ATMEGA8515-16AI vs ATMEGA8515L-8AI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA8515-16AI द्वारा Microchip Technology और ATMEGA8515L-8AI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA8515-16AI - 8-bit AVR MCU, 16MHz, 8KB Flash, 44-TQFP | Microchip
ATMEGA8515-16AI NrndMicrochip Technology
ATMEGA8515L-8AI - AVR 8-Bit MCU, 8KB Flash, 8MHz | Microchip
ATMEGA8515L-8AI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA8515-16AI | ATMEGA8515L-8AI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | NRND | सक्रिय |
| Core Architecture | AVR 8-bit RISC | 8-bit AVR RISC |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 16 MHz | 8 MHz |
| Throughput | 16 MIPS (1 MIPS/MHz) | up to 8 MIPS at 8 MHz (16 MIPS at 16 MHz for 16 MHz grades) |
| Program Memory (Flash) | 8 KB (4K x 16) | 8 KB (4K x 16) In-System Programmable |
| SRAM (Internal) | 544 bytes | — |
| External SRAM Support | Up to 64 KB | up to 64 KB |
| EEPROM | 512 bytes | 512 bytes |
| General Purpose Registers | 32 x 8-bit | — |
| Instruction Set | 130 powerful instructions, mostly single-cycle | — |
| ADC | 8-channel, 10-bit SAR | — |
| Timer/Counters | 2 x 8-bit, 1 x 16-bit | — |
| Connectivity | SPI, UART, TWI (I2C-compatible) | — |
| Supply Voltage (Vcc) | 4.5 V to 5.5 V | — |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | -40C to +85C (industrial) |
| पैकेज | 44-TQFP (10x10 mm) | 44-TQFP (10 x 10 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| I/O Pins | 35 | — |
| Programmable Watchdog Timer | Yes, with separate on-chip oscillator | — |
| Power-down Mode Current | <1 uA (typical) | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status from datasheet] | RoHS compliant (lead-free 'I' suffix per Microchip nomenclature) |
| SRAM | — | 544 bytes internal |
| Operating Voltage Range | — | 2.7 V to 5.5 V |
| Instructions | — | 130 powerful instructions, most single-cycle |
| General Purpose I/O | — | 35 programmable I/O lines |
| Timers/Counters | — | 2 x 8-bit, 1 x 16-bit with PWM |
| Serial Interfaces | — | USART, SPI |
| In-Circuit Programming | — | ICSP via SPI (supported by MPLAB SNAP / AVR programmers) |