ATSAM4SA16BB-ANR vs ATSAM4SA16CA-CU तुलना
विस्तृत दोनों ओर की तुलना ATSAM4SA16BB-ANR द्वारा Microchip Technology और ATSAM4SA16CA-CU द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
ATSAM4SA16BB-ANR - 1MB Flash, 120MHz Cortex-M4 MCU | Microchip
ATSAM4SA16BB-ANR ✓ सक्रियMicrochip Technology
ATSAM4SA16CA-CU - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
ATSAM4SA16CA-CU ✓ सक्रियविशेषता तुलना
| पैरामीटर | ATSAM4SA16BB-ANR | ATSAM4SA16CA-CU |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Clock | 120 MHz | — |
| Flash Memory | 1 MB (1024 KB) | — |
| SRAM | 160 KB | 160 KB |
| Operating Voltage | 1.62 V to 3.6 V | — |
| Core Operating Voltage | 1.2 V (internal regulator) | — |
| पैकेज | 64-LQFP (10x10 mm) | 100-pin TFBGA (9x9 mm) |
| पिन काउंट | 64 | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Temperature Grade | Industrial Extended (-40C to +85C) | — |
| Packaging | Tape & Reel | — |
| Silicon Revision | MRL B | — |
| RoHS स्थिति | RoHS Compliant (Green) | Compliant |
| USB Interface | Full-Speed USB Device | — |
| CAN | Yes (2 controllers per datasheet family) | — |
| ADC | 12-bit | — |
| DAC | 12-bit | — |
| MSL स्तर | 3 (per JEDEC J-STD-020) | — |
| Core Architecture | — | ARM Cortex-M4 with FPU and DSP |
| Bit Width | — | 32-bit |
| Maximum CPU Frequency | — | 120 MHz |
| Program Memory (Flash) | — | 1 MB (1024 KB) |
| Instruction Cache | — | 2 KB |
| MPU (Memory Protection Unit) | — | Yes |
| GPIO Lines | — | 79 |
| ऑपरेटिंग तापमान | — | -40C to +85C (Industrial) |
| सप्लाई वोल्टेज | — | 1.2 V core / 3.3 V I/O (typical) |
| External Bus Interface | — | 8-bit data, 24-bit address |
| ADC Resolution | — | 12-bit |
| DAC Resolution | — | 12-bit |
| DMA Channels | — | Multi-channel DMA + Peripheral DMA Controller (PDC) |
| Communication Interfaces | — | USB 2.0 FS, EMAC 10/100, 4x USART, 3x TWI, 2x SPI, 1x HS-SPI |
| Instruction Set | — | Thumb-2, DSP extensions |
| Pin-to-Pin Compatibility | — | SAM3N, SAM3S (64/100-pin), SAM7S legacy |