ATMEGA88V-10MI vs ATMEGA88V-10MJ तुलना
विस्तृत दोनों ओर की तुलना ATMEGA88V-10MI द्वारा Microchip Technology और ATMEGA88V-10MJ द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA88V-10MI - 8KB Flash AVR MCU 10MHz QFN-32 | Microchip
ATMEGA88V-10MI ✓ सक्रियMicrochip Technology
ATMEGA88V-10MJ - 8-Bit AVR MCU, 8KB Flash, 1.8-5.5V | Microchip
ATMEGA88V-10MJ Obsoleteविशेषता तुलना
| पैरामीटर | ATMEGA88V-10MI | ATMEGA88V-10MJ |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Core Processor | AVR 8-bit RISC | AVR |
| Core Size | 8-bit | 8-Bit |
| Speed | 10 MHz | — |
| Flash Program Memory | 8 KB (4K x 16) | — |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| Supply Voltage Range | 1.8 V to 5.5 V | — |
| Number of I/O | 23 | — |
| ADC Resolution | 10-bit | — |
| ADC Channels | 8 | 8 channels, 10-bit |
| Timers/Counters | 2 x 8-bit, 1 x 16-bit | — |
| Communication Interfaces | USART, SPI, TWI (I2C-compatible) | USART, SPI, Two-Wire (I2C-compatible) |
| ऑपरेटिंग तापमान | -40C to +85C (industrial) | — |
| पैकेज | 32-VQFN (5x5 mm) exposed pad | 32-VQFN / MLF (32M1) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| On-Chip Debug | DebugWIRE | — |
| In-System Programming | Yes (ISP, read-while-write Flash) | — |
| RoHS स्थिति | Compliant | — |
| Program Flash Memory | — | 8 KB |
| Operating Voltage Range | — | 1.8 V to 5.5 V |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 10 MHz |
| Throughput | — | Up to 10 MIPS at 10 MHz |
| GPIO Count | — | 23 |
| Timers | — | 3 (two 8-bit, one 16-bit with compare modes) |
| Debug System | — | debugWIRE on-chip debug |
| Instructions | — | 131 instructions, mostly single-cycle |
| Sleep Modes | — | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby |