ATSAM4L-XSTK vs ATSAMC21N-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAM4L-XSTK द्वारा Microchip Technology और ATSAMC21N-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4L-XSTK - SAM4L Xplained Pro Cortex-M4 Kit | Microchip
ATSAM4L-XSTK ✓ सक्रियMicrochip Technology
ATSAMC21N-XPRO - SAM C21N Xplained Pro MCU Eval Kit | Microchip
ATSAMC21N-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4L-XSTK | ATSAMC21N-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | MCU 32-bit Embedded Evaluation Board (Starter Kit) | MCU Evaluation Board (Xplained Pro) |
| Kit Family | SAM4L Xplained Pro Starter Kit | — |
| Target MCU Family | ATSAM4L (AT91SAM4 / SAM4L series) | — |
| Core Processor | ARM Cortex-M4, 32-bit | — |
| Core Frequency | up to 48 MHz | — |
| Active Mode Current | down to 90 uA/MHz (SAM4L MCU) | — |
| Sleep Mode | Full RAM retention (SAM4L MCU) | — |
| Display Controller | Segment LCD controller (SAM4L series) | — |
| On-board Debugger | EDBG (CMSIS-DAP, Virtual COM, Data Gateway) | — |
| Expansion | Xplained Pro extension headers | — |
| Supported IDE | Atmel Studio / Microchip Studio, Atmel START | — |
| Instruction Set | ARM (Thumb-2) | — |
| माउंटिंग प्रकार | Standalone benchtop development board | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | — |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage] | — |
| Target MCU | — | ATSAMC21N18A |
| Core | — | ARM Cortex-M0+ 32-bit |
| Maximum CPU Frequency | — | 48 MHz |
| Flash Memory | — | 256 KB |
| SRAM | — | 32 KB |
| Operating Voltage (VDD) | — | 2.7 V to 5.5 V |
| I/O Tolerance | — | 5 V |
| Communication Peripherals | — | 6x SERCOM, CAN-FD, I2C, SPI, UART |
| ADC / DAC | — | 12-bit ADC, 12-bit DAC |
| On-board Crypto IC | — | ATECC508A-MAHDA-T (UDFN-8) |
| Main Crystal Frequency | — | 16 MHz |
| RTC Crystal Frequency | — | 32.768 kHz |
| Debug Interface | — | EDBG (USB) + 10-pin Cortex Debug |
| Expansion Headers | — | 2x Xplained Pro 20-pin + 1x 10-pin mikroBUS |
| Supported IDEs | — | Microchip Studio, MPLAB X, Atmel Studio 7, Zephyr |
| USB Interface | — | USB Micro-B (power + EDBG + CDC + MSD) |
| Form Factor | — | Xplained Pro (approx. 80 x 60 mm) |