ATSAM4S8CA-CU vs ATSAM4SD32CA-CUR तुलना
विस्तृत दोनों ओर की तुलना ATSAM4S8CA-CU द्वारा Microchip Technology और ATSAM4SD32CA-CUR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4S8CA-CU - ARM Cortex-M4 MCU 120MHz 512KB Flash | Microchip
ATSAM4S8CA-CU ✓ सक्रियMicrochip Technology
ATSAM4SD32CA-CUR - 120MHz Cortex-M4 MCU 2MB Flash | Microchip
ATSAM4SD32CA-CUR ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4S8CA-CU | ATSAM4SD32CA-CUR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | ARM Cortex-M4 | — |
| Core Width | 32-bit | — |
| Maximum Clock Speed | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | — |
| SRAM | 128 KB | 160 KB |
| Instruction Cache | 2 KB | — |
| DSP Extensions | Yes (single-cycle MAC, hardware multiply) | — |
| Memory Protection Unit (MPU) | Yes | — |
| Instruction Set | Thumb-2, ARM Cortex-M4 | — |
| Supply Voltage (Vcc/Vdd) | 1.62 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| पैकेज | 100-pin TFBGA (9x9 mm) | 100-ball TFBGA (9x9 mm) |
| External Bus Interface (EBI) | 16-bit (SDRAM/SRAM/NAND/NOR) | — |
| USB | USB 2.0 Full-Speed, on-chip transceiver | USB 2.0 Full-Speed Device/Host with on-chip PHY |
| CAN | CAN 2.0A/B | — |
| ADC | 12-bit | 16-bit, up to 24 channels, 1 Msps |
| Active Current | Approx. 30 mA at 100 MHz (per datasheet) | — |
| Back-up Mode Current (RTC, 1.8 V) | 3 uA | — |
| Pin-to-Pin Compatibility | SAM4S, SAM4N, SAM3S, SAM3N, SAM7S (64-/100-pin) | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount (Tape & Reel) |
| MSL स्तर | [DATA_NEEDED: MSL Level] | 3 (168 hours) |
| RoHS स्थिति | Compliant (per Heisener listing) | Compliant |
| Core | — | ARM Cortex-M4 with FPU |
| Maximum CPU Clock | — | 120 MHz |
| Program Memory | — | 2 MB Flash |
| Backup SRAM | — | 2 KB |
| Supply Voltage (VDDIO/VDD) | — | 1.62 V to 3.6 V |
| Core Voltage (internal LDO) | — | 1.2 V |
| Number of I/O Pins | — | Up to 79 |
| Ethernet MAC | — | 10/100 Mbps MII/RMII |
| Process Technology | — | [DATA_NEEDED: process node] |