ATMEGA48V-10PU vs ATMEGA88V-10PU तुलना
विस्तृत दोनों ओर की तुलना ATMEGA48V-10PU द्वारा Microchip Technology और ATMEGA88V-10PU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA48V-10PU - 4KB Flash AVR MCU, 1.8V, 10MHz | Microchip
ATMEGA48V-10PU ✓ सक्रियMicrochip Technology
ATMEGA88V-10PU - 8KB AVR MCU 10MHz 5V PDIP-28 | Microchip
ATMEGA88V-10PU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA48V-10PU | ATMEGA88V-10PU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Processor | AVR | AVR 8-bit RISC |
| Core Size | 8-Bit | 8-Bit |
| Speed | 10 MHz | — |
| Flash Memory Size | 4 KB (2K x 16) | — |
| EEPROM Size | 256 B | — |
| RAM Size | 512 B | — |
| Number of I/O | 23 | — |
| Operating Voltage Range | 1.8 V to 5.5 V | — |
| ADC Resolution | 10-bit | — |
| ADC Channels | 8 (TQFP/QFN); 6 accessible in PDIP | — |
| Timers | 3 (two 8-bit, one 16-bit) | — |
| Communication Interfaces | SPI, I2C (TWI), UART | USART, SPI, Two-Wire (I2C) |
| On-Chip Debug | debugWIRE | debugWIRE |
| ऑपरेटिंग तापमान | -40C to +85C (Industrial) | — |
| पैकेज | 28-PDIP (0.300 in, 7.62 mm) | 28-PDIP |
| माउंटिंग प्रकार | Through-Hole | Through Hole |
| Programmability | In-System Programmable (SPI ISP) | — |
| RoHS स्थिति | Compliant (GREEN) | — |
| Max Clock Speed | — | 10 MHz |
| Flash Memory | — | 8 KB (4K x 16) ISP Flash |
| EEPROM | — | 512 B |
| SRAM | — | 1 KB |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| General Purpose I/O | — | 23 lines |
| Working Registers | — | 32 x 8-bit |
| Instructions | — | 130 powerful instructions, most single-cycle |
| Timers/Counters | — | 3 flexible timer/counters with compare modes |
| ADC | — | 10-bit |
| In-System Programming | — | Yes (ISP, read-while-write) |
| Low Power Technology | — | picoPower |
| Speed Grade | — | -10 (10 MHz) |
| Throughput | — | 1 MIPS per MHz |