ATSAM3S1AA-MU vs ATSAM3S4AA-MU तुलना
विस्तृत दोनों ओर की तुलना ATSAM3S1AA-MU द्वारा Microchip Technology और ATSAM3S4AA-MU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM3S1AA-MU - Cortex-M3 64MHz MCU 64KB Flash | Microchip
ATSAM3S1AA-MU ✓ सक्रियMicrochip Technology
ATSAM3S4AA-MU - 64MHz Cortex-M3 256KB Flash MCU | Microchip
ATSAM3S4AA-MU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM3S1AA-MU | ATSAM3S4AA-MU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M3 (revision 2.0) | — |
| Core Size | 32-bit | 32-bit single-core |
| Maximum Clock Speed | 64 MHz | — |
| Program Memory Size | 64 KB (64K x 8) Flash | — |
| RAM Size | 16 KB (16K x 8) | — |
| Supply Voltage Range | 1.62 V to 3.6 V | — |
| Core Voltage | 1.08 V to 1.32 V (internal regulator) | — |
| पैकेज | 48-QFN (7x7 mm) | 48-QFN (7x7 mm) with exposed pad |
| Number of I/O | 47 | — |
| USB | Full Speed USB Device with embedded transceiver | USB 2.0 device |
| Memory Card Interface | High Speed MCI for SDIO/SD/MMC | — |
| External Bus Interface | Yes (EBI) | — |
| Instruction Set | Thumb-2 | Thumb-2 |
| Memory Protection | MPU (Memory Protection Unit) | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Temperature Grade | Industrial | — |
| Series | SAM3S | — |
| Compatibility | Pin-to-pin compatible with AT91SAM7S (48- and 64-pin versions) | — |
| Core Processor | — | ARM Cortex-M3 revision 2.0 |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 64 MHz |
| Flash Memory | — | 256 KB (256K x 8) |
| SRAM | — | 48 KB |
| सप्लाई वोल्टेज | — | 1.62 V to 3.6 V |
| Memory Protection Unit | — | Yes (MPU) |
| Flash Access Width | — | 128-bit with memory accelerator |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| ADC Resolution | — | [DATA_NEEDED: ADC resolution and channels] |
| Communication Interfaces | — | USART, SPI, TWI (I2C), USB |
| Debug Interface | — | SWD (Serial Wire Debug) |
| Legacy Compatibility | — | Pin-to-pin compatible with AT91SAM7S (48/64-pin) |
| Packaging | — | Tray |