ATMEGA88V-10PU vs ATMEGA8A-PN तुलना
विस्तृत दोनों ओर की तुलना ATMEGA88V-10PU द्वारा Microchip Technology और ATMEGA8A-PN द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA88V-10PU - 8KB AVR MCU 10MHz 5V PDIP-28 | Microchip
ATMEGA88V-10PU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA88V-10PU | ATMEGA8A-PN |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Processor | AVR 8-bit RISC | AVR |
| Core Size | 8-Bit | 8-Bit |
| Max Clock Speed | 10 MHz | — |
| Flash Memory | 8 KB (4K x 16) ISP Flash | — |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB (1K x 8) |
| Supply Voltage Range | 1.8 V to 5.5 V | — |
| General Purpose I/O | 23 lines | — |
| Working Registers | 32 x 8-bit | — |
| Instructions | 130 powerful instructions, most single-cycle | — |
| Timers/Counters | 3 flexible timer/counters with compare modes | — |
| Communication Interfaces | USART, SPI, Two-Wire (I2C) | — |
| ADC | 10-bit | — |
| पैकेज | 28-PDIP | — |
| माउंटिंग प्रकार | Through Hole | Through Hole |
| In-System Programming | Yes (ISP, read-while-write) | — |
| On-Chip Debug | debugWIRE | — |
| Low Power Technology | picoPower | — |
| Speed Grade | -10 (10 MHz) | — |
| Throughput | 1 MIPS per MHz | — |
| Architecture | — | AVR enhanced RISC |
| Maximum Clock Speed | — | 16 MHz |
| Program Memory (Flash) | — | 8 KB (4K x 16) |
| Number of I/O | — | 23 |
| Operating Voltage Range | — | 2.7 V to 5.5 V |
| Connectivity | — | I2C (TWI), SPI, UART/USART |
| ADC Resolution | — | 10-bit |
| Timers | — | 3 Timer/Counters with compare modes |
| पैकेज / केस | — | 28-DIP (0.300 in, 7.62 mm) |
| ऑपरेटिंग तापमान | — | -40C to +105C |
| MIPS per MHz | — | up to 1 (approx.) |
| Product Status | — | Active |