ATSAM4S-XSTK vs ATSAMC21N-XPRO तुलना
विस्तृत दोनों ओर की तुलना ATSAM4S-XSTK द्वारा Microchip Technology और ATSAMC21N-XPRO द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ सक्रियMicrochip Technology
ATSAMC21N-XPRO - SAM C21N Xplained Pro MCU Eval Kit | Microchip
ATSAMC21N-XPRO ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4S-XSTK | ATSAMC21N-XPRO |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Development Boards | Development Boards |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | MCU Evaluation Board (Xplained Pro) |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | ARM Cortex-M0+ 32-bit |
| Maximum CPU Frequency | 120 MHz | 48 MHz |
| Flash Memory | 2048 KB (2 MB) | 256 KB |
| SRAM | 160 KB | 32 KB |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | 6x SERCOM, CAN-FD, I2C, SPI, UART |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | — |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | Microchip Studio, MPLAB X, Atmel Studio 7, Zephyr |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS स्थिति | Compliant | Compliant |
| Target MCU | — | ATSAMC21N18A |
| Operating Voltage (VDD) | — | 2.7 V to 5.5 V |
| I/O Tolerance | — | 5 V |
| ADC / DAC | — | 12-bit ADC, 12-bit DAC |
| On-board Crypto IC | — | ATECC508A-MAHDA-T (UDFN-8) |
| Main Crystal Frequency | — | 16 MHz |
| RTC Crystal Frequency | — | 32.768 kHz |
| Debug Interface | — | EDBG (USB) + 10-pin Cortex Debug |
| Expansion Headers | — | 2x Xplained Pro 20-pin + 1x 10-pin mikroBUS |
| USB Interface | — | USB Micro-B (power + EDBG + CDC + MSD) |
| Form Factor | — | Xplained Pro (approx. 80 x 60 mm) |