ATMEGA8A-PU vs ATMEGA88V-10PJ तुलना
विस्तृत दोनों ओर की तुलना ATMEGA8A-PU द्वारा Microchip Technology और ATMEGA88V-10PJ द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATMEGA8A-PU - 8-bit AVR MCU 16MHz 8KB Flash DIP-28 | Microchip
ATMEGA8A-PU ✓ सक्रियMicrochip Technology
ATMEGA88V-10PJ - 8KB AVR MCU, 1.8V, 28-PDIP | Microchip
ATMEGA88V-10PJ ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATMEGA8A-PU | ATMEGA88V-10PJ |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | 8-bit AVR RISC | 8-bit AVR RISC |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 16 MHz | 10 MHz |
| Flash Memory | 8 KB (4K x 16) ISP | — |
| SRAM | 1 KB | 1 KB |
| EEPROM | 512 B | 512 B |
| Operating Voltage Range | 4.5 V to 5.5 V | — |
| General Purpose I/O Lines | 23 | — |
| Throughput | 16 MIPS at 16 MHz | Up to 10 MIPS (1 MIPS per MHz) |
| Instructions | 130 instructions, most single-cycle | 131 instructions, most single-cycle |
| Working Registers | 32 x 8 general purpose | — |
| Timers/Counters | Three flexible timer/counters with compare | 2 x 8-bit, 1 x 16-bit |
| पैकेज | 28-PDIP | 28-pin PDIP (PJ), through-hole |
| माउंटिंग प्रकार | Through Hole | Through-Hole |
| Life Cycle Stage | Active | — |
| Series | AVR ATmega | — |
| Hardware Multiplier | On-chip 2-cycle multiplier | — |
| Programming Interface | In-System Programming (ISP) via SPI | — |
| Flash Program Memory | — | 8 KB |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| I/O Lines | — | 23 |
| ADC | — | 8-channel 10-bit |
| Communication Interfaces | — | USART, SPI, Two-Wire (I2C-compatible) |
| On-Chip Debug | — | debugWIRE |
| ऑपरेटिंग तापमान | — | -40C to +85C (industrial) |
| Programming | — | ISP (In-System Programmable), self-programming Flash |
| Power Modes | — | 6 modes including power-down and power-save |