), USART | USART, SPI, Two-Wire Interface (I2C) |
| Instructions | 131, most single-cycle | — |
| Performance | Up to 10 MIPS at 10 MHz | — |
| Low Power Technology | picoPower | — |
| पैकेज | 28-VQFN (MLF), 4x4 mm, 0.45 mm pitch, 1 mm height | 32-VFQFN Exposed Pad (MLF) 5x5 mm |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Programmability | In-System Programmable (ISP), read-while-write | — |
| RoHS स्थिति | Compliant (green package) | [DATA_NEEDED: RoHS status] |
| Flash Program Memory | — | 4 KB In-System Programmable |
| Maximum CPU Speed | — | 10 MHz (up to 10 MIPS) |
| GPIO Count | — | 23 I/O lines |
| Timers | — | 3 flexible timer/counters |
| On-Chip Debug | — | debugWIRE |
| Series | — | AVR ATmega48 |