ATMEGA88P-20AUR vs ATMEGA88-20AI तुलना
विस्तृत दोनों ओर की तुलना ATMEGA88P-20AUR द्वारा Microchip Technology और ATMEGA88-20AI द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA88P-20AUR - 8-bit AVR MCU 20MHz 8KB Flash | Microchip
ATMEGA88P-20AUR ✓ सक्रियMicrochip Technology
ATMEGA88-20AI - 8-bit AVR MCU 20MHz 8KB Flash TQFP-32 | Microchip
ATMEGA88-20AI ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA88P-20AUR | ATMEGA88-20AI |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 20 MHz | — |
| Flash Memory | 8 KB (4K x 16) | — |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| Supply Voltage Range | 2.7 V to 5.5 V | 1.8 V to 5.5 V |
| Throughput | Up to 20 MIPS at 20 MHz | — |
| GPIO Count | 23 | 23 |
| ADC Resolution | 10-bit | 10-bit, 8 channels |
| ADC Channels | 8 | — |
| Communication Interfaces | USART, SPI, TWI (I2C) | USART, SPI, TWI (I2C) |
| Timers/Counters | 3 (two 8-bit, one 16-bit) | — |
| Debug System | debugWIRE on-chip debug | — |
| Instructions | 131, most single-cycle | — |
| पैकेज | 32-TQFP (7x7 mm) | 32-TQFP (7x7 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Low Power Technology | picoPower | — |
| Programming | ISP in-system, self-programming Flash | ISP, read-while-write Flash |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | -40C to +85C |
| RoHS स्थिति | Compliant | — |
| Core Processor | — | AVR 8-bit RISC |
| Core Size | — | 8-bit |
| Speed | — | 20 MHz |
| Flash Program Memory | — | 8 KB (4K x 16) |
| Max Clock at Full Voltage | — | 20 MHz at 4.5 V to 5.5 V |
| Timers | — | Two 8-bit, one 16-bit |
| MIPS Throughput | — | Up to 20 MIPS at 20 MHz |
| On-Chip Debug | — | DebugWIRE |
| Reset/Brown-out | — | Power-on Reset, Brown-out Detect/Reset |